ddwdwdrr
Fork of MPU6050 by
Diff: MPU6050.cpp
- Revision:
- 0:662207e34fba
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MPU6050.cpp Fri Jan 11 00:54:28 2013 +0000 @@ -0,0 +1,3432 @@ +//ported from arduino library: https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/MPU6050 +//written by szymon gaertig (email: szymon@gaertig.com.pl) +// +//Changelog: +//2013-01-08 - first beta release + +// I2Cdev library collection - MPU6050 I2C device class +// Based on InvenSense MPU-6050 register map document rev. 2.0, 5/19/2011 (RM-MPU-6000A-00) +// 8/24/2011 by Jeff Rowberg <jeff@rowberg.net> +// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib +// +// Changelog: +// ... - ongoing debug release + +// NOTE: THIS IS ONLY A PARIAL RELEASE. THIS DEVICE CLASS IS CURRENTLY UNDERGOING ACTIVE +// DEVELOPMENT AND IS STILL MISSING SOME IMPORTANT FEATURES. PLEASE KEEP THIS IN MIND IF +// YOU DECIDE TO USE THIS PARTICULAR CODE FOR ANYTHING. + +/* ============================================ +I2Cdev device library code is placed under the MIT license +Copyright (c) 2012 Jeff Rowberg + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. +=============================================== +*/ + +#include "MPU6050.h" + +#define useDebugSerial + +//instead of using pgmspace.h +typedef const unsigned char prog_uchar; +#define pgm_read_byte_near(x) (*(prog_uchar*)x) +#define pgm_read_byte(x) (*(prog_uchar*)x) + +/** Default constructor, uses default I2C address. + * @see MPU6050_DEFAULT_ADDRESS + */ +MPU6050::MPU6050() : debugSerial(USBTX, USBRX) +{ + devAddr = MPU6050_DEFAULT_ADDRESS; +} + +/** Specific address constructor. + * @param address I2C address + * @see MPU6050_DEFAULT_ADDRESS + * @see MPU6050_ADDRESS_AD0_LOW + * @see MPU6050_ADDRESS_AD0_HIGH + */ +MPU6050::MPU6050(uint8_t address) : debugSerial(USBTX, USBRX) +{ + devAddr = address; +} + +/** Power on and prepare for general usage. + * This will activate the device and take it out of sleep mode (which must be done + * after start-up). This function also sets both the accelerometer and the gyroscope + * to their most sensitive settings, namely +/- 2g and +/- 250 degrees/sec, and sets + * the clock source to use the X Gyro for reference, which is slightly better than + * the default internal clock source. + */ +void MPU6050::initialize() +{ + +#ifdef useDebugSerial + debugSerial.printf("MPU6050::initialize start\n"); +#endif + + setClockSource(MPU6050_CLOCK_PLL_XGYRO); + setFullScaleGyroRange(MPU6050_GYRO_FS_250); + setFullScaleAccelRange(MPU6050_ACCEL_FS_2); + setSleepEnabled(false); // thanks to Jack Elston for pointing this one out! + +#ifdef useDebugSerial + debugSerial.printf("MPU6050::initialize end\n"); +#endif +} + +/** Verify the I2C connection. + * Make sure the device is connected and responds as expected. + * @return True if connection is valid, false otherwise + */ +bool MPU6050::testConnection() +{ +#ifdef useDebugSerial + debugSerial.printf("MPU6050::testConnection start\n"); +#endif + uint8_t deviceId = getDeviceID(); +#ifdef useDebugSerial + debugSerial.printf("DeviceId = %d\n",deviceId); +#endif + return deviceId == 0x34; +} + +// AUX_VDDIO register (InvenSense demo code calls this RA_*G_OFFS_TC) + +/** Get the auxiliary I2C supply voltage level. + * When set to 1, the auxiliary I2C bus high logic level is VDD. When cleared to + * 0, the auxiliary I2C bus high logic level is VLOGIC. This does not apply to + * the MPU-6000, which does not have a VLOGIC pin. + * @return I2C supply voltage level (0=VLOGIC, 1=VDD) + */ +uint8_t MPU6050::getAuxVDDIOLevel() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_YG_OFFS_TC, MPU6050_TC_PWR_MODE_BIT, buffer); + return buffer[0]; +} +/** Set the auxiliary I2C supply voltage level. + * When set to 1, the auxiliary I2C bus high logic level is VDD. When cleared to + * 0, the auxiliary I2C bus high logic level is VLOGIC. This does not apply to + * the MPU-6000, which does not have a VLOGIC pin. + * @param level I2C supply voltage level (0=VLOGIC, 1=VDD) + */ +void MPU6050::setAuxVDDIOLevel(uint8_t level) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_YG_OFFS_TC, MPU6050_TC_PWR_MODE_BIT, level); +} + +// SMPLRT_DIV register + +/** Get gyroscope output rate divider. + * The sensor register output, FIFO output, DMP sampling, Motion detection, Zero + * Motion detection, and Free Fall detection are all based on the Sample Rate. + * The Sample Rate is generated by dividing the gyroscope output rate by + * SMPLRT_DIV: + * + * Sample Rate = Gyroscope Output Rate / (1 + SMPLRT_DIV) + * + * where Gyroscope Output Rate = 8kHz when the DLPF is disabled (DLPF_CFG = 0 or + * 7), and 1kHz when the DLPF is enabled (see Register 26). + * + * Note: The accelerometer output rate is 1kHz. This means that for a Sample + * Rate greater than 1kHz, the same accelerometer sample may be output to the + * FIFO, DMP, and sensor registers more than once. + * + * For a diagram of the gyroscope and accelerometer signal paths, see Section 8 + * of the MPU-6000/MPU-6050 Product Specification document. + * + * @return Current sample rate + * @see MPU6050_RA_SMPLRT_DIV + */ +uint8_t MPU6050::getRate() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_SMPLRT_DIV, buffer); + return buffer[0]; +} +/** Set gyroscope sample rate divider. + * @param rate New sample rate divider + * @see getRate() + * @see MPU6050_RA_SMPLRT_DIV + */ +void MPU6050::setRate(uint8_t rate) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_SMPLRT_DIV, rate); +} + +// CONFIG register + +/** Get external FSYNC configuration. + * Configures the external Frame Synchronization (FSYNC) pin sampling. An + * external signal connected to the FSYNC pin can be sampled by configuring + * EXT_SYNC_SET. Signal changes to the FSYNC pin are latched so that short + * strobes may be captured. The latched FSYNC signal will be sampled at the + * Sampling Rate, as defined in register 25. After sampling, the latch will + * reset to the current FSYNC signal state. + * + * The sampled value will be reported in place of the least significant bit in + * a sensor data register determined by the value of EXT_SYNC_SET according to + * the following table. + * + * <pre> + * EXT_SYNC_SET | FSYNC Bit Location + * -------------+------------------- + * 0 | Input disabled + * 1 | TEMP_OUT_L[0] + * 2 | GYRO_XOUT_L[0] + * 3 | GYRO_YOUT_L[0] + * 4 | GYRO_ZOUT_L[0] + * 5 | ACCEL_XOUT_L[0] + * 6 | ACCEL_YOUT_L[0] + * 7 | ACCEL_ZOUT_L[0] + * </pre> + * + * @return FSYNC configuration value + */ +uint8_t MPU6050::getExternalFrameSync() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_CONFIG, MPU6050_CFG_EXT_SYNC_SET_BIT, MPU6050_CFG_EXT_SYNC_SET_LENGTH, buffer); + return buffer[0]; +} +/** Set external FSYNC configuration. + * @see getExternalFrameSync() + * @see MPU6050_RA_CONFIG + * @param sync New FSYNC configuration value + */ +void MPU6050::setExternalFrameSync(uint8_t sync) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_CONFIG, MPU6050_CFG_EXT_SYNC_SET_BIT, MPU6050_CFG_EXT_SYNC_SET_LENGTH, sync); +} +/** Get digital low-pass filter configuration. + * The DLPF_CFG parameter sets the digital low pass filter configuration. It + * also determines the internal sampling rate used by the device as shown in + * the table below. + * + * Note: The accelerometer output rate is 1kHz. This means that for a Sample + * Rate greater than 1kHz, the same accelerometer sample may be output to the + * FIFO, DMP, and sensor registers more than once. + * + * <pre> + * | ACCELEROMETER | GYROSCOPE + * DLPF_CFG | Bandwidth | Delay | Bandwidth | Delay | Sample Rate + * ---------+-----------+--------+-----------+--------+------------- + * 0 | 260Hz | 0ms | 256Hz | 0.98ms | 8kHz + * 1 | 184Hz | 2.0ms | 188Hz | 1.9ms | 1kHz + * 2 | 94Hz | 3.0ms | 98Hz | 2.8ms | 1kHz + * 3 | 44Hz | 4.9ms | 42Hz | 4.8ms | 1kHz + * 4 | 21Hz | 8.5ms | 20Hz | 8.3ms | 1kHz + * 5 | 10Hz | 13.8ms | 10Hz | 13.4ms | 1kHz + * 6 | 5Hz | 19.0ms | 5Hz | 18.6ms | 1kHz + * 7 | -- Reserved -- | -- Reserved -- | Reserved + * </pre> + * + * @return DLFP configuration + * @see MPU6050_RA_CONFIG + * @see MPU6050_CFG_DLPF_CFG_BIT + * @see MPU6050_CFG_DLPF_CFG_LENGTH + */ +uint8_t MPU6050::getDLPFMode() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_CONFIG, MPU6050_CFG_DLPF_CFG_BIT, MPU6050_CFG_DLPF_CFG_LENGTH, buffer); + return buffer[0]; +} +/** Set digital low-pass filter configuration. + * @param mode New DLFP configuration setting + * @see getDLPFBandwidth() + * @see MPU6050_DLPF_BW_256 + * @see MPU6050_RA_CONFIG + * @see MPU6050_CFG_DLPF_CFG_BIT + * @see MPU6050_CFG_DLPF_CFG_LENGTH + */ +void MPU6050::setDLPFMode(uint8_t mode) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_CONFIG, MPU6050_CFG_DLPF_CFG_BIT, MPU6050_CFG_DLPF_CFG_LENGTH, mode); +} + +// GYRO_CONFIG register + +/** Get full-scale gyroscope range. + * The FS_SEL parameter allows setting the full-scale range of the gyro sensors, + * as described in the table below. + * + * <pre> + * 0 = +/- 250 degrees/sec + * 1 = +/- 500 degrees/sec + * 2 = +/- 1000 degrees/sec + * 3 = +/- 2000 degrees/sec + * </pre> + * + * @return Current full-scale gyroscope range setting + * @see MPU6050_GYRO_FS_250 + * @see MPU6050_RA_GYRO_CONFIG + * @see MPU6050_GCONFIG_FS_SEL_BIT + * @see MPU6050_GCONFIG_FS_SEL_LENGTH + */ +uint8_t MPU6050::getFullScaleGyroRange() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_GYRO_CONFIG, MPU6050_GCONFIG_FS_SEL_BIT, MPU6050_GCONFIG_FS_SEL_LENGTH, buffer); + return buffer[0]; +} +/** Set full-scale gyroscope range. + * @param range New full-scale gyroscope range value + * @see getFullScaleRange() + * @see MPU6050_GYRO_FS_250 + * @see MPU6050_RA_GYRO_CONFIG + * @see MPU6050_GCONFIG_FS_SEL_BIT + * @see MPU6050_GCONFIG_FS_SEL_LENGTH + */ +void MPU6050::setFullScaleGyroRange(uint8_t range) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_GYRO_CONFIG, MPU6050_GCONFIG_FS_SEL_BIT, MPU6050_GCONFIG_FS_SEL_LENGTH, range); +} + +// ACCEL_CONFIG register + +/** Get self-test enabled setting for accelerometer X axis. + * @return Self-test enabled value + * @see MPU6050_RA_ACCEL_CONFIG + */ +bool MPU6050::getAccelXSelfTest() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_XA_ST_BIT, buffer); + return buffer[0]; +} +/** Get self-test enabled setting for accelerometer X axis. + * @param enabled Self-test enabled value + * @see MPU6050_RA_ACCEL_CONFIG + */ +void MPU6050::setAccelXSelfTest(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_XA_ST_BIT, enabled); +} +/** Get self-test enabled value for accelerometer Y axis. + * @return Self-test enabled value + * @see MPU6050_RA_ACCEL_CONFIG + */ +bool MPU6050::getAccelYSelfTest() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_YA_ST_BIT, buffer); + return buffer[0]; +} +/** Get self-test enabled value for accelerometer Y axis. + * @param enabled Self-test enabled value + * @see MPU6050_RA_ACCEL_CONFIG + */ +void MPU6050::setAccelYSelfTest(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_YA_ST_BIT, enabled); +} +/** Get self-test enabled value for accelerometer Z axis. + * @return Self-test enabled value + * @see MPU6050_RA_ACCEL_CONFIG + */ +bool MPU6050::getAccelZSelfTest() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_ZA_ST_BIT, buffer); + return buffer[0]; +} +/** Set self-test enabled value for accelerometer Z axis. + * @param enabled Self-test enabled value + * @see MPU6050_RA_ACCEL_CONFIG + */ +void MPU6050::setAccelZSelfTest(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_ZA_ST_BIT, enabled); +} +/** Get full-scale accelerometer range. + * The FS_SEL parameter allows setting the full-scale range of the accelerometer + * sensors, as described in the table below. + * + * <pre> + * 0 = +/- 2g + * 1 = +/- 4g + * 2 = +/- 8g + * 3 = +/- 16g + * </pre> + * + * @return Current full-scale accelerometer range setting + * @see MPU6050_ACCEL_FS_2 + * @see MPU6050_RA_ACCEL_CONFIG + * @see MPU6050_ACONFIG_AFS_SEL_BIT + * @see MPU6050_ACONFIG_AFS_SEL_LENGTH + */ +uint8_t MPU6050::getFullScaleAccelRange() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_AFS_SEL_BIT, MPU6050_ACONFIG_AFS_SEL_LENGTH, buffer); + return buffer[0]; +} +/** Set full-scale accelerometer range. + * @param range New full-scale accelerometer range setting + * @see getFullScaleAccelRange() + */ +void MPU6050::setFullScaleAccelRange(uint8_t range) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_AFS_SEL_BIT, MPU6050_ACONFIG_AFS_SEL_LENGTH, range); +} +/** Get the high-pass filter configuration. + * The DHPF is a filter module in the path leading to motion detectors (Free + * Fall, Motion threshold, and Zero Motion). The high pass filter output is not + * available to the data registers (see Figure in Section 8 of the MPU-6000/ + * MPU-6050 Product Specification document). + * + * The high pass filter has three modes: + * + * <pre> + * Reset: The filter output settles to zero within one sample. This + * effectively disables the high pass filter. This mode may be toggled + * to quickly settle the filter. + * + * On: The high pass filter will pass signals above the cut off frequency. + * + * Hold: When triggered, the filter holds the present sample. The filter + * output will be the difference between the input sample and the held + * sample. + * </pre> + * + * <pre> + * ACCEL_HPF | Filter Mode | Cut-off Frequency + * ----------+-------------+------------------ + * 0 | Reset | None + * 1 | On | 5Hz + * 2 | On | 2.5Hz + * 3 | On | 1.25Hz + * 4 | On | 0.63Hz + * 7 | Hold | None + * </pre> + * + * @return Current high-pass filter configuration + * @see MPU6050_DHPF_RESET + * @see MPU6050_RA_ACCEL_CONFIG + */ +uint8_t MPU6050::getDHPFMode() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_ACCEL_HPF_BIT, MPU6050_ACONFIG_ACCEL_HPF_LENGTH, buffer); + return buffer[0]; +} +/** Set the high-pass filter configuration. + * @param bandwidth New high-pass filter configuration + * @see setDHPFMode() + * @see MPU6050_DHPF_RESET + * @see MPU6050_RA_ACCEL_CONFIG + */ +void MPU6050::setDHPFMode(uint8_t bandwidth) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_ACCEL_HPF_BIT, MPU6050_ACONFIG_ACCEL_HPF_LENGTH, bandwidth); +} + +// FF_THR register + +/** Get free-fall event acceleration threshold. + * This register configures the detection threshold for Free Fall event + * detection. The unit of FF_THR is 1LSB = 2mg. Free Fall is detected when the + * absolute value of the accelerometer measurements for the three axes are each + * less than the detection threshold. This condition increments the Free Fall + * duration counter (Register 30). The Free Fall interrupt is triggered when the + * Free Fall duration counter reaches the time specified in FF_DUR. + * + * For more details on the Free Fall detection interrupt, see Section 8.2 of the + * MPU-6000/MPU-6050 Product Specification document as well as Registers 56 and + * 58 of this document. + * + * @return Current free-fall acceleration threshold value (LSB = 2mg) + * @see MPU6050_RA_FF_THR + */ +uint8_t MPU6050::getFreefallDetectionThreshold() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_FF_THR, buffer); + return buffer[0]; +} +/** Get free-fall event acceleration threshold. + * @param threshold New free-fall acceleration threshold value (LSB = 2mg) + * @see getFreefallDetectionThreshold() + * @see MPU6050_RA_FF_THR + */ +void MPU6050::setFreefallDetectionThreshold(uint8_t threshold) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_FF_THR, threshold); +} + +// FF_DUR register + +/** Get free-fall event duration threshold. + * This register configures the duration counter threshold for Free Fall event + * detection. The duration counter ticks at 1kHz, therefore FF_DUR has a unit + * of 1 LSB = 1 ms. + * + * The Free Fall duration counter increments while the absolute value of the + * accelerometer measurements are each less than the detection threshold + * (Register 29). The Free Fall interrupt is triggered when the Free Fall + * duration counter reaches the time specified in this register. + * + * For more details on the Free Fall detection interrupt, see Section 8.2 of + * the MPU-6000/MPU-6050 Product Specification document as well as Registers 56 + * and 58 of this document. + * + * @return Current free-fall duration threshold value (LSB = 1ms) + * @see MPU6050_RA_FF_DUR + */ +uint8_t MPU6050::getFreefallDetectionDuration() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_FF_DUR, buffer); + return buffer[0]; +} +/** Get free-fall event duration threshold. + * @param duration New free-fall duration threshold value (LSB = 1ms) + * @see getFreefallDetectionDuration() + * @see MPU6050_RA_FF_DUR + */ +void MPU6050::setFreefallDetectionDuration(uint8_t duration) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_FF_DUR, duration); +} + +// MOT_THR register + +/** Get motion detection event acceleration threshold. + * This register configures the detection threshold for Motion interrupt + * generation. The unit of MOT_THR is 1LSB = 2mg. Motion is detected when the + * absolute value of any of the accelerometer measurements exceeds this Motion + * detection threshold. This condition increments the Motion detection duration + * counter (Register 32). The Motion detection interrupt is triggered when the + * Motion Detection counter reaches the time count specified in MOT_DUR + * (Register 32). + * + * The Motion interrupt will indicate the axis and polarity of detected motion + * in MOT_DETECT_STATUS (Register 97). + * + * For more details on the Motion detection interrupt, see Section 8.3 of the + * MPU-6000/MPU-6050 Product Specification document as well as Registers 56 and + * 58 of this document. + * + * @return Current motion detection acceleration threshold value (LSB = 2mg) + * @see MPU6050_RA_MOT_THR + */ +uint8_t MPU6050::getMotionDetectionThreshold() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_MOT_THR, buffer); + return buffer[0]; +} +/** Set free-fall event acceleration threshold. + * @param threshold New motion detection acceleration threshold value (LSB = 2mg) + * @see getMotionDetectionThreshold() + * @see MPU6050_RA_MOT_THR + */ +void MPU6050::setMotionDetectionThreshold(uint8_t threshold) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_MOT_THR, threshold); +} + +// MOT_DUR register + +/** Get motion detection event duration threshold. + * This register configures the duration counter threshold for Motion interrupt + * generation. The duration counter ticks at 1 kHz, therefore MOT_DUR has a unit + * of 1LSB = 1ms. The Motion detection duration counter increments when the + * absolute value of any of the accelerometer measurements exceeds the Motion + * detection threshold (Register 31). The Motion detection interrupt is + * triggered when the Motion detection counter reaches the time count specified + * in this register. + * + * For more details on the Motion detection interrupt, see Section 8.3 of the + * MPU-6000/MPU-6050 Product Specification document. + * + * @return Current motion detection duration threshold value (LSB = 1ms) + * @see MPU6050_RA_MOT_DUR + */ +uint8_t MPU6050::getMotionDetectionDuration() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_MOT_DUR, buffer); + return buffer[0]; +} +/** Set motion detection event duration threshold. + * @param duration New motion detection duration threshold value (LSB = 1ms) + * @see getMotionDetectionDuration() + * @see MPU6050_RA_MOT_DUR + */ +void MPU6050::setMotionDetectionDuration(uint8_t duration) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_MOT_DUR, duration); +} + +// ZRMOT_THR register + +/** Get zero motion detection event acceleration threshold. + * This register configures the detection threshold for Zero Motion interrupt + * generation. The unit of ZRMOT_THR is 1LSB = 2mg. Zero Motion is detected when + * the absolute value of the accelerometer measurements for the 3 axes are each + * less than the detection threshold. This condition increments the Zero Motion + * duration counter (Register 34). The Zero Motion interrupt is triggered when + * the Zero Motion duration counter reaches the time count specified in + * ZRMOT_DUR (Register 34). + * + * Unlike Free Fall or Motion detection, Zero Motion detection triggers an + * interrupt both when Zero Motion is first detected and when Zero Motion is no + * longer detected. + * + * When a zero motion event is detected, a Zero Motion Status will be indicated + * in the MOT_DETECT_STATUS register (Register 97). When a motion-to-zero-motion + * condition is detected, the status bit is set to 1. When a zero-motion-to- + * motion condition is detected, the status bit is set to 0. + * + * For more details on the Zero Motion detection interrupt, see Section 8.4 of + * the MPU-6000/MPU-6050 Product Specification document as well as Registers 56 + * and 58 of this document. + * + * @return Current zero motion detection acceleration threshold value (LSB = 2mg) + * @see MPU6050_RA_ZRMOT_THR + */ +uint8_t MPU6050::getZeroMotionDetectionThreshold() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_ZRMOT_THR, buffer); + return buffer[0]; +} +/** Set zero motion detection event acceleration threshold. + * @param threshold New zero motion detection acceleration threshold value (LSB = 2mg) + * @see getZeroMotionDetectionThreshold() + * @see MPU6050_RA_ZRMOT_THR + */ +void MPU6050::setZeroMotionDetectionThreshold(uint8_t threshold) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_ZRMOT_THR, threshold); +} + +// ZRMOT_DUR register + +/** Get zero motion detection event duration threshold. + * This register configures the duration counter threshold for Zero Motion + * interrupt generation. The duration counter ticks at 16 Hz, therefore + * ZRMOT_DUR has a unit of 1 LSB = 64 ms. The Zero Motion duration counter + * increments while the absolute value of the accelerometer measurements are + * each less than the detection threshold (Register 33). The Zero Motion + * interrupt is triggered when the Zero Motion duration counter reaches the time + * count specified in this register. + * + * For more details on the Zero Motion detection interrupt, see Section 8.4 of + * the MPU-6000/MPU-6050 Product Specification document, as well as Registers 56 + * and 58 of this document. + * + * @return Current zero motion detection duration threshold value (LSB = 64ms) + * @see MPU6050_RA_ZRMOT_DUR + */ +uint8_t MPU6050::getZeroMotionDetectionDuration() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_ZRMOT_DUR, buffer); + return buffer[0]; +} +/** Set zero motion detection event duration threshold. + * @param duration New zero motion detection duration threshold value (LSB = 1ms) + * @see getZeroMotionDetectionDuration() + * @see MPU6050_RA_ZRMOT_DUR + */ +void MPU6050::setZeroMotionDetectionDuration(uint8_t duration) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_ZRMOT_DUR, duration); +} + +// FIFO_EN register + +/** Get temperature FIFO enabled value. + * When set to 1, this bit enables TEMP_OUT_H and TEMP_OUT_L (Registers 65 and + * 66) to be written into the FIFO buffer. + * @return Current temperature FIFO enabled value + * @see MPU6050_RA_FIFO_EN + */ +bool MPU6050::getTempFIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_TEMP_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set temperature FIFO enabled value. + * @param enabled New temperature FIFO enabled value + * @see getTempFIFOEnabled() + * @see MPU6050_RA_FIFO_EN + */ +void MPU6050::setTempFIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_TEMP_FIFO_EN_BIT, enabled); +} +/** Get gyroscope X-axis FIFO enabled value. + * When set to 1, this bit enables GYRO_XOUT_H and GYRO_XOUT_L (Registers 67 and + * 68) to be written into the FIFO buffer. + * @return Current gyroscope X-axis FIFO enabled value + * @see MPU6050_RA_FIFO_EN + */ +bool MPU6050::getXGyroFIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_XG_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set gyroscope X-axis FIFO enabled value. + * @param enabled New gyroscope X-axis FIFO enabled value + * @see getXGyroFIFOEnabled() + * @see MPU6050_RA_FIFO_EN + */ +void MPU6050::setXGyroFIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_XG_FIFO_EN_BIT, enabled); +} +/** Get gyroscope Y-axis FIFO enabled value. + * When set to 1, this bit enables GYRO_YOUT_H and GYRO_YOUT_L (Registers 69 and + * 70) to be written into the FIFO buffer. + * @return Current gyroscope Y-axis FIFO enabled value + * @see MPU6050_RA_FIFO_EN + */ +bool MPU6050::getYGyroFIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_YG_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set gyroscope Y-axis FIFO enabled value. + * @param enabled New gyroscope Y-axis FIFO enabled value + * @see getYGyroFIFOEnabled() + * @see MPU6050_RA_FIFO_EN + */ +void MPU6050::setYGyroFIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_YG_FIFO_EN_BIT, enabled); +} +/** Get gyroscope Z-axis FIFO enabled value. + * When set to 1, this bit enables GYRO_ZOUT_H and GYRO_ZOUT_L (Registers 71 and + * 72) to be written into the FIFO buffer. + * @return Current gyroscope Z-axis FIFO enabled value + * @see MPU6050_RA_FIFO_EN + */ +bool MPU6050::getZGyroFIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_ZG_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set gyroscope Z-axis FIFO enabled value. + * @param enabled New gyroscope Z-axis FIFO enabled value + * @see getZGyroFIFOEnabled() + * @see MPU6050_RA_FIFO_EN + */ +void MPU6050::setZGyroFIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_ZG_FIFO_EN_BIT, enabled); +} +/** Get accelerometer FIFO enabled value. + * When set to 1, this bit enables ACCEL_XOUT_H, ACCEL_XOUT_L, ACCEL_YOUT_H, + * ACCEL_YOUT_L, ACCEL_ZOUT_H, and ACCEL_ZOUT_L (Registers 59 to 64) to be + * written into the FIFO buffer. + * @return Current accelerometer FIFO enabled value + * @see MPU6050_RA_FIFO_EN + */ +bool MPU6050::getAccelFIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_ACCEL_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set accelerometer FIFO enabled value. + * @param enabled New accelerometer FIFO enabled value + * @see getAccelFIFOEnabled() + * @see MPU6050_RA_FIFO_EN + */ +void MPU6050::setAccelFIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_ACCEL_FIFO_EN_BIT, enabled); +} +/** Get Slave 2 FIFO enabled value. + * When set to 1, this bit enables EXT_SENS_DATA registers (Registers 73 to 96) + * associated with Slave 2 to be written into the FIFO buffer. + * @return Current Slave 2 FIFO enabled value + * @see MPU6050_RA_FIFO_EN + */ +bool MPU6050::getSlave2FIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_SLV2_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set Slave 2 FIFO enabled value. + * @param enabled New Slave 2 FIFO enabled value + * @see getSlave2FIFOEnabled() + * @see MPU6050_RA_FIFO_EN + */ +void MPU6050::setSlave2FIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_SLV2_FIFO_EN_BIT, enabled); +} +/** Get Slave 1 FIFO enabled value. + * When set to 1, this bit enables EXT_SENS_DATA registers (Registers 73 to 96) + * associated with Slave 1 to be written into the FIFO buffer. + * @return Current Slave 1 FIFO enabled value + * @see MPU6050_RA_FIFO_EN + */ +bool MPU6050::getSlave1FIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_SLV1_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set Slave 1 FIFO enabled value. + * @param enabled New Slave 1 FIFO enabled value + * @see getSlave1FIFOEnabled() + * @see MPU6050_RA_FIFO_EN + */ +void MPU6050::setSlave1FIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_SLV1_FIFO_EN_BIT, enabled); +} +/** Get Slave 0 FIFO enabled value. + * When set to 1, this bit enables EXT_SENS_DATA registers (Registers 73 to 96) + * associated with Slave 0 to be written into the FIFO buffer. + * @return Current Slave 0 FIFO enabled value + * @see MPU6050_RA_FIFO_EN + */ +bool MPU6050::getSlave0FIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_SLV0_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set Slave 0 FIFO enabled value. + * @param enabled New Slave 0 FIFO enabled value + * @see getSlave0FIFOEnabled() + * @see MPU6050_RA_FIFO_EN + */ +void MPU6050::setSlave0FIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_FIFO_EN, MPU6050_SLV0_FIFO_EN_BIT, enabled); +} + +// I2C_MST_CTRL register + +/** Get multi-master enabled value. + * Multi-master capability allows multiple I2C masters to operate on the same + * bus. In circuits where multi-master capability is required, set MULT_MST_EN + * to 1. This will increase current drawn by approximately 30uA. + * + * In circuits where multi-master capability is required, the state of the I2C + * bus must always be monitored by each separate I2C Master. Before an I2C + * Master can assume arbitration of the bus, it must first confirm that no other + * I2C Master has arbitration of the bus. When MULT_MST_EN is set to 1, the + * MPU-60X0's bus arbitration detection logic is turned on, enabling it to + * detect when the bus is available. + * + * @return Current multi-master enabled value + * @see MPU6050_RA_I2C_MST_CTRL + */ +bool MPU6050::getMultiMasterEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_MULT_MST_EN_BIT, buffer); + return buffer[0]; +} +/** Set multi-master enabled value. + * @param enabled New multi-master enabled value + * @see getMultiMasterEnabled() + * @see MPU6050_RA_I2C_MST_CTRL + */ +void MPU6050::setMultiMasterEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_MULT_MST_EN_BIT, enabled); +} +/** Get wait-for-external-sensor-data enabled value. + * When the WAIT_FOR_ES bit is set to 1, the Data Ready interrupt will be + * delayed until External Sensor data from the Slave Devices are loaded into the + * EXT_SENS_DATA registers. This is used to ensure that both the internal sensor + * data (i.e. from gyro and accel) and external sensor data have been loaded to + * their respective data registers (i.e. the data is synced) when the Data Ready + * interrupt is triggered. + * + * @return Current wait-for-external-sensor-data enabled value + * @see MPU6050_RA_I2C_MST_CTRL + */ +bool MPU6050::getWaitForExternalSensorEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_WAIT_FOR_ES_BIT, buffer); + return buffer[0]; +} +/** Set wait-for-external-sensor-data enabled value. + * @param enabled New wait-for-external-sensor-data enabled value + * @see getWaitForExternalSensorEnabled() + * @see MPU6050_RA_I2C_MST_CTRL + */ +void MPU6050::setWaitForExternalSensorEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_WAIT_FOR_ES_BIT, enabled); +} +/** Get Slave 3 FIFO enabled value. + * When set to 1, this bit enables EXT_SENS_DATA registers (Registers 73 to 96) + * associated with Slave 3 to be written into the FIFO buffer. + * @return Current Slave 3 FIFO enabled value + * @see MPU6050_RA_MST_CTRL + */ +bool MPU6050::getSlave3FIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_SLV_3_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set Slave 3 FIFO enabled value. + * @param enabled New Slave 3 FIFO enabled value + * @see getSlave3FIFOEnabled() + * @see MPU6050_RA_MST_CTRL + */ +void MPU6050::setSlave3FIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_SLV_3_FIFO_EN_BIT, enabled); +} +/** Get slave read/write transition enabled value. + * The I2C_MST_P_NSR bit configures the I2C Master's transition from one slave + * read to the next slave read. If the bit equals 0, there will be a restart + * between reads. If the bit equals 1, there will be a stop followed by a start + * of the following read. When a write transaction follows a read transaction, + * the stop followed by a start of the successive write will be always used. + * + * @return Current slave read/write transition enabled value + * @see MPU6050_RA_I2C_MST_CTRL + */ +bool MPU6050::getSlaveReadWriteTransitionEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_I2C_MST_P_NSR_BIT, buffer); + return buffer[0]; +} +/** Set slave read/write transition enabled value. + * @param enabled New slave read/write transition enabled value + * @see getSlaveReadWriteTransitionEnabled() + * @see MPU6050_RA_I2C_MST_CTRL + */ +void MPU6050::setSlaveReadWriteTransitionEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_I2C_MST_P_NSR_BIT, enabled); +} +/** Get I2C master clock speed. + * I2C_MST_CLK is a 4 bit unsigned value which configures a divider on the + * MPU-60X0 internal 8MHz clock. It sets the I2C master clock speed according to + * the following table: + * + * <pre> + * I2C_MST_CLK | I2C Master Clock Speed | 8MHz Clock Divider + * ------------+------------------------+------------------- + * 0 | 348kHz | 23 + * 1 | 333kHz | 24 + * 2 | 320kHz | 25 + * 3 | 308kHz | 26 + * 4 | 296kHz | 27 + * 5 | 286kHz | 28 + * 6 | 276kHz | 29 + * 7 | 267kHz | 30 + * 8 | 258kHz | 31 + * 9 | 500kHz | 16 + * 10 | 471kHz | 17 + * 11 | 444kHz | 18 + * 12 | 421kHz | 19 + * 13 | 400kHz | 20 + * 14 | 381kHz | 21 + * 15 | 364kHz | 22 + * </pre> + * + * @return Current I2C master clock speed + * @see MPU6050_RA_I2C_MST_CTRL + */ +uint8_t MPU6050::getMasterClockSpeed() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_I2C_MST_CLK_BIT, MPU6050_I2C_MST_CLK_LENGTH, buffer); + return buffer[0]; +} +/** Set I2C master clock speed. + * @reparam speed Current I2C master clock speed + * @see MPU6050_RA_I2C_MST_CTRL + */ +void MPU6050::setMasterClockSpeed(uint8_t speed) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_I2C_MST_CTRL, MPU6050_I2C_MST_CLK_BIT, MPU6050_I2C_MST_CLK_LENGTH, speed); +} + +// I2C_SLV* registers (Slave 0-3) + +/** Get the I2C address of the specified slave (0-3). + * Note that Bit 7 (MSB) controls read/write mode. If Bit 7 is set, it's a read + * operation, and if it is cleared, then it's a write operation. The remaining + * bits (6-0) are the 7-bit device address of the slave device. + * + * In read mode, the result of the read is placed in the lowest available + * EXT_SENS_DATA register. For further information regarding the allocation of + * read results, please refer to the EXT_SENS_DATA register description + * (Registers 73 - 96). + * + * The MPU-6050 supports a total of five slaves, but Slave 4 has unique + * characteristics, and so it has its own functions (getSlave4* and setSlave4*). + * + * I2C data transactions are performed at the Sample Rate, as defined in + * Register 25. The user is responsible for ensuring that I2C data transactions + * to and from each enabled Slave can be completed within a single period of the + * Sample Rate. + * + * The I2C slave access rate can be reduced relative to the Sample Rate. This + * reduced access rate is determined by I2C_MST_DLY (Register 52). Whether a + * slave's access rate is reduced relative to the Sample Rate is determined by + * I2C_MST_DELAY_CTRL (Register 103). + * + * The processing order for the slaves is fixed. The sequence followed for + * processing the slaves is Slave 0, Slave 1, Slave 2, Slave 3 and Slave 4. If a + * particular Slave is disabled it will be skipped. + * + * Each slave can either be accessed at the sample rate or at a reduced sample + * rate. In a case where some slaves are accessed at the Sample Rate and some + * slaves are accessed at the reduced rate, the sequence of accessing the slaves + * (Slave 0 to Slave 4) is still followed. However, the reduced rate slaves will + * be skipped if their access rate dictates that they should not be accessed + * during that particular cycle. For further information regarding the reduced + * access rate, please refer to Register 52. Whether a slave is accessed at the + * Sample Rate or at the reduced rate is determined by the Delay Enable bits in + * Register 103. + * + * @param num Slave number (0-3) + * @return Current address for specified slave + * @see MPU6050_RA_I2C_SLV0_ADDR + */ +uint8_t MPU6050::getSlaveAddress(uint8_t num) +{ + if (num > 3) return 0; + i2Cdev.readByte(devAddr, MPU6050_RA_I2C_SLV0_ADDR + num*3, buffer); + return buffer[0]; +} +/** Set the I2C address of the specified slave (0-3). + * @param num Slave number (0-3) + * @param address New address for specified slave + * @see getSlaveAddress() + * @see MPU6050_RA_I2C_SLV0_ADDR + */ +void MPU6050::setSlaveAddress(uint8_t num, uint8_t address) +{ + if (num > 3) return; + i2Cdev.writeByte(devAddr, MPU6050_RA_I2C_SLV0_ADDR + num*3, address); +} +/** Get the active internal register for the specified slave (0-3). + * Read/write operations for this slave will be done to whatever internal + * register address is stored in this MPU register. + * + * The MPU-6050 supports a total of five slaves, but Slave 4 has unique + * characteristics, and so it has its own functions. + * + * @param num Slave number (0-3) + * @return Current active register for specified slave + * @see MPU6050_RA_I2C_SLV0_REG + */ +uint8_t MPU6050::getSlaveRegister(uint8_t num) +{ + if (num > 3) return 0; + i2Cdev.readByte(devAddr, MPU6050_RA_I2C_SLV0_REG + num*3, buffer); + return buffer[0]; +} +/** Set the active internal register for the specified slave (0-3). + * @param num Slave number (0-3) + * @param reg New active register for specified slave + * @see getSlaveRegister() + * @see MPU6050_RA_I2C_SLV0_REG + */ +void MPU6050::setSlaveRegister(uint8_t num, uint8_t reg) +{ + if (num > 3) return; + i2Cdev.writeByte(devAddr, MPU6050_RA_I2C_SLV0_REG + num*3, reg); +} +/** Get the enabled value for the specified slave (0-3). + * When set to 1, this bit enables Slave 0 for data transfer operations. When + * cleared to 0, this bit disables Slave 0 from data transfer operations. + * @param num Slave number (0-3) + * @return Current enabled value for specified slave + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +bool MPU6050::getSlaveEnabled(uint8_t num) +{ + if (num > 3) return 0; + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_EN_BIT, buffer); + return buffer[0]; +} +/** Set the enabled value for the specified slave (0-3). + * @param num Slave number (0-3) + * @param enabled New enabled value for specified slave + * @see getSlaveEnabled() + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +void MPU6050::setSlaveEnabled(uint8_t num, bool enabled) +{ + if (num > 3) return; + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_EN_BIT, enabled); +} +/** Get word pair byte-swapping enabled for the specified slave (0-3). + * When set to 1, this bit enables byte swapping. When byte swapping is enabled, + * the high and low bytes of a word pair are swapped. Please refer to + * I2C_SLV0_GRP for the pairing convention of the word pairs. When cleared to 0, + * bytes transferred to and from Slave 0 will be written to EXT_SENS_DATA + * registers in the order they were transferred. + * + * @param num Slave number (0-3) + * @return Current word pair byte-swapping enabled value for specified slave + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +bool MPU6050::getSlaveWordByteSwap(uint8_t num) +{ + if (num > 3) return 0; + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_BYTE_SW_BIT, buffer); + return buffer[0]; +} +/** Set word pair byte-swapping enabled for the specified slave (0-3). + * @param num Slave number (0-3) + * @param enabled New word pair byte-swapping enabled value for specified slave + * @see getSlaveWordByteSwap() + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +void MPU6050::setSlaveWordByteSwap(uint8_t num, bool enabled) +{ + if (num > 3) return; + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_BYTE_SW_BIT, enabled); +} +/** Get write mode for the specified slave (0-3). + * When set to 1, the transaction will read or write data only. When cleared to + * 0, the transaction will write a register address prior to reading or writing + * data. This should equal 0 when specifying the register address within the + * Slave device to/from which the ensuing data transaction will take place. + * + * @param num Slave number (0-3) + * @return Current write mode for specified slave (0 = register address + data, 1 = data only) + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +bool MPU6050::getSlaveWriteMode(uint8_t num) +{ + if (num > 3) return 0; + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_REG_DIS_BIT, buffer); + return buffer[0]; +} +/** Set write mode for the specified slave (0-3). + * @param num Slave number (0-3) + * @param mode New write mode for specified slave (0 = register address + data, 1 = data only) + * @see getSlaveWriteMode() + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +void MPU6050::setSlaveWriteMode(uint8_t num, bool mode) +{ + if (num > 3) return; + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_REG_DIS_BIT, mode); +} +/** Get word pair grouping order offset for the specified slave (0-3). + * This sets specifies the grouping order of word pairs received from registers. + * When cleared to 0, bytes from register addresses 0 and 1, 2 and 3, etc (even, + * then odd register addresses) are paired to form a word. When set to 1, bytes + * from register addresses are paired 1 and 2, 3 and 4, etc. (odd, then even + * register addresses) are paired to form a word. + * + * @param num Slave number (0-3) + * @return Current word pair grouping order offset for specified slave + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +bool MPU6050::getSlaveWordGroupOffset(uint8_t num) +{ + if (num > 3) return 0; + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_GRP_BIT, buffer); + return buffer[0]; +} +/** Set word pair grouping order offset for the specified slave (0-3). + * @param num Slave number (0-3) + * @param enabled New word pair grouping order offset for specified slave + * @see getSlaveWordGroupOffset() + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +void MPU6050::setSlaveWordGroupOffset(uint8_t num, bool enabled) +{ + if (num > 3) return; + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_GRP_BIT, enabled); +} +/** Get number of bytes to read for the specified slave (0-3). + * Specifies the number of bytes transferred to and from Slave 0. Clearing this + * bit to 0 is equivalent to disabling the register by writing 0 to I2C_SLV0_EN. + * @param num Slave number (0-3) + * @return Number of bytes to read for specified slave + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +uint8_t MPU6050::getSlaveDataLength(uint8_t num) +{ + if (num > 3) return 0; + i2Cdev.readBits(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_LEN_BIT, MPU6050_I2C_SLV_LEN_LENGTH, buffer); + return buffer[0]; +} +/** Set number of bytes to read for the specified slave (0-3). + * @param num Slave number (0-3) + * @param length Number of bytes to read for specified slave + * @see getSlaveDataLength() + * @see MPU6050_RA_I2C_SLV0_CTRL + */ +void MPU6050::setSlaveDataLength(uint8_t num, uint8_t length) +{ + if (num > 3) return; + i2Cdev.writeBits(devAddr, MPU6050_RA_I2C_SLV0_CTRL + num*3, MPU6050_I2C_SLV_LEN_BIT, MPU6050_I2C_SLV_LEN_LENGTH, length); +} + +// I2C_SLV* registers (Slave 4) + +/** Get the I2C address of Slave 4. + * Note that Bit 7 (MSB) controls read/write mode. If Bit 7 is set, it's a read + * operation, and if it is cleared, then it's a write operation. The remaining + * bits (6-0) are the 7-bit device address of the slave device. + * + * @return Current address for Slave 4 + * @see getSlaveAddress() + * @see MPU6050_RA_I2C_SLV4_ADDR + */ +uint8_t MPU6050::getSlave4Address() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_I2C_SLV4_ADDR, buffer); + return buffer[0]; +} +/** Set the I2C address of Slave 4. + * @param address New address for Slave 4 + * @see getSlave4Address() + * @see MPU6050_RA_I2C_SLV4_ADDR + */ +void MPU6050::setSlave4Address(uint8_t address) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_I2C_SLV4_ADDR, address); +} +/** Get the active internal register for the Slave 4. + * Read/write operations for this slave will be done to whatever internal + * register address is stored in this MPU register. + * + * @return Current active register for Slave 4 + * @see MPU6050_RA_I2C_SLV4_REG + */ +uint8_t MPU6050::getSlave4Register() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_I2C_SLV4_REG, buffer); + return buffer[0]; +} +/** Set the active internal register for Slave 4. + * @param reg New active register for Slave 4 + * @see getSlave4Register() + * @see MPU6050_RA_I2C_SLV4_REG + */ +void MPU6050::setSlave4Register(uint8_t reg) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_I2C_SLV4_REG, reg); +} +/** Set new byte to write to Slave 4. + * This register stores the data to be written into the Slave 4. If I2C_SLV4_RW + * is set 1 (set to read), this register has no effect. + * @param data New byte to write to Slave 4 + * @see MPU6050_RA_I2C_SLV4_DO + */ +void MPU6050::setSlave4OutputByte(uint8_t data) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_I2C_SLV4_DO, data); +} +/** Get the enabled value for the Slave 4. + * When set to 1, this bit enables Slave 4 for data transfer operations. When + * cleared to 0, this bit disables Slave 4 from data transfer operations. + * @return Current enabled value for Slave 4 + * @see MPU6050_RA_I2C_SLV4_CTRL + */ +bool MPU6050::getSlave4Enabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_SLV4_CTRL, MPU6050_I2C_SLV4_EN_BIT, buffer); + return buffer[0]; +} +/** Set the enabled value for Slave 4. + * @param enabled New enabled value for Slave 4 + * @see getSlave4Enabled() + * @see MPU6050_RA_I2C_SLV4_CTRL + */ +void MPU6050::setSlave4Enabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_SLV4_CTRL, MPU6050_I2C_SLV4_EN_BIT, enabled); +} +/** Get the enabled value for Slave 4 transaction interrupts. + * When set to 1, this bit enables the generation of an interrupt signal upon + * completion of a Slave 4 transaction. When cleared to 0, this bit disables the + * generation of an interrupt signal upon completion of a Slave 4 transaction. + * The interrupt status can be observed in Register 54. + * + * @return Current enabled value for Slave 4 transaction interrupts. + * @see MPU6050_RA_I2C_SLV4_CTRL + */ +bool MPU6050::getSlave4InterruptEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_SLV4_CTRL, MPU6050_I2C_SLV4_INT_EN_BIT, buffer); + return buffer[0]; +} +/** Set the enabled value for Slave 4 transaction interrupts. + * @param enabled New enabled value for Slave 4 transaction interrupts. + * @see getSlave4InterruptEnabled() + * @see MPU6050_RA_I2C_SLV4_CTRL + */ +void MPU6050::setSlave4InterruptEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_SLV4_CTRL, MPU6050_I2C_SLV4_INT_EN_BIT, enabled); +} +/** Get write mode for Slave 4. + * When set to 1, the transaction will read or write data only. When cleared to + * 0, the transaction will write a register address prior to reading or writing + * data. This should equal 0 when specifying the register address within the + * Slave device to/from which the ensuing data transaction will take place. + * + * @return Current write mode for Slave 4 (0 = register address + data, 1 = data only) + * @see MPU6050_RA_I2C_SLV4_CTRL + */ +bool MPU6050::getSlave4WriteMode() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_SLV4_CTRL, MPU6050_I2C_SLV4_REG_DIS_BIT, buffer); + return buffer[0]; +} +/** Set write mode for the Slave 4. + * @param mode New write mode for Slave 4 (0 = register address + data, 1 = data only) + * @see getSlave4WriteMode() + * @see MPU6050_RA_I2C_SLV4_CTRL + */ +void MPU6050::setSlave4WriteMode(bool mode) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_SLV4_CTRL, MPU6050_I2C_SLV4_REG_DIS_BIT, mode); +} +/** Get Slave 4 master delay value. + * This configures the reduced access rate of I2C slaves relative to the Sample + * Rate. When a slave's access rate is decreased relative to the Sample Rate, + * the slave is accessed every: + * + * 1 / (1 + I2C_MST_DLY) samples + * + * This base Sample Rate in turn is determined by SMPLRT_DIV (register 25) and + * DLPF_CFG (register 26). Whether a slave's access rate is reduced relative to + * the Sample Rate is determined by I2C_MST_DELAY_CTRL (register 103). For + * further information regarding the Sample Rate, please refer to register 25. + * + * @return Current Slave 4 master delay value + * @see MPU6050_RA_I2C_SLV4_CTRL + */ +uint8_t MPU6050::getSlave4MasterDelay() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_I2C_SLV4_CTRL, MPU6050_I2C_SLV4_MST_DLY_BIT, MPU6050_I2C_SLV4_MST_DLY_LENGTH, buffer); + return buffer[0]; +} +/** Set Slave 4 master delay value. + * @param delay New Slave 4 master delay value + * @see getSlave4MasterDelay() + * @see MPU6050_RA_I2C_SLV4_CTRL + */ +void MPU6050::setSlave4MasterDelay(uint8_t delay) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_I2C_SLV4_CTRL, MPU6050_I2C_SLV4_MST_DLY_BIT, MPU6050_I2C_SLV4_MST_DLY_LENGTH, delay); +} +/** Get last available byte read from Slave 4. + * This register stores the data read from Slave 4. This field is populated + * after a read transaction. + * @return Last available byte read from to Slave 4 + * @see MPU6050_RA_I2C_SLV4_DI + */ +uint8_t MPU6050::getSlate4InputByte() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_I2C_SLV4_DI, buffer); + return buffer[0]; +} + +// I2C_MST_STATUS register + +/** Get FSYNC interrupt status. + * This bit reflects the status of the FSYNC interrupt from an external device + * into the MPU-60X0. This is used as a way to pass an external interrupt + * through the MPU-60X0 to the host application processor. When set to 1, this + * bit will cause an interrupt if FSYNC_INT_EN is asserted in INT_PIN_CFG + * (Register 55). + * @return FSYNC interrupt status + * @see MPU6050_RA_I2C_MST_STATUS + */ +bool MPU6050::getPassthroughStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_STATUS, MPU6050_MST_PASS_THROUGH_BIT, buffer); + return buffer[0]; +} +/** Get Slave 4 transaction done status. + * Automatically sets to 1 when a Slave 4 transaction has completed. This + * triggers an interrupt if the I2C_MST_INT_EN bit in the INT_ENABLE register + * (Register 56) is asserted and if the SLV_4_DONE_INT bit is asserted in the + * I2C_SLV4_CTRL register (Register 52). + * @return Slave 4 transaction done status + * @see MPU6050_RA_I2C_MST_STATUS + */ +bool MPU6050::getSlave4IsDone() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_STATUS, MPU6050_MST_I2C_SLV4_DONE_BIT, buffer); + return buffer[0]; +} +/** Get master arbitration lost status. + * This bit automatically sets to 1 when the I2C Master has lost arbitration of + * the auxiliary I2C bus (an error condition). This triggers an interrupt if the + * I2C_MST_INT_EN bit in the INT_ENABLE register (Register 56) is asserted. + * @return Master arbitration lost status + * @see MPU6050_RA_I2C_MST_STATUS + */ +bool MPU6050::getLostArbitration() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_STATUS, MPU6050_MST_I2C_LOST_ARB_BIT, buffer); + return buffer[0]; +} +/** Get Slave 4 NACK status. + * This bit automatically sets to 1 when the I2C Master receives a NACK in a + * transaction with Slave 4. This triggers an interrupt if the I2C_MST_INT_EN + * bit in the INT_ENABLE register (Register 56) is asserted. + * @return Slave 4 NACK interrupt status + * @see MPU6050_RA_I2C_MST_STATUS + */ +bool MPU6050::getSlave4Nack() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_STATUS, MPU6050_MST_I2C_SLV4_NACK_BIT, buffer); + return buffer[0]; +} +/** Get Slave 3 NACK status. + * This bit automatically sets to 1 when the I2C Master receives a NACK in a + * transaction with Slave 3. This triggers an interrupt if the I2C_MST_INT_EN + * bit in the INT_ENABLE register (Register 56) is asserted. + * @return Slave 3 NACK interrupt status + * @see MPU6050_RA_I2C_MST_STATUS + */ +bool MPU6050::getSlave3Nack() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_STATUS, MPU6050_MST_I2C_SLV3_NACK_BIT, buffer); + return buffer[0]; +} +/** Get Slave 2 NACK status. + * This bit automatically sets to 1 when the I2C Master receives a NACK in a + * transaction with Slave 2. This triggers an interrupt if the I2C_MST_INT_EN + * bit in the INT_ENABLE register (Register 56) is asserted. + * @return Slave 2 NACK interrupt status + * @see MPU6050_RA_I2C_MST_STATUS + */ +bool MPU6050::getSlave2Nack() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_STATUS, MPU6050_MST_I2C_SLV2_NACK_BIT, buffer); + return buffer[0]; +} +/** Get Slave 1 NACK status. + * This bit automatically sets to 1 when the I2C Master receives a NACK in a + * transaction with Slave 1. This triggers an interrupt if the I2C_MST_INT_EN + * bit in the INT_ENABLE register (Register 56) is asserted. + * @return Slave 1 NACK interrupt status + * @see MPU6050_RA_I2C_MST_STATUS + */ +bool MPU6050::getSlave1Nack() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_STATUS, MPU6050_MST_I2C_SLV1_NACK_BIT, buffer); + return buffer[0]; +} +/** Get Slave 0 NACK status. + * This bit automatically sets to 1 when the I2C Master receives a NACK in a + * transaction with Slave 0. This triggers an interrupt if the I2C_MST_INT_EN + * bit in the INT_ENABLE register (Register 56) is asserted. + * @return Slave 0 NACK interrupt status + * @see MPU6050_RA_I2C_MST_STATUS + */ +bool MPU6050::getSlave0Nack() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_STATUS, MPU6050_MST_I2C_SLV0_NACK_BIT, buffer); + return buffer[0]; +} + +// INT_PIN_CFG register + +/** Get interrupt logic level mode. + * Will be set 0 for active-high, 1 for active-low. + * @return Current interrupt mode (0=active-high, 1=active-low) + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_INT_LEVEL_BIT + */ +bool MPU6050::getInterruptMode() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_INT_LEVEL_BIT, buffer); + return buffer[0]; +} +/** Set interrupt logic level mode. + * @param mode New interrupt mode (0=active-high, 1=active-low) + * @see getInterruptMode() + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_INT_LEVEL_BIT + */ +void MPU6050::setInterruptMode(bool mode) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_INT_LEVEL_BIT, mode); +} +/** Get interrupt drive mode. + * Will be set 0 for push-pull, 1 for open-drain. + * @return Current interrupt drive mode (0=push-pull, 1=open-drain) + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_INT_OPEN_BIT + */ +bool MPU6050::getInterruptDrive() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_INT_OPEN_BIT, buffer); + return buffer[0]; +} +/** Set interrupt drive mode. + * @param drive New interrupt drive mode (0=push-pull, 1=open-drain) + * @see getInterruptDrive() + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_INT_OPEN_BIT + */ +void MPU6050::setInterruptDrive(bool drive) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_INT_OPEN_BIT, drive); +} +/** Get interrupt latch mode. + * Will be set 0 for 50us-pulse, 1 for latch-until-int-cleared. + * @return Current latch mode (0=50us-pulse, 1=latch-until-int-cleared) + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_LATCH_INT_EN_BIT + */ +bool MPU6050::getInterruptLatch() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_LATCH_INT_EN_BIT, buffer); + return buffer[0]; +} +/** Set interrupt latch mode. + * @param latch New latch mode (0=50us-pulse, 1=latch-until-int-cleared) + * @see getInterruptLatch() + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_LATCH_INT_EN_BIT + */ +void MPU6050::setInterruptLatch(bool latch) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_LATCH_INT_EN_BIT, latch); +} +/** Get interrupt latch clear mode. + * Will be set 0 for status-read-only, 1 for any-register-read. + * @return Current latch clear mode (0=status-read-only, 1=any-register-read) + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_INT_RD_CLEAR_BIT + */ +bool MPU6050::getInterruptLatchClear() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_INT_RD_CLEAR_BIT, buffer); + return buffer[0]; +} +/** Set interrupt latch clear mode. + * @param clear New latch clear mode (0=status-read-only, 1=any-register-read) + * @see getInterruptLatchClear() + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_INT_RD_CLEAR_BIT + */ +void MPU6050::setInterruptLatchClear(bool clear) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_INT_RD_CLEAR_BIT, clear); +} +/** Get FSYNC interrupt logic level mode. + * @return Current FSYNC interrupt mode (0=active-high, 1=active-low) + * @see getFSyncInterruptMode() + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_FSYNC_INT_LEVEL_BIT + */ +bool MPU6050::getFSyncInterruptLevel() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_FSYNC_INT_LEVEL_BIT, buffer); + return buffer[0]; +} +/** Set FSYNC interrupt logic level mode. + * @param mode New FSYNC interrupt mode (0=active-high, 1=active-low) + * @see getFSyncInterruptMode() + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_FSYNC_INT_LEVEL_BIT + */ +void MPU6050::setFSyncInterruptLevel(bool level) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_FSYNC_INT_LEVEL_BIT, level); +} +/** Get FSYNC pin interrupt enabled setting. + * Will be set 0 for disabled, 1 for enabled. + * @return Current interrupt enabled setting + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_FSYNC_INT_EN_BIT + */ +bool MPU6050::getFSyncInterruptEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_FSYNC_INT_EN_BIT, buffer); + return buffer[0]; +} +/** Set FSYNC pin interrupt enabled setting. + * @param enabled New FSYNC pin interrupt enabled setting + * @see getFSyncInterruptEnabled() + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_FSYNC_INT_EN_BIT + */ +void MPU6050::setFSyncInterruptEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_FSYNC_INT_EN_BIT, enabled); +} +/** Get I2C bypass enabled status. + * When this bit is equal to 1 and I2C_MST_EN (Register 106 bit[5]) is equal to + * 0, the host application processor will be able to directly access the + * auxiliary I2C bus of the MPU-60X0. When this bit is equal to 0, the host + * application processor will not be able to directly access the auxiliary I2C + * bus of the MPU-60X0 regardless of the state of I2C_MST_EN (Register 106 + * bit[5]). + * @return Current I2C bypass enabled status + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_I2C_BYPASS_EN_BIT + */ +bool MPU6050::getI2CBypassEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_I2C_BYPASS_EN_BIT, buffer); + return buffer[0]; +} +/** Set I2C bypass enabled status. + * When this bit is equal to 1 and I2C_MST_EN (Register 106 bit[5]) is equal to + * 0, the host application processor will be able to directly access the + * auxiliary I2C bus of the MPU-60X0. When this bit is equal to 0, the host + * application processor will not be able to directly access the auxiliary I2C + * bus of the MPU-60X0 regardless of the state of I2C_MST_EN (Register 106 + * bit[5]). + * @param enabled New I2C bypass enabled status + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_I2C_BYPASS_EN_BIT + */ +void MPU6050::setI2CBypassEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_I2C_BYPASS_EN_BIT, enabled); +} +/** Get reference clock output enabled status. + * When this bit is equal to 1, a reference clock output is provided at the + * CLKOUT pin. When this bit is equal to 0, the clock output is disabled. For + * further information regarding CLKOUT, please refer to the MPU-60X0 Product + * Specification document. + * @return Current reference clock output enabled status + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_CLKOUT_EN_BIT + */ +bool MPU6050::getClockOutputEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_CLKOUT_EN_BIT, buffer); + return buffer[0]; +} +/** Set reference clock output enabled status. + * When this bit is equal to 1, a reference clock output is provided at the + * CLKOUT pin. When this bit is equal to 0, the clock output is disabled. For + * further information regarding CLKOUT, please refer to the MPU-60X0 Product + * Specification document. + * @param enabled New reference clock output enabled status + * @see MPU6050_RA_INT_PIN_CFG + * @see MPU6050_INTCFG_CLKOUT_EN_BIT + */ +void MPU6050::setClockOutputEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_PIN_CFG, MPU6050_INTCFG_CLKOUT_EN_BIT, enabled); +} + +// INT_ENABLE register + +/** Get full interrupt enabled status. + * Full register byte for all interrupts, for quick reading. Each bit will be + * set 0 for disabled, 1 for enabled. + * @return Current interrupt enabled status + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_FF_BIT + **/ +uint8_t MPU6050::getIntEnabled() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_INT_ENABLE, buffer); + return buffer[0]; +} +/** Set full interrupt enabled status. + * Full register byte for all interrupts, for quick reading. Each bit should be + * set 0 for disabled, 1 for enabled. + * @param enabled New interrupt enabled status + * @see getIntFreefallEnabled() + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_FF_BIT + **/ +void MPU6050::setIntEnabled(uint8_t enabled) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_INT_ENABLE, enabled); +} +/** Get Free Fall interrupt enabled status. + * Will be set 0 for disabled, 1 for enabled. + * @return Current interrupt enabled status + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_FF_BIT + **/ +bool MPU6050::getIntFreefallEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_FF_BIT, buffer); + return buffer[0]; +} +/** Set Free Fall interrupt enabled status. + * @param enabled New interrupt enabled status + * @see getIntFreefallEnabled() + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_FF_BIT + **/ +void MPU6050::setIntFreefallEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_FF_BIT, enabled); +} +/** Get Motion Detection interrupt enabled status. + * Will be set 0 for disabled, 1 for enabled. + * @return Current interrupt enabled status + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_MOT_BIT + **/ +bool MPU6050::getIntMotionEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_MOT_BIT, buffer); + return buffer[0]; +} +/** Set Motion Detection interrupt enabled status. + * @param enabled New interrupt enabled status + * @see getIntMotionEnabled() + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_MOT_BIT + **/ +void MPU6050::setIntMotionEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_MOT_BIT, enabled); +} +/** Get Zero Motion Detection interrupt enabled status. + * Will be set 0 for disabled, 1 for enabled. + * @return Current interrupt enabled status + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_ZMOT_BIT + **/ +bool MPU6050::getIntZeroMotionEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_ZMOT_BIT, buffer); + return buffer[0]; +} +/** Set Zero Motion Detection interrupt enabled status. + * @param enabled New interrupt enabled status + * @see getIntZeroMotionEnabled() + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_ZMOT_BIT + **/ +void MPU6050::setIntZeroMotionEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_ZMOT_BIT, enabled); +} +/** Get FIFO Buffer Overflow interrupt enabled status. + * Will be set 0 for disabled, 1 for enabled. + * @return Current interrupt enabled status + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_FIFO_OFLOW_BIT + **/ +bool MPU6050::getIntFIFOBufferOverflowEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_FIFO_OFLOW_BIT, buffer); + return buffer[0]; +} +/** Set FIFO Buffer Overflow interrupt enabled status. + * @param enabled New interrupt enabled status + * @see getIntFIFOBufferOverflowEnabled() + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_FIFO_OFLOW_BIT + **/ +void MPU6050::setIntFIFOBufferOverflowEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_FIFO_OFLOW_BIT, enabled); +} +/** Get I2C Master interrupt enabled status. + * This enables any of the I2C Master interrupt sources to generate an + * interrupt. Will be set 0 for disabled, 1 for enabled. + * @return Current interrupt enabled status + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_I2C_MST_INT_BIT + **/ +bool MPU6050::getIntI2CMasterEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_I2C_MST_INT_BIT, buffer); + return buffer[0]; +} +/** Set I2C Master interrupt enabled status. + * @param enabled New interrupt enabled status + * @see getIntI2CMasterEnabled() + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_I2C_MST_INT_BIT + **/ +void MPU6050::setIntI2CMasterEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_I2C_MST_INT_BIT, enabled); +} +/** Get Data Ready interrupt enabled setting. + * This event occurs each time a write operation to all of the sensor registers + * has been completed. Will be set 0 for disabled, 1 for enabled. + * @return Current interrupt enabled status + * @see MPU6050_RA_INT_ENABLE + * @see MPU6050_INTERRUPT_DATA_RDY_BIT + */ +bool MPU6050::getIntDataReadyEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_DATA_RDY_BIT, buffer); + return buffer[0]; +} +/** Set Data Ready interrupt enabled status. + * @param enabled New interrupt enabled status + * @see getIntDataReadyEnabled() + * @see MPU6050_RA_INT_CFG + * @see MPU6050_INTERRUPT_DATA_RDY_BIT + */ +void MPU6050::setIntDataReadyEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_DATA_RDY_BIT, enabled); +} + +// INT_STATUS register + +/** Get full set of interrupt status bits. + * These bits clear to 0 after the register has been read. Very useful + * for getting multiple INT statuses, since each single bit read clears + * all of them because it has to read the whole byte. + * @return Current interrupt status + * @see MPU6050_RA_INT_STATUS + */ +uint8_t MPU6050::getIntStatus() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_INT_STATUS, buffer); + return buffer[0]; +} +/** Get Free Fall interrupt status. + * This bit automatically sets to 1 when a Free Fall interrupt has been + * generated. The bit clears to 0 after the register has been read. + * @return Current interrupt status + * @see MPU6050_RA_INT_STATUS + * @see MPU6050_INTERRUPT_FF_BIT + */ +bool MPU6050::getIntFreefallStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_STATUS, MPU6050_INTERRUPT_FF_BIT, buffer); + return buffer[0]; +} +/** Get Motion Detection interrupt status. + * This bit automatically sets to 1 when a Motion Detection interrupt has been + * generated. The bit clears to 0 after the register has been read. + * @return Current interrupt status + * @see MPU6050_RA_INT_STATUS + * @see MPU6050_INTERRUPT_MOT_BIT + */ +bool MPU6050::getIntMotionStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_STATUS, MPU6050_INTERRUPT_MOT_BIT, buffer); + return buffer[0]; +} +/** Get Zero Motion Detection interrupt status. + * This bit automatically sets to 1 when a Zero Motion Detection interrupt has + * been generated. The bit clears to 0 after the register has been read. + * @return Current interrupt status + * @see MPU6050_RA_INT_STATUS + * @see MPU6050_INTERRUPT_ZMOT_BIT + */ +bool MPU6050::getIntZeroMotionStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_STATUS, MPU6050_INTERRUPT_ZMOT_BIT, buffer); + return buffer[0]; +} +/** Get FIFO Buffer Overflow interrupt status. + * This bit automatically sets to 1 when a Free Fall interrupt has been + * generated. The bit clears to 0 after the register has been read. + * @return Current interrupt status + * @see MPU6050_RA_INT_STATUS + * @see MPU6050_INTERRUPT_FIFO_OFLOW_BIT + */ +bool MPU6050::getIntFIFOBufferOverflowStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_STATUS, MPU6050_INTERRUPT_FIFO_OFLOW_BIT, buffer); + return buffer[0]; +} +/** Get I2C Master interrupt status. + * This bit automatically sets to 1 when an I2C Master interrupt has been + * generated. For a list of I2C Master interrupts, please refer to Register 54. + * The bit clears to 0 after the register has been read. + * @return Current interrupt status + * @see MPU6050_RA_INT_STATUS + * @see MPU6050_INTERRUPT_I2C_MST_INT_BIT + */ +bool MPU6050::getIntI2CMasterStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_STATUS, MPU6050_INTERRUPT_I2C_MST_INT_BIT, buffer); + return buffer[0]; +} +/** Get Data Ready interrupt status. + * This bit automatically sets to 1 when a Data Ready interrupt has been + * generated. The bit clears to 0 after the register has been read. + * @return Current interrupt status + * @see MPU6050_RA_INT_STATUS + * @see MPU6050_INTERRUPT_DATA_RDY_BIT + */ +bool MPU6050::getIntDataReadyStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_STATUS, MPU6050_INTERRUPT_DATA_RDY_BIT, buffer); + return buffer[0]; +} + +// ACCEL_*OUT_* registers + +/** Get raw 9-axis motion sensor readings (accel/gyro/compass). + * FUNCTION NOT FULLY IMPLEMENTED YET. + * @param ax 16-bit signed integer container for accelerometer X-axis value + * @param ay 16-bit signed integer container for accelerometer Y-axis value + * @param az 16-bit signed integer container for accelerometer Z-axis value + * @param gx 16-bit signed integer container for gyroscope X-axis value + * @param gy 16-bit signed integer container for gyroscope Y-axis value + * @param gz 16-bit signed integer container for gyroscope Z-axis value + * @param mx 16-bit signed integer container for magnetometer X-axis value + * @param my 16-bit signed integer container for magnetometer Y-axis value + * @param mz 16-bit signed integer container for magnetometer Z-axis value + * @see getMotion6() + * @see getAcceleration() + * @see getRotation() + * @see MPU6050_RA_ACCEL_XOUT_H + */ +void MPU6050::getMotion9(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz, int16_t* mx, int16_t* my, int16_t* mz) +{ + getMotion6(ax, ay, az, gx, gy, gz); + // TODO: magnetometer integration +} +/** Get raw 6-axis motion sensor readings (accel/gyro). + * Retrieves all currently available motion sensor values. + * @param ax 16-bit signed integer container for accelerometer X-axis value + * @param ay 16-bit signed integer container for accelerometer Y-axis value + * @param az 16-bit signed integer container for accelerometer Z-axis value + * @param gx 16-bit signed integer container for gyroscope X-axis value + * @param gy 16-bit signed integer container for gyroscope Y-axis value + * @param gz 16-bit signed integer container for gyroscope Z-axis value + * @see getAcceleration() + * @see getRotation() + * @see MPU6050_RA_ACCEL_XOUT_H + */ +void MPU6050::getMotion6(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz) +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_ACCEL_XOUT_H, 14, buffer); + *ax = (((int16_t)buffer[0]) << 8) | buffer[1]; + *ay = (((int16_t)buffer[2]) << 8) | buffer[3]; + *az = (((int16_t)buffer[4]) << 8) | buffer[5]; + *gx = (((int16_t)buffer[8]) << 8) | buffer[9]; + *gy = (((int16_t)buffer[10]) << 8) | buffer[11]; + *gz = (((int16_t)buffer[12]) << 8) | buffer[13]; +} +/** Get 3-axis accelerometer readings. + * These registers store the most recent accelerometer measurements. + * Accelerometer measurements are written to these registers at the Sample Rate + * as defined in Register 25. + * + * The accelerometer measurement registers, along with the temperature + * measurement registers, gyroscope measurement registers, and external sensor + * data registers, are composed of two sets of registers: an internal register + * set and a user-facing read register set. + * + * The data within the accelerometer sensors' internal register set is always + * updated at the Sample Rate. Meanwhile, the user-facing read register set + * duplicates the internal register set's data values whenever the serial + * interface is idle. This guarantees that a burst read of sensor registers will + * read measurements from the same sampling instant. Note that if burst reads + * are not used, the user is responsible for ensuring a set of single byte reads + * correspond to a single sampling instant by checking the Data Ready interrupt. + * + * Each 16-bit accelerometer measurement has a full scale defined in ACCEL_FS + * (Register 28). For each full scale setting, the accelerometers' sensitivity + * per LSB in ACCEL_xOUT is shown in the table below: + * + * <pre> + * AFS_SEL | Full Scale Range | LSB Sensitivity + * --------+------------------+---------------- + * 0 | +/- 2g | 8192 LSB/mg + * 1 | +/- 4g | 4096 LSB/mg + * 2 | +/- 8g | 2048 LSB/mg + * 3 | +/- 16g | 1024 LSB/mg + * </pre> + * + * @param x 16-bit signed integer container for X-axis acceleration + * @param y 16-bit signed integer container for Y-axis acceleration + * @param z 16-bit signed integer container for Z-axis acceleration + * @see MPU6050_RA_GYRO_XOUT_H + */ +void MPU6050::getAcceleration(int16_t* x, int16_t* y, int16_t* z) +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_ACCEL_XOUT_H, 6, buffer); + *x = (((int16_t)buffer[0]) << 8) | buffer[1]; + *y = (((int16_t)buffer[2]) << 8) | buffer[3]; + *z = (((int16_t)buffer[4]) << 8) | buffer[5]; +} +/** Get X-axis accelerometer reading. + * @return X-axis acceleration measurement in 16-bit 2's complement format + * @see getMotion6() + * @see MPU6050_RA_ACCEL_XOUT_H + */ +int16_t MPU6050::getAccelerationX() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_ACCEL_XOUT_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +/** Get Y-axis accelerometer reading. + * @return Y-axis acceleration measurement in 16-bit 2's complement format + * @see getMotion6() + * @see MPU6050_RA_ACCEL_YOUT_H + */ +int16_t MPU6050::getAccelerationY() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_ACCEL_YOUT_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +/** Get Z-axis accelerometer reading. + * @return Z-axis acceleration measurement in 16-bit 2's complement format + * @see getMotion6() + * @see MPU6050_RA_ACCEL_ZOUT_H + */ +int16_t MPU6050::getAccelerationZ() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_ACCEL_ZOUT_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} + +// TEMP_OUT_* registers + +/** Get current internal temperature. + * @return Temperature reading in 16-bit 2's complement format + * @see MPU6050_RA_TEMP_OUT_H + */ +int16_t MPU6050::getTemperature() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_TEMP_OUT_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} + +// GYRO_*OUT_* registers + +/** Get 3-axis gyroscope readings. + * These gyroscope measurement registers, along with the accelerometer + * measurement registers, temperature measurement registers, and external sensor + * data registers, are composed of two sets of registers: an internal register + * set and a user-facing read register set. + * The data within the gyroscope sensors' internal register set is always + * updated at the Sample Rate. Meanwhile, the user-facing read register set + * duplicates the internal register set's data values whenever the serial + * interface is idle. This guarantees that a burst read of sensor registers will + * read measurements from the same sampling instant. Note that if burst reads + * are not used, the user is responsible for ensuring a set of single byte reads + * correspond to a single sampling instant by checking the Data Ready interrupt. + * + * Each 16-bit gyroscope measurement has a full scale defined in FS_SEL + * (Register 27). For each full scale setting, the gyroscopes' sensitivity per + * LSB in GYRO_xOUT is shown in the table below: + * + * <pre> + * FS_SEL | Full Scale Range | LSB Sensitivity + * -------+--------------------+---------------- + * 0 | +/- 250 degrees/s | 131 LSB/deg/s + * 1 | +/- 500 degrees/s | 65.5 LSB/deg/s + * 2 | +/- 1000 degrees/s | 32.8 LSB/deg/s + * 3 | +/- 2000 degrees/s | 16.4 LSB/deg/s + * </pre> + * + * @param x 16-bit signed integer container for X-axis rotation + * @param y 16-bit signed integer container for Y-axis rotation + * @param z 16-bit signed integer container for Z-axis rotation + * @see getMotion6() + * @see MPU6050_RA_GYRO_XOUT_H + */ +void MPU6050::getRotation(int16_t* x, int16_t* y, int16_t* z) +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_GYRO_XOUT_H, 6, buffer); + *x = (((int16_t)buffer[0]) << 8) | buffer[1]; + *y = (((int16_t)buffer[2]) << 8) | buffer[3]; + *z = (((int16_t)buffer[4]) << 8) | buffer[5]; +} +/** Get X-axis gyroscope reading. + * @return X-axis rotation measurement in 16-bit 2's complement format + * @see getMotion6() + * @see MPU6050_RA_GYRO_XOUT_H + */ +int16_t MPU6050::getRotationX() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_GYRO_XOUT_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +/** Get Y-axis gyroscope reading. + * @return Y-axis rotation measurement in 16-bit 2's complement format + * @see getMotion6() + * @see MPU6050_RA_GYRO_YOUT_H + */ +int16_t MPU6050::getRotationY() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_GYRO_YOUT_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +/** Get Z-axis gyroscope reading. + * @return Z-axis rotation measurement in 16-bit 2's complement format + * @see getMotion6() + * @see MPU6050_RA_GYRO_ZOUT_H + */ +int16_t MPU6050::getRotationZ() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_GYRO_ZOUT_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} + +// EXT_SENS_DATA_* registers + +/** Read single byte from external sensor data register. + * These registers store data read from external sensors by the Slave 0, 1, 2, + * and 3 on the auxiliary I2C interface. Data read by Slave 4 is stored in + * I2C_SLV4_DI (Register 53). + * + * External sensor data is written to these registers at the Sample Rate as + * defined in Register 25. This access rate can be reduced by using the Slave + * Delay Enable registers (Register 103). + * + * External sensor data registers, along with the gyroscope measurement + * registers, accelerometer measurement registers, and temperature measurement + * registers, are composed of two sets of registers: an internal register set + * and a user-facing read register set. + * + * The data within the external sensors' internal register set is always updated + * at the Sample Rate (or the reduced access rate) whenever the serial interface + * is idle. This guarantees that a burst read of sensor registers will read + * measurements from the same sampling instant. Note that if burst reads are not + * used, the user is responsible for ensuring a set of single byte reads + * correspond to a single sampling instant by checking the Data Ready interrupt. + * + * Data is placed in these external sensor data registers according to + * I2C_SLV0_CTRL, I2C_SLV1_CTRL, I2C_SLV2_CTRL, and I2C_SLV3_CTRL (Registers 39, + * 42, 45, and 48). When more than zero bytes are read (I2C_SLVx_LEN > 0) from + * an enabled slave (I2C_SLVx_EN = 1), the slave is read at the Sample Rate (as + * defined in Register 25) or delayed rate (if specified in Register 52 and + * 103). During each Sample cycle, slave reads are performed in order of Slave + * number. If all slaves are enabled with more than zero bytes to be read, the + * order will be Slave 0, followed by Slave 1, Slave 2, and Slave 3. + * + * Each enabled slave will have EXT_SENS_DATA registers associated with it by + * number of bytes read (I2C_SLVx_LEN) in order of slave number, starting from + * EXT_SENS_DATA_00. Note that this means enabling or disabling a slave may + * change the higher numbered slaves' associated registers. Furthermore, if + * fewer total bytes are being read from the external sensors as a result of + * such a change, then the data remaining in the registers which no longer have + * an associated slave device (i.e. high numbered registers) will remain in + * these previously allocated registers unless reset. + * + * If the sum of the read lengths of all SLVx transactions exceed the number of + * available EXT_SENS_DATA registers, the excess bytes will be dropped. There + * are 24 EXT_SENS_DATA registers and hence the total read lengths between all + * the slaves cannot be greater than 24 or some bytes will be lost. + * + * Note: Slave 4's behavior is distinct from that of Slaves 0-3. For further + * information regarding the characteristics of Slave 4, please refer to + * Registers 49 to 53. + * + * EXAMPLE: + * Suppose that Slave 0 is enabled with 4 bytes to be read (I2C_SLV0_EN = 1 and + * I2C_SLV0_LEN = 4) while Slave 1 is enabled with 2 bytes to be read so that + * I2C_SLV1_EN = 1 and I2C_SLV1_LEN = 2. In such a situation, EXT_SENS_DATA _00 + * through _03 will be associated with Slave 0, while EXT_SENS_DATA _04 and 05 + * will be associated with Slave 1. If Slave 2 is enabled as well, registers + * starting from EXT_SENS_DATA_06 will be allocated to Slave 2. + * + * If Slave 2 is disabled while Slave 3 is enabled in this same situation, then + * registers starting from EXT_SENS_DATA_06 will be allocated to Slave 3 + * instead. + * + * REGISTER ALLOCATION FOR DYNAMIC DISABLE VS. NORMAL DISABLE: + * If a slave is disabled at any time, the space initially allocated to the + * slave in the EXT_SENS_DATA register, will remain associated with that slave. + * This is to avoid dynamic adjustment of the register allocation. + * + * The allocation of the EXT_SENS_DATA registers is recomputed only when (1) all + * slaves are disabled, or (2) the I2C_MST_RST bit is set (Register 106). + * + * This above is also true if one of the slaves gets NACKed and stops + * functioning. + * + * @param position Starting position (0-23) + * @return Byte read from register + */ +uint8_t MPU6050::getExternalSensorByte(int position) +{ + i2Cdev.readByte(devAddr, MPU6050_RA_EXT_SENS_DATA_00 + position, buffer); + return buffer[0]; +} +/** Read word (2 bytes) from external sensor data registers. + * @param position Starting position (0-21) + * @return Word read from register + * @see getExternalSensorByte() + */ +uint16_t MPU6050::getExternalSensorWord(int position) +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_EXT_SENS_DATA_00 + position, 2, buffer); + return (((uint16_t)buffer[0]) << 8) | buffer[1]; +} +/** Read double word (4 bytes) from external sensor data registers. + * @param position Starting position (0-20) + * @return Double word read from registers + * @see getExternalSensorByte() + */ +uint32_t MPU6050::getExternalSensorDWord(int position) +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_EXT_SENS_DATA_00 + position, 4, buffer); + return (((uint32_t)buffer[0]) << 24) | (((uint32_t)buffer[1]) << 16) | (((uint16_t)buffer[2]) << 8) | buffer[3]; +} + +// MOT_DETECT_STATUS register + +/** Get X-axis negative motion detection interrupt status. + * @return Motion detection status + * @see MPU6050_RA_MOT_DETECT_STATUS + * @see MPU6050_MOTION_MOT_XNEG_BIT + */ +bool MPU6050::getXNegMotionDetected() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_MOT_DETECT_STATUS, MPU6050_MOTION_MOT_XNEG_BIT, buffer); + return buffer[0]; +} +/** Get X-axis positive motion detection interrupt status. + * @return Motion detection status + * @see MPU6050_RA_MOT_DETECT_STATUS + * @see MPU6050_MOTION_MOT_XPOS_BIT + */ +bool MPU6050::getXPosMotionDetected() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_MOT_DETECT_STATUS, MPU6050_MOTION_MOT_XPOS_BIT, buffer); + return buffer[0]; +} +/** Get Y-axis negative motion detection interrupt status. + * @return Motion detection status + * @see MPU6050_RA_MOT_DETECT_STATUS + * @see MPU6050_MOTION_MOT_YNEG_BIT + */ +bool MPU6050::getYNegMotionDetected() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_MOT_DETECT_STATUS, MPU6050_MOTION_MOT_YNEG_BIT, buffer); + return buffer[0]; +} +/** Get Y-axis positive motion detection interrupt status. + * @return Motion detection status + * @see MPU6050_RA_MOT_DETECT_STATUS + * @see MPU6050_MOTION_MOT_YPOS_BIT + */ +bool MPU6050::getYPosMotionDetected() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_MOT_DETECT_STATUS, MPU6050_MOTION_MOT_YPOS_BIT, buffer); + return buffer[0]; +} +/** Get Z-axis negative motion detection interrupt status. + * @return Motion detection status + * @see MPU6050_RA_MOT_DETECT_STATUS + * @see MPU6050_MOTION_MOT_ZNEG_BIT + */ +bool MPU6050::getZNegMotionDetected() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_MOT_DETECT_STATUS, MPU6050_MOTION_MOT_ZNEG_BIT, buffer); + return buffer[0]; +} +/** Get Z-axis positive motion detection interrupt status. + * @return Motion detection status + * @see MPU6050_RA_MOT_DETECT_STATUS + * @see MPU6050_MOTION_MOT_ZPOS_BIT + */ +bool MPU6050::getZPosMotionDetected() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_MOT_DETECT_STATUS, MPU6050_MOTION_MOT_ZPOS_BIT, buffer); + return buffer[0]; +} +/** Get zero motion detection interrupt status. + * @return Motion detection status + * @see MPU6050_RA_MOT_DETECT_STATUS + * @see MPU6050_MOTION_MOT_ZRMOT_BIT + */ +bool MPU6050::getZeroMotionDetected() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_MOT_DETECT_STATUS, MPU6050_MOTION_MOT_ZRMOT_BIT, buffer); + return buffer[0]; +} + +// I2C_SLV*_DO register + +/** Write byte to Data Output container for specified slave. + * This register holds the output data written into Slave when Slave is set to + * write mode. For further information regarding Slave control, please + * refer to Registers 37 to 39 and immediately following. + * @param num Slave number (0-3) + * @param data Byte to write + * @see MPU6050_RA_I2C_SLV0_DO + */ +void MPU6050::setSlaveOutputByte(uint8_t num, uint8_t data) +{ + if (num > 3) return; + i2Cdev.writeByte(devAddr, MPU6050_RA_I2C_SLV0_DO + num, data); +} + +// I2C_MST_DELAY_CTRL register + +/** Get external data shadow delay enabled status. + * This register is used to specify the timing of external sensor data + * shadowing. When DELAY_ES_SHADOW is set to 1, shadowing of external + * sensor data is delayed until all data has been received. + * @return Current external data shadow delay enabled status. + * @see MPU6050_RA_I2C_MST_DELAY_CTRL + * @see MPU6050_DELAYCTRL_DELAY_ES_SHADOW_BIT + */ +bool MPU6050::getExternalShadowDelayEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_DELAY_CTRL, MPU6050_DELAYCTRL_DELAY_ES_SHADOW_BIT, buffer); + return buffer[0]; +} +/** Set external data shadow delay enabled status. + * @param enabled New external data shadow delay enabled status. + * @see getExternalShadowDelayEnabled() + * @see MPU6050_RA_I2C_MST_DELAY_CTRL + * @see MPU6050_DELAYCTRL_DELAY_ES_SHADOW_BIT + */ +void MPU6050::setExternalShadowDelayEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_MST_DELAY_CTRL, MPU6050_DELAYCTRL_DELAY_ES_SHADOW_BIT, enabled); +} +/** Get slave delay enabled status. + * When a particular slave delay is enabled, the rate of access for the that + * slave device is reduced. When a slave's access rate is decreased relative to + * the Sample Rate, the slave is accessed every: + * + * 1 / (1 + I2C_MST_DLY) Samples + * + * This base Sample Rate in turn is determined by SMPLRT_DIV (register * 25) + * and DLPF_CFG (register 26). + * + * For further information regarding I2C_MST_DLY, please refer to register 52. + * For further information regarding the Sample Rate, please refer to register 25. + * + * @param num Slave number (0-4) + * @return Current slave delay enabled status. + * @see MPU6050_RA_I2C_MST_DELAY_CTRL + * @see MPU6050_DELAYCTRL_I2C_SLV0_DLY_EN_BIT + */ +bool MPU6050::getSlaveDelayEnabled(uint8_t num) +{ + // MPU6050_DELAYCTRL_I2C_SLV4_DLY_EN_BIT is 4, SLV3 is 3, etc. + if (num > 4) return 0; + i2Cdev.readBit(devAddr, MPU6050_RA_I2C_MST_DELAY_CTRL, num, buffer); + return buffer[0]; +} +/** Set slave delay enabled status. + * @param num Slave number (0-4) + * @param enabled New slave delay enabled status. + * @see MPU6050_RA_I2C_MST_DELAY_CTRL + * @see MPU6050_DELAYCTRL_I2C_SLV0_DLY_EN_BIT + */ +void MPU6050::setSlaveDelayEnabled(uint8_t num, bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_I2C_MST_DELAY_CTRL, num, enabled); +} + +// SIGNAL_PATH_RESET register + +/** Reset gyroscope signal path. + * The reset will revert the signal path analog to digital converters and + * filters to their power up configurations. + * @see MPU6050_RA_SIGNAL_PATH_RESET + * @see MPU6050_PATHRESET_GYRO_RESET_BIT + */ +void MPU6050::resetGyroscopePath() +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_SIGNAL_PATH_RESET, MPU6050_PATHRESET_GYRO_RESET_BIT, true); +} +/** Reset accelerometer signal path. + * The reset will revert the signal path analog to digital converters and + * filters to their power up configurations. + * @see MPU6050_RA_SIGNAL_PATH_RESET + * @see MPU6050_PATHRESET_ACCEL_RESET_BIT + */ +void MPU6050::resetAccelerometerPath() +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_SIGNAL_PATH_RESET, MPU6050_PATHRESET_ACCEL_RESET_BIT, true); +} +/** Reset temperature sensor signal path. + * The reset will revert the signal path analog to digital converters and + * filters to their power up configurations. + * @see MPU6050_RA_SIGNAL_PATH_RESET + * @see MPU6050_PATHRESET_TEMP_RESET_BIT + */ +void MPU6050::resetTemperaturePath() +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_SIGNAL_PATH_RESET, MPU6050_PATHRESET_TEMP_RESET_BIT, true); +} + +// MOT_DETECT_CTRL register + +/** Get accelerometer power-on delay. + * The accelerometer data path provides samples to the sensor registers, Motion + * detection, Zero Motion detection, and Free Fall detection modules. The + * signal path contains filters which must be flushed on wake-up with new + * samples before the detection modules begin operations. The default wake-up + * delay, of 4ms can be lengthened by up to 3ms. This additional delay is + * specified in ACCEL_ON_DELAY in units of 1 LSB = 1 ms. The user may select + * any value above zero unless instructed otherwise by InvenSense. Please refer + * to Section 8 of the MPU-6000/MPU-6050 Product Specification document for + * further information regarding the detection modules. + * @return Current accelerometer power-on delay + * @see MPU6050_RA_MOT_DETECT_CTRL + * @see MPU6050_DETECT_ACCEL_ON_DELAY_BIT + */ +uint8_t MPU6050::getAccelerometerPowerOnDelay() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_MOT_DETECT_CTRL, MPU6050_DETECT_ACCEL_ON_DELAY_BIT, MPU6050_DETECT_ACCEL_ON_DELAY_LENGTH, buffer); + return buffer[0]; +} +/** Set accelerometer power-on delay. + * @param delay New accelerometer power-on delay (0-3) + * @see getAccelerometerPowerOnDelay() + * @see MPU6050_RA_MOT_DETECT_CTRL + * @see MPU6050_DETECT_ACCEL_ON_DELAY_BIT + */ +void MPU6050::setAccelerometerPowerOnDelay(uint8_t delay) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_MOT_DETECT_CTRL, MPU6050_DETECT_ACCEL_ON_DELAY_BIT, MPU6050_DETECT_ACCEL_ON_DELAY_LENGTH, delay); +} +/** Get Free Fall detection counter decrement configuration. + * Detection is registered by the Free Fall detection module after accelerometer + * measurements meet their respective threshold conditions over a specified + * number of samples. When the threshold conditions are met, the corresponding + * detection counter increments by 1. The user may control the rate at which the + * detection counter decrements when the threshold condition is not met by + * configuring FF_COUNT. The decrement rate can be set according to the + * following table: + * + * <pre> + * FF_COUNT | Counter Decrement + * ---------+------------------ + * 0 | Reset + * 1 | 1 + * 2 | 2 + * 3 | 4 + * </pre> + * + * When FF_COUNT is configured to 0 (reset), any non-qualifying sample will + * reset the counter to 0. For further information on Free Fall detection, + * please refer to Registers 29 to 32. + * + * @return Current decrement configuration + * @see MPU6050_RA_MOT_DETECT_CTRL + * @see MPU6050_DETECT_FF_COUNT_BIT + */ +uint8_t MPU6050::getFreefallDetectionCounterDecrement() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_MOT_DETECT_CTRL, MPU6050_DETECT_FF_COUNT_BIT, MPU6050_DETECT_FF_COUNT_LENGTH, buffer); + return buffer[0]; +} +/** Set Free Fall detection counter decrement configuration. + * @param decrement New decrement configuration value + * @see getFreefallDetectionCounterDecrement() + * @see MPU6050_RA_MOT_DETECT_CTRL + * @see MPU6050_DETECT_FF_COUNT_BIT + */ +void MPU6050::setFreefallDetectionCounterDecrement(uint8_t decrement) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_MOT_DETECT_CTRL, MPU6050_DETECT_FF_COUNT_BIT, MPU6050_DETECT_FF_COUNT_LENGTH, decrement); +} +/** Get Motion detection counter decrement configuration. + * Detection is registered by the Motion detection module after accelerometer + * measurements meet their respective threshold conditions over a specified + * number of samples. When the threshold conditions are met, the corresponding + * detection counter increments by 1. The user may control the rate at which the + * detection counter decrements when the threshold condition is not met by + * configuring MOT_COUNT. The decrement rate can be set according to the + * following table: + * + * <pre> + * MOT_COUNT | Counter Decrement + * ----------+------------------ + * 0 | Reset + * 1 | 1 + * 2 | 2 + * 3 | 4 + * </pre> + * + * When MOT_COUNT is configured to 0 (reset), any non-qualifying sample will + * reset the counter to 0. For further information on Motion detection, + * please refer to Registers 29 to 32. + * + */ +uint8_t MPU6050::getMotionDetectionCounterDecrement() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_MOT_DETECT_CTRL, MPU6050_DETECT_MOT_COUNT_BIT, MPU6050_DETECT_MOT_COUNT_LENGTH, buffer); + return buffer[0]; +} +/** Set Motion detection counter decrement configuration. + * @param decrement New decrement configuration value + * @see getMotionDetectionCounterDecrement() + * @see MPU6050_RA_MOT_DETECT_CTRL + * @see MPU6050_DETECT_MOT_COUNT_BIT + */ +void MPU6050::setMotionDetectionCounterDecrement(uint8_t decrement) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_MOT_DETECT_CTRL, MPU6050_DETECT_MOT_COUNT_BIT, MPU6050_DETECT_MOT_COUNT_LENGTH, decrement); +} + +// USER_CTRL register + +/** Get FIFO enabled status. + * When this bit is set to 0, the FIFO buffer is disabled. The FIFO buffer + * cannot be written to or read from while disabled. The FIFO buffer's state + * does not change unless the MPU-60X0 is power cycled. + * @return Current FIFO enabled status + * @see MPU6050_RA_USER_CTRL + * @see MPU6050_USERCTRL_FIFO_EN_BIT + */ +bool MPU6050::getFIFOEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_FIFO_EN_BIT, buffer); + return buffer[0]; +} +/** Set FIFO enabled status. + * @param enabled New FIFO enabled status + * @see getFIFOEnabled() + * @see MPU6050_RA_USER_CTRL + * @see MPU6050_USERCTRL_FIFO_EN_BIT + */ +void MPU6050::setFIFOEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_FIFO_EN_BIT, enabled); +} +/** Get I2C Master Mode enabled status. + * When this mode is enabled, the MPU-60X0 acts as the I2C Master to the + * external sensor slave devices on the auxiliary I2C bus. When this bit is + * cleared to 0, the auxiliary I2C bus lines (AUX_DA and AUX_CL) are logically + * driven by the primary I2C bus (SDA and SCL). This is a precondition to + * enabling Bypass Mode. For further information regarding Bypass Mode, please + * refer to Register 55. + * @return Current I2C Master Mode enabled status + * @see MPU6050_RA_USER_CTRL + * @see MPU6050_USERCTRL_I2C_MST_EN_BIT + */ +bool MPU6050::getI2CMasterModeEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_I2C_MST_EN_BIT, buffer); + return buffer[0]; +} +/** Set I2C Master Mode enabled status. + * @param enabled New I2C Master Mode enabled status + * @see getI2CMasterModeEnabled() + * @see MPU6050_RA_USER_CTRL + * @see MPU6050_USERCTRL_I2C_MST_EN_BIT + */ +void MPU6050::setI2CMasterModeEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_I2C_MST_EN_BIT, enabled); +} +/** Switch from I2C to SPI mode (MPU-6000 only) + * If this is set, the primary SPI interface will be enabled in place of the + * disabled primary I2C interface. + */ +void MPU6050::switchSPIEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_I2C_IF_DIS_BIT, enabled); +} +/** Reset the FIFO. + * This bit resets the FIFO buffer when set to 1 while FIFO_EN equals 0. This + * bit automatically clears to 0 after the reset has been triggered. + * @see MPU6050_RA_USER_CTRL + * @see MPU6050_USERCTRL_FIFO_RESET_BIT + */ +void MPU6050::resetFIFO() +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_FIFO_RESET_BIT, true); +} +/** Reset the I2C Master. + * This bit resets the I2C Master when set to 1 while I2C_MST_EN equals 0. + * This bit automatically clears to 0 after the reset has been triggered. + * @see MPU6050_RA_USER_CTRL + * @see MPU6050_USERCTRL_I2C_MST_RESET_BIT + */ +void MPU6050::resetI2CMaster() +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_I2C_MST_RESET_BIT, true); +} +/** Reset all sensor registers and signal paths. + * When set to 1, this bit resets the signal paths for all sensors (gyroscopes, + * accelerometers, and temperature sensor). This operation will also clear the + * sensor registers. This bit automatically clears to 0 after the reset has been + * triggered. + * + * When resetting only the signal path (and not the sensor registers), please + * use Register 104, SIGNAL_PATH_RESET. + * + * @see MPU6050_RA_USER_CTRL + * @see MPU6050_USERCTRL_SIG_COND_RESET_BIT + */ +void MPU6050::resetSensors() +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_SIG_COND_RESET_BIT, true); +} + +// PWR_MGMT_1 register + +/** Trigger a full device reset. + * A small delay of ~50ms may be desirable after triggering a reset. + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_DEVICE_RESET_BIT + */ +void MPU6050::reset() +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_DEVICE_RESET_BIT, true); +} +/** Get sleep mode status. + * Setting the SLEEP bit in the register puts the device into very low power + * sleep mode. In this mode, only the serial interface and internal registers + * remain active, allowing for a very low standby current. Clearing this bit + * puts the device back into normal mode. To save power, the individual standby + * selections for each of the gyros should be used if any gyro axis is not used + * by the application. + * @return Current sleep mode enabled status + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_SLEEP_BIT + */ +bool MPU6050::getSleepEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_SLEEP_BIT, buffer); + return buffer[0]; +} +/** Set sleep mode status. + * @param enabled New sleep mode enabled status + * @see getSleepEnabled() + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_SLEEP_BIT + */ +void MPU6050::setSleepEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_SLEEP_BIT, enabled); +} +/** Get wake cycle enabled status. + * When this bit is set to 1 and SLEEP is disabled, the MPU-60X0 will cycle + * between sleep mode and waking up to take a single sample of data from active + * sensors at a rate determined by LP_WAKE_CTRL (register 108). + * @return Current sleep mode enabled status + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_CYCLE_BIT + */ +bool MPU6050::getWakeCycleEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_CYCLE_BIT, buffer); + return buffer[0]; +} +/** Set wake cycle enabled status. + * @param enabled New sleep mode enabled status + * @see getWakeCycleEnabled() + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_CYCLE_BIT + */ +void MPU6050::setWakeCycleEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_CYCLE_BIT, enabled); +} +/** Get temperature sensor enabled status. + * Control the usage of the internal temperature sensor. + * + * Note: this register stores the *disabled* value, but for consistency with the + * rest of the code, the function is named and used with standard true/false + * values to indicate whether the sensor is enabled or disabled, respectively. + * + * @return Current temperature sensor enabled status + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_TEMP_DIS_BIT + */ +bool MPU6050::getTempSensorEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_TEMP_DIS_BIT, buffer); + return buffer[0] == 0; // 1 is actually disabled here +} +/** Set temperature sensor enabled status. + * Note: this register stores the *disabled* value, but for consistency with the + * rest of the code, the function is named and used with standard true/false + * values to indicate whether the sensor is enabled or disabled, respectively. + * + * @param enabled New temperature sensor enabled status + * @see getTempSensorEnabled() + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_TEMP_DIS_BIT + */ +void MPU6050::setTempSensorEnabled(bool enabled) +{ + // 1 is actually disabled here + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_TEMP_DIS_BIT, !enabled); +} +/** Get clock source setting. + * @return Current clock source setting + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_CLKSEL_BIT + * @see MPU6050_PWR1_CLKSEL_LENGTH + */ +uint8_t MPU6050::getClockSource() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_CLKSEL_BIT, MPU6050_PWR1_CLKSEL_LENGTH, buffer); + return buffer[0]; +} +/** Set clock source setting. + * An internal 8MHz oscillator, gyroscope based clock, or external sources can + * be selected as the MPU-60X0 clock source. When the internal 8 MHz oscillator + * or an external source is chosen as the clock source, the MPU-60X0 can operate + * in low power modes with the gyroscopes disabled. + * + * Upon power up, the MPU-60X0 clock source defaults to the internal oscillator. + * However, it is highly recommended that the device be configured to use one of + * the gyroscopes (or an external clock source) as the clock reference for + * improved stability. The clock source can be selected according to the following table: + * + * <pre> + * CLK_SEL | Clock Source + * --------+-------------------------------------- + * 0 | Internal oscillator + * 1 | PLL with X Gyro reference + * 2 | PLL with Y Gyro reference + * 3 | PLL with Z Gyro reference + * 4 | PLL with external 32.768kHz reference + * 5 | PLL with external 19.2MHz reference + * 6 | Reserved + * 7 | Stops the clock and keeps the timing generator in reset + * </pre> + * + * @param source New clock source setting + * @see getClockSource() + * @see MPU6050_RA_PWR_MGMT_1 + * @see MPU6050_PWR1_CLKSEL_BIT + * @see MPU6050_PWR1_CLKSEL_LENGTH + */ +void MPU6050::setClockSource(uint8_t source) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_CLKSEL_BIT, MPU6050_PWR1_CLKSEL_LENGTH, source); +} + +// PWR_MGMT_2 register + +/** Get wake frequency in Accel-Only Low Power Mode. + * The MPU-60X0 can be put into Accerlerometer Only Low Power Mode by setting + * PWRSEL to 1 in the Power Management 1 register (Register 107). In this mode, + * the device will power off all devices except for the primary I2C interface, + * waking only the accelerometer at fixed intervals to take a single + * measurement. The frequency of wake-ups can be configured with LP_WAKE_CTRL + * as shown below: + * + * <pre> + * LP_WAKE_CTRL | Wake-up Frequency + * -------------+------------------ + * 0 | 1.25 Hz + * 1 | 2.5 Hz + * 2 | 5 Hz + * 3 | 10 Hz + * <pre> + * + * For further information regarding the MPU-60X0's power modes, please refer to + * Register 107. + * + * @return Current wake frequency + * @see MPU6050_RA_PWR_MGMT_2 + */ +uint8_t MPU6050::getWakeFrequency() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_LP_WAKE_CTRL_BIT, MPU6050_PWR2_LP_WAKE_CTRL_LENGTH, buffer); + return buffer[0]; +} +/** Set wake frequency in Accel-Only Low Power Mode. + * @param frequency New wake frequency + * @see MPU6050_RA_PWR_MGMT_2 + */ +void MPU6050::setWakeFrequency(uint8_t frequency) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_LP_WAKE_CTRL_BIT, MPU6050_PWR2_LP_WAKE_CTRL_LENGTH, frequency); +} + +/** Get X-axis accelerometer standby enabled status. + * If enabled, the X-axis will not gather or report data (or use power). + * @return Current X-axis standby enabled status + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_XA_BIT + */ +bool MPU6050::getStandbyXAccelEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_XA_BIT, buffer); + return buffer[0]; +} +/** Set X-axis accelerometer standby enabled status. + * @param New X-axis standby enabled status + * @see getStandbyXAccelEnabled() + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_XA_BIT + */ +void MPU6050::setStandbyXAccelEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_XA_BIT, enabled); +} +/** Get Y-axis accelerometer standby enabled status. + * If enabled, the Y-axis will not gather or report data (or use power). + * @return Current Y-axis standby enabled status + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_YA_BIT + */ +bool MPU6050::getStandbyYAccelEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_YA_BIT, buffer); + return buffer[0]; +} +/** Set Y-axis accelerometer standby enabled status. + * @param New Y-axis standby enabled status + * @see getStandbyYAccelEnabled() + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_YA_BIT + */ +void MPU6050::setStandbyYAccelEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_YA_BIT, enabled); +} +/** Get Z-axis accelerometer standby enabled status. + * If enabled, the Z-axis will not gather or report data (or use power). + * @return Current Z-axis standby enabled status + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_ZA_BIT + */ +bool MPU6050::getStandbyZAccelEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_ZA_BIT, buffer); + return buffer[0]; +} +/** Set Z-axis accelerometer standby enabled status. + * @param New Z-axis standby enabled status + * @see getStandbyZAccelEnabled() + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_ZA_BIT + */ +void MPU6050::setStandbyZAccelEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_ZA_BIT, enabled); +} +/** Get X-axis gyroscope standby enabled status. + * If enabled, the X-axis will not gather or report data (or use power). + * @return Current X-axis standby enabled status + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_XG_BIT + */ +bool MPU6050::getStandbyXGyroEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_XG_BIT, buffer); + return buffer[0]; +} +/** Set X-axis gyroscope standby enabled status. + * @param New X-axis standby enabled status + * @see getStandbyXGyroEnabled() + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_XG_BIT + */ +void MPU6050::setStandbyXGyroEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_XG_BIT, enabled); +} +/** Get Y-axis gyroscope standby enabled status. + * If enabled, the Y-axis will not gather or report data (or use power). + * @return Current Y-axis standby enabled status + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_YG_BIT + */ +bool MPU6050::getStandbyYGyroEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_YG_BIT, buffer); + return buffer[0]; +} +/** Set Y-axis gyroscope standby enabled status. + * @param New Y-axis standby enabled status + * @see getStandbyYGyroEnabled() + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_YG_BIT + */ +void MPU6050::setStandbyYGyroEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_YG_BIT, enabled); +} +/** Get Z-axis gyroscope standby enabled status. + * If enabled, the Z-axis will not gather or report data (or use power). + * @return Current Z-axis standby enabled status + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_ZG_BIT + */ +bool MPU6050::getStandbyZGyroEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_ZG_BIT, buffer); + return buffer[0]; +} +/** Set Z-axis gyroscope standby enabled status. + * @param New Z-axis standby enabled status + * @see getStandbyZGyroEnabled() + * @see MPU6050_RA_PWR_MGMT_2 + * @see MPU6050_PWR2_STBY_ZG_BIT + */ +void MPU6050::setStandbyZGyroEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_PWR_MGMT_2, MPU6050_PWR2_STBY_ZG_BIT, enabled); +} + +// FIFO_COUNT* registers + +/** Get current FIFO buffer size. + * This value indicates the number of bytes stored in the FIFO buffer. This + * number is in turn the number of bytes that can be read from the FIFO buffer + * and it is directly proportional to the number of samples available given the + * set of sensor data bound to be stored in the FIFO (register 35 and 36). + * @return Current FIFO buffer size + */ +uint16_t MPU6050::getFIFOCount() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_FIFO_COUNTH, 2, buffer); + return (((uint16_t)buffer[0]) << 8) | buffer[1]; +} + +// FIFO_R_W register + +/** Get byte from FIFO buffer. + * This register is used to read and write data from the FIFO buffer. Data is + * written to the FIFO in order of register number (from lowest to highest). If + * all the FIFO enable flags (see below) are enabled and all External Sensor + * Data registers (Registers 73 to 96) are associated with a Slave device, the + * contents of registers 59 through 96 will be written in order at the Sample + * Rate. + * + * The contents of the sensor data registers (Registers 59 to 96) are written + * into the FIFO buffer when their corresponding FIFO enable flags are set to 1 + * in FIFO_EN (Register 35). An additional flag for the sensor data registers + * associated with I2C Slave 3 can be found in I2C_MST_CTRL (Register 36). + * + * If the FIFO buffer has overflowed, the status bit FIFO_OFLOW_INT is + * automatically set to 1. This bit is located in INT_STATUS (Register 58). + * When the FIFO buffer has overflowed, the oldest data will be lost and new + * data will be written to the FIFO. + * + * If the FIFO buffer is empty, reading this register will return the last byte + * that was previously read from the FIFO until new data is available. The user + * should check FIFO_COUNT to ensure that the FIFO buffer is not read when + * empty. + * + * @return Byte from FIFO buffer + */ +uint8_t MPU6050::getFIFOByte() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_FIFO_R_W, buffer); + return buffer[0]; +} +void MPU6050::getFIFOBytes(uint8_t *data, uint8_t length) +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_FIFO_R_W, length, data); +} +/** Write byte to FIFO buffer. + * @see getFIFOByte() + * @see MPU6050_RA_FIFO_R_W + */ +void MPU6050::setFIFOByte(uint8_t data) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_FIFO_R_W, data); +} + +// WHO_AM_I register + +/** Get Device ID. + * This register is used to verify the identity of the device (0b110100, 0x34). + * @return Device ID (6 bits only! should be 0x34) + * @see MPU6050_RA_WHO_AM_I + * @see MPU6050_WHO_AM_I_BIT + * @see MPU6050_WHO_AM_I_LENGTH + */ +uint8_t MPU6050::getDeviceID() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_WHO_AM_I, MPU6050_WHO_AM_I_BIT, MPU6050_WHO_AM_I_LENGTH, buffer); + return buffer[0]; +} +/** Set Device ID. + * Write a new ID into the WHO_AM_I register (no idea why this should ever be + * necessary though). + * @param id New device ID to set. + * @see getDeviceID() + * @see MPU6050_RA_WHO_AM_I + * @see MPU6050_WHO_AM_I_BIT + * @see MPU6050_WHO_AM_I_LENGTH + */ +void MPU6050::setDeviceID(uint8_t id) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_WHO_AM_I, MPU6050_WHO_AM_I_BIT, MPU6050_WHO_AM_I_LENGTH, id); +} + +// ======== UNDOCUMENTED/DMP REGISTERS/METHODS ======== + +// XG_OFFS_TC register + +uint8_t MPU6050::getOTPBankValid() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_XG_OFFS_TC, MPU6050_TC_OTP_BNK_VLD_BIT, buffer); + return buffer[0]; +} +void MPU6050::setOTPBankValid(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_XG_OFFS_TC, MPU6050_TC_OTP_BNK_VLD_BIT, enabled); +} +int8_t MPU6050::getXGyroOffset() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_XG_OFFS_TC, MPU6050_TC_OFFSET_BIT, MPU6050_TC_OFFSET_LENGTH, buffer); + return buffer[0]; +} +void MPU6050::setXGyroOffset(int8_t offset) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_XG_OFFS_TC, MPU6050_TC_OFFSET_BIT, MPU6050_TC_OFFSET_LENGTH, offset); +} + +// YG_OFFS_TC register + +int8_t MPU6050::getYGyroOffset() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_YG_OFFS_TC, MPU6050_TC_OFFSET_BIT, MPU6050_TC_OFFSET_LENGTH, buffer); + return buffer[0]; +} +void MPU6050::setYGyroOffset(int8_t offset) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_YG_OFFS_TC, MPU6050_TC_OFFSET_BIT, MPU6050_TC_OFFSET_LENGTH, offset); +} + +// ZG_OFFS_TC register + +int8_t MPU6050::getZGyroOffset() +{ + i2Cdev.readBits(devAddr, MPU6050_RA_ZG_OFFS_TC, MPU6050_TC_OFFSET_BIT, MPU6050_TC_OFFSET_LENGTH, buffer); + return buffer[0]; +} +void MPU6050::setZGyroOffset(int8_t offset) +{ + i2Cdev.writeBits(devAddr, MPU6050_RA_ZG_OFFS_TC, MPU6050_TC_OFFSET_BIT, MPU6050_TC_OFFSET_LENGTH, offset); +} + +// X_FINE_GAIN register + +int8_t MPU6050::getXFineGain() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_X_FINE_GAIN, buffer); + return buffer[0]; +} +void MPU6050::setXFineGain(int8_t gain) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_X_FINE_GAIN, gain); +} + +// Y_FINE_GAIN register + +int8_t MPU6050::getYFineGain() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_Y_FINE_GAIN, buffer); + return buffer[0]; +} +void MPU6050::setYFineGain(int8_t gain) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_Y_FINE_GAIN, gain); +} + +// Z_FINE_GAIN register + +int8_t MPU6050::getZFineGain() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_Z_FINE_GAIN, buffer); + return buffer[0]; +} +void MPU6050::setZFineGain(int8_t gain) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_Z_FINE_GAIN, gain); +} + +// XA_OFFS_* registers + +int16_t MPU6050::getXAccelOffset() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_XA_OFFS_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +void MPU6050::setXAccelOffset(int16_t offset) +{ + i2Cdev.writeWord(devAddr, MPU6050_RA_XA_OFFS_H, offset); +} + +// YA_OFFS_* register + +int16_t MPU6050::getYAccelOffset() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_YA_OFFS_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +void MPU6050::setYAccelOffset(int16_t offset) +{ + i2Cdev.writeWord(devAddr, MPU6050_RA_YA_OFFS_H, offset); +} + +// ZA_OFFS_* register + +int16_t MPU6050::getZAccelOffset() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_ZA_OFFS_H, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +void MPU6050::setZAccelOffset(int16_t offset) +{ + i2Cdev.writeWord(devAddr, MPU6050_RA_ZA_OFFS_H, offset); +} + +// XG_OFFS_USR* registers + +int16_t MPU6050::getXGyroOffsetUser() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_XG_OFFS_USRH, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +void MPU6050::setXGyroOffsetUser(int16_t offset) +{ + i2Cdev.writeWord(devAddr, MPU6050_RA_XG_OFFS_USRH, offset); +} + +// YG_OFFS_USR* register + +int16_t MPU6050::getYGyroOffsetUser() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_YG_OFFS_USRH, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +void MPU6050::setYGyroOffsetUser(int16_t offset) +{ + i2Cdev.writeWord(devAddr, MPU6050_RA_YG_OFFS_USRH, offset); +} + +// ZG_OFFS_USR* register + +int16_t MPU6050::getZGyroOffsetUser() +{ + i2Cdev.readBytes(devAddr, MPU6050_RA_ZG_OFFS_USRH, 2, buffer); + return (((int16_t)buffer[0]) << 8) | buffer[1]; +} +void MPU6050::setZGyroOffsetUser(int16_t offset) +{ + i2Cdev.writeWord(devAddr, MPU6050_RA_ZG_OFFS_USRH, offset); +} + +// INT_ENABLE register (DMP functions) + +bool MPU6050::getIntPLLReadyEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_PLL_RDY_INT_BIT, buffer); + return buffer[0]; +} +void MPU6050::setIntPLLReadyEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_PLL_RDY_INT_BIT, enabled); +} +bool MPU6050::getIntDMPEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_DMP_INT_BIT, buffer); + return buffer[0]; +} +void MPU6050::setIntDMPEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_INT_ENABLE, MPU6050_INTERRUPT_DMP_INT_BIT, enabled); +} + +// DMP_INT_STATUS + +bool MPU6050::getDMPInt5Status() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_DMP_INT_STATUS, MPU6050_DMPINT_5_BIT, buffer); + return buffer[0]; +} +bool MPU6050::getDMPInt4Status() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_DMP_INT_STATUS, MPU6050_DMPINT_4_BIT, buffer); + return buffer[0]; +} +bool MPU6050::getDMPInt3Status() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_DMP_INT_STATUS, MPU6050_DMPINT_3_BIT, buffer); + return buffer[0]; +} +bool MPU6050::getDMPInt2Status() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_DMP_INT_STATUS, MPU6050_DMPINT_2_BIT, buffer); + return buffer[0]; +} +bool MPU6050::getDMPInt1Status() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_DMP_INT_STATUS, MPU6050_DMPINT_1_BIT, buffer); + return buffer[0]; +} +bool MPU6050::getDMPInt0Status() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_DMP_INT_STATUS, MPU6050_DMPINT_0_BIT, buffer); + return buffer[0]; +} + +// INT_STATUS register (DMP functions) + +bool MPU6050::getIntPLLReadyStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_STATUS, MPU6050_INTERRUPT_PLL_RDY_INT_BIT, buffer); + return buffer[0]; +} +bool MPU6050::getIntDMPStatus() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_INT_STATUS, MPU6050_INTERRUPT_DMP_INT_BIT, buffer); + return buffer[0]; +} + +// USER_CTRL register (DMP functions) + +bool MPU6050::getDMPEnabled() +{ + i2Cdev.readBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_DMP_EN_BIT, buffer); + return buffer[0]; +} +void MPU6050::setDMPEnabled(bool enabled) +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_DMP_EN_BIT, enabled); +} +void MPU6050::resetDMP() +{ + i2Cdev.writeBit(devAddr, MPU6050_RA_USER_CTRL, MPU6050_USERCTRL_DMP_RESET_BIT, true); +} + +// BANK_SEL register + +void MPU6050::setMemoryBank(uint8_t bank, bool prefetchEnabled, bool userBank) +{ + bank &= 0x1F; + if (userBank) bank |= 0x20; + if (prefetchEnabled) bank |= 0x40; + i2Cdev.writeByte(devAddr, MPU6050_RA_BANK_SEL, bank); +} + +// MEM_START_ADDR register + +void MPU6050::setMemoryStartAddress(uint8_t address) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_MEM_START_ADDR, address); +} + +// MEM_R_W register + +uint8_t MPU6050::readMemoryByte() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_MEM_R_W, buffer); + return buffer[0]; +} +void MPU6050::writeMemoryByte(uint8_t data) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_MEM_R_W, data); +} +void MPU6050::readMemoryBlock(uint8_t *data, uint16_t dataSize, uint8_t bank, uint8_t address) +{ + setMemoryBank(bank); + setMemoryStartAddress(address); + uint8_t chunkSize; + for (uint16_t i = 0; i < dataSize;) { + // determine correct chunk size according to bank position and data size + chunkSize = MPU6050_DMP_MEMORY_CHUNK_SIZE; + + // make sure we don't go past the data size + if (i + chunkSize > dataSize) chunkSize = dataSize - i; + + // make sure this chunk doesn't go past the bank boundary (256 bytes) + if (chunkSize > 256 - address) chunkSize = 256 - address; + + // read the chunk of data as specified + i2Cdev.readBytes(devAddr, MPU6050_RA_MEM_R_W, chunkSize, data + i); + + // increase byte index by [chunkSize] + i += chunkSize; + + // uint8_t automatically wraps to 0 at 256 + address += chunkSize; + + // if we aren't done, update bank (if necessary) and address + if (i < dataSize) { + if (address == 0) bank++; + setMemoryBank(bank); + setMemoryStartAddress(address); + } + } +} +bool MPU6050::writeMemoryBlock(const uint8_t *data, uint16_t dataSize, uint8_t bank, uint8_t address, bool verify, bool useProgMem) +{ + setMemoryBank(bank); + setMemoryStartAddress(address); + uint8_t chunkSize; + uint8_t *verifyBuffer; + uint8_t *progBuffer; + uint16_t i; + uint8_t j; + if (verify) verifyBuffer = (uint8_t *)malloc(MPU6050_DMP_MEMORY_CHUNK_SIZE); + if (useProgMem) progBuffer = (uint8_t *)malloc(MPU6050_DMP_MEMORY_CHUNK_SIZE); + for (i = 0; i < dataSize;) { + // determine correct chunk size according to bank position and data size + chunkSize = MPU6050_DMP_MEMORY_CHUNK_SIZE; + + // make sure we don't go past the data size + if (i + chunkSize > dataSize) chunkSize = dataSize - i; + + // make sure this chunk doesn't go past the bank boundary (256 bytes) + if (chunkSize > 256 - address) chunkSize = 256 - address; + + if (useProgMem) { + // write the chunk of data as specified + for (j = 0; j < chunkSize; j++) progBuffer[j] = pgm_read_byte(data + i + j); + } else { + // write the chunk of data as specified + progBuffer = (uint8_t *)data + i; + } + + i2Cdev.writeBytes(devAddr, MPU6050_RA_MEM_R_W, chunkSize, progBuffer); + + // verify data if needed + if (verify && verifyBuffer) { + setMemoryBank(bank); + setMemoryStartAddress(address); + i2Cdev.readBytes(devAddr, MPU6050_RA_MEM_R_W, chunkSize, verifyBuffer); + if (memcmp(progBuffer, verifyBuffer, chunkSize) != 0) { + /*Serial.print("Block write verification error, bank "); + Serial.print(bank, DEC); + Serial.print(", address "); + Serial.print(address, DEC); + Serial.print("!\nExpected:"); + for (j = 0; j < chunkSize; j++) { + Serial.print(" 0x"); + if (progBuffer[j] < 16) Serial.print("0"); + Serial.print(progBuffer[j], HEX); + } + Serial.print("\nReceived:"); + for (uint8_t j = 0; j < chunkSize; j++) { + Serial.print(" 0x"); + if (verifyBuffer[i + j] < 16) Serial.print("0"); + Serial.print(verifyBuffer[i + j], HEX); + } + Serial.print("\n");*/ + free(verifyBuffer); + if (useProgMem) free(progBuffer); + return false; // uh oh. + } + } + + // increase byte index by [chunkSize] + i += chunkSize; + + // uint8_t automatically wraps to 0 at 256 + address += chunkSize; + + // if we aren't done, update bank (if necessary) and address + if (i < dataSize) { + if (address == 0) bank++; + setMemoryBank(bank); + setMemoryStartAddress(address); + } + } + if (verify) free(verifyBuffer); + if (useProgMem) free(progBuffer); + return true; +} +bool MPU6050::writeProgMemoryBlock(const uint8_t *data, uint16_t dataSize, uint8_t bank, uint8_t address, bool verify) +{ + return writeMemoryBlock(data, dataSize, bank, address, verify, true); +} +bool MPU6050::writeDMPConfigurationSet(const uint8_t *data, uint16_t dataSize, bool useProgMem) +{ + uint8_t *progBuffer, success, special; + uint16_t i, j; + if (useProgMem) { + progBuffer = (uint8_t *)malloc(8); // assume 8-byte blocks, realloc later if necessary + } + + // config set data is a long string of blocks with the following structure: + // [bank] [offset] [length] [byte[0], byte[1], ..., byte[length]] + uint8_t bank, offset, length; + for (i = 0; i < dataSize;) { + if (useProgMem) { + bank = pgm_read_byte(data + i++); + offset = pgm_read_byte(data + i++); + length = pgm_read_byte(data + i++); + } else { + bank = data[i++]; + offset = data[i++]; + length = data[i++]; + } + + // write data or perform special action + if (length > 0) { + // regular block of data to write + /*Serial.print("Writing config block to bank "); + Serial.print(bank); + Serial.print(", offset "); + Serial.print(offset); + Serial.print(", length="); + Serial.println(length);*/ + if (useProgMem) { + if (sizeof(progBuffer) < length) progBuffer = (uint8_t *)realloc(progBuffer, length); + for (j = 0; j < length; j++) progBuffer[j] = pgm_read_byte(data + i + j); + } else { + progBuffer = (uint8_t *)data + i; + } + success = writeMemoryBlock(progBuffer, length, bank, offset, true); + i += length; + } else { + // special instruction + // NOTE: this kind of behavior (what and when to do certain things) + // is totally undocumented. This code is in here based on observed + // behavior only, and exactly why (or even whether) it has to be here + // is anybody's guess for now. + if (useProgMem) { + special = pgm_read_byte(data + i++); + } else { + special = data[i++]; + } + /*Serial.print("Special command code "); + Serial.print(special, HEX); + Serial.println(" found...");*/ + if (special == 0x01) { + // enable DMP-related interrupts + + //setIntZeroMotionEnabled(true); + //setIntFIFOBufferOverflowEnabled(true); + //setIntDMPEnabled(true); + i2Cdev.writeByte(devAddr, MPU6050_RA_INT_ENABLE, 0x32); // single operation + + success = true; + } else { + // unknown special command + success = false; + } + } + + if (!success) { + if (useProgMem) free(progBuffer); + return false; // uh oh + } + } + if (useProgMem) free(progBuffer); + return true; +} +bool MPU6050::writeProgDMPConfigurationSet(const uint8_t *data, uint16_t dataSize) +{ + return writeDMPConfigurationSet(data, dataSize, false); +} + +// DMP_CFG_1 register + +uint8_t MPU6050::getDMPConfig1() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_DMP_CFG_1, buffer); + return buffer[0]; +} +void MPU6050::setDMPConfig1(uint8_t config) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_DMP_CFG_1, config); +} + +// DMP_CFG_2 register + +uint8_t MPU6050::getDMPConfig2() +{ + i2Cdev.readByte(devAddr, MPU6050_RA_DMP_CFG_2, buffer); + return buffer[0]; +} +void MPU6050::setDMPConfig2(uint8_t config) +{ + i2Cdev.writeByte(devAddr, MPU6050_RA_DMP_CFG_2, config); +} \ No newline at end of file