lwip_api_msg.c File Reference

Receive callback function for RAW netconns.

Doesn't 'eat' the packet, only copies it and sends it to conn->recvmbox

See also:

raw.h (struct raw_pcb.recv) for parameters and return value

Definition at line 100 of file lwip_api_msg.c.

Receive callback function for UDP netconns.

Posts the packet to conn->recvmbox or deletes it on memory error.

See also:

udp.h (struct udp_pcb.recv) for parameters

Receive callback function for TCP netconns. Posts the packet to conn->recvmbox, but doesn't delete it on errors.

See also:

tcp.h (struct tcp_pcb.recv) for parameters and return value

Poll callback function for TCP netconns. Wakes up an application thread that waits for a connection to close or data to be sent. The application thread then takes the appropriate action to go on.

Signals the conn->sem. netconn_close waits for conn->sem if closing failed.

See also:

tcp.h (struct tcp_pcb.poll) for parameters and return value

Sent callback function for TCP netconns. Signals the conn->sem and calls API_EVENT. netconn_write waits for conn->sem if send buffer is low.

See also:

tcp.h (struct tcp_pcb.sent) for parameters and return value

Error callback function for TCP netconns. Signals conn->sem, posts to all conn mboxes and calls API_EVENT. The application thread has then to decide what to do.

See also:

tcp.h (struct tcp_pcb.err) for parameters

Setup a tcp_pcb with the correct callback function pointers and their arguments.

Parameters:

conn	the TCP netconn to setup

Accept callback function for TCP netconns. Allocates a new netconn and posts that to conn->acceptmbox.

See also:

tcp.h (struct tcp_pcb_listen.accept) for parameters and return value

Create a new pcb of a specific type. Called from lwip_netconn_do_newconn().

Parameters:

msg	the api_msg_msg describing the connection type

Create a new pcb of a specific type inside a netconn. Called from netconn_new_with_proto_and_callback.

Parameters:

m	the api_msg_msg describing the connection type

Create a new netconn (of a specific type) that has a callback function. The corresponding pcb is NOT created!

Parameters:

t	the type of 'connection' to create (

See also:

enum netconn_type)

Parameters:

callback

a function to call on status changes (RX available, TX'ed)

Returns:

a newly allocated struct netconn or NULL on memory error

Delete a netconn and all its resources. The pcb is NOT freed (since we might not be in the right thread context do this).

Parameters:

conn	the netconn to free

Delete rcvmbox and acceptmbox of a netconn and free the left-over data in these mboxes

Parameters:

conn	the netconn to free bytes drained from recvmbox pending connections drained from acceptmbox

Internal helper function to close a TCP netconn: since this sometimes doesn't work at the first attempt, this function is called from multiple places.

Parameters:

conn	the TCP netconn to close

Delete the pcb inside a netconn. Called from netconn_delete.

Parameters:

m	the api_msg_msg pointing to the connection

Bind a pcb contained in a netconn Called from netconn_bind.

Parameters:

m	the api_msg_msg pointing to the connection and containing the IP address and port to bind to

TCP callback function if a connection (opened by tcp_connect/lwip_netconn_do_connect) has been established (or reset by the remote host).

See also:

tcp.h (struct tcp_pcb.connected) for parameters and return values

Connect a pcb contained inside a netconn Called from netconn_connect.

Parameters:

m	the api_msg_msg pointing to the connection and containing the IP address and port to connect to

Disconnect a pcb contained inside a netconn Only used for UDP netconns. Called from netconn_disconnect.

Parameters:

m	the api_msg_msg pointing to the connection to disconnect

Set a TCP pcb contained in a netconn into listen mode Called from netconn_listen.

Parameters:

m	the api_msg_msg pointing to the connection

Send some data on a RAW or UDP pcb contained in a netconn Called from netconn_send

Parameters:

m	the api_msg_msg pointing to the connection

Indicate data has been received from a TCP pcb contained in a netconn Called from netconn_recv

Parameters:

m	the api_msg_msg pointing to the connection

Indicate that a TCP pcb has been accepted Called from netconn_accept

Parameters:

m	the api_msg_msg pointing to the connection

See if more data needs to be written from a previous call to netconn_write. Called initially from lwip_netconn_do_write. If the first call can't send all data (because of low memory or empty send-buffer), this function is called again from sent_tcp() or poll_tcp() to send more data. If all data is sent, the blocking application thread (waiting in netconn_write) is released.

Parameters:

conn	netconn (that is currently in state NETCONN_WRITE) to process

Returns:

ERR_OK ERR_MEM if LWIP_TCPIP_CORE_LOCKING=1 and sending hasn't yet finished

Send some data on a TCP pcb contained in a netconn Called from netconn_write

Parameters:

m	the api_msg_msg pointing to the connection

Return a connection's local or remote address Called from netconn_getaddr

Parameters:

m	the api_msg_msg pointing to the connection

Close or half-shutdown a TCP pcb contained in a netconn Called from netconn_close In contrast to closing sockets, the netconn is not deallocated.

Parameters:

m	the api_msg_msg pointing to the connection

Join multicast groups for UDP netconns. Called from netconn_join_leave_group

Parameters:

m	the api_msg_msg pointing to the connection

Callback function that is called when DNS name is resolved (or on timeout). A waiting application thread is waked up by signaling the semaphore.

Execute a DNS query Called from netconn_gethostbyname

Parameters:

arg	the dns_api_msg pointing to the query

Definition at line 166 of file lwip_api_msg.c.