Tamura Mizuki / STM32F746_FFT

fft

Dependencies:   BSP_DISCO_F746NG SDFileSystem_Warning_Fixed

mbed_src_STM32F7/api/I2CSlave.h@3:6f7e05dd8d15, 2020-03-06 (annotated)

Committer:
aria19970520
Date:
Fri Mar 06 06:52:14 2020 +0000
Revision:
3:6f7e05dd8d15
Parent:
0:3e46577dc273 
fft

Who changed what in which revision?

UserRevisionLine numberNew contents of line
MikamiUitOpen 0:3e46577dc273 1 /* mbed Microcontroller Library
MikamiUitOpen 0:3e46577dc273 2 * Copyright (c) 2006-2013 ARM Limited
MikamiUitOpen 0:3e46577dc273 3 *
MikamiUitOpen 0:3e46577dc273 4 * Licensed under the Apache License, Version 2.0 (the "License");
MikamiUitOpen 0:3e46577dc273 5 * you may not use this file except in compliance with the License.
MikamiUitOpen 0:3e46577dc273 6 * You may obtain a copy of the License at
MikamiUitOpen 0:3e46577dc273 7 *
MikamiUitOpen 0:3e46577dc273 8 * http://www.apache.org/licenses/LICENSE-2.0
MikamiUitOpen 0:3e46577dc273 9 *
MikamiUitOpen 0:3e46577dc273 10 * Unless required by applicable law or agreed to in writing, software
MikamiUitOpen 0:3e46577dc273 11 * distributed under the License is distributed on an "AS IS" BASIS,
MikamiUitOpen 0:3e46577dc273 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
MikamiUitOpen 0:3e46577dc273 13 * See the License for the specific language governing permissions and
MikamiUitOpen 0:3e46577dc273 14 * limitations under the License.
MikamiUitOpen 0:3e46577dc273 15 */
MikamiUitOpen 0:3e46577dc273 16 #ifndef MBED_I2C_SLAVE_H
MikamiUitOpen 0:3e46577dc273 17 #define MBED_I2C_SLAVE_H
MikamiUitOpen 0:3e46577dc273 18
MikamiUitOpen 0:3e46577dc273 19 #include "platform.h"
MikamiUitOpen 0:3e46577dc273 20
MikamiUitOpen 0:3e46577dc273 21 #if DEVICE_I2CSLAVE
MikamiUitOpen 0:3e46577dc273 22
MikamiUitOpen 0:3e46577dc273 23 #include "i2c_api.h"
MikamiUitOpen 0:3e46577dc273 24
MikamiUitOpen 0:3e46577dc273 25 namespace mbed {
MikamiUitOpen 0:3e46577dc273 26
MikamiUitOpen 0:3e46577dc273 27 /** An I2C Slave, used for communicating with an I2C Master device
MikamiUitOpen 0:3e46577dc273 28 *
MikamiUitOpen 0:3e46577dc273 29 * Example:
MikamiUitOpen 0:3e46577dc273 30 * @code
MikamiUitOpen 0:3e46577dc273 31 * // Simple I2C responder
MikamiUitOpen 0:3e46577dc273 32 * #include <mbed.h>
MikamiUitOpen 0:3e46577dc273 33 *
MikamiUitOpen 0:3e46577dc273 34 * I2CSlave slave(p9, p10);
MikamiUitOpen 0:3e46577dc273 35 *
MikamiUitOpen 0:3e46577dc273 36 * int main() {
MikamiUitOpen 0:3e46577dc273 37 * char buf[10];
MikamiUitOpen 0:3e46577dc273 38 * char msg[] = "Slave!";
MikamiUitOpen 0:3e46577dc273 39 *
MikamiUitOpen 0:3e46577dc273 40 * slave.address(0xA0);
MikamiUitOpen 0:3e46577dc273 41 * while (1) {
MikamiUitOpen 0:3e46577dc273 42 * int i = slave.receive();
MikamiUitOpen 0:3e46577dc273 43 * switch (i) {
MikamiUitOpen 0:3e46577dc273 44 * case I2CSlave::ReadAddressed:
MikamiUitOpen 0:3e46577dc273 45 * slave.write(msg, strlen(msg) + 1); // Includes null char
MikamiUitOpen 0:3e46577dc273 46 * break;
MikamiUitOpen 0:3e46577dc273 47 * case I2CSlave::WriteGeneral:
MikamiUitOpen 0:3e46577dc273 48 * slave.read(buf, 10);
MikamiUitOpen 0:3e46577dc273 49 * printf("Read G: %s\n", buf);
MikamiUitOpen 0:3e46577dc273 50 * break;
MikamiUitOpen 0:3e46577dc273 51 * case I2CSlave::WriteAddressed:
MikamiUitOpen 0:3e46577dc273 52 * slave.read(buf, 10);
MikamiUitOpen 0:3e46577dc273 53 * printf("Read A: %s\n", buf);
MikamiUitOpen 0:3e46577dc273 54 * break;
MikamiUitOpen 0:3e46577dc273 55 * }
MikamiUitOpen 0:3e46577dc273 56 * for(int i = 0; i < 10; i++) buf[i] = 0; // Clear buffer
MikamiUitOpen 0:3e46577dc273 57 * }
MikamiUitOpen 0:3e46577dc273 58 * }
MikamiUitOpen 0:3e46577dc273 59 * @endcode
MikamiUitOpen 0:3e46577dc273 60 */
MikamiUitOpen 0:3e46577dc273 61 class I2CSlave {
MikamiUitOpen 0:3e46577dc273 62
MikamiUitOpen 0:3e46577dc273 63 public:
MikamiUitOpen 0:3e46577dc273 64 enum RxStatus {
MikamiUitOpen 0:3e46577dc273 65 NoData = 0,
MikamiUitOpen 0:3e46577dc273 66 ReadAddressed = 1,
MikamiUitOpen 0:3e46577dc273 67 WriteGeneral = 2,
MikamiUitOpen 0:3e46577dc273 68 WriteAddressed = 3
MikamiUitOpen 0:3e46577dc273 69 };
MikamiUitOpen 0:3e46577dc273 70
MikamiUitOpen 0:3e46577dc273 71 /** Create an I2C Slave interface, connected to the specified pins.
MikamiUitOpen 0:3e46577dc273 72 *
MikamiUitOpen 0:3e46577dc273 73 * @param sda I2C data line pin
MikamiUitOpen 0:3e46577dc273 74 * @param scl I2C clock line pin
MikamiUitOpen 0:3e46577dc273 75 */
MikamiUitOpen 0:3e46577dc273 76 I2CSlave(PinName sda, PinName scl);
MikamiUitOpen 0:3e46577dc273 77
MikamiUitOpen 0:3e46577dc273 78 /** Set the frequency of the I2C interface
MikamiUitOpen 0:3e46577dc273 79 *
MikamiUitOpen 0:3e46577dc273 80 * @param hz The bus frequency in hertz
MikamiUitOpen 0:3e46577dc273 81 */
MikamiUitOpen 0:3e46577dc273 82 void frequency(int hz);
MikamiUitOpen 0:3e46577dc273 83
MikamiUitOpen 0:3e46577dc273 84 /** Checks to see if this I2C Slave has been addressed.
MikamiUitOpen 0:3e46577dc273 85 *
MikamiUitOpen 0:3e46577dc273 86 * @returns
MikamiUitOpen 0:3e46577dc273 87 * A status indicating if the device has been addressed, and how
MikamiUitOpen 0:3e46577dc273 88 * - NoData - the slave has not been addressed
MikamiUitOpen 0:3e46577dc273 89 * - ReadAddressed - the master has requested a read from this slave
MikamiUitOpen 0:3e46577dc273 90 * - WriteAddressed - the master is writing to this slave
MikamiUitOpen 0:3e46577dc273 91 * - WriteGeneral - the master is writing to all slave
MikamiUitOpen 0:3e46577dc273 92 */
MikamiUitOpen 0:3e46577dc273 93 int receive(void);
MikamiUitOpen 0:3e46577dc273 94
MikamiUitOpen 0:3e46577dc273 95 /** Read from an I2C master.
MikamiUitOpen 0:3e46577dc273 96 *
MikamiUitOpen 0:3e46577dc273 97 * @param data pointer to the byte array to read data in to
MikamiUitOpen 0:3e46577dc273 98 * @param length maximum number of bytes to read
MikamiUitOpen 0:3e46577dc273 99 *
MikamiUitOpen 0:3e46577dc273 100 * @returns
MikamiUitOpen 0:3e46577dc273 101 * 0 on success,
MikamiUitOpen 0:3e46577dc273 102 * non-0 otherwise
MikamiUitOpen 0:3e46577dc273 103 */
MikamiUitOpen 0:3e46577dc273 104 int read(char *data, int length);
MikamiUitOpen 0:3e46577dc273 105
MikamiUitOpen 0:3e46577dc273 106 /** Read a single byte from an I2C master.
MikamiUitOpen 0:3e46577dc273 107 *
MikamiUitOpen 0:3e46577dc273 108 * @returns
MikamiUitOpen 0:3e46577dc273 109 * the byte read
MikamiUitOpen 0:3e46577dc273 110 */
MikamiUitOpen 0:3e46577dc273 111 int read(void);
MikamiUitOpen 0:3e46577dc273 112
MikamiUitOpen 0:3e46577dc273 113 /** Write to an I2C master.
MikamiUitOpen 0:3e46577dc273 114 *
MikamiUitOpen 0:3e46577dc273 115 * @param data pointer to the byte array to be transmitted
MikamiUitOpen 0:3e46577dc273 116 * @param length the number of bytes to transmite
MikamiUitOpen 0:3e46577dc273 117 *
MikamiUitOpen 0:3e46577dc273 118 * @returns
MikamiUitOpen 0:3e46577dc273 119 * 0 on success,
MikamiUitOpen 0:3e46577dc273 120 * non-0 otherwise
MikamiUitOpen 0:3e46577dc273 121 */
MikamiUitOpen 0:3e46577dc273 122 int write(const char *data, int length);
MikamiUitOpen 0:3e46577dc273 123
MikamiUitOpen 0:3e46577dc273 124 /** Write a single byte to an I2C master.
MikamiUitOpen 0:3e46577dc273 125 *
MikamiUitOpen 0:3e46577dc273 126 * @data the byte to write
MikamiUitOpen 0:3e46577dc273 127 *
MikamiUitOpen 0:3e46577dc273 128 * @returns
MikamiUitOpen 0:3e46577dc273 129 * '1' if an ACK was received,
MikamiUitOpen 0:3e46577dc273 130 * '0' otherwise
MikamiUitOpen 0:3e46577dc273 131 */
MikamiUitOpen 0:3e46577dc273 132 int write(int data);
MikamiUitOpen 0:3e46577dc273 133
MikamiUitOpen 0:3e46577dc273 134 /** Sets the I2C slave address.
MikamiUitOpen 0:3e46577dc273 135 *
MikamiUitOpen 0:3e46577dc273 136 * @param address The address to set for the slave (ignoring the least
MikamiUitOpen 0:3e46577dc273 137 * signifcant bit). If set to 0, the slave will only respond to the
MikamiUitOpen 0:3e46577dc273 138 * general call address.
MikamiUitOpen 0:3e46577dc273 139 */
MikamiUitOpen 0:3e46577dc273 140 void address(int address);
MikamiUitOpen 0:3e46577dc273 141
MikamiUitOpen 0:3e46577dc273 142 /** Reset the I2C slave back into the known ready receiving state.
MikamiUitOpen 0:3e46577dc273 143 */
MikamiUitOpen 0:3e46577dc273 144 void stop(void);
MikamiUitOpen 0:3e46577dc273 145
MikamiUitOpen 0:3e46577dc273 146 protected:
MikamiUitOpen 0:3e46577dc273 147 i2c_t _i2c;
MikamiUitOpen 0:3e46577dc273 148 };
MikamiUitOpen 0:3e46577dc273 149
MikamiUitOpen 0:3e46577dc273 150 } // namespace mbed
MikamiUitOpen 0:3e46577dc273 151
MikamiUitOpen 0:3e46577dc273 152 #endif
MikamiUitOpen 0:3e46577dc273 153
MikamiUitOpen 0:3e46577dc273 154 #endif