Diff: main.cpp

Revision:

0:5738799d7a56

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Oct 28 07:42:46 2020 +0000
@@ -0,0 +1,277 @@
+/* WiFi Example
+ * Copyright (c) 2018 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "TCPSocket.h"
+#include <DigitalIn.h>
+ 
+#define WIFI_IDW0XX1    2
+
+#define TS_DEVICE "StmWifi" //mettre le nom de votre canal TS
+#define thingspeak_APIkey_write "SOSW9VB0YR0D0GF8" //mettre la clé d'écriture de votre canal TS
+#define thingspeak_APIkey_read "YEBSWYV532L13T23" //mettre la clé lecture de votre canal TS
+
+
+#if (defined(TARGET_DISCO_L475VG_IOT01A) || defined(TARGET_DISCO_F413ZH))
+#include "ISM43362Interface.h"
+
+ISM43362Interface wifi(MBED_CONF_APP_WIFI_SPI_MOSI, MBED_CONF_APP_WIFI_SPI_MISO, MBED_CONF_APP_WIFI_SPI_SCLK, MBED_CONF_APP_WIFI_SPI_NSS, MBED_CONF_APP_WIFI_RESET, MBED_CONF_APP_WIFI_DATAREADY, MBED_CONF_APP_WIFI_WAKEUP, false);
+
+#else // External WiFi modules
+
+#if MBED_CONF_APP_WIFI_SHIELD == WIFI_IDW0XX1
+#include "SpwfSAInterface.h"
+SpwfSAInterface wifi(MBED_CONF_APP_WIFI_TX, MBED_CONF_APP_WIFI_RX);
+#endif // MBED_CONF_APP_WIFI_SHIELD == WIFI_IDW0XX1
+
+#endif
+char hostName[] = "8406e1ca8b3e.ngrok.io";
+char cardId[] = "carte_9";
+char sensorId[256];
+DigitalIn sensorIn(D8);
+
+int sensorState = 0;
+const char *sec2str(nsapi_security_t sec)
+{
+    switch (sec) {
+        case NSAPI_SECURITY_NONE:
+            return "None";
+        case NSAPI_SECURITY_WEP:
+            return "WEP";
+        case NSAPI_SECURITY_WPA:
+            return "WPA";
+        case NSAPI_SECURITY_WPA2:
+            return "WPA2";
+        case NSAPI_SECURITY_WPA_WPA2:
+            return "WPA/WPA2";
+        case NSAPI_SECURITY_UNKNOWN:
+        default:
+            return "Unknown";
+    }
+}
+
+int scan_wifi(WiFiInterface *wifi)
+{
+    WiFiAccessPoint *ap;
+
+    printf("Scan:\n");
+
+    int count = wifi->scan(NULL,0);
+    printf("%d networks available.\n", count);
+
+    /* Limit number of network arbitrary to 15 */
+    count = count < 15 ? count : 15;
+
+    ap = new WiFiAccessPoint[count];
+    count = wifi->scan(ap, count);
+    for (int i = 0; i < count; i++)
+    {
+        printf("Network: %s secured: %s BSSID: %hhX:%hhX:%hhX:%hhx:%hhx:%hhx RSSI: %hhd Ch: %hhd\n", ap[i].get_ssid(),
+               sec2str(ap[i].get_security()), ap[i].get_bssid()[0], ap[i].get_bssid()[1], ap[i].get_bssid()[2],
+               ap[i].get_bssid()[3], ap[i].get_bssid()[4], ap[i].get_bssid()[5], ap[i].get_rssi(), ap[i].get_channel());
+    }
+
+    delete[] ap;
+    return count;
+}
+void http_demo(NetworkInterface *net)
+{
+    TCPSocket socket;
+    nsapi_error_t response;
+
+    printf("Sending HTTP request to ngrok.io...\n");
+
+    // Open a socket on the network interface, and create a TCP connection to www.arm.com
+    socket.open(net);
+    response = socket.connect(hostName, 80);
+    if(0 != response) {
+        printf("Error connecting: %d\n", response);
+        socket.close();
+        return;
+    }
+
+    // Send a simple http request
+    char sbuffer[256];
+    sprintf(sbuffer, "GET /api/v1/sensor/identify HTTP/1.1\r\nHost: %s\r\n\r\n", hostName);
+    nsapi_size_t size = strlen(sbuffer);
+    response = 0;
+    while(size)
+    {
+        response = socket.send(sbuffer+response, size);
+        if (response < 0) {
+            printf("Error sending data: %d\n", response);
+            socket.close();
+            return;
+        } else {
+            size -= response;
+            // Check if entire message was sent or not
+            printf("sent %d [%.*s]\n", response, strstr(sbuffer, "\r\n")-sbuffer, sbuffer);
+        }
+    }
+
+    // Recieve a simple http response and print out the response line
+    char rbuffer[64];
+    response = socket.recv(rbuffer, sizeof rbuffer);
+    if (response < 0) {
+        printf("Error receiving data: %d\n", response);
+    } else {
+        printf("recv %d [%.*s]\n", response, strstr(rbuffer, "\r\n")-rbuffer, rbuffer);
+    }
+
+    // Close the socket to return its memory and bring down the network interface
+    socket.close();
+}
+void authentificate(NetworkInterface *net){
+    TCPSocket socket;
+    nsapi_error_t response;
+
+    printf("Sending HTTP request to host...\n");
+
+    // Open a socket on the network interface, and create a TCP connection to www.arm.com
+    socket.open(net);
+    response = socket.connect(hostName, 80);
+    if(0 != response) {
+        printf("Error connecting: %d\n", response);
+        socket.close();
+        return;
+    }
+
+    // Send a simple http request
+    char sbuffer[256];
+    sprintf(sbuffer, "GET /api/v1/sensor/identify?sensorId=%s HTTP/1.1\r\nHost: %s\r\n\r\n", cardId,hostName);
+    nsapi_size_t size = strlen(sbuffer);
+    response = 0;
+    while(size)
+    {
+        response = socket.send(sbuffer+response, size);
+        if (response < 0) {
+            printf("Error sending data: %d\n", response);
+            socket.close();
+            return;
+        } else {
+            size -= response;
+            // Check if entire message was sent or not
+            printf("sent %d [%.*s]\n", response, strstr(sbuffer, "\r\n")-sbuffer, sbuffer);
+        }
+    }
+
+    // Recieve a simple http response and print out the response line
+    char rbuffer[64];
+    response = socket.recv(rbuffer, sizeof rbuffer);
+    if (response < 0) {
+        printf("Error receiving data: %d\n", response);
+    } else {
+        printf("recv %d [%.*s]\n", response, strstr(rbuffer, "\r\n")-rbuffer, rbuffer);
+    }
+
+    // Close the socket to return its memory and bring down the network interface
+    socket.close();
+}
+void updateStatus(NetworkInterface *net){
+    TCPSocket socket;
+    nsapi_error_t response;
+
+    printf("Sending HTTP request to ngrok.io...\n");
+
+    // Open a socket on the network interface, and create a TCP connection to www.arm.com
+    socket.open(net);
+    response = socket.connect(hostName, 80);
+    if(0 != response) {
+        printf("Error connecting: %d\n", response);
+        socket.close();
+        return;
+    }
+
+    // Send a simple http request
+    char sbuffer[256];
+    if(!sensorState){
+        sprintf(sbuffer, "GET /api/v1/sensor/update?sensorId=%s&state=1 HTTP/1.1\r\nHost: %s\r\n\r\n", cardId, hostName);
+    } else {
+        sprintf(sbuffer, "GET /api/v1/sensor/update?sensorId=%s&state= HTTP/1.1\r\nHost: %s\r\n\r\n", cardId , hostName);
+        
+    }
+    // sprintf(sbuffer, "GET /api/v1/sensor/update?sensorId=%s&state=%d HTTP/1.1\r\nHost: %s\r\n\r\n", cardId, sensorState, hostName);
+    nsapi_size_t size = strlen(sbuffer);
+    response = 0;
+    while(size)
+    {
+        response = socket.send(sbuffer+response, size);
+        if (response < 0) {
+            printf("Error sending data: %d\n", response);
+            socket.close();
+            return;
+        } else {
+            size -= response;
+            // Check if entire message was sent or not
+            printf("sent %d [%.*s]\n", response, strstr(sbuffer, "\r\n")-sbuffer, sbuffer);
+        }
+    }
+
+    // Recieve a simple http response and print out the response line
+    char rbuffer[64];
+    response = socket.recv(rbuffer, sizeof rbuffer);
+    if (response < 0) {
+        printf("Error receiving data: %d\n", response);
+    } else {
+        printf("recv %d [%.*s]\n", response, strstr(rbuffer, "\r\n")-rbuffer, rbuffer);
+    }
+
+    // Close the socket to return its memory and bring down the network interface
+    socket.close();
+}
+
+int main()
+{   
+    int previousState;
+    int count = 0;
+
+    printf("WiFi connect attempt\n\n");
+    count = scan_wifi(&wifi);
+    if (count == 0) {
+        printf("No WIFI APNs found - can't continue further.\n");
+        //return -1;
+    }
+    
+    
+    printf("\nConnecting to %s...\n", MBED_CONF_APP_WIFI_SSID);
+    int ret = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2);
+    if (ret != 0) {
+        printf("\nConnection error\n");
+        return -1;
+    }
+    printf("Success\n\n");
+    printf("MAC: %s\n", wifi.get_mac_address());
+    printf("IP: %s\n", wifi.get_ip_address());
+    printf("Netmask: %s\n", wifi.get_netmask());
+    printf("Gateway: %s\n", wifi.get_gateway());
+    printf("RSSI: %d\n\n", wifi.get_rssi());
+
+    http_demo(&wifi);
+    authentificate(&wifi);
+    sensorState =  sensorIn.read();
+    updateStatus(&wifi);
+    while(true){
+        previousState = sensorState;
+        sensorState =  sensorIn.read();
+        if(previousState != sensorState){
+            printf("Sensor = %d\n",sensorState);
+            updateStatus(&wifi);
+        }
+        // wait(1.0); 
+        //printf("Sensor %s", digitalRead(9));
+    }
+    wifi.disconnect();
+}
\ No newline at end of file