Diff: WS2801.cpp

Revision:

8:e3249c2b7607

Parent:

7:3025f0e0d70a

Child:

9:dd524af149e6

--- a/WS2801.cpp	Fri Oct 12 04:16:40 2012 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,123 +0,0 @@
-// Mbed library to control LPD8806-based RGB LED Strips
-// (c) 2011 Jelmer Tiete
-// This library is ported from the Arduino implementation of Adafruit Industries
-// found at: http://github.com/adafruit/LPD8806
-// and their strips: http://www.adafruit.com/products/306
-// Released under the MIT License: http://mbed.org/license/mit
-//
-// Parameterized and modified to use soft SPI.
-// Jas Strong <jasmine@electronpusher.org>
-/*****************************************************************************/
-
-#include "LedStrip.h"
-#include "WS2801.h"
-
-WS2801::WS2801(PinName dataPin, PinName clockPin, int n) :
-    dat(dataPin),
-    clk(clockPin) {
-    // Allocate 3 bytes per pixel:
-    numLEDs = n;
-    if ((pixels = (uint8_t *)malloc(numLEDs * 3))) {
-        memset(pixels, 0x00, numLEDs * 3); // Init to RGB 'off' state
-    }
-    guardtime.start();
-}
-
-/*
- *  Soft SPI clock-out implementation (CPOL = 0, CPHA = 0).
- *  Certainly not the fastest in the world but it'll do.
- *  Gets about 3.6 MHz;  could get several times as much
- *  using the bitbands directly  - jas.
- */
- 
-void WS2801::write(uint8_t byte) {
-    for (int i=0; i<8; i++) {
-        clk = 0;
-        wait_us(WS2801_DELAY);
-        dat = (byte & 0x80);
-        clk = 1;
-        wait_us(WS2801_DELAY);
-        byte <<= 1;
-    }
-    clk = 0;
-}
-
-void WS2801::begin(void) {
-    blank();
-    show();
-}
-
-uint16_t WS2801::numPixels(void) {
-    return numLEDs;
-}
-
-void WS2801::blank(void) {
-    memset(pixels, 0x00, numLEDs * 3);
-}
-
-// This is how data is pushed to the strip.  Unfortunately, the company
-// that makes the chip didnt release the  protocol document or you need
-// to sign an NDA or something stupid like that, but we reverse engineered
-// this from a strip controller and it seems to work very nicely!
-void WS2801::show(void) {
-    uint16_t i, nl3 = numLEDs * 3; // 3 bytes per LED
-    while (guardtime.read_us() < 500)
-        /* spin */;
-    for (i=0; i<nl3; i++ ) {
-        write(pixels[i]);
-    }
-
-    guardtime.reset();
-}
-
-
-uint32_t WS2801::total_luminance(void) {
-    uint32_t running_total;
-    running_total = 0;
-    for (int i=0; i<numLEDs*3; i++)
-        running_total += pixels[i];
-    return running_total;
-}
-
-// Convert R,G,B to combined 32-bit color
-uint32_t WS2801::Color(uint8_t r, uint8_t g, uint8_t b) {
-    // Take the lowest 7 bits of each value and append them end to end
-    // We have the top bit set high (its a 'parity-like' bit in the protocol
-    // and must be set!)
-    return ((uint32_t)g << 16) | ((uint32_t)r << 8) | (uint32_t)b;
-}
-
-// store the rgb component in our array
-void WS2801::setPixelColor(uint16_t n, uint8_t r, uint8_t g, uint8_t b) {
-    if (n >= numLEDs) return; // '>=' because arrays are 0-indexed
-
-    pixels[n*3  ] = g;
-    pixels[n*3+1] = r;
-    pixels[n*3+2] = b;
-}
-
-void WS2801::setPixelR(uint16_t n, uint8_t r) {
-    if (n >= numLEDs) return; // '>=' because arrays are 0-indexed
-
-    pixels[n*3+1] = r;
-}
-
-void WS2801::setPixelG(uint16_t n, uint8_t g) {
-    if (n >= numLEDs) return; // '>=' because arrays are 0-indexed
-
-    pixels[n*3] = g;
-}
-
-void WS2801::setPixelB(uint16_t n, uint8_t b) {
-    if (n >= numLEDs) return; // '>=' because arrays are 0-indexed
-
-    pixels[n*3+2] = b;
-}
-
-void WS2801::setPixelColor(uint16_t n, uint32_t c) {
-    if (n >= numLEDs) return; // '>=' because arrays are 0-indexed
-
-    pixels[n*3  ] = (c >> 16);
-    pixels[n*3+1] = (c >>  8);
-    pixels[n*3+2] =  c;
-}