Tamura Mizuki / STM32F746_FFT

fft

Dependencies:   BSP_DISCO_F746NG SDFileSystem_Warning_Fixed

mbed_src_STM32F7/hal/serial_api.h@0:3e46577dc273, 2016-10-09 (annotated)

Committer:
MikamiUitOpen
Date:
Sun Oct 09 10:11:14 2016 +0000
Revision:
0:3e46577dc273
1

Who changed what in which revision?

UserRevisionLine numberNew contents of line
MikamiUitOpen 0:3e46577dc273 1 /* mbed Microcontroller Library
MikamiUitOpen 0:3e46577dc273 2 * Copyright (c) 2006-2013 ARM Limited
MikamiUitOpen 0:3e46577dc273 3 *
MikamiUitOpen 0:3e46577dc273 4 * Licensed under the Apache License, Version 2.0 (the "License");
MikamiUitOpen 0:3e46577dc273 5 * you may not use this file except in compliance with the License.
MikamiUitOpen 0:3e46577dc273 6 * You may obtain a copy of the License at
MikamiUitOpen 0:3e46577dc273 7 *
MikamiUitOpen 0:3e46577dc273 8 * http://www.apache.org/licenses/LICENSE-2.0
MikamiUitOpen 0:3e46577dc273 9 *
MikamiUitOpen 0:3e46577dc273 10 * Unless required by applicable law or agreed to in writing, software
MikamiUitOpen 0:3e46577dc273 11 * distributed under the License is distributed on an "AS IS" BASIS,
MikamiUitOpen 0:3e46577dc273 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
MikamiUitOpen 0:3e46577dc273 13 * See the License for the specific language governing permissions and
MikamiUitOpen 0:3e46577dc273 14 * limitations under the License.
MikamiUitOpen 0:3e46577dc273 15 */
MikamiUitOpen 0:3e46577dc273 16 #ifndef MBED_SERIAL_API_H
MikamiUitOpen 0:3e46577dc273 17 #define MBED_SERIAL_API_H
MikamiUitOpen 0:3e46577dc273 18
MikamiUitOpen 0:3e46577dc273 19 #include "device.h"
MikamiUitOpen 0:3e46577dc273 20 #include "buffer.h"
MikamiUitOpen 0:3e46577dc273 21 #include "dma_api.h"
MikamiUitOpen 0:3e46577dc273 22
MikamiUitOpen 0:3e46577dc273 23 #if DEVICE_SERIAL
MikamiUitOpen 0:3e46577dc273 24
MikamiUitOpen 0:3e46577dc273 25 #define SERIAL_EVENT_TX_SHIFT (2)
MikamiUitOpen 0:3e46577dc273 26 #define SERIAL_EVENT_RX_SHIFT (8)
MikamiUitOpen 0:3e46577dc273 27
MikamiUitOpen 0:3e46577dc273 28 #define SERIAL_EVENT_TX_MASK (0x00FC)
MikamiUitOpen 0:3e46577dc273 29 #define SERIAL_EVENT_RX_MASK (0x3F00)
MikamiUitOpen 0:3e46577dc273 30
MikamiUitOpen 0:3e46577dc273 31 #define SERIAL_EVENT_ERROR (1 << 1)
MikamiUitOpen 0:3e46577dc273 32
MikamiUitOpen 0:3e46577dc273 33 /**
MikamiUitOpen 0:3e46577dc273 34 * @defgroup SerialTXEvents Serial TX Events Macros
MikamiUitOpen 0:3e46577dc273 35 *
MikamiUitOpen 0:3e46577dc273 36 * @{
MikamiUitOpen 0:3e46577dc273 37 */
MikamiUitOpen 0:3e46577dc273 38 #define SERIAL_EVENT_TX_COMPLETE (1 << (SERIAL_EVENT_TX_SHIFT + 0))
MikamiUitOpen 0:3e46577dc273 39 #define SERIAL_EVENT_TX_ALL (SERIAL_EVENT_TX_COMPLETE)
MikamiUitOpen 0:3e46577dc273 40 /**@}*/
MikamiUitOpen 0:3e46577dc273 41
MikamiUitOpen 0:3e46577dc273 42 /**
MikamiUitOpen 0:3e46577dc273 43 * @defgroup SerialRXEvents Serial RX Events Macros
MikamiUitOpen 0:3e46577dc273 44 *
MikamiUitOpen 0:3e46577dc273 45 * @{
MikamiUitOpen 0:3e46577dc273 46 */
MikamiUitOpen 0:3e46577dc273 47 #define SERIAL_EVENT_RX_COMPLETE (1 << (SERIAL_EVENT_RX_SHIFT + 0))
MikamiUitOpen 0:3e46577dc273 48 #define SERIAL_EVENT_RX_OVERRUN_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 1))
MikamiUitOpen 0:3e46577dc273 49 #define SERIAL_EVENT_RX_FRAMING_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 2))
MikamiUitOpen 0:3e46577dc273 50 #define SERIAL_EVENT_RX_PARITY_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 3))
MikamiUitOpen 0:3e46577dc273 51 #define SERIAL_EVENT_RX_OVERFLOW (1 << (SERIAL_EVENT_RX_SHIFT + 4))
MikamiUitOpen 0:3e46577dc273 52 #define SERIAL_EVENT_RX_CHARACTER_MATCH (1 << (SERIAL_EVENT_RX_SHIFT + 5))
MikamiUitOpen 0:3e46577dc273 53 #define SERIAL_EVENT_RX_ALL (SERIAL_EVENT_RX_OVERFLOW | SERIAL_EVENT_RX_PARITY_ERROR | \
MikamiUitOpen 0:3e46577dc273 54 SERIAL_EVENT_RX_FRAMING_ERROR | SERIAL_EVENT_RX_OVERRUN_ERROR | \
MikamiUitOpen 0:3e46577dc273 55 SERIAL_EVENT_RX_COMPLETE | SERIAL_EVENT_RX_CHARACTER_MATCH)
MikamiUitOpen 0:3e46577dc273 56 /**@}*/
MikamiUitOpen 0:3e46577dc273 57
MikamiUitOpen 0:3e46577dc273 58 #define SERIAL_RESERVED_CHAR_MATCH (255)
MikamiUitOpen 0:3e46577dc273 59
MikamiUitOpen 0:3e46577dc273 60 typedef enum {
MikamiUitOpen 0:3e46577dc273 61 ParityNone = 0,
MikamiUitOpen 0:3e46577dc273 62 ParityOdd = 1,
MikamiUitOpen 0:3e46577dc273 63 ParityEven = 2,
MikamiUitOpen 0:3e46577dc273 64 ParityForced1 = 3,
MikamiUitOpen 0:3e46577dc273 65 ParityForced0 = 4
MikamiUitOpen 0:3e46577dc273 66 } SerialParity;
MikamiUitOpen 0:3e46577dc273 67
MikamiUitOpen 0:3e46577dc273 68 typedef enum {
MikamiUitOpen 0:3e46577dc273 69 RxIrq,
MikamiUitOpen 0:3e46577dc273 70 TxIrq
MikamiUitOpen 0:3e46577dc273 71 } SerialIrq;
MikamiUitOpen 0:3e46577dc273 72
MikamiUitOpen 0:3e46577dc273 73 typedef enum {
MikamiUitOpen 0:3e46577dc273 74 FlowControlNone,
MikamiUitOpen 0:3e46577dc273 75 FlowControlRTS,
MikamiUitOpen 0:3e46577dc273 76 FlowControlCTS,
MikamiUitOpen 0:3e46577dc273 77 FlowControlRTSCTS
MikamiUitOpen 0:3e46577dc273 78 } FlowControl;
MikamiUitOpen 0:3e46577dc273 79
MikamiUitOpen 0:3e46577dc273 80 typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event);
MikamiUitOpen 0:3e46577dc273 81
MikamiUitOpen 0:3e46577dc273 82 #if DEVICE_SERIAL_ASYNCH
MikamiUitOpen 0:3e46577dc273 83 /** Asynch serial hal structure
MikamiUitOpen 0:3e46577dc273 84 */
MikamiUitOpen 0:3e46577dc273 85 typedef struct {
MikamiUitOpen 0:3e46577dc273 86 struct serial_s serial; /**< Target specific serial structure */
MikamiUitOpen 0:3e46577dc273 87 struct buffer_s tx_buff; /**< Tx buffer */
MikamiUitOpen 0:3e46577dc273 88 struct buffer_s rx_buff; /**< Rx buffer */
MikamiUitOpen 0:3e46577dc273 89 uint8_t char_match; /**< Character to be matched */
MikamiUitOpen 0:3e46577dc273 90 uint8_t char_found; /**< State of the matched character */
MikamiUitOpen 0:3e46577dc273 91 } serial_t;
MikamiUitOpen 0:3e46577dc273 92
MikamiUitOpen 0:3e46577dc273 93 #else
MikamiUitOpen 0:3e46577dc273 94 /** Non-asynch serial hal structure
MikamiUitOpen 0:3e46577dc273 95 */
MikamiUitOpen 0:3e46577dc273 96 typedef struct serial_s serial_t;
MikamiUitOpen 0:3e46577dc273 97
MikamiUitOpen 0:3e46577dc273 98 #endif
MikamiUitOpen 0:3e46577dc273 99
MikamiUitOpen 0:3e46577dc273 100 #ifdef __cplusplus
MikamiUitOpen 0:3e46577dc273 101 extern "C" {
MikamiUitOpen 0:3e46577dc273 102 #endif
MikamiUitOpen 0:3e46577dc273 103
MikamiUitOpen 0:3e46577dc273 104 /**
MikamiUitOpen 0:3e46577dc273 105 * \defgroup GeneralSerial Serial Configuration Functions
MikamiUitOpen 0:3e46577dc273 106 * @{
MikamiUitOpen 0:3e46577dc273 107 */
MikamiUitOpen 0:3e46577dc273 108
MikamiUitOpen 0:3e46577dc273 109 /** Initialize the serial peripheral. It sets the default parameters for serial
MikamiUitOpen 0:3e46577dc273 110 * peripheral, and configure its specifieds pins.
MikamiUitOpen 0:3e46577dc273 111 *
MikamiUitOpen 0:3e46577dc273 112 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 113 * @param tx The TX pin
MikamiUitOpen 0:3e46577dc273 114 * @param rx The RX pin
MikamiUitOpen 0:3e46577dc273 115 */
MikamiUitOpen 0:3e46577dc273 116 void serial_init(serial_t *obj, PinName tx, PinName rx);
MikamiUitOpen 0:3e46577dc273 117
MikamiUitOpen 0:3e46577dc273 118 /** Release the serial peripheral, not currently invoked. It requires further
MikamiUitOpen 0:3e46577dc273 119 * resource management.
MikamiUitOpen 0:3e46577dc273 120 *
MikamiUitOpen 0:3e46577dc273 121 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 122 */
MikamiUitOpen 0:3e46577dc273 123 void serial_free(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 124
MikamiUitOpen 0:3e46577dc273 125 /** Configure the baud rate
MikamiUitOpen 0:3e46577dc273 126 *
MikamiUitOpen 0:3e46577dc273 127 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 128 * @param baudrate The baud rate to be configured
MikamiUitOpen 0:3e46577dc273 129 */
MikamiUitOpen 0:3e46577dc273 130 void serial_baud(serial_t *obj, int baudrate);
MikamiUitOpen 0:3e46577dc273 131
MikamiUitOpen 0:3e46577dc273 132 /** Configure the format. Set the number of bits, parity and the number of stop bits
MikamiUitOpen 0:3e46577dc273 133 *
MikamiUitOpen 0:3e46577dc273 134 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 135 * @param data_bits The number of data bits
MikamiUitOpen 0:3e46577dc273 136 * @param parity The parity
MikamiUitOpen 0:3e46577dc273 137 * @param stop_bits The number of stop bits
MikamiUitOpen 0:3e46577dc273 138 */
MikamiUitOpen 0:3e46577dc273 139 void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits);
MikamiUitOpen 0:3e46577dc273 140
MikamiUitOpen 0:3e46577dc273 141 /** The serial interrupt handler registration.
MikamiUitOpen 0:3e46577dc273 142 *
MikamiUitOpen 0:3e46577dc273 143 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 144 * @param handler The interrupt handler which will be invoked when interrupt fires.
MikamiUitOpen 0:3e46577dc273 145 * @param id The SerialBase object
MikamiUitOpen 0:3e46577dc273 146 */
MikamiUitOpen 0:3e46577dc273 147 void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id);
MikamiUitOpen 0:3e46577dc273 148
MikamiUitOpen 0:3e46577dc273 149 /** Configure serial interrupt. This function is used for word-approach
MikamiUitOpen 0:3e46577dc273 150 *
MikamiUitOpen 0:3e46577dc273 151 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 152 * @param irq The serial IRQ type (RX or TX)
MikamiUitOpen 0:3e46577dc273 153 * @param enable Set to non-zero to enable events, or zero to disable them
MikamiUitOpen 0:3e46577dc273 154 */
MikamiUitOpen 0:3e46577dc273 155 void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable);
MikamiUitOpen 0:3e46577dc273 156
MikamiUitOpen 0:3e46577dc273 157 /** Get character. This is a blocking call, waiting for a character
MikamiUitOpen 0:3e46577dc273 158 *
MikamiUitOpen 0:3e46577dc273 159 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 160 */
MikamiUitOpen 0:3e46577dc273 161 int serial_getc(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 162
MikamiUitOpen 0:3e46577dc273 163 /** Put a character. This is a blocking call, waiting for a peripheral to be available
MikamiUitOpen 0:3e46577dc273 164 * for writing
MikamiUitOpen 0:3e46577dc273 165 *
MikamiUitOpen 0:3e46577dc273 166 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 167 * @param c The character to be sent
MikamiUitOpen 0:3e46577dc273 168 */
MikamiUitOpen 0:3e46577dc273 169 void serial_putc(serial_t *obj, int c);
MikamiUitOpen 0:3e46577dc273 170
MikamiUitOpen 0:3e46577dc273 171 /** Check if the serial peripheral is readable
MikamiUitOpen 0:3e46577dc273 172 *
MikamiUitOpen 0:3e46577dc273 173 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 174 * @return Non-zero value if a character can be read, 0 if nothing to read.
MikamiUitOpen 0:3e46577dc273 175 */
MikamiUitOpen 0:3e46577dc273 176 int serial_readable(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 177
MikamiUitOpen 0:3e46577dc273 178 /** Check if the serial peripheral is writable
MikamiUitOpen 0:3e46577dc273 179 *
MikamiUitOpen 0:3e46577dc273 180 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 181 * @return Non-zero value if a character can be written, 0 otherwise.
MikamiUitOpen 0:3e46577dc273 182 */
MikamiUitOpen 0:3e46577dc273 183 int serial_writable(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 184
MikamiUitOpen 0:3e46577dc273 185 /** Clear the serial peripheral
MikamiUitOpen 0:3e46577dc273 186 *
MikamiUitOpen 0:3e46577dc273 187 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 188 */
MikamiUitOpen 0:3e46577dc273 189 void serial_clear(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 190
MikamiUitOpen 0:3e46577dc273 191 /** Set the break
MikamiUitOpen 0:3e46577dc273 192 *
MikamiUitOpen 0:3e46577dc273 193 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 194 */
MikamiUitOpen 0:3e46577dc273 195 void serial_break_set(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 196
MikamiUitOpen 0:3e46577dc273 197 /** Clear the break
MikamiUitOpen 0:3e46577dc273 198 *
MikamiUitOpen 0:3e46577dc273 199 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 200 */
MikamiUitOpen 0:3e46577dc273 201 void serial_break_clear(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 202
MikamiUitOpen 0:3e46577dc273 203 /** Configure the TX pin for UART function.
MikamiUitOpen 0:3e46577dc273 204 *
MikamiUitOpen 0:3e46577dc273 205 * @param tx The pin used for TX
MikamiUitOpen 0:3e46577dc273 206 */
MikamiUitOpen 0:3e46577dc273 207 void serial_pinout_tx(PinName tx);
MikamiUitOpen 0:3e46577dc273 208
MikamiUitOpen 0:3e46577dc273 209 /** Configure the serial for the flow control. It sets flow control in the hardware
MikamiUitOpen 0:3e46577dc273 210 * if a serial peripheral supports it, otherwise software emulation is used.
MikamiUitOpen 0:3e46577dc273 211 *
MikamiUitOpen 0:3e46577dc273 212 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 213 * @param type The type of the flow control. Look at the available FlowControl types.
MikamiUitOpen 0:3e46577dc273 214 * @param rxflow The tx pin
MikamiUitOpen 0:3e46577dc273 215 * @param txflow The rx pin
MikamiUitOpen 0:3e46577dc273 216 */
MikamiUitOpen 0:3e46577dc273 217 void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow);
MikamiUitOpen 0:3e46577dc273 218
MikamiUitOpen 0:3e46577dc273 219 #if DEVICE_SERIAL_ASYNCH
MikamiUitOpen 0:3e46577dc273 220
MikamiUitOpen 0:3e46577dc273 221 /**@}*/
MikamiUitOpen 0:3e46577dc273 222
MikamiUitOpen 0:3e46577dc273 223 /**
MikamiUitOpen 0:3e46577dc273 224 * \defgroup AsynchSerial Asynchronous Serial Hardware Abstraction Layer
MikamiUitOpen 0:3e46577dc273 225 * @{
MikamiUitOpen 0:3e46577dc273 226 */
MikamiUitOpen 0:3e46577dc273 227
MikamiUitOpen 0:3e46577dc273 228 /** Begin asynchronous TX transfer. The used buffer is specified in the serial object,
MikamiUitOpen 0:3e46577dc273 229 * tx_buff
MikamiUitOpen 0:3e46577dc273 230 *
MikamiUitOpen 0:3e46577dc273 231 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 232 * @param tx The buffer for sending
MikamiUitOpen 0:3e46577dc273 233 * @param tx_length The number of words to transmit
MikamiUitOpen 0:3e46577dc273 234 * @param tx_width The bit width of buffer word
MikamiUitOpen 0:3e46577dc273 235 * @param handler The serial handler
MikamiUitOpen 0:3e46577dc273 236 * @param event The logical OR of events to be registered
MikamiUitOpen 0:3e46577dc273 237 * @param hint A suggestion for how to use DMA with this transfer
MikamiUitOpen 0:3e46577dc273 238 * @return Returns number of data transfered, or 0 otherwise
MikamiUitOpen 0:3e46577dc273 239 */
MikamiUitOpen 0:3e46577dc273 240 int serial_tx_asynch(serial_t *obj, const void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint);
MikamiUitOpen 0:3e46577dc273 241
MikamiUitOpen 0:3e46577dc273 242 /** Begin asynchronous RX transfer (enable interrupt for data collecting)
MikamiUitOpen 0:3e46577dc273 243 * The used buffer is specified in the serial object - rx_buff
MikamiUitOpen 0:3e46577dc273 244 *
MikamiUitOpen 0:3e46577dc273 245 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 246 * @param rx The buffer for sending
MikamiUitOpen 0:3e46577dc273 247 * @param rx_length The number of words to transmit
MikamiUitOpen 0:3e46577dc273 248 * @param rx_width The bit width of buffer word
MikamiUitOpen 0:3e46577dc273 249 * @param handler The serial handler
MikamiUitOpen 0:3e46577dc273 250 * @param event The logical OR of events to be registered
MikamiUitOpen 0:3e46577dc273 251 * @param handler The serial handler
MikamiUitOpen 0:3e46577dc273 252 * @param char_match A character in range 0-254 to be matched
MikamiUitOpen 0:3e46577dc273 253 * @param hint A suggestion for how to use DMA with this transfer
MikamiUitOpen 0:3e46577dc273 254 */
MikamiUitOpen 0:3e46577dc273 255 void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint);
MikamiUitOpen 0:3e46577dc273 256
MikamiUitOpen 0:3e46577dc273 257 /** Attempts to determine if the serial peripheral is already in use for TX
MikamiUitOpen 0:3e46577dc273 258 *
MikamiUitOpen 0:3e46577dc273 259 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 260 * @return Non-zero if the RX transaction is ongoing, 0 otherwise
MikamiUitOpen 0:3e46577dc273 261 */
MikamiUitOpen 0:3e46577dc273 262 uint8_t serial_tx_active(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 263
MikamiUitOpen 0:3e46577dc273 264 /** Attempts to determine if the serial peripheral is already in use for RX
MikamiUitOpen 0:3e46577dc273 265 *
MikamiUitOpen 0:3e46577dc273 266 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 267 * @return Non-zero if the RX transaction is ongoing, 0 otherwise
MikamiUitOpen 0:3e46577dc273 268 */
MikamiUitOpen 0:3e46577dc273 269 uint8_t serial_rx_active(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 270
MikamiUitOpen 0:3e46577dc273 271 /** The asynchronous TX and RX handler.
MikamiUitOpen 0:3e46577dc273 272 *
MikamiUitOpen 0:3e46577dc273 273 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 274 * @return Returns event flags if a RX transfer termination condition was met or 0 otherwise
MikamiUitOpen 0:3e46577dc273 275 */
MikamiUitOpen 0:3e46577dc273 276 int serial_irq_handler_asynch(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 277
MikamiUitOpen 0:3e46577dc273 278 /** Abort the ongoing TX transaction. It disables the enabled interupt for TX and
MikamiUitOpen 0:3e46577dc273 279 * flush TX hardware buffer if TX FIFO is used
MikamiUitOpen 0:3e46577dc273 280 *
MikamiUitOpen 0:3e46577dc273 281 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 282 */
MikamiUitOpen 0:3e46577dc273 283 void serial_tx_abort_asynch(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 284
MikamiUitOpen 0:3e46577dc273 285 /** Abort the ongoing RX transaction It disables the enabled interrupt for RX and
MikamiUitOpen 0:3e46577dc273 286 * flush RX hardware buffer if RX FIFO is used
MikamiUitOpen 0:3e46577dc273 287 *
MikamiUitOpen 0:3e46577dc273 288 * @param obj The serial object
MikamiUitOpen 0:3e46577dc273 289 */
MikamiUitOpen 0:3e46577dc273 290 void serial_rx_abort_asynch(serial_t *obj);
MikamiUitOpen 0:3e46577dc273 291
MikamiUitOpen 0:3e46577dc273 292 /**@}*/
MikamiUitOpen 0:3e46577dc273 293
MikamiUitOpen 0:3e46577dc273 294 #endif
MikamiUitOpen 0:3e46577dc273 295
MikamiUitOpen 0:3e46577dc273 296 #ifdef __cplusplus
MikamiUitOpen 0:3e46577dc273 297 }
MikamiUitOpen 0:3e46577dc273 298 #endif
MikamiUitOpen 0:3e46577dc273 299
MikamiUitOpen 0:3e46577dc273 300 #endif
MikamiUitOpen 0:3e46577dc273 301
MikamiUitOpen 0:3e46577dc273 302 #endif