Diff: example.cpp

Revision:

5:7534fc9248a8

Parent:

4:fe1e9f9c7b33

--- a/example.cpp	Thu Oct 18 16:23:13 2018 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,98 +0,0 @@
-#include "sensors.h"
-#include "mbed.h"
-
-Serial usb2pc(PA_2, PA_3, 9600);  
-DigitalOut myled(PC_13);
-
-int main()
-{
-
-    
-    usb2pc.printf("starting\r\n");
-    sr501 x(PB_1);
-    BH1750 y(PB_7,PB_6);
-    mq z(PA_7,PA_6);
-    dht11 w(PA_5);
-    DS18B20 v(PC_14);
-    YL u(PA_1,PA_0);
-    BMP180 t(PB_9,PB_8);
-    GP2Y1010 s(PA_8,PB_0);
-    
-    while(1)
-    {
-        /*sr501
-        if(x.operator ==(true))
-        {
-            usb2pc.printf("get\r\n");
-            while(x.read()){usb2pc.printf("aaaaaaaaaaaaa\r\n");wait(0.1);myled=1;}
-            x.reset();
-        }
-        
-        else
-        {
-            usb2pc.printf("no\r\n");
-        }
-        wait(0.1);
-        */
-        /*BH1750
-        float light=y.getlightdata();
-        usb2pc.printf("Light intensity: %.4f Lux\r\n",light);
-        */
-        /*mq
-        if(z.operator==(true))
-        {
-            usb2pc.printf("mq on\r\n");
-            while(!z.read()){usb2pc.printf("%.3f\r\n",z.getairdata());wait(0.1);myled=1;}
-            myled = 1; // LED is ON
-            wait(0.2); // 200 ms
-            z.reset();
-        }
-        else
-        {
-            usb2pc.printf("mq off\r\n");
-            myled = 0; // LED is OFF
-            wait(1.0); // 1 sec
-        }
-        */
-        /*dht11
-        if(w.getdata())
-        {
-            usb2pc.printf("Humidity (%):%.3f\r\n",w.gethumidity());
-            usb2pc.printf("Temperature (oC): %.3f\r\n",w.gettemperature());
-        }
-        wait(2);
-        */
-        /*DS18B20
-        if(v.getdata())
-        {
-            usb2pc.printf("Temperature (oC): %.3f\r\n",v.gettemperature());
-        }
-        wait(2);
-        */
-        /*YL-38
-        if(u.operator==(true))
-        {
-            usb2pc.printf("YL on\r\n");
-            while(!u.read()){usb2pc.printf("%.3f\r\n",u.getairdata());wait(0.1);myled=1;}
-            myled = 1; // LED is ON
-            wait(0.2); // 200 ms
-            u.reset();
-        }
-        else
-        {
-            usb2pc.printf("YL off\r\n");
-            myled = 0; // LED is OFF
-            wait(1.0); // 1 sec
-        }
-        */
-        /*bmp180
-        usb2pc.printf("Temperature is  %.1f C\r\n", (float)t.BMP180GetTemperature()); 
-        usb2pc.printf("Pressure is  %.3f kPa\r\n", (float)t.BMP180GetPressure()/1000.0);
-        wait(1.0); 
-        */
-        /*GP2Y1010
-        usb2pc.printf("Dust Density: %.3f \r\n",s.getairdata()) ;
-        wait(1.0); 
-        */
-    }
-}
\ No newline at end of file