Revision 0:69e25b5e9580, committed 2018-07-30

Comitter:

bhavanapotturi

Date:

Mon Jul 30 14:19:56 2018 +0000

Commit message:

added definitions

Changed in this revision

diff -r 000000000000 -r 69e25b5e9580 MAX2871.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MAX2871.lib	Mon Jul 30 14:19:56 2018 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/MI/code/max2871/#b47819dab536

diff -r 000000000000 -r 69e25b5e9580 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Jul 30 14:19:56 2018 +0000
@@ -0,0 +1,76 @@
+#include "mbed.h"
+#include <stdio.h>
+
+#include "MAX2871.h"
+
+int main() {
+    
+#define D6   P0_6
+#define D8   P1_4
+#define D9   P1_5
+#define D10  P1_3
+#define D11  P1_1
+#define D12  P1_2
+#define D13  P1_0
+
+    
+    SPI         spi(D11,D12,D13);           //mosi, miso, sclk
+    Serial      pc(USBTX,USBRX,9600);       //tx, rx, baud
+
+    DigitalOut  le(D10,1);                  //Latch enable pin for MAX2871
+    DigitalIn   ld(D6);                     //Lock detect output pin
+    DigitalOut  led(LED_BLUE,1);            //blue LED on MAX32600MBED board
+
+    DigitalOut  rfouten(D8,1);              //RF output enable pin
+    DigitalOut  ce(D9,1);                   //Chip enable pin 
+    
+    double freq_entry;                  //variable to store user frequency input
+    char buffer[256];                   //array to hold string input from terminal
+    
+    double v_tune, temperature;         //stores TUNE voltage and die temperature of MAX2871
+    uint32_t vco;                       //stores active VCO in use
+    double freq_rfouta;                 //variable to calculate ouput frequency from register settings
+    
+    spi.format(8,0);                    //CPOL = CPHA = 0, 8 bits per frame
+    spi.frequency(1000000);             //1 MHz SPI clock
+
+    MAX2871 max2871(spi,D10);           //create object of class MAX2871, assign latch enable pin
+    
+    max2871.powerOn(true);              //set all hardware enable pins and deassert software shutdown bits
+    
+    max2871.setPFD(50.0,2);             //inputs are reference frequency and R divider to set phase/frequency detector comparison frequency
+    
+    //The routine in the while(1) loop will ask the user to input a desired
+    //output frequency, check that it is in range, calculate the corresponding
+    //register settings, update the MAX2871 registers, and then independently
+    //use the programmed values to re-calculate the output frequency chosen
+    while(1){
+        pc.printf("\n\rEnter a frequency in MHz:");
+        fgets(buffer,256,stdin);  
+         pc.printf("Line: %s\n", buffer);                          //store entry as string until newline entered
+        freq_entry = floor(1000*atof(buffer))/1000;         //convert string to a float with 1kHz precision
+        if((freq_entry < 23.5) || (freq_entry > 6000.0))    //check the entered frequency is in MAX2871 range
+            pc.printf("\n\rNot a valid frequency entry.");  
+        else
+        {
+            pc.printf("\n\rTarget: %.3f MHz",freq_entry);   //report the frequency derived from user's input
+            max2871.setRFOUTA(freq_entry);                  //update MAX2871 registers for new frequency
+
+            while(!ld)                                      //blink an LED while waiting for MAX2871 lock detect signal to assert
+            {
+                led = !led;
+                wait_ms(30);
+            }
+            led = 1;
+        
+            vco = max2871.readVCO();                        //read the active VCO from MAX2871
+            v_tune = max2871.readADC();                     //read the digitized TUNE voltage
+            freq_rfouta = max2871.getRFOUTA();              //calculate the output frequency of channel A
+            temperature = max2871.readTEMP();               //read die temperature from MAX2871
+
+            //print the achieved output frequency and MAX2871 diagnostics
+            pc.printf("\n\rActual: %.3f MHz",freq_rfouta);
+            pc.printf("\n\rVTUNE: %.3f V, VCO: %d, TEMP: %f",v_tune,vco,temperature);
+        }
+    }   
+}

diff -r 000000000000 -r 69e25b5e9580 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Mon Jul 30 14:19:56 2018 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/7130f322cb7e
\ No newline at end of file