Steve Wong
Attic fan controller
Dependencies: Chainable_RGB_LED DHT ESP8266Interface M2XStreamClient jsonlite mbed
Revision 0:4c3752fbe0a6, committed 2016-01-03
- Comitter:
- cantbewong
- Date:
- Sun Jan 03 19:03:51 2016 +0000
- Commit message:
- initial draft
Changed in this revision
diff -r 000000000000 -r 4c3752fbe0a6 Chainable_RGB_LED.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Chainable_RGB_LED.lib Sun Jan 03 19:03:51 2016 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/teams/Seeed/code/Chainable_RGB_LED/#50d0a66599e1
diff -r 000000000000 -r 4c3752fbe0a6 DHT.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DHT.lib Sun Jan 03 19:03:51 2016 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/teams/components/code/DHT/#df22ddf10d75
diff -r 000000000000 -r 4c3752fbe0a6 ESP8266Interface.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/ESP8266Interface.lib Sun Jan 03 19:03:51 2016 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/teams/ESP8266/code/ESP8266Interface/#03fd9333670d
diff -r 000000000000 -r 4c3752fbe0a6 M2XStreamClient.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/M2XStreamClient.lib Sun Jan 03 19:03:51 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/ATT-M2X-team/code/M2XStreamClient/#2610823f7f2e
diff -r 000000000000 -r 4c3752fbe0a6 jsonlite.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/jsonlite.lib Sun Jan 03 19:03:51 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/citrusbyte/code/jsonlite/#807034181e02
diff -r 000000000000 -r 4c3752fbe0a6 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sun Jan 03 19:03:51 2016 +0000
@@ -0,0 +1,74 @@
+#include "mbed.h"
+#include "ChainableLED.h"
+#include "M2XStreamClient.h"
+#include "ESP8266Interface.h"
+#include "TCPSocketConnection.h"
+
+DigitalOut myled(LED1);
+// ChainableLED(clk, data, number_of_leds)
+ChainableLED color_led(D4, D5, 1);
+#include "DHT.h"
+
+DHT sensor(D3, DHT11);
+DigitalOut relay(D6);
+
+/*
+* ESP8266 Wifi Config for nucleo 411
+*/
+ESP8266Interface wifi(D8,D2,D3,"SouthHackUp","",115200); // TX,RX,Reset,SSID,Password,Baud
+
+//
+// Fill these field in from you ATT M2X Account
+//
+char deviceId[] = "<deviceID>"; // Device you want to push to
+char streamName[] = "<streamID>"; // Stream you want to push to
+char m2xKey[] = "<deviceAPIKey>"; // Your M2X API Key or Master API Key
+
+
+int main() {
+// dht related
+ int error = 0;
+ float h = 0.0f, c = 0.0f, f = 0.0f, k = 0.0f, dp = 0.0f, dpf = 0.0f;
+
+
+ printf("Starting...\r\n");
+
+ // connect to wifi
+ wifi.init(); //Reset
+ wifi.connect(); //Use DHCP
+ printf("IP Address is %s \n\r", wifi.getIPAddress());
+
+ while(1) {
+ // generate random RGB values for LED's
+ uint8_t R = rand();
+ uint8_t G = rand();
+ uint8_t B = rand();
+ // print message to terminal
+ //printf("R=%x,G=%x,B=%x,",R,G,B);
+
+ // ChainableLED.setColorRGB(index_of_led, red, green, blue)
+ color_led.setColorRGB(0, R, G, B);
+ myled = 1; // LED is ON
+ relay = 1;
+
+ wait(1.0); // 200 ms
+
+
+ myled = 0; // LED is OFF
+ relay = 0;
+ error = sensor.readData();
+ if (0 == error) {
+ c = sensor.ReadTemperature(CELCIUS);
+ f = sensor.ReadTemperature(FARENHEIT);
+ k = sensor.ReadTemperature(KELVIN);
+ h = sensor.ReadHumidity();
+ dp = sensor.CalcdewPoint(c, h);
+ dpf = sensor.CalcdewPointFast(c, h);
+ printf("Temperature in Kelvin: %4.2f, Celcius: %4.2f, Farenheit %4.2f\r\n", k, c, f);
+ printf("Humidity is %4.2f, Dewpoint: %4.2f, Dewpoint fast: %4.2f\r\n", h, dp, dpf);
+ } else {
+ printf("Error: %d\n", error);
+ }
+ wait(1.0); // 1 sec
+ }
+}
diff -r 000000000000 -r 4c3752fbe0a6 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sun Jan 03 19:03:51 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/4336505e4b1c \ No newline at end of file