USB CDC library for MBED on STM32

Dependents:   PushToGo-F429

Revision:
0:7cf972f622d3
diff -r 000000000000 -r 7cf972f622d3 usbd_def.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/usbd_def.h	Sun Sep 09 19:03:18 2018 +0000
@@ -0,0 +1,331 @@
+/**
+  ******************************************************************************
+  * @file    usbd_def.h
+  * @author  MCD Application Team
+  * @version V2.4.2
+  * @date    11-December-2015
+  * @brief   General defines for the usb device library 
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DEF_H
+#define __USBD_DEF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+  * @{
+  */
+  
+/** @defgroup USB_DEF
+  * @brief general defines for the usb device library file
+  * @{
+  */ 
+
+/** @defgroup USB_DEF_Exported_Defines
+  * @{
+  */ 
+
+#ifndef NULL
+#define NULL  0
+#endif
+
+
+#define  USB_LEN_DEV_QUALIFIER_DESC                     0x0A
+#define  USB_LEN_DEV_DESC                               0x12
+#define  USB_LEN_CFG_DESC                               0x09
+#define  USB_LEN_IF_DESC                                0x09
+#define  USB_LEN_EP_DESC                                0x07
+#define  USB_LEN_OTG_DESC                               0x03
+#define  USB_LEN_LANGID_STR_DESC                        0x04
+#define  USB_LEN_OTHER_SPEED_DESC_SIZ                   0x09
+
+#define  USBD_IDX_LANGID_STR                            0x00 
+#define  USBD_IDX_MFC_STR                               0x01 
+#define  USBD_IDX_PRODUCT_STR                           0x02
+#define  USBD_IDX_SERIAL_STR                            0x03 
+#define  USBD_IDX_CONFIG_STR                            0x04 
+#define  USBD_IDX_INTERFACE_STR                         0x05 
+
+#define  USB_REQ_TYPE_STANDARD                          0x00
+#define  USB_REQ_TYPE_CLASS                             0x20
+#define  USB_REQ_TYPE_VENDOR                            0x40
+#define  USB_REQ_TYPE_MASK                              0x60
+
+#define  USB_REQ_RECIPIENT_DEVICE                       0x00
+#define  USB_REQ_RECIPIENT_INTERFACE                    0x01
+#define  USB_REQ_RECIPIENT_ENDPOINT                     0x02
+#define  USB_REQ_RECIPIENT_MASK                         0x03
+
+#define  USB_REQ_GET_STATUS                             0x00
+#define  USB_REQ_CLEAR_FEATURE                          0x01
+#define  USB_REQ_SET_FEATURE                            0x03
+#define  USB_REQ_SET_ADDRESS                            0x05
+#define  USB_REQ_GET_DESCRIPTOR                         0x06
+#define  USB_REQ_SET_DESCRIPTOR                         0x07
+#define  USB_REQ_GET_CONFIGURATION                      0x08
+#define  USB_REQ_SET_CONFIGURATION                      0x09
+#define  USB_REQ_GET_INTERFACE                          0x0A
+#define  USB_REQ_SET_INTERFACE                          0x0B
+#define  USB_REQ_SYNCH_FRAME                            0x0C
+
+#define  USB_DESC_TYPE_DEVICE                              1
+#define  USB_DESC_TYPE_CONFIGURATION                       2
+#define  USB_DESC_TYPE_STRING                              3
+#define  USB_DESC_TYPE_INTERFACE                           4
+#define  USB_DESC_TYPE_ENDPOINT                            5
+#define  USB_DESC_TYPE_DEVICE_QUALIFIER                    6
+#define  USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION           7
+#define  USB_DESC_TYPE_BOS                                 0x0F
+
+#define USB_CONFIG_REMOTE_WAKEUP                           2
+#define USB_CONFIG_SELF_POWERED                            1
+
+#define USB_FEATURE_EP_HALT                                0
+#define USB_FEATURE_REMOTE_WAKEUP                          1
+#define USB_FEATURE_TEST_MODE                              2
+
+#define USB_DEVICE_CAPABITY_TYPE                           0x10
+
+#define USB_HS_MAX_PACKET_SIZE                            512
+#define USB_FS_MAX_PACKET_SIZE                            64
+#define USB_MAX_EP0_SIZE                                  64
+
+/*  Device Status */
+#define USBD_STATE_DEFAULT                                1
+#define USBD_STATE_ADDRESSED                              2
+#define USBD_STATE_CONFIGURED                             3
+#define USBD_STATE_SUSPENDED                              4
+
+
+/*  EP0 State */    
+#define USBD_EP0_IDLE                                     0
+#define USBD_EP0_SETUP                                    1
+#define USBD_EP0_DATA_IN                                  2
+#define USBD_EP0_DATA_OUT                                 3
+#define USBD_EP0_STATUS_IN                                4
+#define USBD_EP0_STATUS_OUT                               5
+#define USBD_EP0_STALL                                    6    
+
+#define USBD_EP_TYPE_CTRL                                 0
+#define USBD_EP_TYPE_ISOC                                 1
+#define USBD_EP_TYPE_BULK                                 2
+#define USBD_EP_TYPE_INTR                                 3
+
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_DEF_Exported_TypesDefinitions
+  * @{
+  */
+
+typedef  struct  usb_setup_req 
+{
+    
+    uint8_t   bmRequest;                      
+    uint8_t   bRequest;                           
+    uint16_t  wValue;                             
+    uint16_t  wIndex;                             
+    uint16_t  wLength;                            
+}USBD_SetupReqTypedef;
+
+struct _USBD_HandleTypeDef;
+    
+typedef struct _Device_cb
+{
+  uint8_t  (*Init)             (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+  uint8_t  (*DeInit)           (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ /* Control Endpoints*/
+  uint8_t  (*Setup)            (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef  *req);  
+  uint8_t  (*EP0_TxSent)       (struct _USBD_HandleTypeDef *pdev );    
+  uint8_t  (*EP0_RxReady)      (struct _USBD_HandleTypeDef *pdev );  
+  /* Class Specific Endpoints*/
+  uint8_t  (*DataIn)           (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);   
+  uint8_t  (*DataOut)          (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); 
+  uint8_t  (*SOF)              (struct _USBD_HandleTypeDef *pdev); 
+  uint8_t  (*IsoINIncomplete)  (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); 
+  uint8_t  (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);   
+
+  uint8_t  *(*GetHSConfigDescriptor)(uint16_t *length); 
+  uint8_t  *(*GetFSConfigDescriptor)(uint16_t *length);   
+  uint8_t  *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
+  uint8_t  *(*GetDeviceQualifierDescriptor)(uint16_t *length);
+#if (USBD_SUPPORT_USER_STRING == 1)
+  uint8_t  *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index,  uint16_t *length);   
+#endif  
+  
+} USBD_ClassTypeDef;
+
+/* Following USB Device Speed */
+typedef enum 
+{
+  USBD_SPEED_HIGH  = 0,
+  USBD_SPEED_FULL  = 1,
+  USBD_SPEED_LOW   = 2,  
+}USBD_SpeedTypeDef;
+
+/* Following USB Device status */
+typedef enum {
+  USBD_OK   = 0,
+  USBD_BUSY,
+  USBD_FAIL,
+}USBD_StatusTypeDef;
+
+/* USB Device descriptors structure */
+typedef struct
+{
+  uint8_t  *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);  
+  uint8_t  *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); 
+  uint8_t  *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);  
+  uint8_t  *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);  
+  uint8_t  *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);  
+  uint8_t  *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);  
+  uint8_t  *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); 
+#if (USBD_LPM_ENABLED == 1)
+  uint8_t  *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); 
+#endif  
+} USBD_DescriptorsTypeDef;
+
+/* USB Device handle structure */
+typedef struct
+{ 
+  uint32_t                status;
+  uint32_t                total_length;    
+  uint32_t                rem_length; 
+  uint32_t                maxpacket;   
+} USBD_EndpointTypeDef;
+
+/* USB Device handle structure */
+typedef struct _USBD_HandleTypeDef
+{
+  uint8_t                 id;
+  uint32_t                dev_config;
+  uint32_t                dev_default_config;
+  uint32_t                dev_config_status; 
+  USBD_SpeedTypeDef       dev_speed; 
+  USBD_EndpointTypeDef    ep_in[15];
+  USBD_EndpointTypeDef    ep_out[15];  
+  uint32_t                ep0_state;  
+  uint32_t                ep0_data_len;     
+  uint8_t                 dev_state;
+  uint8_t                 dev_old_state;
+  uint8_t                 dev_address;
+  uint8_t                 dev_connection_status;  
+  uint8_t                 dev_test_mode;
+  uint32_t                dev_remote_wakeup;
+
+  USBD_SetupReqTypedef    request;
+  USBD_DescriptorsTypeDef *pDesc;
+  USBD_ClassTypeDef       *pClass;
+  void                    *pClassData;  
+  void                    *pUserData;    
+  void                    *pData;    
+} USBD_HandleTypeDef;
+
+/**
+  * @}
+  */ 
+
+
+
+/** @defgroup USBD_DEF_Exported_Macros
+  * @{
+  */ 
+#define  SWAPBYTE(addr)        (((uint16_t)(*((uint8_t *)(addr)))) + \
+                               (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
+
+#define LOBYTE(x)  ((uint8_t)(x & 0x00FF))
+#define HIBYTE(x)  ((uint8_t)((x & 0xFF00) >>8))
+#define MIN(a, b)  (((a) < (b)) ? (a) : (b))
+#define MAX(a, b)  (((a) > (b)) ? (a) : (b))
+
+
+#if  defined ( __GNUC__ )
+  #ifndef __weak
+    #define __weak   __attribute__((weak))
+  #endif /* __weak */
+  #ifndef __packed
+    #define __packed __attribute__((__packed__))
+  #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+   with the DMA during the transaction process should be 4-bytes aligned */    
+
+#if defined   (__GNUC__)        /* GNU Compiler */
+  #define __ALIGN_END    __attribute__ ((aligned (4)))
+  #define __ALIGN_BEGIN         
+#else                           
+  #define __ALIGN_END
+  #if defined   (__CC_ARM)      /* ARM Compiler */
+    #define __ALIGN_BEGIN    __align(4)  
+  #elif defined (__ICCARM__)    /* IAR Compiler */
+    #define __ALIGN_BEGIN 
+  #elif defined  (__TASKING__)  /* TASKING Compiler */
+    #define __ALIGN_BEGIN    __align(4) 
+  #endif /* __CC_ARM */  
+#endif /* __GNUC__ */ 
+  
+
+/**
+  * @}
+  */ 
+
+/** @defgroup USBD_DEF_Exported_Variables
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup USBD_DEF_Exported_FunctionsPrototype
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DEF_H */
+
+/**
+  * @}
+  */ 
+
+/**
+* @}
+*/ 
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+