Debugging tool for mbed enabled microcontrollers, especially for NUCLEO-F303RE and STM32F042F6P6.
Diff: Debug.h
- Revision:
- 12:a8ab6e018422
- Parent:
- 10:4d5f38d996e2
- Child:
- 15:83d4dced2a28
diff -r 90164cad21ed -r a8ab6e018422 Debug.h --- a/Debug.h Thu May 09 21:24:31 2019 +0000 +++ b/Debug.h Mon May 13 08:39:42 2019 +0000 @@ -1,6 +1,6 @@ #pragma once -// include files +// include libraries //------------------------------------------------------------------------------------------------------------------ #include "mbed.h" #include <stdlib.h> @@ -26,7 +26,7 @@ int number; } pin_t; - +//------------------------------------------------------------------------------------------------------------------ /** Debug_serial class. * Class for stepping programme and printing actual position of the running programme with optional print of one variable (int, float, char or char*). * Functions printf, putc and getc are also defined in the class. @@ -36,13 +36,13 @@ * // ---------------------------------------------------------------------------- * // Author: Lukas Bielesch * // Department of Measurement, Czech technical university in Prague, Czech Republic - * // Date of publication: 15. Apr 2019 + * // Date of publication: 13. May 2019 * // ---------------------------------------------------------------------------- * #include "Debug.h" * AnalogIn analog(PA_4); * PwmOut pwm(PA_6); * DigitalOut out(PA_5); - * Debug_serial pc(PA_2, PA_3, 115200); // + * Debug_serial pc(PA_2, PA_3, 115200); * * int main(){ * int var = 0; @@ -67,62 +67,64 @@ * } * @endcode */ -//------------------------------------------------------------------------------------------------------------------ class Debug_serial { public: - /** Create object of class Debug_serial - * @param tx_pin TX pin of serial port of the board - * @param rx_pin RX pin of serial port of the board - * @param baudrate desired baudrate value of debug serial port + /** Create object of Debug_serial class + * @param tx_pin TX pin of debug serial port + * @param rx_pin RX pin of debug serial port + * @param baudrate(optional) desired baudrate value of debug serial port, default baudrate is 115200 Bd/s */ Debug_serial(PinName tx_pin, PinName rx_pin, int baudrate = 115200); /** Perform one breakpoint without printing variable - * @param line_number line number of the breakpoint + * @param line_number(optional) line number of breakpoint,macro __LINE__ is recommended */ void breakpoint(int line_number = -1); /** Perform one breakpoint and print variable of type int - * @param line_number Line number of the breakpoint - * @param name name of printed variable(max length is 19) - * @param variable + * @param line_number line number of breakpoint, macro __LINE__ is recommended + * @param name name of printed variable(max length is 19) , macro name(variable) is recommended + * @param variable variable of type int */ void breakpoint(int line_number, char name[20], int variable); /** Perform one breakpoint and print variable of type char - * @param line_number Line number of the breakpoint - * @param name name of printed variable(max length is 19) - * @param variable + * @param line_number line number of breakpoint, macro __LINE__ is recommended + * @param name name of printed variable(max length is 19) , macro name(variable) is recommended + * @param variable variable of type int */ void breakpoint(int line_number, char name[20], char variable); - /** Perform one breakpoint and print variable of type string - * @param line_number Line number of the breakpoint - * @param name name of printed variable(max length is 19) - * @param variable + /** Perform one breakpoint and print string variable + * @param line_number line number of breakpoint, macro __LINE__ is recommended + * @param name name of printed variable(max length is 19) , macro name(variable) is recommended + * @param variable variable of type char* */ void breakpoint(int line_number, char name[20], char * variable); /** Perform one breakpoint and print variable of type float - * @param line_number Line number of the breakpoint - * @param name name of printed variable(max length is 19) - * @param variable + * @param line_number line number of breakpoint, macro __LINE__ is recommended + * @param name name of printed variable(max length is 19) , macro name(variable) is recommended + * @param variable variable of type float */ void breakpoint(int line_number, char name[20], float variable); /** Perform one breakpoint and print one register value - * @param line_number Line number of the breakpoint - * @param address + * @param line_number line number of breakpoint, macro __LINE__ is recommended + * @param address address of register, must be divisible by 4 */ void breakpoint(int line_number, uint32_t address); /** Print formatted string to debug serial port - * @param string - * @param format (optional) * @returns total number of printed characters or negative value if an output error or an encoding error */ int printf(const char* format, ...); + + /** Read formatted string from debug serial port + * @returns total number of successfully read arguments or negative value if en error occured + */ + int scanf(const char* format, ...); /** Print one character to debug serial port * @param character @@ -135,7 +137,14 @@ */ int getc(); + /** Check whether there is some character available to read from debug serial port. + * @returns true when there is something available to read + */ bool readable(); + + /** Check whether it is possible to write a character to debug serial port. + * @returns true when it is possible to write a character to debug serial port + */ bool writable(); private: @@ -144,8 +153,8 @@ protected: // objects: - Serial pc; //debug serial device -// variables: + Serial pc; //debug serial port +// variables int breakpoint_count; //stores number of the current breakpoint // functions // initialization function @@ -158,8 +167,7 @@ void clear_from_n_up_to_m(int m, int n); }; - - +//------------------------------------------------------------------------------------------------------------------ /** Debug_led class. * Class for stepping the program with debug LED and button, that is connected to GND(default) or VCC. @@ -169,7 +177,7 @@ * // ---------------------------------------------------------------------------- * // Author: Lukas Bielesch * // Department of Measurement, Czech technical university in Prague, Czech Republic - * // Date of publication: 15. Apr 2019 + * // Date of publication: 13. May 2019 * // ---------------------------------------------------------------------------- * #include "Debug.h" * AnalogIn analog(PA_0); @@ -193,7 +201,6 @@ * @endcode */ // class Debug_led -//------------------------------------------------------------------------------------------------------------------ class Debug_led { public: @@ -205,7 +212,7 @@ Debug_led(PinName led_pin, PinName button_pin, char mode[11] = "BUTTON_GND"); /** Perform one breakpoint - * @param number number of flashes of LED during the breakpoint(optional) + * @param number(optional) number of flashes of periodic flashing of LED during the breakpoint, default is constant flashing */ void breakpoint(int number = -1); @@ -215,27 +222,24 @@ InterruptIn button; //debug button // variables int button_mode; //mode of button 1->pullupt, 0->pulldown - volatile bool end_breakpoint; - int number_of_breakpoints; + volatile bool end_breakpoint; //true when button was pushed + int number_of_breakpoints; //number of the current breakpoint /** Initialization */ void init(char mode[11]); - /** Blinks the debug led n-times with blink period wait_time_ms */ + /** Blink the debug led n-times with blink period wait_time_ms */ void flash_n_times(int wait_time_ms, int n); - /** end the break after the button is pushed */ + /** IRQ function, end breakpoint after the button is pushed */ void end_break(); - - }; - +//------------------------------------------------------------------------------------------------------------------ /** Debug_register class. * * Example program: * @code - * //------------------------------------------------------------------------------------------------------------------ * // ---------------------------------------------------------------------------- * // Author: Lukas Bielesch * // Department of Measurement, Czech technical university in Prague, Czech Republic @@ -268,27 +272,28 @@ class Debug_register { public: - /** Create object of class Debug_serial - * @param tx_pin TX pin of serial port of the board - * @param rx_pin RX pin of serial port of the board - * @param baudrate desired baudrate value of debug serial port + /** Create object of Debug_register class + * @param tx_pin TX pin of debug serial port + * @param rx_pin RX pin of debug serial port + * @param baudrate(optional) desired baudrate value of debug serial port, default baudrate is 115200 Bd/s */ Debug_register(PinName tx_pin, PinName rx_pin, int baudrate = 115200); /** Perform one breakpoint and print one register - * @param line_number line number of the breakpoint - * @param address + * @param line_number line number of breakpoint, macro __LINE__ is recommended + * @param address address of register, must be divisible by 4 */ - void breakpoint(int line_number = -1, uint32_t address = 0); + void breakpoint(int line_number, uint32_t address); - - /** Print formatted string to debug serial port - * @param string - * @param format (optional) * @returns total number of printed characters or negative value if an output error or an encoding error */ int printf(const char* format, ...); + + /** Read formatted string from debug serial port + * @returns total number of successfully read arguments or negative value if en error occured + */ + int scanf(const char* format, ...); /** Print one character to debug serial port * @param character @@ -301,31 +306,35 @@ */ int getc(); + /** Check whether there is some character available to read from debug serial port. + * @returns true when there is something available to read + */ bool readable(); + + /** Check whether it is possible to write a character to debug serial port. + * @returns true when it is possible to write a character to debug serial port + */ bool writable(); protected: // objects: Serial pc; //debug serial device // variables: - int breakpoint_count; //stores number of the current breakpoint + int breakpoint_count; //number of the current breakpoint // functions // initialization function void init(); // clear screen from m line up to n line void clear_from_n_up_to_m(int m, int n); + //modify actual address or register value according to position in terminal uint32_t modify_value(uint32_t value, int horizontal); - }; - - - +//------------------------------------------------------------------------------------------------------------------ /** Debug_register_print class. * * Example program: * @code - * //------------------------------------------------------------------------------------------------------------------ * // ---------------------------------------------------------------------------- * // Author: Lukas Bielesch * // Department of Measurement, Czech technical university in Prague, Czech Republic @@ -354,33 +363,37 @@ class Debug_register_print { public: - /** Create object of class Debug_serial - * @param tx_pin TX pin of serial port of the board - * @param rx_pin RX pin of serial port of the board - * @param baudrate desired baudrate value of debug serial port + /** Create object of Debug_register_print class + * @param tx_pin TX pin of debug serial port + * @param rx_pin RX pin of debug serial port + * @param baudrate(optional) desired baudrate value of debug serial port, default baudrate is 115200 Bd/s */ Debug_register_print(PinName tx_pin, PinName rx_pin, int baudrate = 115200); - - void format(int break_number = 2, int line = 2, int address = 1, int value = 1); + /** Set format of breakpoint message + * @param break_number format of number of actual breakpoint: 0->not show, 1->show in hexadecimal, 2->show in decimal(default) + * @param line format of line of actual breakpoint: 0->not show, 1->show in hexadecimal, 2->show in decimal(default) + * @param address format of address of register: 0->not show, 1->show in hexadecimal(default), 2->show in decimal + * @param value format of register value: 0->not show, 1->show in hexadecimal, 2->show in decimal, 3->show in binary(default) + */ + void format(int break_number = 2, int line = 2, int address = 1, int value = 3); - /** Perform one breakpoint and print one register - * @param line_number line number of the breakpoint - * @param address - * @param offset + /** Perform one breakpoint and print one register value + * @param line_number line number of breakpoint, macro __LINE__ is recommended + * @param address address of register , must be divisible by 4 */ - void breakpoint(int line_number = -1, uint32_t address = 0, int number_of_words = 1); + void breakpoint(int line_number, uint32_t address, int number_of_words = 1); protected: // objects: Serial pc; //debug serial device // variables: - int breakpoint_count; //stores number of the current breakpoint - int count_format; - int line_format; - int address_format; - int register_format; + int breakpoint_count; //number of the current breakpoint + int count_format; // format of breakpoint count, 0->not show, 1->show in hexadecimal, 2->show in decimal + int line_format; // format of lineof breakpoint, 0->not show, 1->show in hexadecimal, 2->show in decimal + int address_format; // format of address of register, 0->not show, 1->show in hexadecimal, 2->show in decimal + int register_format;// format of register value, 0->not show, 1->show in hexadecimal, 2->show in decimal, 3->show in binary // functions // initialization function void init();