Bayley Wang / Mbed 2 deprecated qonly_controller

derp

Dependencies:   FastPWM3 mbed

config.h

Committer:
bwang
Date:
2016-03-09
Revision:
1:7b61790f6be9
Parent:
0:bac9c3a3a6ca
Child:
2:eabe8feaaabb

File content as of revision 1:7b61790f6be9:

#ifndef __CONFIG_H
#define __CONFIG_H

#define set_dtc(phase, value) *phase = 1.0f - (value)

#define PWMA PA_8
#define PWMB PA_9
#define PWMC PA_10
#define EN PB_15

#define IA PA_4
#define IB PB_0
#define TEST_DAC PA_5

#define PI 3.141593f
#define CPR 4096
#define POS_OFFSET 5.3f

#define I_SCALE_RAW 25.0f //mv/A
#define R_UP 12000.0f //ohms
#define R_DOWN 3600.0f //ohms
#define R_BIAS 3600.0f //ohms
#define AVDD 3300.0f //mV

#define I_OFFSET (AVDD * R_DOWN * R_UP / (R_DOWN * R_UP + R_BIAS * (R_DOWN + R_UP)))
#define I_SCALE (R_BIAS * R_DOWN * I_SCALE_RAW / (R_DOWN * R_UP + R_BIAS * (R_DOWN + R_UP)))

#define K_LOOP 5.0f
#define KI_BASE 0.01f
#define BUS_VOLTAGE 20.0f

#define KP (K_LOOP / BUS_VOLTAGE)
#define KI (KI_BASE * K_LOOP / BUS_VOLTAGE)

#endif