![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
1
Diff: README.md
- Revision:
- 87:dda31ae09824
- Parent:
- 86:92e4be20dc8b
- Child:
- 88:20f23913c4a7
diff -r 92e4be20dc8b -r dda31ae09824 README.md --- a/README.md Mon Nov 26 14:00:04 2018 +0000 +++ b/README.md Mon Dec 17 10:00:03 2018 +0000 @@ -24,7 +24,6 @@ * [NUCLEO-F401RE](https://os.mbed.com/platforms/ST-Nucleo-F401RE/) with [X-NUCLEO-IDW04A1](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw04a1.html) Wi-Fi expansion board using pins D8 and D2 _(of the Arduino connector)_. * [NUCLEO-F401RE](https://os.mbed.com/platforms/ST-Nucleo-F401RE/) with [X-NUCLEO-IDW01M1](https://os.mbed.com/components/X-NUCLEO-IDW01M1/) Wi-Fi expansion board using pins PA_9 and PA_10 _(of the Morpho connector)_. * [NUCLEO-F429ZI](https://os.mbed.com/platforms/ST-Nucleo-F429ZI/) with ESP8266-01 module using pins D1 and D0. - * [NUCLEO-L476RG](https://os.mbed.com/platforms/ST-Nucleo-L476RG/) with ESP8266-01 module using pins D8 and D2. * Other Mbed targets with an ESP8266 module, [X-NUCLEO-IDW04A1](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw04a1.html) or [X-NUCLEO-IDW01M1](https://os.mbed.com/components/X-NUCLEO-IDW01M1/) expansion board. #### Adding connectivity driver @@ -43,8 +42,6 @@ To connect the ESP8266 module to your development board, look at the [ESP8266 Cookbook page](https://developer.mbed.org/users/4180_1/notebook/using-the-esp8266-with-the-mbed-lpc1768/). In general, this means hooking up the ESP8266 TX pin to `D0` and the ESP8266 RX pin to `D1` on your development board. -**Note:** On NUCLEO development boards, pins `D0` and `D1` are used for serial communication with the computer. Use pins `D8` (to ESP8266 TX) and `D2` (to ESP8266 RX) instead. - #### Connecting the X-NUCLEO-IDW0XX1 #### To connect the [X-NUCLEO-IDW04A1](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw04a1.html) or [X-NUCLEO-IDW01M1](https://developer.mbed.org/components/X-NUCLEO-IDW01M1/) expansion board to your NUCLEO development board, plug the expansion board on top of the NUCLEO board using the Arduino or Morpho connector.