TextLCD - add UTF-8 recode support, Cyrilic rus/ukr tables

Users » andrey_als » Code » TextLCD

Andriy Ribalko / TextLCD

add UTF-8 recode support, Cyrilic rus/ukr tables

Dependents: Current_load1

Fork of TextLCD by Wim Huiskamp

TextLCD Library UTF-8 recode support, Cyrilic rus/ukr tables

TextLCD.cpp@32:59c4b8f648d4, 2014-08-22 (annotated)

Committer:: wim
Date:: Fri Aug 22 19:50:49 2014 +0000
Revision:: 32:59c4b8f648d4
Parent:: 31:ef31cd8a00d1
Child:: 33:900a94bc7585

Added support for controllers PCF2119 (native I2C) and SSD1803A, ST7036 (native I2C/SPI), added setContrast method (by JH1PJL) and setPower method for supported devices (eg ST7032i). Cleaned up Init method.

Who changed what in which revision?

User	Revision	Line number	New contents of line
simon	1:ac48b187213c	1	/* mbed TextLCD Library, for a 4-bit LCD based on HD44780
simon	6:e4cb7ddee0d3	2	* Copyright (c) 2007-2010, sford, http://mbed.org
wim	14:0c32b66b14b8	3	* 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs
wim	14:0c32b66b14b8	4	* 2013, v02: WH, Added I2C and SPI bus interfaces
wim	15:b70ebfffb258	5	* 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers
wim	18:bd65dc10f27f	6	* 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess
wim	18:bd65dc10f27f	7	* 2013, v05: WH, Added support for 8x2B, added some UDCs
wim	19:c747b9e2e7b8	8	* 2013, v06: WH, Added support for devices that use internal DC/DC converters
wim	20:e0da005a777f	9	* 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT
wim	22:35742ec80c24	10	* 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined pins
wim	25:6162b31128c9	11	* 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032
wim	26:bd897a001012	12	* 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module
wim	30:033048611c01	13	* 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers
wim	32:59c4b8f648d4	14	* 2014, v12: WH, Added support for native I2C controller PCF2119 and native I2C/SPI controllers SSD1803, ST7036, added setContrast method (by JH1PJL) for supported devices (eg ST7032i)
simon	1:ac48b187213c	15	*
simon	1:ac48b187213c	16	* Permission is hereby granted, free of charge, to any person obtaining a copy
simon	1:ac48b187213c	17	* of this software and associated documentation files (the "Software"), to deal
simon	1:ac48b187213c	18	* in the Software without restriction, including without limitation the rights
simon	1:ac48b187213c	19	* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
simon	1:ac48b187213c	20	* copies of the Software, and to permit persons to whom the Software is
simon	1:ac48b187213c	21	* furnished to do so, subject to the following conditions:
simon	1:ac48b187213c	22	*
simon	1:ac48b187213c	23	* The above copyright notice and this permission notice shall be included in
simon	1:ac48b187213c	24	* all copies or substantial portions of the Software.
simon	1:ac48b187213c	25	*
simon	1:ac48b187213c	26	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
simon	1:ac48b187213c	27	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
simon	1:ac48b187213c	28	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
simon	1:ac48b187213c	29	* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
simon	1:ac48b187213c	30	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
simon	1:ac48b187213c	31	* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
simon	1:ac48b187213c	32	* THE SOFTWARE.
simon	1:ac48b187213c	33	*/
simon	1:ac48b187213c	34
simon	1:ac48b187213c	35	#include "TextLCD.h"
simon	1:ac48b187213c	36	#include "mbed.h"
simon	1:ac48b187213c	37
wim	30:033048611c01	38	//For Testing only
wim	30:033048611c01	39	//DigitalOut led1(LED1);
wim	30:033048611c01	40	//DigitalOut led2(LED2);
wim	30:033048611c01	41	// led2=!led2;
wim	29:a3663151aa65	42
wim	29:a3663151aa65	43
wim	30:033048611c01	44	/** Some sample User Defined Chars 5x7 dots */
wim	32:59c4b8f648d4	45	//const char udc_ae[] = {0x00, 0x00, 0x1B, 0x05, 0x1F, 0x14, 0x1F, 0x00}; //æ
wim	32:59c4b8f648d4	46	//const char udc_0e[] = {0x00, 0x00, 0x0E, 0x13, 0x15, 0x19, 0x0E, 0x00}; //ø
wim	32:59c4b8f648d4	47	//const char udc_ao[] = {0x0E, 0x0A, 0x0E, 0x01, 0x0F, 0x11, 0x0F, 0x00}; //å
wim	32:59c4b8f648d4	48	//const char udc_AE[] = {0x0F, 0x14, 0x14, 0x1F, 0x14, 0x14, 0x17, 0x00}; //Æ
wim	32:59c4b8f648d4	49	//const char udc_0E[] = {0x0E, 0x13, 0x15, 0x15, 0x15, 0x19, 0x0E, 0x00}; //Ø
wim	32:59c4b8f648d4	50	//const char udc_Ao[] = {0x0E, 0x0A, 0x0E, 0x11, 0x1F, 0x11, 0x11, 0x00}; //Å
wim	32:59c4b8f648d4	51	//const char udc_PO[] = {0x04, 0x0A, 0x0A, 0x1F, 0x1B, 0x1B, 0x1F, 0x00}; //Padlock Open
wim	32:59c4b8f648d4	52	//const char udc_PC[] = {0x1C, 0x10, 0x08, 0x1F, 0x1B, 0x1B, 0x1F, 0x00}; //Padlock Closed
wim	32:59c4b8f648d4	53
wim	32:59c4b8f648d4	54	//const char udc_alpha[] = {0x00, 0x00, 0x0D, 0x12, 0x12, 0x12, 0x0D, 0x00}; //alpha
wim	32:59c4b8f648d4	55	//const char udc_ohm[] = {0x0E, 0x11, 0x11, 0x11, 0x0A, 0x0A, 0x1B, 0x00}; //ohm
wim	32:59c4b8f648d4	56	//const char udc_sigma[] = {0x1F, 0x08, 0x04, 0x02, 0x04, 0x08, 0x1F, 0x00}; //sigma
wim	32:59c4b8f648d4	57	//const char udc_pi[] = {0x1F, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x00}; //pi
wim	32:59c4b8f648d4	58	//const char udc_root[] = {0x07, 0x04, 0x04, 0x04, 0x14, 0x0C, 0x04, 0x00}; //root
wim	30:033048611c01	59
wim	30:033048611c01	60	const char udc_0[] = {0x18, 0x14, 0x12, 0x11, 0x12, 0x14, 0x18, 0x00}; // \|>
wim	30:033048611c01	61	const char udc_1[] = {0x03, 0x05, 0x09, 0x11, 0x09, 0x05, 0x03, 0x00}; // <\|
wim	30:033048611c01	62	const char udc_2[] = {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00}; // \|
wim	30:033048611c01	63	const char udc_3[] = {0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00}; // \|\|
wim	30:033048611c01	64	const char udc_4[] = {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x00}; // \|\|\|
wim	30:033048611c01	65	const char udc_5[] = {0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x00}; // =
wim	30:033048611c01	66	const char udc_6[] = {0x15, 0x0a, 0x15, 0x0a, 0x15, 0x0a, 0x15, 0x00}; // checkerboard
wim	30:033048611c01	67	const char udc_7[] = {0x10, 0x08, 0x04, 0x02, 0x01, 0x00, 0x10, 0x00}; // \
wim	30:033048611c01	68
wim	30:033048611c01	69	const char udc_degr[] = {0x06, 0x09, 0x09, 0x06, 0x00, 0x00, 0x00, 0x00}; // Degree symbol
wim	30:033048611c01	70
wim	30:033048611c01	71	const char udc_TM_T[] = {0x1F, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00}; // Trademark T
wim	30:033048611c01	72	const char udc_TM_M[] = {0x11, 0x1B, 0x15, 0x11, 0x00, 0x00, 0x00, 0x00}; // Trademark M
wim	30:033048611c01	73
wim	30:033048611c01	74	//const char udc_Bat_Hi[] = {0x0E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Full
wim	30:033048611c01	75	//const char udc_Bat_Ha[] = {0x0E, 0x11, 0x13, 0x17, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Half
wim	30:033048611c01	76	//const char udc_Bat_Lo[] = {0x0E, 0x11, 0x11, 0x11, 0x11, 0x11, 0x1F, 0x00}; // Battery Low
wim	30:033048611c01	77	const char udc_Bat_Hi[] = {0x0E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Full
wim	30:033048611c01	78	const char udc_Bat_Ha[] = {0x0E, 0x11, 0x11, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Half
wim	30:033048611c01	79	const char udc_Bat_Lo[] = {0x0E, 0x11, 0x11, 0x11, 0x11, 0x1F, 0x1F, 0x00}; // Battery Low
wim	30:033048611c01	80	const char udc_AC[] = {0x0A, 0x0A, 0x1F, 0x11, 0x0E, 0x04, 0x04, 0x00}; // AC Power
wim	30:033048611c01	81
wim	30:033048611c01	82	//const char udc_smiley[] = {0x00, 0x0A, 0x00, 0x04, 0x11, 0x0E, 0x00, 0x00}; // Smiley
wim	30:033048611c01	83	//const char udc_droopy[] = {0x00, 0x0A, 0x00, 0x04, 0x00, 0x0E, 0x11, 0x00}; // Droopey
wim	30:033048611c01	84	//const char udc_note[] = {0x01, 0x03, 0x05, 0x09, 0x0B, 0x1B, 0x18, 0x00}; // Note
wim	30:033048611c01	85
wim	30:033048611c01	86	//const char udc_bar_1[] = {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00}; // Bar 1
wim	30:033048611c01	87	//const char udc_bar_2[] = {0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00}; // Bar 11
wim	30:033048611c01	88	//const char udc_bar_3[] = {0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x00}; // Bar 111
wim	30:033048611c01	89	//const char udc_bar_4[] = {0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x00}; // Bar 1111
wim	30:033048611c01	90	//const char udc_bar_5[] = {0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Bar 11111
wim	30:033048611c01	91
wim	30:033048611c01	92	//const char udc_ch_1[] = {0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00}; // Hor bars 4
wim	30:033048611c01	93	//const char udc_ch_2[] = {0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f}; // Hor bars 4 (inverted)
wim	30:033048611c01	94	//const char udc_ch_3[] = {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15}; // Ver bars 3
wim	30:033048611c01	95	//const char udc_ch_4[] = {0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a}; // Ver bars 3 (inverted)
wim	30:033048611c01	96	//const char udc_ch_yr[] = {0x08, 0x0f, 0x12, 0x0f, 0x0a, 0x1f, 0x02, 0x02}; // Year (kana)
wim	30:033048611c01	97	//const char udc_ch_mo[] = {0x0f, 0x09, 0x0f, 0x09, 0x0f, 0x09, 0x09, 0x13}; // Month (kana)
wim	30:033048611c01	98	//const char udc_ch_dy[] = {0x1f, 0x11, 0x11, 0x1f, 0x11, 0x11, 0x11, 0x1F}; // Day (kana)
wim	30:033048611c01	99	//const char udc_ch_mi[] = {0x0C, 0x0a, 0x11, 0x1f, 0x09, 0x09, 0x09, 0x13}; // minute (kana)
wim	30:033048611c01	100
wim	32:59c4b8f648d4	101	const char udc_None[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
wim	32:59c4b8f648d4	102	const char udc_All[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
wim	30:033048611c01	103
wim	21:9eb628d9e164	104	/** Create a TextLCD_Base interface
wim	15:b70ebfffb258	105	*
wim	21:9eb628d9e164	106	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	107	* @param ctrl LCD controller (default = HD44780)
wim	15:b70ebfffb258	108	*/
wim	21:9eb628d9e164	109	TextLCD_Base::TextLCD_Base(LCDType type, LCDCtrl ctrl) : _type(type), _ctrl(ctrl) {
wim	30:033048611c01	110
wim	30:033048611c01	111	// Extract LCDType data
wim	30:033048611c01	112
wim	30:033048611c01	113	// Columns encoded in b7..b0
wim	30:033048611c01	114	_nr_cols = (_type & 0xFF);
wim	30:033048611c01	115
wim	30:033048611c01	116	// Rows encoded in b15..b8
wim	30:033048611c01	117	_nr_rows = ((_type >> 8) & 0xFF);
wim	30:033048611c01	118
wim	30:033048611c01	119	// Addressing mode encoded in b19..b16
wim	30:033048611c01	120	_addr_mode = _type & LCD_T_ADR_MSK;
wim	14:0c32b66b14b8	121	}
wim	14:0c32b66b14b8	122
wim	14:0c32b66b14b8	123
wim	21:9eb628d9e164	124	/** Init the LCD Controller(s)
wim	21:9eb628d9e164	125	* Clear display
wim	21:9eb628d9e164	126	*/
wim	21:9eb628d9e164	127	void TextLCD_Base::_init() {
wim	15:b70ebfffb258	128
wim	15:b70ebfffb258	129	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	130	if(_type==LCD40x4) {
wim	30:033048611c01	131	_ctrl_idx=_LCDCtrl_1; // Select 2nd controller
wim	30:033048611c01	132	_initCtrl(); // Init 2nd controller
wim	15:b70ebfffb258	133	}
wim	15:b70ebfffb258	134
wim	15:b70ebfffb258	135	// Select and configure primary LCD controller
wim	27:22d5086f6ba6	136	_ctrl_idx=_LCDCtrl_0; // Select primary controller
wim	19:c747b9e2e7b8	137	_initCtrl(); // Init primary controller
wim	28:30fa94f7341c	138
wim	32:59c4b8f648d4	139	// Clear whole display and Reset Cursor location
wim	32:59c4b8f648d4	140	// Note: This will make sure that some 3-line displays that skip topline of a 4-line configuration
wim	32:59c4b8f648d4	141	// are cleared and init cursor correctly.
wim	32:59c4b8f648d4	142	cls();
wim	15:b70ebfffb258	143	}
wim	15:b70ebfffb258	144
wim	21:9eb628d9e164	145	/** Init the LCD controller
wim	21:9eb628d9e164	146	* 4-bit mode, number of lines, fonttype, no cursor etc
wim	30:033048611c01	147	*
wim	30:033048611c01	148	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	21:9eb628d9e164	149	*/
wim	21:9eb628d9e164	150	void TextLCD_Base::_initCtrl() {
wim	32:59c4b8f648d4	151	int _bias_lines=0; // Set Bias and lines (Instr Set 1), temporary variable.
wim	32:59c4b8f648d4	152	int _lines=0; // Set lines (Ext Instr Set), temporary variable.
wim	32:59c4b8f648d4	153	// int _function_x=0; // Set ext. function (Ext Instr Set), temporary variable.
wim	32:59c4b8f648d4	154
wim	26:bd897a001012	155	this->_setRS(false); // command mode
wim	13:24506ba22480	156
wim	26:bd897a001012	157	wait_ms(20); // Wait 20ms to ensure powered up
simon	1:ac48b187213c	158
wim	17:652ab113bc2e	159	// send "Display Settings" 3 times (Only top nibble of 0x30 as we've got 4-bit bus)
wim	17:652ab113bc2e	160	for (int i=0; i<3; i++) {
wim	17:652ab113bc2e	161	_writeNibble(0x3);
wim	20:e0da005a777f	162	wait_ms(15); // This command takes 1.64ms, so wait for it
wim	17:652ab113bc2e	163	}
wim	17:652ab113bc2e	164	_writeNibble(0x2); // 4-bit mode
wim	17:652ab113bc2e	165	wait_us(40); // most instructions take 40us
wim	18:bd65dc10f27f	166
wim	18:bd65dc10f27f	167	// Display is now in 4-bit mode
wim	27:22d5086f6ba6	168	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	25:6162b31128c9	169
wim	29:a3663151aa65	170	// Device specific initialisations: DC/DC converter to generate VLCD or VLED, number of lines etc
wim	19:c747b9e2e7b8	171	switch (_ctrl) {
wim	32:59c4b8f648d4	172
wim	29:a3663151aa65	173	case KS0078:
wim	29:a3663151aa65	174	// Initialise Display configuration
wim	29:a3663151aa65	175	switch (_type) {
wim	29:a3663151aa65	176	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	177	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	178	// case LCD12x1:
wim	29:a3663151aa65	179	case LCD16x1:
wim	30:033048611c01	180	// case LCD20x1:
wim	29:a3663151aa65	181	case LCD24x1:
wim	32:59c4b8f648d4	182	_function = 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	183	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	184	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	185	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	186	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	187	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	188
wim	32:59c4b8f648d4	189	_function_1 = 0x04; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	190	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	191	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	192	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	193	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	194	// 0
wim	30:033048611c01	195
wim	32:59c4b8f648d4	196	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	197	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	29:a3663151aa65	198	break;
wim	29:a3663151aa65	199
wim	32:59c4b8f648d4	200	// case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	201	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	202	// case LCD12x4D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	203	// case LCD16x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	204	// case LCD16x4D: // Special mode for KS0078
wim	30:033048611c01	205	// case LCD24x3D: // Special mode for KS0078
wim	30:033048611c01	206	// case LCD24x3D1: // Special mode for KS0078
wim	30:033048611c01	207	case LCD24x4D: // Special mode for KS0078
wim	32:59c4b8f648d4	208	_function = 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	209	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	210	// N=0 (dont care for 4 line mode)
wim	32:59c4b8f648d4	211	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	212	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	213	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	214
wim	32:59c4b8f648d4	215	_function_1 = 0x04; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	216	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	217	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	218	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	219	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	220	// 0
wim	29:a3663151aa65	221
wim	32:59c4b8f648d4	222	_function_x = 0x01; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	223	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	30:033048611c01	224	break;
wim	30:033048611c01	225
wim	29:a3663151aa65	226	default:
wim	30:033048611c01	227	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	32:59c4b8f648d4	228	_function = 0x0A; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	229	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	230	// N=1 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	231	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	232	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	233	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	234
wim	32:59c4b8f648d4	235	_function_1 = 0x0C; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	236	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	237	// N=1 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	238	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	239	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	240	// 0
wim	30:033048611c01	241
wim	32:59c4b8f648d4	242	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	243	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	29:a3663151aa65	244	break;
wim	29:a3663151aa65	245	} // switch type
wim	29:a3663151aa65	246
wim	32:59c4b8f648d4	247	// init special features
wim	32:59c4b8f648d4	248	_writeCommand(0x20 \| _function_1);// Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	249	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	32:59c4b8f648d4	250	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	251	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	252	// BE=0 (Blink Enable/Disable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	253	// 0
wim	32:59c4b8f648d4	254
wim	32:59c4b8f648d4	255	_writeCommand(0x08 \| _function_x); // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	256	// FW=0 (5-dot font, special mode for KS0078)
wim	32:59c4b8f648d4	257	// BW=0 (Cur BW invert disable, special mode for KS0078)
wim	32:59c4b8f648d4	258	// NW=0 (1,2 Line), NW=1 (4 line, special mode for KS0078)
wim	32:59c4b8f648d4	259
wim	32:59c4b8f648d4	260	_writeCommand(0x10); // Scroll/Shift set 0001 DS/HS4 DS/HS3 DS/HS2 DS/HS1 (Ext Regs)
wim	32:59c4b8f648d4	261	// Dotscroll/Display shift enable (Special mode for KS0078)
wim	32:59c4b8f648d4	262
wim	32:59c4b8f648d4	263	_writeCommand(0x80); // Scroll Quantity set 1 0 SQ5 SQ4 SQ3 SQ2 SQ1 SQ0 (Ext Regs)
wim	32:59c4b8f648d4	264	// Scroll quantity (Special mode for KS0078)
wim	32:59c4b8f648d4	265
wim	32:59c4b8f648d4	266	_writeCommand(0x20 \| _function); // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	267	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	32:59c4b8f648d4	268	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	269	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	270	// DH=1 (Disp shift enable/disable, special mode for KS0078)
wim	32:59c4b8f648d4	271	// REV=0 (Reverse/Normal, special mode for KS0078)
wim	29:a3663151aa65	272	break; // case KS0078 Controller
wim	29:a3663151aa65	273
wim	26:bd897a001012	274	case ST7032_3V3:
wim	26:bd897a001012	275	// ST7032 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	26:bd897a001012	276	case ST7032_5V:
wim	32:59c4b8f648d4	277	// ST7032 controller: Disable Voltage booster for VLCD. VDD=5V
wim	29:a3663151aa65	278
wim	29:a3663151aa65	279	// Initialise Display configuration
wim	29:a3663151aa65	280	switch (_type) {
wim	29:a3663151aa65	281	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	282	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	283	// case LCD12x1:
wim	29:a3663151aa65	284	case LCD16x1:
wim	30:033048611c01	285	// case LCD20x1:
wim	32:59c4b8f648d4	286	case LCD24x1:
wim	32:59c4b8f648d4	287	_function = 0x00; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=0 (1-line display mode), F=0 (5*7dot), 0, IS
wim	32:59c4b8f648d4	288	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	289	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	290	break;
wim	28:30fa94f7341c	291
wim	32:59c4b8f648d4	292	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	293	case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	294	case LCD12x4D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	295	case LCD24x4D: // Special mode for KS0078
wim	32:59c4b8f648d4	296	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	297	break;
wim	29:a3663151aa65	298
wim	32:59c4b8f648d4	299	default:
wim	32:59c4b8f648d4	300	// All other LCD types are initialised as 2 Line displays
wim	32:59c4b8f648d4	301	_function = 0x08; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=1 (2-line display mode), F=0 (5*7dot), 0, IS
wim	32:59c4b8f648d4	302	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	303	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	304	break;
wim	32:59c4b8f648d4	305	} // switch type
wim	32:59c4b8f648d4	306
wim	32:59c4b8f648d4	307	// init special features
wim	32:59c4b8f648d4	308	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instruction Set = 1
wim	32:59c4b8f648d4	309
wim	32:59c4b8f648d4	310	_writeCommand(0x1C); // Internal OSC frequency adjustment Framefreq=183HZ, Bias will be 1/4 (IS=1)
wim	32:59c4b8f648d4	311
wim	32:59c4b8f648d4	312	_contrast = LCD_ST7032_CONTRAST;
wim	32:59c4b8f648d4	313	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast Low bits, 0 1 1 1 C3 C2 C1 C0 (IS=1)
wim	32:59c4b8f648d4	314
wim	32:59c4b8f648d4	315
wim	32:59c4b8f648d4	316	if (_ctrl == ST7032_3V3) {
wim	32:59c4b8f648d4	317	_icon_power = 0x04; // Icon display off, Booster circuit is turned on (IS=1)
wim	32:59c4b8f648d4	318	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	319	}
wim	32:59c4b8f648d4	320	else {
wim	32:59c4b8f648d4	321	_icon_power = 0x00; // Icon display off, Booster circuit is turned off (IS=1)
wim	32:59c4b8f648d4	322	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	323	}
wim	32:59c4b8f648d4	324	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Icon, Booster and Contrast High bits, 0 1 0 1 Ion Bon C5 C4 (IS=1)
wim	32:59c4b8f648d4	325	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	326
wim	32:59c4b8f648d4	327	_writeCommand(0x68 \| (LCD_ST7032_RAB & 0x07)); // Voltage follower, 0 1 1 0 FOn=1, Ampl ratio Rab2=1, Rab1=0, Rab0=0 (IS=1)
wim	32:59c4b8f648d4	328	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	329
wim	32:59c4b8f648d4	330	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	331
wim	32:59c4b8f648d4	332	break; // case ST7032_3V3 Controller
wim	32:59c4b8f648d4	333	// case ST7032_5V Controller
wim	32:59c4b8f648d4	334
wim	32:59c4b8f648d4	335	case ST7036_3V3:
wim	32:59c4b8f648d4	336	// ST7036 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	32:59c4b8f648d4	337	// Note: supports 1,2 (LCD_T_A) or 3 lines (LCD_T_G)
wim	32:59c4b8f648d4	338	case ST7036_5V:
wim	32:59c4b8f648d4	339	// ST7036 controller: Disable Voltage booster for VLCD. VDD=5V
wim	32:59c4b8f648d4	340	// Note: supports 1,2 (LCD_T_A) or 3 lines (LCD_T_G)
wim	32:59c4b8f648d4	341
wim	32:59c4b8f648d4	342	// Initialise Display configuration
wim	32:59c4b8f648d4	343	switch (_type) {
wim	32:59c4b8f648d4	344	case LCD8x1: //8x1 is a regular 1 line display
wim	32:59c4b8f648d4	345	case LCD8x2B: //8x2D is a special case of 16x1
wim	32:59c4b8f648d4	346	// case LCD12x1:
wim	32:59c4b8f648d4	347	case LCD16x1:
wim	32:59c4b8f648d4	348	case LCD24x1:
wim	32:59c4b8f648d4	349	_function = 0x00; // Set function, 0 0 1 DL=0 (4-bit Databus), N=0 (1 Line), DH=0 (5x7font), IS2, IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	350	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	351	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	352
wim	32:59c4b8f648d4	353	_bias_lines = 0x04; // Bias: 1/5, 1 or 2-Lines LCD
wim	32:59c4b8f648d4	354	break;
wim	32:59c4b8f648d4	355
wim	32:59c4b8f648d4	356	// case LCD12x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	357	case LCD16x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	358	_function = 0x08; // Set function, 0 0 1 DL=0 (4-bit Databus), N=1 (2 Line), DH=0 (5x7font), IS2,IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	359	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	360	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	361
wim	32:59c4b8f648d4	362	_bias_lines = 0x05; // Bias: 1/5, 3-Lines LCD
wim	32:59c4b8f648d4	363	break;
wim	32:59c4b8f648d4	364
wim	32:59c4b8f648d4	365	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	366	// case LCD16x3D1: // Special mode for SSD1803
wim	30:033048611c01	367	case LCD12x4D: // Special mode for PCF2116
wim	30:033048611c01	368	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	369	error("Error: LCD Controller type does not support this Display type\n\r");
wim	29:a3663151aa65	370	break;
wim	28:30fa94f7341c	371
wim	29:a3663151aa65	372	default:
wim	32:59c4b8f648d4	373	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	32:59c4b8f648d4	374	_function = 0x08; // Set function, 0 0 1 DL=0 (4-bit Databus), N=1 (2 Line), DH=0 (5x7font), IS2,IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	375	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	376	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	377
wim	32:59c4b8f648d4	378	_bias_lines = 0x04; // Bias: 1/5, 1 or 2-Lines LCD
wim	32:59c4b8f648d4	379	break;
wim	32:59c4b8f648d4	380	} // switch type
wim	32:59c4b8f648d4	381
wim	29:a3663151aa65	382
wim	32:59c4b8f648d4	383	// init special features
wim	32:59c4b8f648d4	384	_writeCommand(0x20 \| _function \| 0x01); // Set function, IS2,IS1 = 01 (Select Instruction Set = 1)
wim	32:59c4b8f648d4	385	_writeCommand(0x10 \| _bias_lines); // Set Bias and 1,2 or 3 lines (Instr Set 1)
wim	29:a3663151aa65	386
wim	32:59c4b8f648d4	387	_contrast = LCD_ST7036_CONTRAST;
wim	32:59c4b8f648d4	388	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast, 0 1 1 1 C3 C2 C1 C0 (Instr Set 1)
wim	32:59c4b8f648d4	389
wim	32:59c4b8f648d4	390	if (_ctrl == ST7036_3V3) {
wim	32:59c4b8f648d4	391	_icon_power = 0x04; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=0 Bon=1 C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	392	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	393	}
wim	32:59c4b8f648d4	394	else {
wim	32:59c4b8f648d4	395	_icon_power = 0x00; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=0 Bon=0 C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	396	}
wim	29:a3663151aa65	397
wim	32:59c4b8f648d4	398	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Contrast C5, C4 (Instr Set 1)
wim	32:59c4b8f648d4	399	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	400
wim	32:59c4b8f648d4	401	_writeCommand(0x68 \| (LCD_ST7036_RAB & 0x07)); // Voltagefollower On = 1, Ampl ratio Rab2, Rab1, Rab0 = 1 0 1 (Instr Set 1)
wim	32:59c4b8f648d4	402	wait_ms(10); // Wait 10ms to ensure powered up
wim	28:30fa94f7341c	403
wim	32:59c4b8f648d4	404	_writeCommand(0x20 \| _function); // Set function, IS2,IS1 = 00 (Select Instruction Set = 0)
wim	32:59c4b8f648d4	405
wim	32:59c4b8f648d4	406	break; // case ST7036_3V3 Controller
wim	32:59c4b8f648d4	407	// case ST7036_5V Controller
wim	32:59c4b8f648d4	408
wim	32:59c4b8f648d4	409	case SSD1803_3V3:
wim	32:59c4b8f648d4	410	// SSD1803 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	32:59c4b8f648d4	411	// Note: supports 1,2, 3 or 4 lines
wim	32:59c4b8f648d4	412	// case SSD1803_5V:
wim	32:59c4b8f648d4	413	// SSD1803 controller: No Voltage booster for VLCD. VDD=5V
wim	32:59c4b8f648d4	414
wim	29:a3663151aa65	415	// Initialise Display configuration
wim	29:a3663151aa65	416	switch (_type) {
wim	29:a3663151aa65	417	case LCD8x1: //8x1 is a regular 1 line display
wim	30:033048611c01	418	case LCD8x2B: //8x2D is a special case of 16x1
wim	29:a3663151aa65	419	// case LCD12x1:
wim	29:a3663151aa65	420	case LCD16x1:
wim	29:a3663151aa65	421	case LCD24x1:
wim	32:59c4b8f648d4	422	_function = 0x00; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	423	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	424	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	425	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	426	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	427	// DH=0 Double Height disable
wim	32:59c4b8f648d4	428	// IS=0
wim	32:59c4b8f648d4	429
wim	32:59c4b8f648d4	430	_function_1 = 0x00; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	431	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	432	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	433	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	434	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	435	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	436	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	437
wim	32:59c4b8f648d4	438	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	439	// NW=0 1-Line LCD (N=0)
wim	29:a3663151aa65	440	break;
wim	32:59c4b8f648d4	441
wim	32:59c4b8f648d4	442	case LCD12x3D: // Special mode for KS0078, ST7036 and PCF21XX
wim	32:59c4b8f648d4	443	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	444	case LCD16x3D: // Special mode for KS0078 and ST7036
wim	32:59c4b8f648d4	445	// case LCD16x3D1: // Special mode for SSD1803
wim	32:59c4b8f648d4	446	// case LCD20x3D: // Special mode for SSD1803
wim	32:59c4b8f648d4	447	_function = 0x00; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	448	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	449	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	450	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	451	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	452	// DH=0 Double Height disable
wim	32:59c4b8f648d4	453	// IS=0
wim	32:59c4b8f648d4	454
wim	32:59c4b8f648d4	455	_function_1 = 0x00; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	456	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	457	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	458	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	459	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	460	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	461	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	462
wim	32:59c4b8f648d4	463	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	464	// NW=1 3-Line LCD (N=0)
wim	29:a3663151aa65	465	break;
wim	30:033048611c01	466
wim	32:59c4b8f648d4	467	case LCD20x4D: // Special mode for SSD1803
wim	32:59c4b8f648d4	468	_function = 0x08; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	469	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	470	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	471	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	472	// N=1 4 Line
wim	32:59c4b8f648d4	473	// DH=0 Double Height disable
wim	32:59c4b8f648d4	474	// IS=0
wim	32:59c4b8f648d4	475
wim	32:59c4b8f648d4	476	_function_1 = 0x08; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	477	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	478	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	479	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	480	// N=1 4 Line
wim	32:59c4b8f648d4	481	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	482	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	483
wim	32:59c4b8f648d4	484	_lines = 0x01; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	485	// NW=1 4-Line LCD (N=1)
wim	32:59c4b8f648d4	486	break;
wim	32:59c4b8f648d4	487
wim	32:59c4b8f648d4	488	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	489	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	490	break;
wim	30:033048611c01	491
wim	29:a3663151aa65	492	default:
wim	30:033048611c01	493	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	32:59c4b8f648d4	494	_function = 0x08; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	495	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	496	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	497	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	498	// N=1 2 line / 4 Line
wim	32:59c4b8f648d4	499	// DH=0 Double Height disable
wim	32:59c4b8f648d4	500	// IS=0
wim	29:a3663151aa65	501
wim	32:59c4b8f648d4	502	_function_1 = 0x08; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	503	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	504	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	505	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	506	// N=1 2 line / 4 Line
wim	32:59c4b8f648d4	507	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	508	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	509
wim	32:59c4b8f648d4	510	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	511	// NW=0 2-Line LCD (N=1)
wim	32:59c4b8f648d4	512	break;
wim	32:59c4b8f648d4	513	} // switch type
wim	32:59c4b8f648d4	514
wim	32:59c4b8f648d4	515
wim	32:59c4b8f648d4	516	// init special features
wim	32:59c4b8f648d4	517	_writeCommand(0x20 \| _function_1 \| 0x02); // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	518	// Select Extended Instruction Set
wim	32:59c4b8f648d4	519
wim	32:59c4b8f648d4	520	_writeCommand(0x10); // Double Height and Bias, 0 0 0 1 UD2=0, UD1=0, BS1=0 Bias 1/5, DH=0 (Ext Instr Set)
wim	32:59c4b8f648d4	521
wim	32:59c4b8f648d4	522	_writeCommand(0x08 \| _lines); // Set ext function 0 0 0 0 1 FW BW NW 1,2,3 or 4 lines (Ext Instr Set)
wim	32:59c4b8f648d4	523
wim	32:59c4b8f648d4	524	_writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-31, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	32:59c4b8f648d4	525	// _writeCommand(0x04); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM31-1, BDS=0 SEG100-1 "Top View" (Ext Instr Set)
wim	32:59c4b8f648d4	526
wim	32:59c4b8f648d4	527	// _writeCommand(0x76); // Set TC Control, 0 1 1 1 0 1 1 0 (Ext Instr Set)
wim	32:59c4b8f648d4	528	// _writeData(0x02); // Set TC data, 0 0 0 0 0 TC2,TC1,TC0 = 0 1 0 (Ext Instr Set)
wim	32:59c4b8f648d4	529
wim	32:59c4b8f648d4	530	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N DH RE(0) IS=1 Select Instruction Set 1
wim	32:59c4b8f648d4	531	// Select Std Instr set, Select IS=1
wim	32:59c4b8f648d4	532
wim	32:59c4b8f648d4	533	_contrast = LCD_SSD1_CONTRAST;
wim	32:59c4b8f648d4	534	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast 0 1 1 1 C3, C2, C1, C0 (Instr Set 1)
wim	32:59c4b8f648d4	535
wim	32:59c4b8f648d4	536	_icon_power = 0x04; // Icon off, Booster on (Instr Set 1)
wim	32:59c4b8f648d4	537	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	538	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Power, Icon and Contrast, 0 1 0 1 Ion Bon C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	539	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	540
wim	32:59c4b8f648d4	541	_writeCommand(0x68 \| (LCD_SSD1_RAB & 0x07)); // Set Voltagefollower 0 1 1 0 Don = 1, Ampl ratio Rab2, Rab1, Rab0 = 1 1 0 (Instr Set 1)
wim	32:59c4b8f648d4	542	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	543
wim	32:59c4b8f648d4	544	_writeCommand(0x20 \| _function_1 \| 0x02); // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	545	// Select Extended Instruction Set 1
wim	32:59c4b8f648d4	546	_writeCommand(0x10); // Shift/Scroll enable, 0 0 0 1 DS4/HS4 DS3/HS3 DS2/HS2 DS1/HS1 (Ext Instr Set 1)
wim	32:59c4b8f648d4	547
wim	32:59c4b8f648d4	548
wim	32:59c4b8f648d4	549	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	32:59c4b8f648d4	550	// Select Std Instr set, Select IS=0
wim	32:59c4b8f648d4	551
wim	32:59c4b8f648d4	552	break; // case SSD1803 Controller
wim	32:59c4b8f648d4	553
wim	29:a3663151aa65	554
wim	32:59c4b8f648d4	555	// Note1: The PCF21XX family of controllers has several types that dont have an onboard voltage generator for V-LCD.
wim	32:59c4b8f648d4	556	// You must supply this LCD voltage externally and not try to enable VGen.
wim	32:59c4b8f648d4	557	// Note2: The early versions of PCF2116 controllers (eg PCF2116C) can not generate sufficiently negative voltage for the LCD at a VDD of 3V3.
wim	32:59c4b8f648d4	558	// You must supply this voltage externally and not enable VGen or you must use a higher VDD (e.g. 5V) and enable VGen.
wim	32:59c4b8f648d4	559	// More recent versions of the controller (eg PCF2116K) have an improved VGen that will work with 3V3.
wim	32:59c4b8f648d4	560	// Note3: See datasheet, PCF2116 and other types provide a V0 pin to control the LCD contrast voltage that is provided by VGen. This pins allows
wim	32:59c4b8f648d4	561	// contrast control similar to that of pin 3 on the standard 14pin LCD module connector.
wim	32:59c4b8f648d4	562	// You can disable VGen by connecting Vo to VDD. VLCD will then be used directly as LCD voltage.
wim	32:59c4b8f648d4	563	// Note4: PCF2113 and PCF2119 are different wrt to VLCD generator! There is no V0 pin. The contrast voltage is software controlled by setting the VA and VB registers.
wim	32:59c4b8f648d4	564	// Vgen is automatically switched off when the contrast voltage VA or VB is set to 0x00. Note that certain limits apply to allowed values for VA and VB.
wim	32:59c4b8f648d4	565	// Note5: See datasheet, members of the PCF21XX family support different numbers of rows/columns. Not all can support 3 or 4 rows.
wim	32:59c4b8f648d4	566	// Note6: See datasheet, the PCF21XX-C and PCF21XX-K use a non-standard character set. This may result is strange looking text when not corrected..
wim	32:59c4b8f648d4	567
wim	30:033048611c01	568	case PCF2113_3V3:
wim	32:59c4b8f648d4	569	// PCF2113 controller: Initialise Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	29:a3663151aa65	570	// Initialise Display configuration
wim	29:a3663151aa65	571	switch (_type) {
wim	29:a3663151aa65	572	// case LCD12x1:
wim	32:59c4b8f648d4	573	// _function = 0x02; // FUNCTION SET DL=0 4 bit, 0, M=0 1-line/12 chars display mode, SL=1
wim	32:59c4b8f648d4	574	// Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	575	case LCD24x1:
wim	32:59c4b8f648d4	576	_function = 0x00; // FUNCTION SET DL=0 4 bit, 0, M=0 1-line/24 chars display mode, SL=0
wim	32:59c4b8f648d4	577	// Note: 4 bit mode is ignored for I2C mode
wim	30:033048611c01	578	break;
wim	30:033048611c01	579
wim	30:033048611c01	580	//Tested OK for PCF2113
wim	30:033048611c01	581	case LCD12x2:
wim	32:59c4b8f648d4	582	_function = 0x04; // FUNCTION SET DL=0 4 bit, 0, M=1 2-line/12 chars display mode, SL=0
wim	30:033048611c01	583	break;
wim	30:033048611c01	584
wim	30:033048611c01	585	default:
wim	30:033048611c01	586	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	587	break;
wim	30:033048611c01	588
wim	30:033048611c01	589	} // switch type
wim	30:033048611c01	590
wim	32:59c4b8f648d4	591	// Init special features
wim	32:59c4b8f648d4	592	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instruction Set = 1
wim	32:59c4b8f648d4	593
wim	32:59c4b8f648d4	594	_writeCommand(0x04); // DISP CONF SET (Instr. Set 1) 0000 0, 1, P=0, Q=0
wim	32:59c4b8f648d4	595	_writeCommand(0x10); // TEMP CTRL SET (Instr. Set 1) 0001 0, 0, TC1=0, TC2=0
wim	32:59c4b8f648d4	596	// _writeCommand(0x42); // HV GEN (Instr. Set 1) 0100 S1=1, S2=0 (2x multiplier)
wim	32:59c4b8f648d4	597	_writeCommand(0x40 \| (LCD_PCF2_S12 & 0x03)); // HV GEN (Instr. Set 1) 0100 S1=1, S2=0 (2x multiplier)
wim	32:59c4b8f648d4	598
wim	32:59c4b8f648d4	599	_contrast = LCD_PCF2_CONTRAST;
wim	32:59c4b8f648d4	600	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
wim	32:59c4b8f648d4	601	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
wim	32:59c4b8f648d4	602	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	603
wim	32:59c4b8f648d4	604	_writeCommand(0x02); // SCRN CONF (Instr. Set 1) L=0
wim	32:59c4b8f648d4	605	_writeCommand(0x08); // ICON CONF (Instr. Set 1) IM=0 (Char mode) IB=0 (no icon blink) DM=0 (no direct mode)
wim	32:59c4b8f648d4	606
wim	32:59c4b8f648d4	607	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	608
wim	30:033048611c01	609	break; // case PCF2113_3V3 Controller
wim	30:033048611c01	610
wim	30:033048611c01	611
wim	32:59c4b8f648d4	612	// case PCF2113_5V:
wim	32:59c4b8f648d4	613	// PCF2113 controller: No Voltage generator for VLCD. VDD=5V. Contrast voltage controlled by VA or VB.
wim	32:59c4b8f648d4	614	//@TODO
wim	32:59c4b8f648d4	615
wim	30:033048611c01	616
wim	30:033048611c01	617	case PCF2116_3V3:
wim	32:59c4b8f648d4	618	// PCF2116 controller: Voltage generator for VLCD. VDD=5V. V0 controls contrast voltage.
wim	30:033048611c01	619	// Initialise Display configuration
wim	30:033048611c01	620	switch (_type) {
wim	30:033048611c01	621	// case LCD12x1:
wim	30:033048611c01	622	// case LCD12x2:
wim	30:033048611c01	623	case LCD24x1:
wim	32:59c4b8f648d4	624	_writeCommand(0x22); //FUNCTION SET 4 bit, N/M=0 1-line/24 chars display mode, G=1 Vgen on
wim	29:a3663151aa65	625	//Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	626	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	627	break;
wim	29:a3663151aa65	628
wim	32:59c4b8f648d4	629	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	630	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	631	case LCD12x4D: // Special mode for PCF21XX:
wim	30:033048611c01	632	_writeCommand(0x2E); //FUNCTION SET 4 bit, N=1/M=1 4-line/12 chars display mode, G=1 VGen on
wim	29:a3663151aa65	633	//Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	634	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	635	break;
wim	30:033048611c01	636
wim	30:033048611c01	637	case LCD24x2:
wim	30:033048611c01	638	_writeCommand(0x2A); //FUNCTION SET 4 bit, N=1/M=0 2-line/24 chars display mode, G=1 VGen on
wim	29:a3663151aa65	639	//Note: 4 bit mode is ignored for I2C mode
wim	30:033048611c01	640	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	641	break;
wim	32:59c4b8f648d4	642
wim	30:033048611c01	643	default:
wim	30:033048611c01	644	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	645	break;
wim	30:033048611c01	646
wim	29:a3663151aa65	647	} // switch type
wim	29:a3663151aa65	648
wim	30:033048611c01	649	break; // case PCF2116_3V3 Controller
wim	29:a3663151aa65	650
wim	32:59c4b8f648d4	651
wim	32:59c4b8f648d4	652	//Experimental for cellphone 3-line display, SA=0x74, No Ack supported, Character set C or K, DL = 8 bit, N=0,M=1 (reserved mode !!), external VLCD -2V5
wim	32:59c4b8f648d4	653	//@TODO
wim	32:59c4b8f648d4	654	case PCF2116_5V:
wim	32:59c4b8f648d4	655	// PCF2116 controller: No Voltage generator for VLCD. VDD=5V. V0 controls contrast voltage.
wim	32:59c4b8f648d4	656	// Initialise Display configuration
wim	32:59c4b8f648d4	657	switch (_type) {
wim	32:59c4b8f648d4	658	// case LCD12x1:
wim	32:59c4b8f648d4	659	// case LCD12x2:
wim	32:59c4b8f648d4	660	// case LCD24x1:
wim	32:59c4b8f648d4	661	// _writeCommand(0x20); //FUNCTION SET 4 bit, N/M=0 1-line/24 chars display mode
wim	32:59c4b8f648d4	662	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	663	// wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	664	// break;
wim	32:59c4b8f648d4	665
wim	32:59c4b8f648d4	666	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	667	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	668	case LCD12x4D: // Special mode for PCF21XX:
wim	32:59c4b8f648d4	669	// _writeCommand(0x34); //FUNCTION SET 8 bit, N=0/M=1 4-line/12 chars display mode OK
wim	32:59c4b8f648d4	670	// _writeCommand(0x24); //FUNCTION SET 4 bit, N=0/M=1 4-line/12 chars display mode OK
wim	32:59c4b8f648d4	671	_writeCommand(0x2C); //FUNCTION SET 4 bit, N=1/M=1 4-line/12 chars display mode OK
wim	32:59c4b8f648d4	672	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	673	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	674	break;
wim	32:59c4b8f648d4	675
wim	32:59c4b8f648d4	676	// case LCD24x2:
wim	32:59c4b8f648d4	677	// _writeCommand(0x28); //FUNCTION SET 4 bit, N=1/M=0 2-line/24 chars display mode
wim	32:59c4b8f648d4	678	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	679	// wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	680	// break;
wim	32:59c4b8f648d4	681
wim	32:59c4b8f648d4	682	default:
wim	32:59c4b8f648d4	683	error("Error: LCD Controller type does not support this Display type\n\r");
wim	32:59c4b8f648d4	684	break;
wim	32:59c4b8f648d4	685
wim	32:59c4b8f648d4	686	} // switch type
wim	32:59c4b8f648d4	687
wim	32:59c4b8f648d4	688	break; // case PCF2116_5V Controller
wim	32:59c4b8f648d4	689
wim	32:59c4b8f648d4	690	case PCF2119_3V3:
wim	32:59c4b8f648d4	691	// PCF2119 controller: Initialise Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	32:59c4b8f648d4	692	// Note1: See datasheet, the PCF2119 supports icons and provides separate constrast control for Icons and characters.
wim	32:59c4b8f648d4	693	// Note2: Vgen is switched off when the contrast voltage VA or VB is set to 0x00.
wim	32:59c4b8f648d4	694
wim	32:59c4b8f648d4	695	//POR or Hardware Reset should be applied
wim	32:59c4b8f648d4	696	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	697
wim	32:59c4b8f648d4	698	// Initialise Display configuration
wim	32:59c4b8f648d4	699	switch (_type) {
wim	32:59c4b8f648d4	700	case LCD8x1:
wim	32:59c4b8f648d4	701	// case LCD12x1:
wim	32:59c4b8f648d4	702	case LCD16x1:
wim	32:59c4b8f648d4	703	_function = 0x02; // FUNCTION SET DL=0 4 bit, 0 , M=0 1-line/16 chars display mode, SL=1
wim	32:59c4b8f648d4	704	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	705	break;
wim	32:59c4b8f648d4	706
wim	32:59c4b8f648d4	707	case LCD24x1:
wim	32:59c4b8f648d4	708	// case LCD32x1:
wim	32:59c4b8f648d4	709	_function = 0x00; // FUNCTION SET DL=0 4 bit, 0 , M=0 1-line/32 chars display mode, SL=0
wim	32:59c4b8f648d4	710	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	711	break;
wim	32:59c4b8f648d4	712
wim	32:59c4b8f648d4	713	case LCD8x2:
wim	32:59c4b8f648d4	714	// case LCD12x2:
wim	32:59c4b8f648d4	715	case LCD16x2:
wim	32:59c4b8f648d4	716	_function = 0x04; // FUNCTION SET DL=0 4 bit, 0, M=1 2-line/16 chars display mode, SL=0
wim	32:59c4b8f648d4	717	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	718	break;
wim	32:59c4b8f648d4	719
wim	32:59c4b8f648d4	720	default:
wim	32:59c4b8f648d4	721	error("Error: LCD Controller type does not support this Display type\n\r");
wim	32:59c4b8f648d4	722	break;
wim	32:59c4b8f648d4	723
wim	32:59c4b8f648d4	724	} // switch type
wim	32:59c4b8f648d4	725
wim	32:59c4b8f648d4	726	// Init special features
wim	32:59c4b8f648d4	727	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instruction Set = 1
wim	32:59c4b8f648d4	728
wim	32:59c4b8f648d4	729	_writeCommand(0x04); // DISP CONF SET (Instr. Set 1) 0000, 0, 1, P=0, Q=0
wim	32:59c4b8f648d4	730	_writeCommand(0x10); // TEMP CTRL SET (Instr. Set 1) 0001, 0, 0, TC1=0, TC2=0
wim	32:59c4b8f648d4	731	// _writeCommand(0x42); // HV GEN (Instr. Set 1) 0100, 0, 0, S1=1, S2=0 (2x multiplier)
wim	32:59c4b8f648d4	732	_writeCommand(0x40 \| (LCD_PCF2_S12 & 0x03)); // HV GEN (Instr. Set 1) 0100, 0, 0, S1=1, S2=0 (2x multiplier)
wim	32:59c4b8f648d4	733
wim	32:59c4b8f648d4	734	_contrast = LCD_PCF2_CONTRAST;
wim	32:59c4b8f648d4	735	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
wim	32:59c4b8f648d4	736	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
wim	32:59c4b8f648d4	737	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	738
wim	32:59c4b8f648d4	739	_writeCommand(0x02); // SCRN CONF (Instr. Set 1) L=0
wim	32:59c4b8f648d4	740	_writeCommand(0x08); // ICON CONF (Instr. Set 1) IM=0 (Char mode) IB=0 (no icon blink) DM=0 (no direct mode)
wim	32:59c4b8f648d4	741
wim	32:59c4b8f648d4	742	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	743
wim	32:59c4b8f648d4	744	break; // case PCF2119_3V3 Controller
wim	32:59c4b8f648d4	745
wim	32:59c4b8f648d4	746	// case PCF2119_5V:
wim	32:59c4b8f648d4	747	// PCF2119 controller: No Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	32:59c4b8f648d4	748	// Note1: See datasheet, the PCF2119 supports icons and provides separate constrast control for Icons and characters.
wim	32:59c4b8f648d4	749	// Note2: Vgen is switched off when the contrast voltage VA or VB is set to 0x00.
wim	30:033048611c01	750	//@TODO
wim	29:a3663151aa65	751
wim	19:c747b9e2e7b8	752	case WS0010:
wim	19:c747b9e2e7b8	753	// WS0010 OLED controller: Initialise DC/DC Voltage converter for LEDs
wim	30:033048611c01	754	// Note1: Identical to RS0010
wim	30:033048611c01	755	// Note2: supports 1 or 2 lines (and 16x100 graphics)
wim	30:033048611c01	756	// supports 4 fonts (English/Japanese (default), Western European-I, English/Russian, Western European-II)
wim	19:c747b9e2e7b8	757	// Cursor/Disp shift set 0001 SC RL 0 0
wim	19:c747b9e2e7b8	758	//
wim	30:033048611c01	759	// Mode and Power set 0001 GC PWR 1 1
wim	19:c747b9e2e7b8	760	// GC = 0 (Graph Mode=1, Char Mode=0)
wim	30:033048611c01	761	// PWR = 1 (DC/DC On/Off)
wim	30:033048611c01	762
wim	30:033048611c01	763	//@Todo: This may be needed to enable a warm reboot
wim	32:59c4b8f648d4	764	//_writeCommand(0x13); // Char mode, DC/DC off
wim	30:033048611c01	765	//wait_ms(10); // Wait 10ms to ensure powered down
wim	32:59c4b8f648d4	766	_writeCommand(0x17); // Char mode, DC/DC on
wim	30:033048611c01	767	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	768
wim	29:a3663151aa65	769	// Initialise Display configuration
wim	29:a3663151aa65	770	switch (_type) {
wim	29:a3663151aa65	771	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	772	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	773	// case LCD12x1:
wim	29:a3663151aa65	774	case LCD16x1:
wim	30:033048611c01	775	case LCD24x1:
wim	30:033048611c01	776	_writeCommand(0x20); // Function set 001 DL N F FT1 FT0
wim	30:033048611c01	777	// DL=0 (4 bits bus)
wim	30:033048611c01	778	// N=0 (1 line)
wim	30:033048611c01	779	// F=0 (5x7 dots font)
wim	30:033048611c01	780	// FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2
wim	30:033048611c01	781	break;
wim	30:033048611c01	782
wim	32:59c4b8f648d4	783	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	784	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	785	case LCD12x4D: // Special mode for PCF21XX:
wim	30:033048611c01	786	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	787	error("Error: LCD Controller type does not support this Display type\n\r");
wim	29:a3663151aa65	788	break;
wim	29:a3663151aa65	789
wim	29:a3663151aa65	790	default:
wim	30:033048611c01	791	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	30:033048611c01	792	_writeCommand(0x28); // Function set 001 DL N F FT1 FT0
wim	30:033048611c01	793	// DL=0 (4 bits bus)
wim	30:033048611c01	794	// N=1 (2 lines)
wim	30:033048611c01	795	// F=0 (5x7 dots font)
wim	30:033048611c01	796	// FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2
wim	30:033048611c01	797
wim	29:a3663151aa65	798	break;
wim	29:a3663151aa65	799	} // switch type
wim	29:a3663151aa65	800
wim	32:59c4b8f648d4	801	break; // case WS0010 Controller
wim	29:a3663151aa65	802
wim	19:c747b9e2e7b8	803	default:
wim	32:59c4b8f648d4	804	// Devices fully compatible to HD44780 that do not use any DC/DC Voltage converters but external VLCD, no icons etc
wim	10:dd9b3a696acd	805
wim	29:a3663151aa65	806	// Initialise Display configuration
wim	29:a3663151aa65	807	switch (_type) {
wim	29:a3663151aa65	808	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	809	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	810	// case LCD12x1:
wim	29:a3663151aa65	811	case LCD16x1:
wim	30:033048611c01	812	// case LCD20x1:
wim	29:a3663151aa65	813	case LCD24x1:
wim	30:033048611c01	814	// case LCD40x1:
wim	32:59c4b8f648d4	815	_function = 0x00; // Function set 001 DL N F - -
wim	29:a3663151aa65	816	// DL=0 (4 bits bus)
wim	29:a3663151aa65	817	// N=0 (1 line)
wim	29:a3663151aa65	818	// F=0 (5x7 dots font)
wim	32:59c4b8f648d4	819	_writeCommand(0x20 \| _function);
wim	29:a3663151aa65	820	break;
wim	29:a3663151aa65	821
wim	32:59c4b8f648d4	822	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	823	case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	824	case LCD12x4D: // Special mode for KS0078 and PCF21XX:
wim	32:59c4b8f648d4	825	case LCD16x3D: // Special mode for KS0078 and ST7036
wim	32:59c4b8f648d4	826	// case LCD16x3D1: // Special mode for KS0078
wim	30:033048611c01	827	// case LCD24x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	828	// case LCD24x3D1: // Special mode for KS0078
wim	30:033048611c01	829	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	830	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	831	break;
wim	30:033048611c01	832
wim	30:033048611c01	833	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	29:a3663151aa65	834	default:
wim	32:59c4b8f648d4	835	_function = 0x08; // Function set 001 DL N F - -
wim	29:a3663151aa65	836	// DL=0 (4 bits bus)
wim	29:a3663151aa65	837	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	29:a3663151aa65	838	// N=1 (2 lines)
wim	29:a3663151aa65	839	// F=0 (5x7 dots font, only option for 2 line display)
wim	32:59c4b8f648d4	840	// - (Don't care)
wim	32:59c4b8f648d4	841	_writeCommand(0x20 \| _function);
wim	29:a3663151aa65	842	break;
wim	29:a3663151aa65	843	} // switch type
wim	10:dd9b3a696acd	844
wim	29:a3663151aa65	845	break; // case default Controller
wim	29:a3663151aa65	846
wim	29:a3663151aa65	847	} // switch Controller specific initialisations
wim	29:a3663151aa65	848
wim	10:dd9b3a696acd	849
wim	30:033048611c01	850	// Controller general initialisations
wim	32:59c4b8f648d4	851	// _writeCommand(0x01); // cls, and set cursor to 0
wim	32:59c4b8f648d4	852	// wait_ms(10); // The CLS command takes 1.64 ms.
wim	32:59c4b8f648d4	853	// // Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	28:30fa94f7341c	854
wim	28:30fa94f7341c	855	_writeCommand(0x02); // Return Home
wim	28:30fa94f7341c	856	// Cursor Home, DDRAM Address to Origin
wim	28:30fa94f7341c	857
wim	28:30fa94f7341c	858	_writeCommand(0x06); // Entry Mode 0000 0 1 I/D S
wim	13:24506ba22480	859	// Cursor Direction and Display Shift
wim	28:30fa94f7341c	860	// I/D=1 (Cur incr)
wim	28:30fa94f7341c	861	// S=0 (No display shift)
wim	10:dd9b3a696acd	862
wim	29:a3663151aa65	863	_writeCommand(0x14); // Cursor or Display shift 0001 S/C R/L x x
wim	29:a3663151aa65	864	// S/C=0 Cursor moves
wim	29:a3663151aa65	865	// R/L=1 Right
wim	29:a3663151aa65	866	//
wim	29:a3663151aa65	867
wim	13:24506ba22480	868	// _writeCommand(0x0C); // Display Ctrl 0000 1 D C B
wim	17:652ab113bc2e	869	// // Display On, Cursor Off, Blink Off
wim	21:9eb628d9e164	870	setCursor(CurOff_BlkOff);
wim	21:9eb628d9e164	871	setMode(DispOn);
simon	1:ac48b187213c	872	}
simon	1:ac48b187213c	873
wim	8:03116f75b66e	874
wim	21:9eb628d9e164	875	/** Clear the screen, Cursor home.
wim	21:9eb628d9e164	876	*/
wim	21:9eb628d9e164	877	void TextLCD_Base::cls() {
wim	15:b70ebfffb258	878
wim	15:b70ebfffb258	879	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	880	if(_type==LCD40x4) {
wim	21:9eb628d9e164	881	_ctrl_idx=_LCDCtrl_1; // Select 2nd controller
wim	15:b70ebfffb258	882
wim	15:b70ebfffb258	883	// Second LCD controller Cursor always Off
wim	21:9eb628d9e164	884	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	15:b70ebfffb258	885
wim	15:b70ebfffb258	886	// Second LCD controller Clearscreen
wim	27:22d5086f6ba6	887	_writeCommand(0x01); // cls, and set cursor to 0
wim	29:a3663151aa65	888	wait_ms(10); // The CLS command takes 1.64 ms.
wim	29:a3663151aa65	889	// Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	15:b70ebfffb258	890
wim	21:9eb628d9e164	891	_ctrl_idx=_LCDCtrl_0; // Select primary controller
wim	15:b70ebfffb258	892	}
wim	15:b70ebfffb258	893
wim	15:b70ebfffb258	894	// Primary LCD controller Clearscreen
wim	27:22d5086f6ba6	895	_writeCommand(0x01); // cls, and set cursor to 0
wim	29:a3663151aa65	896	wait_ms(10); // The CLS command takes 1.64 ms.
wim	29:a3663151aa65	897	// Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	15:b70ebfffb258	898
wim	15:b70ebfffb258	899	// Restore cursormode on primary LCD controller when needed
wim	15:b70ebfffb258	900	if(_type==LCD40x4) {
wim	17:652ab113bc2e	901	_setCursorAndDisplayMode(_currentMode,_currentCursor);
wim	15:b70ebfffb258	902	}
wim	15:b70ebfffb258	903
wim	29:a3663151aa65	904	setAddress(0, 0); // Reset Cursor location
wim	32:59c4b8f648d4	905	// Note: This is needed because some displays (eg PCF21XX) don't use line 0 in the '3 Line' mode.
simon	1:ac48b187213c	906	}
simon	1:ac48b187213c	907
wim	29:a3663151aa65	908	/** Locate cursor to a screen column and row
wim	29:a3663151aa65	909	*
wim	29:a3663151aa65	910	* @param column The horizontal position from the left, indexed from 0
wim	29:a3663151aa65	911	* @param row The vertical position from the top, indexed from 0
wim	29:a3663151aa65	912	*/
wim	21:9eb628d9e164	913	void TextLCD_Base::locate(int column, int row) {
wim	15:b70ebfffb258	914
wim	15:b70ebfffb258	915	// setAddress() does all the heavy lifting:
wim	15:b70ebfffb258	916	// check column and row sanity,
wim	15:b70ebfffb258	917	// switch controllers for LCD40x4 if needed
wim	15:b70ebfffb258	918	// switch cursor for LCD40x4 if needed
wim	15:b70ebfffb258	919	// set the new memory address to show cursor at correct location
wim	32:59c4b8f648d4	920	setAddress(column, row);
wim	15:b70ebfffb258	921	}
wim	30:033048611c01	922
wim	15:b70ebfffb258	923
wim	21:9eb628d9e164	924	/** Write a single character (Stream implementation)
wim	21:9eb628d9e164	925	*/
wim	21:9eb628d9e164	926	int TextLCD_Base::_putc(int value) {
wim	15:b70ebfffb258	927	int addr;
wim	15:b70ebfffb258	928
wim	15:b70ebfffb258	929	if (value == '\n') {
wim	15:b70ebfffb258	930	//No character to write
wim	15:b70ebfffb258	931
wim	15:b70ebfffb258	932	//Update Cursor
wim	15:b70ebfffb258	933	_column = 0;
wim	15:b70ebfffb258	934	_row++;
wim	15:b70ebfffb258	935	if (_row >= rows()) {
wim	15:b70ebfffb258	936	_row = 0;
wim	15:b70ebfffb258	937	}
wim	15:b70ebfffb258	938	}
wim	15:b70ebfffb258	939	else {
wim	15:b70ebfffb258	940	//Character to write
wim	15:b70ebfffb258	941	_writeData(value);
wim	15:b70ebfffb258	942
wim	15:b70ebfffb258	943	//Update Cursor
wim	15:b70ebfffb258	944	_column++;
wim	15:b70ebfffb258	945	if (_column >= columns()) {
wim	15:b70ebfffb258	946	_column = 0;
wim	15:b70ebfffb258	947	_row++;
wim	15:b70ebfffb258	948	if (_row >= rows()) {
wim	15:b70ebfffb258	949	_row = 0;
wim	15:b70ebfffb258	950	}
wim	15:b70ebfffb258	951	}
wim	15:b70ebfffb258	952	} //else
wim	15:b70ebfffb258	953
wim	15:b70ebfffb258	954	//Set next memoryaddress, make sure cursor blinks at next location
wim	15:b70ebfffb258	955	addr = getAddress(_column, _row);
wim	15:b70ebfffb258	956	_writeCommand(0x80 \| addr);
wim	15:b70ebfffb258	957
wim	15:b70ebfffb258	958	return value;
wim	15:b70ebfffb258	959	}
wim	15:b70ebfffb258	960
wim	15:b70ebfffb258	961
wim	16:c276b75e6585	962	// get a single character (Stream implementation)
wim	21:9eb628d9e164	963	int TextLCD_Base::_getc() {
simon	1:ac48b187213c	964	return -1;
simon	1:ac48b187213c	965	}
simon	1:ac48b187213c	966
wim	14:0c32b66b14b8	967
wim	17:652ab113bc2e	968	// Write a nibble using the 4-bit interface
wim	21:9eb628d9e164	969	void TextLCD_Base::_writeNibble(int value) {
wim	17:652ab113bc2e	970
wim	17:652ab113bc2e	971	// Enable is Low
wim	21:9eb628d9e164	972	this->_setEnable(true);
wim	21:9eb628d9e164	973	this->_setData(value & 0x0F); // Low nibble
wim	17:652ab113bc2e	974	wait_us(1); // Data setup time
wim	21:9eb628d9e164	975	this->_setEnable(false);
wim	17:652ab113bc2e	976	wait_us(1); // Datahold time
wim	17:652ab113bc2e	977
wim	17:652ab113bc2e	978	// Enable is Low
wim	17:652ab113bc2e	979	}
wim	17:652ab113bc2e	980
wim	16:c276b75e6585	981	// Write a byte using the 4-bit interface
wim	21:9eb628d9e164	982	void TextLCD_Base::_writeByte(int value) {
wim	15:b70ebfffb258	983
wim	15:b70ebfffb258	984	// Enable is Low
wim	21:9eb628d9e164	985	this->_setEnable(true);
wim	21:9eb628d9e164	986	this->_setData(value >> 4); // High nibble
wim	15:b70ebfffb258	987	wait_us(1); // Data setup time
wim	21:9eb628d9e164	988	this->_setEnable(false);
wim	15:b70ebfffb258	989	wait_us(1); // Data hold time
wim	15:b70ebfffb258	990
wim	21:9eb628d9e164	991	this->_setEnable(true);
wim	21:9eb628d9e164	992	this->_setData(value >> 0); // Low nibble
wim	15:b70ebfffb258	993	wait_us(1); // Data setup time
wim	21:9eb628d9e164	994	this->_setEnable(false);
wim	15:b70ebfffb258	995	wait_us(1); // Datahold time
wim	15:b70ebfffb258	996
wim	15:b70ebfffb258	997	// Enable is Low
simon	1:ac48b187213c	998	}
simon	1:ac48b187213c	999
wim	21:9eb628d9e164	1000	// Write a command byte to the LCD controller
wim	21:9eb628d9e164	1001	void TextLCD_Base::_writeCommand(int command) {
wim	15:b70ebfffb258	1002
wim	21:9eb628d9e164	1003	this->_setRS(false);
wim	16:c276b75e6585	1004	wait_us(1); // Data setup time for RS
wim	15:b70ebfffb258	1005
wim	21:9eb628d9e164	1006	this->_writeByte(command);
wim	15:b70ebfffb258	1007	wait_us(40); // most instructions take 40us
simon	1:ac48b187213c	1008	}
simon	1:ac48b187213c	1009
wim	21:9eb628d9e164	1010	// Write a data byte to the LCD controller
wim	21:9eb628d9e164	1011	void TextLCD_Base::_writeData(int data) {
wim	15:b70ebfffb258	1012
wim	21:9eb628d9e164	1013	this->_setRS(true);
wim	16:c276b75e6585	1014	wait_us(1); // Data setup time for RS
wim	15:b70ebfffb258	1015
wim	21:9eb628d9e164	1016	this->_writeByte(data);
wim	15:b70ebfffb258	1017	wait_us(40); // data writes take 40us
simon	1:ac48b187213c	1018	}
simon	1:ac48b187213c	1019
wim	8:03116f75b66e	1020
wim	32:59c4b8f648d4	1021	// This replaces the original _address() method.
wim	8:03116f75b66e	1022	// It is confusing since it returns the memoryaddress or-ed with the set memorycommand 0x80.
wim	8:03116f75b66e	1023	// Left it in here for compatibility with older code. New applications should use getAddress() instead.
wim	21:9eb628d9e164	1024	int TextLCD_Base::_address(int column, int row) {
wim	8:03116f75b66e	1025	return 0x80 \| getAddress(column, row);
wim	8:03116f75b66e	1026	}
wim	8:03116f75b66e	1027
wim	30:033048611c01	1028
wim	30:033048611c01	1029	// This is new method to return the memory address based on row, column and displaytype.
wim	30:033048611c01	1030	//
wim	30:033048611c01	1031	/** Return the memoryaddress of screen column and row location
wim	30:033048611c01	1032	*
wim	30:033048611c01	1033	* @param column The horizontal position from the left, indexed from 0
wim	30:033048611c01	1034	* @param row The vertical position from the top, indexed from 0
wim	30:033048611c01	1035	* @param return The memoryaddress of screen column and row location
wim	30:033048611c01	1036	*
wim	30:033048611c01	1037	*/
wim	30:033048611c01	1038	int TextLCD_Base::getAddress(int column, int row) {
wim	30:033048611c01	1039
wim	30:033048611c01	1040	switch (_addr_mode) {
wim	30:033048611c01	1041
wim	30:033048611c01	1042	case LCD_T_A:
wim	30:033048611c01	1043	//Default addressing mode for 1, 2 and 4 rows (except 40x4)
wim	30:033048611c01	1044	//The two available rows are split and stacked on top of eachother. Addressing for 3rd and 4th line continues where lines 1 and 2 were split.
wim	30:033048611c01	1045	//Displays top rows when less than four are used.
wim	30:033048611c01	1046	switch (row) {
wim	30:033048611c01	1047	case 0:
wim	30:033048611c01	1048	return 0x00 + column;
wim	30:033048611c01	1049	case 1:
wim	30:033048611c01	1050	return 0x40 + column;
wim	30:033048611c01	1051	case 2:
wim	30:033048611c01	1052	return 0x00 + _nr_cols + column;
wim	30:033048611c01	1053	case 3:
wim	30:033048611c01	1054	return 0x40 + _nr_cols + column;
wim	30:033048611c01	1055	// Should never get here.
wim	30:033048611c01	1056	default:
wim	30:033048611c01	1057	return 0x00;
wim	30:033048611c01	1058	}
wim	30:033048611c01	1059
wim	30:033048611c01	1060	case LCD_T_B:
wim	30:033048611c01	1061	// LCD8x2B is a special layout of LCD16x1
wim	30:033048611c01	1062	if (row==0)
wim	30:033048611c01	1063	return 0x00 + column;
wim	30:033048611c01	1064	else
wim	30:033048611c01	1065	// return _nr_cols + column;
wim	30:033048611c01	1066	return 0x08 + column;
wim	30:033048611c01	1067
wim	30:033048611c01	1068	case LCD_T_C:
wim	30:033048611c01	1069	// LCD16x1C is a special layout of LCD8x2
wim	32:59c4b8f648d4	1070	#if(1)
wim	32:59c4b8f648d4	1071	if (column < 8)
wim	30:033048611c01	1072	return 0x00 + column;
wim	30:033048611c01	1073	else
wim	30:033048611c01	1074	return 0x40 + (column - 8);
wim	32:59c4b8f648d4	1075	#else
wim	32:59c4b8f648d4	1076	if (column < (_nr_cols >> 1))
wim	32:59c4b8f648d4	1077	return 0x00 + column;
wim	32:59c4b8f648d4	1078	else
wim	32:59c4b8f648d4	1079	return 0x40 + (column - (_nr_cols >> 1));
wim	32:59c4b8f648d4	1080	#endif
wim	30:033048611c01	1081
wim	30:033048611c01	1082	// Not sure about this one, seems wrong.
wim	30:033048611c01	1083	// Left in for compatibility with original library
wim	30:033048611c01	1084	// case LCD16x2B:
wim	30:033048611c01	1085	// return 0x00 + (row * 40) + column;
wim	30:033048611c01	1086
wim	30:033048611c01	1087
wim	30:033048611c01	1088	case LCD_T_D:
wim	32:59c4b8f648d4	1089	//Alternate addressing mode for 3 and 4 row displays (except 40x4). Used by PCF21XX, KS0078, ST7036, SSD1803
wim	30:033048611c01	1090	//The 4 available rows start at a hardcoded address.
wim	30:033048611c01	1091	//Displays top rows when less than four are used.
wim	30:033048611c01	1092	switch (row) {
wim	30:033048611c01	1093	case 0:
wim	30:033048611c01	1094	return 0x00 + column;
wim	30:033048611c01	1095	case 1:
wim	30:033048611c01	1096	return 0x20 + column;
wim	30:033048611c01	1097	case 2:
wim	30:033048611c01	1098	return 0x40 + column;
wim	30:033048611c01	1099	case 3:
wim	30:033048611c01	1100	return 0x60 + column;
wim	30:033048611c01	1101	// Should never get here.
wim	30:033048611c01	1102	default:
wim	30:033048611c01	1103	return 0x00;
wim	30:033048611c01	1104	}
wim	30:033048611c01	1105
wim	30:033048611c01	1106	case LCD_T_D1:
wim	32:59c4b8f648d4	1107	//Alternate addressing mode for 3 row displays. Used by PCF21XX, KS0078, SSD1803
wim	30:033048611c01	1108	//The 4 available rows start at a hardcoded address.
wim	30:033048611c01	1109	//Skips top row of 4 row display and starts display at row 1
wim	30:033048611c01	1110	switch (row) {
wim	30:033048611c01	1111	case 0:
wim	30:033048611c01	1112	return 0x20 + column;
wim	30:033048611c01	1113	case 1:
wim	30:033048611c01	1114	return 0x40 + column;
wim	30:033048611c01	1115	case 2:
wim	30:033048611c01	1116	return 0x60 + column;
wim	30:033048611c01	1117	// Should never get here.
wim	30:033048611c01	1118	default:
wim	30:033048611c01	1119	return 0x00;
wim	30:033048611c01	1120	}
wim	30:033048611c01	1121
wim	30:033048611c01	1122	case LCD_T_E:
wim	30:033048611c01	1123	// LCD40x4 is a special case since it has 2 controllers.
wim	30:033048611c01	1124	// Each controller is configured as 40x2 (Type A)
wim	30:033048611c01	1125	if (row<2) {
wim	30:033048611c01	1126	// Test to see if we need to switch between controllers
wim	30:033048611c01	1127	if (_ctrl_idx != _LCDCtrl_0) {
wim	30:033048611c01	1128
wim	30:033048611c01	1129	// Second LCD controller Cursor Off
wim	30:033048611c01	1130	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	30:033048611c01	1131
wim	30:033048611c01	1132	// Select primary controller
wim	30:033048611c01	1133	_ctrl_idx = _LCDCtrl_0;
wim	30:033048611c01	1134
wim	30:033048611c01	1135	// Restore cursormode on primary LCD controller
wim	30:033048611c01	1136	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	1137	}
wim	30:033048611c01	1138
wim	30:033048611c01	1139	return 0x00 + (row * 0x40) + column;
wim	30:033048611c01	1140	}
wim	30:033048611c01	1141	else {
wim	30:033048611c01	1142
wim	30:033048611c01	1143	// Test to see if we need to switch between controllers
wim	30:033048611c01	1144	if (_ctrl_idx != _LCDCtrl_1) {
wim	30:033048611c01	1145	// Primary LCD controller Cursor Off
wim	30:033048611c01	1146	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	30:033048611c01	1147
wim	30:033048611c01	1148	// Select secondary controller
wim	30:033048611c01	1149	_ctrl_idx = _LCDCtrl_1;
wim	30:033048611c01	1150
wim	30:033048611c01	1151	// Restore cursormode on secondary LCD controller
wim	30:033048611c01	1152	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	1153	}
wim	30:033048611c01	1154
wim	30:033048611c01	1155	return 0x00 + ((row-2) * 0x40) + column;
wim	30:033048611c01	1156	}
wim	30:033048611c01	1157
wim	32:59c4b8f648d4	1158	case LCD_T_F:
wim	32:59c4b8f648d4	1159	//Alternate addressing mode for 3 row displays.
wim	32:59c4b8f648d4	1160	//The first half of 3rd row continues from 1st row, the second half continues from 2nd row.
wim	32:59c4b8f648d4	1161	switch (row) {
wim	32:59c4b8f648d4	1162	case 0:
wim	32:59c4b8f648d4	1163	return 0x00 + column;
wim	32:59c4b8f648d4	1164	case 1:
wim	32:59c4b8f648d4	1165	return 0x40 + column;
wim	32:59c4b8f648d4	1166	case 2:
wim	32:59c4b8f648d4	1167	if (column < (_nr_cols >> 1)) // check first or second half of line
wim	32:59c4b8f648d4	1168	return (0x00 + _nr_cols + column);
wim	32:59c4b8f648d4	1169	else
wim	32:59c4b8f648d4	1170	return (0x40 + _nr_cols + (column - (_nr_cols >> 1)));
wim	32:59c4b8f648d4	1171	// Should never get here.
wim	32:59c4b8f648d4	1172	default:
wim	32:59c4b8f648d4	1173	return 0x00;
wim	32:59c4b8f648d4	1174	}
wim	32:59c4b8f648d4	1175
wim	32:59c4b8f648d4	1176	case LCD_T_G:
wim	32:59c4b8f648d4	1177	//Alternate addressing mode for 3 row displays. Used by ST7036
wim	32:59c4b8f648d4	1178	switch (row) {
wim	32:59c4b8f648d4	1179	case 0:
wim	32:59c4b8f648d4	1180	return 0x00 + column;
wim	32:59c4b8f648d4	1181	case 1:
wim	32:59c4b8f648d4	1182	return 0x10 + column;
wim	32:59c4b8f648d4	1183	case 2:
wim	32:59c4b8f648d4	1184	return 0x20 + column;
wim	32:59c4b8f648d4	1185	// Should never get here.
wim	32:59c4b8f648d4	1186	default:
wim	32:59c4b8f648d4	1187	return 0x00;
wim	32:59c4b8f648d4	1188	}
wim	32:59c4b8f648d4	1189
wim	30:033048611c01	1190	// Should never get here.
wim	30:033048611c01	1191	default:
wim	30:033048611c01	1192	return 0x00;
wim	32:59c4b8f648d4	1193
wim	32:59c4b8f648d4	1194	} // switch _addr_mode
wim	30:033048611c01	1195	}
wim	30:033048611c01	1196
wim	30:033048611c01	1197
wim	29:a3663151aa65	1198	/** Set the memoryaddress of screen column and row location
wim	29:a3663151aa65	1199	*
wim	29:a3663151aa65	1200	* @param column The horizontal position from the left, indexed from 0
wim	29:a3663151aa65	1201	* @param row The vertical position from the top, indexed from 0
wim	29:a3663151aa65	1202	*/
wim	21:9eb628d9e164	1203	void TextLCD_Base::setAddress(int column, int row) {
wim	15:b70ebfffb258	1204
wim	15:b70ebfffb258	1205	// Sanity Check column
wim	15:b70ebfffb258	1206	if (column < 0) {
wim	15:b70ebfffb258	1207	_column = 0;
wim	15:b70ebfffb258	1208	}
wim	15:b70ebfffb258	1209	else if (column >= columns()) {
wim	15:b70ebfffb258	1210	_column = columns() - 1;
wim	15:b70ebfffb258	1211	} else _column = column;
wim	8:03116f75b66e	1212
wim	15:b70ebfffb258	1213	// Sanity Check row
wim	15:b70ebfffb258	1214	if (row < 0) {
wim	15:b70ebfffb258	1215	_row = 0;
wim	15:b70ebfffb258	1216	}
wim	15:b70ebfffb258	1217	else if (row >= rows()) {
wim	15:b70ebfffb258	1218	_row = rows() - 1;
wim	15:b70ebfffb258	1219	} else _row = row;
wim	15:b70ebfffb258	1220
wim	15:b70ebfffb258	1221
wim	15:b70ebfffb258	1222	// Compute the memory address
wim	15:b70ebfffb258	1223	// For LCD40x4: switch controllers if needed
wim	15:b70ebfffb258	1224	// switch cursor if needed
wim	15:b70ebfffb258	1225	int addr = getAddress(_column, _row);
wim	8:03116f75b66e	1226
wim	13:24506ba22480	1227	_writeCommand(0x80 \| addr);
wim	8:03116f75b66e	1228	}
simon	1:ac48b187213c	1229
wim	29:a3663151aa65	1230
wim	29:a3663151aa65	1231	/** Return the number of columns
wim	29:a3663151aa65	1232	*
wim	29:a3663151aa65	1233	* @param return The number of columns
wim	30:033048611c01	1234	*
wim	30:033048611c01	1235	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	29:a3663151aa65	1236	*/
wim	21:9eb628d9e164	1237	int TextLCD_Base::columns() {
wim	30:033048611c01	1238
wim	30:033048611c01	1239	// Columns encoded in b7..b0
wim	30:033048611c01	1240	//return (_type & 0xFF);
wim	31:ef31cd8a00d1	1241	return _nr_cols;
simon	1:ac48b187213c	1242	}
simon	1:ac48b187213c	1243
wim	29:a3663151aa65	1244	/** Return the number of rows
wim	29:a3663151aa65	1245	*
wim	29:a3663151aa65	1246	* @param return The number of rows
wim	30:033048611c01	1247	*
wim	30:033048611c01	1248	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	29:a3663151aa65	1249	*/
wim	21:9eb628d9e164	1250	int TextLCD_Base::rows() {
wim	30:033048611c01	1251
wim	30:033048611c01	1252	// Rows encoded in b15..b8
wim	30:033048611c01	1253	//return ((_type >> 8) & 0xFF);
wim	30:033048611c01	1254	return _nr_rows;
simon	1:ac48b187213c	1255	}
wim	10:dd9b3a696acd	1256
wim	29:a3663151aa65	1257	/** Set the Cursormode
wim	29:a3663151aa65	1258	*
wim	29:a3663151aa65	1259	* @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn)
wim	29:a3663151aa65	1260	*/
wim	21:9eb628d9e164	1261	void TextLCD_Base::setCursor(LCDCursor cursorMode) {
wim	15:b70ebfffb258	1262
wim	17:652ab113bc2e	1263	// Save new cursor mode, needed when 2 controllers are in use or when display is switched off/on
wim	17:652ab113bc2e	1264	_currentCursor = cursorMode;
wim	10:dd9b3a696acd	1265
wim	17:652ab113bc2e	1266	// Configure only current LCD controller
wim	31:ef31cd8a00d1	1267	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	15:b70ebfffb258	1268	}
wim	15:b70ebfffb258	1269
wim	29:a3663151aa65	1270	/** Set the Displaymode
wim	29:a3663151aa65	1271	*
wim	29:a3663151aa65	1272	* @param displayMode The Display mode (DispOff, DispOn)
wim	29:a3663151aa65	1273	*/
wim	21:9eb628d9e164	1274	void TextLCD_Base::setMode(LCDMode displayMode) {
wim	17:652ab113bc2e	1275
wim	17:652ab113bc2e	1276	// Save new displayMode, needed when 2 controllers are in use or when cursor is changed
wim	17:652ab113bc2e	1277	_currentMode = displayMode;
wim	15:b70ebfffb258	1278
wim	17:652ab113bc2e	1279	// Select and configure second LCD controller when needed
wim	17:652ab113bc2e	1280	if(_type==LCD40x4) {
wim	21:9eb628d9e164	1281	if (_ctrl_idx==_LCDCtrl_0) {
wim	17:652ab113bc2e	1282	// Configure primary LCD controller
wim	17:652ab113bc2e	1283	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	11:9ec02df863a1	1284
wim	17:652ab113bc2e	1285	// Select 2nd controller
wim	21:9eb628d9e164	1286	_ctrl_idx=_LCDCtrl_1;
wim	17:652ab113bc2e	1287
wim	17:652ab113bc2e	1288	// Configure secondary LCD controller
wim	21:9eb628d9e164	1289	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	11:9ec02df863a1	1290
wim	17:652ab113bc2e	1291	// Restore current controller
wim	21:9eb628d9e164	1292	_ctrl_idx=_LCDCtrl_0;
wim	17:652ab113bc2e	1293	}
wim	17:652ab113bc2e	1294	else {
wim	17:652ab113bc2e	1295	// Select primary controller
wim	21:9eb628d9e164	1296	_ctrl_idx=_LCDCtrl_0;
wim	17:652ab113bc2e	1297
wim	17:652ab113bc2e	1298	// Configure primary LCD controller
wim	21:9eb628d9e164	1299	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	17:652ab113bc2e	1300
wim	17:652ab113bc2e	1301	// Restore current controller
wim	21:9eb628d9e164	1302	_ctrl_idx=_LCDCtrl_1;
wim	11:9ec02df863a1	1303
wim	17:652ab113bc2e	1304	// Configure secondary LCD controller
wim	17:652ab113bc2e	1305	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	10:dd9b3a696acd	1306	}
wim	17:652ab113bc2e	1307	}
wim	17:652ab113bc2e	1308	else {
wim	17:652ab113bc2e	1309	// Configure primary LCD controller
wim	17:652ab113bc2e	1310	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	1311	}
wim	17:652ab113bc2e	1312	}
wim	17:652ab113bc2e	1313
wim	17:652ab113bc2e	1314
wim	29:a3663151aa65	1315	/** Low level method to restore the cursortype and display mode for current controller
wim	29:a3663151aa65	1316	*/
wim	21:9eb628d9e164	1317	void TextLCD_Base::_setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType) {
wim	17:652ab113bc2e	1318
wim	17:652ab113bc2e	1319	// Configure current LCD controller
wim	17:652ab113bc2e	1320	_writeCommand(0x08 \| displayMode \| cursorType);
wim	10:dd9b3a696acd	1321	}
wim	10:dd9b3a696acd	1322
wim	29:a3663151aa65	1323	/** Set the Backlight mode
wim	29:a3663151aa65	1324	*
wim	29:a3663151aa65	1325	* @param backlightMode The Backlight mode (LightOff, LightOn)
wim	29:a3663151aa65	1326	*/
wim	21:9eb628d9e164	1327	void TextLCD_Base::setBacklight(LCDBacklight backlightMode) {
wim	20:e0da005a777f	1328
wim	20:e0da005a777f	1329	if (backlightMode == LightOn) {
wim	21:9eb628d9e164	1330	this->_setBL(true);
wim	20:e0da005a777f	1331	}
wim	20:e0da005a777f	1332	else {
wim	21:9eb628d9e164	1333	this->_setBL(false);
wim	20:e0da005a777f	1334	}
wim	20:e0da005a777f	1335	}
wim	20:e0da005a777f	1336
wim	29:a3663151aa65	1337	/** Set User Defined Characters
wim	29:a3663151aa65	1338	*
wim	29:a3663151aa65	1339	* @param unsigned char c The Index of the UDC (0..7)
wim	29:a3663151aa65	1340	* @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits)
wim	29:a3663151aa65	1341	*/
wim	21:9eb628d9e164	1342	void TextLCD_Base::setUDC(unsigned char c, char *udc_data) {
wim	15:b70ebfffb258	1343
wim	15:b70ebfffb258	1344	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	1345	if(_type==LCD40x4) {
wim	19:c747b9e2e7b8	1346	_LCDCtrl_Idx current_ctrl_idx = _ctrl_idx; // Temp save current controller
wim	15:b70ebfffb258	1347
wim	15:b70ebfffb258	1348	// Select primary controller
wim	21:9eb628d9e164	1349	_ctrl_idx=_LCDCtrl_0;
wim	15:b70ebfffb258	1350
wim	15:b70ebfffb258	1351	// Configure primary LCD controller
wim	15:b70ebfffb258	1352	_setUDC(c, udc_data);
wim	15:b70ebfffb258	1353
wim	15:b70ebfffb258	1354	// Select 2nd controller
wim	21:9eb628d9e164	1355	_ctrl_idx=_LCDCtrl_1;
wim	15:b70ebfffb258	1356
wim	15:b70ebfffb258	1357	// Configure secondary LCD controller
wim	15:b70ebfffb258	1358	_setUDC(c, udc_data);
wim	11:9ec02df863a1	1359
wim	15:b70ebfffb258	1360	// Restore current controller
wim	19:c747b9e2e7b8	1361	_ctrl_idx=current_ctrl_idx;
wim	15:b70ebfffb258	1362	}
wim	15:b70ebfffb258	1363	else {
wim	15:b70ebfffb258	1364	// Configure primary LCD controller
wim	15:b70ebfffb258	1365	_setUDC(c, udc_data);
wim	15:b70ebfffb258	1366	}
wim	15:b70ebfffb258	1367
wim	15:b70ebfffb258	1368	}
wim	15:b70ebfffb258	1369
wim	29:a3663151aa65	1370	/** Low level method to store user defined characters for current controller
wim	29:a3663151aa65	1371	*/
wim	21:9eb628d9e164	1372	void TextLCD_Base::_setUDC(unsigned char c, char *udc_data) {
wim	15:b70ebfffb258	1373
wim	15:b70ebfffb258	1374	// Select CG RAM for current LCD controller
wim	15:b70ebfffb258	1375	_writeCommand(0x40 + ((c & 0x07) << 3)); //Set CG-RAM address,
wim	15:b70ebfffb258	1376	//8 sequential locations needed per UDC
wim	15:b70ebfffb258	1377	// Store UDC pattern
wim	11:9ec02df863a1	1378	for (int i=0; i<8; i++) {
wim	13:24506ba22480	1379	_writeData(*udc_data++);
wim	11:9ec02df863a1	1380	}
wim	15:b70ebfffb258	1381
wim	15:b70ebfffb258	1382	//Select DD RAM again for current LCD controller
wim	15:b70ebfffb258	1383	int addr = getAddress(_column, _row);
wim	30:033048611c01	1384	_writeCommand(0x80 \| addr);
wim	11:9ec02df863a1	1385	}
wim	21:9eb628d9e164	1386
wim	32:59c4b8f648d4	1387
wim	32:59c4b8f648d4	1388	/** Set Contrast
wim	32:59c4b8f648d4	1389	* setContrast method is supported by some compatible devices (eg ST7032i) that have onboard LCD voltage generation
wim	32:59c4b8f648d4	1390	* Initial code for ST70XX imported from fork by JH1PJL
wim	32:59c4b8f648d4	1391	*
wim	32:59c4b8f648d4	1392	* @param unsigned char c contrast data (6 significant bits, valid range 0..63, Value 0 will disable the Vgen)
wim	32:59c4b8f648d4	1393	* @return none
wim	32:59c4b8f648d4	1394	*/
wim	32:59c4b8f648d4	1395	//@TODO Add support for 40x4 dual controller
wim	32:59c4b8f648d4	1396	void TextLCD_Base::setContrast(unsigned char c) {
wim	32:59c4b8f648d4	1397
wim	32:59c4b8f648d4	1398	// Function set mode stored during Init. Make sure we dont accidentally switch between 1-line and 2-line mode!
wim	32:59c4b8f648d4	1399	// Icon/Booster mode stored during Init. Make sure we dont accidentally change this!
wim	32:59c4b8f648d4	1400
wim	32:59c4b8f648d4	1401	_contrast = c & 0x3F; // Sanity check
wim	32:59c4b8f648d4	1402
wim	32:59c4b8f648d4	1403	switch (_ctrl) {
wim	32:59c4b8f648d4	1404
wim	32:59c4b8f648d4	1405	case PCF2113_3V3 :
wim	32:59c4b8f648d4	1406	case PCF2119_3V3 :
wim	32:59c4b8f648d4	1407	if (_contrast < 5) _contrast = 0; // See datasheet. Sanity check for PCF2113/PCF2119
wim	32:59c4b8f648d4	1408	if (_contrast > 55) _contrast = 55;
wim	32:59c4b8f648d4	1409
wim	32:59c4b8f648d4	1410	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instruction Set = 1
wim	32:59c4b8f648d4	1411	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
wim	32:59c4b8f648d4	1412	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
wim	32:59c4b8f648d4	1413	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	1414	break;
wim	32:59c4b8f648d4	1415
wim	32:59c4b8f648d4	1416	case ST7032_3V3 :
wim	32:59c4b8f648d4	1417	case ST7032_5V :
wim	32:59c4b8f648d4	1418	case ST7036_3V3 :
wim	32:59c4b8f648d4	1419	// case ST7036_5V :
wim	32:59c4b8f648d4	1420	case SSD1803_3V3 :
wim	32:59c4b8f648d4	1421	_writeCommand(0x20 \| _function \| 0x01); // Select Instruction Set = 1
wim	32:59c4b8f648d4	1422	_writeCommand(0x70 \| (_contrast & 0x0F)); // Contrast Low bits
wim	32:59c4b8f648d4	1423	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Contrast High bits
wim	32:59c4b8f648d4	1424	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	1425	break;
wim	32:59c4b8f648d4	1426
wim	32:59c4b8f648d4	1427	#if(0)
wim	32:59c4b8f648d4	1428	//not yet tested
wim	32:59c4b8f648d4	1429	case PT6314 :
wim	32:59c4b8f648d4	1430	// Only 2 significant bits
wim	32:59c4b8f648d4	1431	// 0x00 = 100%
wim	32:59c4b8f648d4	1432	// 0x01 = 75%
wim	32:59c4b8f648d4	1433	// 0x02 = 50%
wim	32:59c4b8f648d4	1434	// 0x03 = 25%
wim	32:59c4b8f648d4	1435	_writeCommand(0x20 \| _function \| ((~_contrast) >> 4)); // Invert and shift to use 2 MSBs
wim	32:59c4b8f648d4	1436	break;
wim	32:59c4b8f648d4	1437	#endif
wim	32:59c4b8f648d4	1438
wim	32:59c4b8f648d4	1439	default:
wim	32:59c4b8f648d4	1440	//Unsupported feature for other controllers
wim	32:59c4b8f648d4	1441	break;
wim	32:59c4b8f648d4	1442
wim	32:59c4b8f648d4	1443	} // end switch
wim	32:59c4b8f648d4	1444
wim	32:59c4b8f648d4	1445	}
wim	32:59c4b8f648d4	1446
wim	32:59c4b8f648d4	1447
wim	32:59c4b8f648d4	1448	/** Set Power
wim	32:59c4b8f648d4	1449	* setPower method is supported by some compatible devices (eg SSD1803) that have power down modes
wim	32:59c4b8f648d4	1450	*
wim	32:59c4b8f648d4	1451	* @param bool powerOn Power on/off
wim	32:59c4b8f648d4	1452	* @return none
wim	32:59c4b8f648d4	1453	*/
wim	32:59c4b8f648d4	1454	//@TODO Add support for 40x4 dual controller
wim	32:59c4b8f648d4	1455	void TextLCD_Base::setPower(bool powerOn) {
wim	32:59c4b8f648d4	1456	static int _tmp_contrast = LCD_DEF_CONTRAST;
wim	32:59c4b8f648d4	1457
wim	32:59c4b8f648d4	1458	if (powerOn) {
wim	32:59c4b8f648d4	1459	// Switch on
wim	32:59c4b8f648d4	1460	setMode(DispOn);
wim	32:59c4b8f648d4	1461
wim	32:59c4b8f648d4	1462	// Try to set contrast=0
wim	32:59c4b8f648d4	1463	_tmp_contrast = _contrast; // Temp. save current contrast
wim	32:59c4b8f648d4	1464	setContrast(0); // Contrast 0
wim	32:59c4b8f648d4	1465
wim	32:59c4b8f648d4	1466	// Controllers that supports specific Power Down mode
wim	32:59c4b8f648d4	1467	switch (_ctrl) {
wim	32:59c4b8f648d4	1468
wim	32:59c4b8f648d4	1469	// case PCF2113_3V3 :
wim	32:59c4b8f648d4	1470	// case PCF2119_3V3 :
wim	32:59c4b8f648d4	1471	// case ST7032_3V3 :
wim	32:59c4b8f648d4	1472	// case ST7032_5V :
wim	32:59c4b8f648d4	1473	//@todo
wim	32:59c4b8f648d4	1474
wim	32:59c4b8f648d4	1475	case SSD1803_3V3 :
wim	32:59c4b8f648d4	1476	// case SSD1803_5V :
wim	32:59c4b8f648d4	1477	_writeCommand(0x20 \| _function_1 \| 0x02); // Select Ext Instr Set
wim	32:59c4b8f648d4	1478	_writeCommand(0x03); // Power Down
wim	32:59c4b8f648d4	1479	_writeCommand(0x20 \| _function); // Select Std Instr Set
wim	32:59c4b8f648d4	1480	break;
wim	32:59c4b8f648d4	1481
wim	32:59c4b8f648d4	1482	case KS0078:
wim	32:59c4b8f648d4	1483	//@todo
wim	32:59c4b8f648d4	1484	break;
wim	32:59c4b8f648d4	1485
wim	32:59c4b8f648d4	1486	default:
wim	32:59c4b8f648d4	1487	//Unsupported feature for other controllers
wim	32:59c4b8f648d4	1488	break;
wim	32:59c4b8f648d4	1489	} // end switch
wim	32:59c4b8f648d4	1490	}
wim	32:59c4b8f648d4	1491	else {
wim	32:59c4b8f648d4	1492	// Switch off
wim	32:59c4b8f648d4	1493	setMode(DispOff);
wim	32:59c4b8f648d4	1494
wim	32:59c4b8f648d4	1495	// Try to restore contrast
wim	32:59c4b8f648d4	1496	setContrast(_tmp_contrast); // Contrast
wim	32:59c4b8f648d4	1497
wim	32:59c4b8f648d4	1498	// Controllers that support specific Power Down mode
wim	32:59c4b8f648d4	1499	switch (_ctrl) {
wim	32:59c4b8f648d4	1500
wim	32:59c4b8f648d4	1501	// case PCF2113_3V3 :
wim	32:59c4b8f648d4	1502	// case PCF2119_3V3 :
wim	32:59c4b8f648d4	1503	// case ST7032_3V3 :
wim	32:59c4b8f648d4	1504	// case ST7032_5V :
wim	32:59c4b8f648d4	1505	//@todo
wim	32:59c4b8f648d4	1506
wim	32:59c4b8f648d4	1507	case SSD1803_3V3 :
wim	32:59c4b8f648d4	1508	// case SSD1803_5V :
wim	32:59c4b8f648d4	1509	_writeCommand(0x20 \| _function_1 \| 0x02); // Select Ext Instr Set
wim	32:59c4b8f648d4	1510	_writeCommand(0x02); // Power On
wim	32:59c4b8f648d4	1511	_writeCommand(0x20 \| _function); // Select Std Instr Set
wim	32:59c4b8f648d4	1512	break;
wim	32:59c4b8f648d4	1513
wim	32:59c4b8f648d4	1514	case KS0078:
wim	32:59c4b8f648d4	1515	//@todo
wim	32:59c4b8f648d4	1516	break;
wim	32:59c4b8f648d4	1517
wim	32:59c4b8f648d4	1518	default:
wim	32:59c4b8f648d4	1519	//Unsupported feature for other controllers
wim	32:59c4b8f648d4	1520	break;
wim	32:59c4b8f648d4	1521	} // end switch
wim	32:59c4b8f648d4	1522
wim	32:59c4b8f648d4	1523	}
wim	32:59c4b8f648d4	1524
wim	32:59c4b8f648d4	1525	}
wim	32:59c4b8f648d4	1526
wim	23:d47f226efb24	1527	//--------- End TextLCD_Base -----------
wim	21:9eb628d9e164	1528
wim	22:35742ec80c24	1529
wim	23:d47f226efb24	1530	//--------- Start TextLCD Bus -----------
wim	21:9eb628d9e164	1531
wim	21:9eb628d9e164	1532	/* Create a TextLCD interface for using regular mbed pins
wim	21:9eb628d9e164	1533	*
wim	21:9eb628d9e164	1534	* @param rs Instruction/data control line
wim	21:9eb628d9e164	1535	* @param e Enable line (clock)
wim	21:9eb628d9e164	1536	* @param d4-d7 Data lines for using as a 4-bit interface
wim	21:9eb628d9e164	1537	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	1538	* @param bl Backlight control line (optional, default = NC)
wim	21:9eb628d9e164	1539	* @param e2 Enable2 line (clock for second controller, LCD40x4 only)
wim	21:9eb628d9e164	1540	* @param ctrl LCD controller (default = HD44780)
wim	21:9eb628d9e164	1541	*/
wim	21:9eb628d9e164	1542	TextLCD::TextLCD(PinName rs, PinName e,
wim	21:9eb628d9e164	1543	PinName d4, PinName d5, PinName d6, PinName d7,
wim	21:9eb628d9e164	1544	LCDType type, PinName bl, PinName e2, LCDCtrl ctrl) :
wim	21:9eb628d9e164	1545	TextLCD_Base(type, ctrl),
wim	22:35742ec80c24	1546	_rs(rs), _e(e), _d(d4, d5, d6, d7) {
wim	22:35742ec80c24	1547
wim	22:35742ec80c24	1548	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	22:35742ec80c24	1549	if (bl != NC) {
wim	22:35742ec80c24	1550	_bl = new DigitalOut(bl); //Construct new pin
wim	22:35742ec80c24	1551	_bl->write(0); //Deactivate
wim	22:35742ec80c24	1552	}
wim	22:35742ec80c24	1553	else {
wim	22:35742ec80c24	1554	// No Hardware Backlight pin
wim	22:35742ec80c24	1555	_bl = NULL; //Construct dummy pin
wim	22:35742ec80c24	1556	}
wim	22:35742ec80c24	1557
wim	22:35742ec80c24	1558	// The hardware Enable2 pin is only needed for LCD40x4. Test and make sure whether it exists or not to prevent illegal access.
wim	22:35742ec80c24	1559	if (e2 != NC) {
wim	22:35742ec80c24	1560	_e2 = new DigitalOut(e2); //Construct new pin
wim	22:35742ec80c24	1561	_e2->write(0); //Deactivate
wim	22:35742ec80c24	1562	}
wim	22:35742ec80c24	1563	else {
wim	22:35742ec80c24	1564	// No Hardware Enable pin
wim	22:35742ec80c24	1565	_e2 = NULL; //Construct dummy pin
wim	22:35742ec80c24	1566	}
wim	21:9eb628d9e164	1567
wim	21:9eb628d9e164	1568	_init();
wim	21:9eb628d9e164	1569	}
wim	21:9eb628d9e164	1570
wim	29:a3663151aa65	1571	/** Destruct a TextLCD interface for using regular mbed pins
wim	29:a3663151aa65	1572	*
wim	29:a3663151aa65	1573	* @param none
wim	29:a3663151aa65	1574	* @return none
wim	29:a3663151aa65	1575	*/
wim	29:a3663151aa65	1576	TextLCD::~TextLCD() {
wim	29:a3663151aa65	1577	if (_bl != NULL) {delete _bl;} // BL pin
wim	29:a3663151aa65	1578	if (_e2 != NULL) {delete _e2;} // E2 pin
wim	29:a3663151aa65	1579	}
wim	29:a3663151aa65	1580
wim	29:a3663151aa65	1581
wim	22:35742ec80c24	1582	/** Set E pin (or E2 pin)
wim	22:35742ec80c24	1583	* Used for mbed pins, I2C bus expander or SPI shiftregister
wim	22:35742ec80c24	1584	* Default PinName value for E2 is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
wim	22:35742ec80c24	1585	* @param value true or false
wim	22:35742ec80c24	1586	* @return none
wim	22:35742ec80c24	1587	*/
wim	21:9eb628d9e164	1588	void TextLCD::_setEnable(bool value) {
wim	21:9eb628d9e164	1589
wim	22:35742ec80c24	1590	if(_ctrl_idx==_LCDCtrl_0) {
wim	22:35742ec80c24	1591	if (value) {
wim	22:35742ec80c24	1592	_e = 1; // Set E bit
wim	22:35742ec80c24	1593	}
wim	22:35742ec80c24	1594	else {
wim	22:35742ec80c24	1595	_e = 0; // Reset E bit
wim	22:35742ec80c24	1596	}
wim	22:35742ec80c24	1597	}
wim	22:35742ec80c24	1598	else {
wim	22:35742ec80c24	1599	if (value) {
wim	22:35742ec80c24	1600	if (_e2 != NULL) {_e2->write(1);} //Set E2 bit
wim	22:35742ec80c24	1601	}
wim	22:35742ec80c24	1602	else {
wim	22:35742ec80c24	1603	if (_e2 != NULL) {_e2->write(0);} //Reset E2 bit
wim	22:35742ec80c24	1604	}
wim	22:35742ec80c24	1605	}
wim	21:9eb628d9e164	1606	}
wim	21:9eb628d9e164	1607
wim	21:9eb628d9e164	1608	// Set RS pin
wim	21:9eb628d9e164	1609	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	1610	void TextLCD::_setRS(bool value) {
wim	21:9eb628d9e164	1611
wim	22:35742ec80c24	1612	if (value) {
wim	21:9eb628d9e164	1613	_rs = 1; // Set RS bit
wim	22:35742ec80c24	1614	}
wim	22:35742ec80c24	1615	else {
wim	21:9eb628d9e164	1616	_rs = 0; // Reset RS bit
wim	22:35742ec80c24	1617	}
wim	21:9eb628d9e164	1618	}
wim	21:9eb628d9e164	1619
wim	22:35742ec80c24	1620	/** Set BL pin
wim	22:35742ec80c24	1621	* Used for mbed pins, I2C bus expander or SPI shiftregister
wim	22:35742ec80c24	1622	* Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
wim	22:35742ec80c24	1623	* @param value true or false
wim	22:35742ec80c24	1624	* @return none
wim	22:35742ec80c24	1625	*/
wim	21:9eb628d9e164	1626	void TextLCD::_setBL(bool value) {
wim	21:9eb628d9e164	1627
wim	22:35742ec80c24	1628	if (value) {
wim	22:35742ec80c24	1629	if (_bl != NULL) {_bl->write(1);} //Set BL bit
wim	22:35742ec80c24	1630	}
wim	22:35742ec80c24	1631	else {
wim	22:35742ec80c24	1632	if (_bl != NULL) {_bl->write(0);} //Reset BL bit
wim	22:35742ec80c24	1633	}
wim	21:9eb628d9e164	1634
wim	21:9eb628d9e164	1635	}
wim	21:9eb628d9e164	1636
wim	21:9eb628d9e164	1637	// Place the 4bit data on the databus
wim	21:9eb628d9e164	1638	// Used for mbed pins, I2C bus expander or SPI shifregister
wim	21:9eb628d9e164	1639	void TextLCD::_setData(int value) {
wim	21:9eb628d9e164	1640	_d = value & 0x0F; // Write Databits
wim	21:9eb628d9e164	1641	}
wim	22:35742ec80c24	1642
wim	23:d47f226efb24	1643	//----------- End TextLCD ---------------
wim	21:9eb628d9e164	1644
wim	21:9eb628d9e164	1645
wim	23:d47f226efb24	1646	//--------- Start TextLCD_I2C -----------
wim	22:35742ec80c24	1647
wim	26:bd897a001012	1648	/** Create a TextLCD interface using an I2C PC8574 (or PCF8574A) or MCP23008 portexpander
wim	22:35742ec80c24	1649	*
wim	22:35742ec80c24	1650	* @param i2c I2C Bus
wim	26:bd897a001012	1651	* @param deviceAddress I2C slave address (PCF8574, PCF8574A or MCP23008, default = 0x40)
wim	22:35742ec80c24	1652	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	22:35742ec80c24	1653	* @param ctrl LCD controller (default = HD44780)
wim	22:35742ec80c24	1654	*/
wim	21:9eb628d9e164	1655	TextLCD_I2C::TextLCD_I2C(I2C *i2c, char deviceAddress, LCDType type, LCDCtrl ctrl) :
wim	21:9eb628d9e164	1656	TextLCD_Base(type, ctrl),
wim	21:9eb628d9e164	1657	_i2c(i2c){
wim	21:9eb628d9e164	1658
wim	22:35742ec80c24	1659	_slaveAddress = deviceAddress & 0xFE;
wim	28:30fa94f7341c	1660
wim	28:30fa94f7341c	1661	// Setup the I2C bus
wim	28:30fa94f7341c	1662	// The max bitrate for PCF8574 is 100kbit, the max bitrate for MCP23008 is 400kbit,
wim	32:59c4b8f648d4	1663	_i2c->frequency(100000);
wim	21:9eb628d9e164	1664
wim	26:bd897a001012	1665	#if (MCP23008==1)
wim	26:bd897a001012	1666	// MCP23008 portexpander Init
wim	27:22d5086f6ba6	1667	_write_register(IODIR, 0x00); // All outputs
wim	27:22d5086f6ba6	1668	_write_register(IPOL, 0x00); // No reverse polarity
wim	27:22d5086f6ba6	1669	_write_register(GPINTEN, 0x00); // No interrupt
wim	27:22d5086f6ba6	1670	_write_register(DEFVAL, 0x00); // Default value to compare against for interrupts
wim	27:22d5086f6ba6	1671	_write_register(INTCON, 0x00); // No interrupt on changes
wim	27:22d5086f6ba6	1672	_write_register(IOCON, 0x00); // Interrupt polarity
wim	27:22d5086f6ba6	1673	_write_register(GPPU, 0x00); // No Pullup
wim	27:22d5086f6ba6	1674	_write_register(INTF, 0x00); //
wim	27:22d5086f6ba6	1675	_write_register(INTCAP, 0x00); //
wim	27:22d5086f6ba6	1676	_write_register(GPIO, 0x00); // Output/Input pins
wim	27:22d5086f6ba6	1677	_write_register(OLAT, 0x00); // Output Latch
wim	26:bd897a001012	1678
wim	21:9eb628d9e164	1679	// Init the portexpander bus
wim	21:9eb628d9e164	1680	_lcd_bus = D_LCD_BUS_DEF;
wim	21:9eb628d9e164	1681
wim	21:9eb628d9e164	1682	// write the new data to the portexpander
wim	26:bd897a001012	1683	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	1684	#else
wim	26:bd897a001012	1685	// PCF8574 of PCF8574A portexpander
wim	26:bd897a001012	1686
wim	26:bd897a001012	1687	// Init the portexpander bus
wim	26:bd897a001012	1688	_lcd_bus = D_LCD_BUS_DEF;
wim	26:bd897a001012	1689
wim	26:bd897a001012	1690	// write the new data to the portexpander
wim	21:9eb628d9e164	1691	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	26:bd897a001012	1692	#endif
wim	21:9eb628d9e164	1693
wim	30:033048611c01	1694	_init();
wim	21:9eb628d9e164	1695	}
wim	21:9eb628d9e164	1696
wim	21:9eb628d9e164	1697	// Set E pin (or E2 pin)
wim	21:9eb628d9e164	1698	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	1699	void TextLCD_I2C::_setEnable(bool value) {
wim	21:9eb628d9e164	1700
wim	22:35742ec80c24	1701	if(_ctrl_idx==_LCDCtrl_0) {
wim	26:bd897a001012	1702	if (value) {
wim	22:35742ec80c24	1703	_lcd_bus \|= D_LCD_E; // Set E bit
wim	26:bd897a001012	1704	}
wim	26:bd897a001012	1705	else {
wim	22:35742ec80c24	1706	_lcd_bus &= ~D_LCD_E; // Reset E bit
wim	26:bd897a001012	1707	}
wim	22:35742ec80c24	1708	}
wim	22:35742ec80c24	1709	else {
wim	26:bd897a001012	1710	if (value) {
wim	22:35742ec80c24	1711	_lcd_bus \|= D_LCD_E2; // Set E2 bit
wim	26:bd897a001012	1712	}
wim	26:bd897a001012	1713	else {
wim	22:35742ec80c24	1714	_lcd_bus &= ~D_LCD_E2; // Reset E2bit
wim	26:bd897a001012	1715	}
wim	26:bd897a001012	1716	}
wim	26:bd897a001012	1717
wim	26:bd897a001012	1718	#if (MCP23008==1)
wim	26:bd897a001012	1719	// MCP23008 portexpander
wim	26:bd897a001012	1720
wim	26:bd897a001012	1721	// write the new data to the portexpander
wim	26:bd897a001012	1722	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	1723	#else
wim	26:bd897a001012	1724	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	1725
wim	22:35742ec80c24	1726	// write the new data to the I2C portexpander
wim	22:35742ec80c24	1727	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	26:bd897a001012	1728	#endif
wim	21:9eb628d9e164	1729	}
wim	21:9eb628d9e164	1730
wim	21:9eb628d9e164	1731	// Set RS pin
wim	21:9eb628d9e164	1732	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	1733	void TextLCD_I2C::_setRS(bool value) {
wim	21:9eb628d9e164	1734
wim	26:bd897a001012	1735	if (value) {
wim	22:35742ec80c24	1736	_lcd_bus \|= D_LCD_RS; // Set RS bit
wim	26:bd897a001012	1737	}
wim	26:bd897a001012	1738	else {
wim	22:35742ec80c24	1739	_lcd_bus &= ~D_LCD_RS; // Reset RS bit
wim	26:bd897a001012	1740	}
wim	26:bd897a001012	1741
wim	26:bd897a001012	1742	#if (MCP23008==1)
wim	26:bd897a001012	1743	// MCP23008 portexpander
wim	26:bd897a001012	1744
wim	26:bd897a001012	1745	// write the new data to the portexpander
wim	26:bd897a001012	1746	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	1747	#else
wim	26:bd897a001012	1748	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	1749
wim	22:35742ec80c24	1750	// write the new data to the I2C portexpander
wim	22:35742ec80c24	1751	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	30:033048611c01	1752	#endif
wim	21:9eb628d9e164	1753	}
wim	21:9eb628d9e164	1754
wim	21:9eb628d9e164	1755	// Set BL pin
wim	21:9eb628d9e164	1756	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	1757	void TextLCD_I2C::_setBL(bool value) {
wim	21:9eb628d9e164	1758
wim	26:bd897a001012	1759	if (value) {
wim	21:9eb628d9e164	1760	_lcd_bus \|= D_LCD_BL; // Set BL bit
wim	26:bd897a001012	1761	}
wim	26:bd897a001012	1762	else {
wim	21:9eb628d9e164	1763	_lcd_bus &= ~D_LCD_BL; // Reset BL bit
wim	26:bd897a001012	1764	}
wim	26:bd897a001012	1765
wim	26:bd897a001012	1766	#if (MCP23008==1)
wim	26:bd897a001012	1767	// MCP23008 portexpander
wim	26:bd897a001012	1768
wim	26:bd897a001012	1769	// write the new data to the portexpander
wim	26:bd897a001012	1770	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	1771	#else
wim	26:bd897a001012	1772	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	1773
wim	21:9eb628d9e164	1774	// write the new data to the I2C portexpander
wim	21:9eb628d9e164	1775	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	30:033048611c01	1776	#endif
wim	21:9eb628d9e164	1777	}
wim	21:9eb628d9e164	1778
wim	21:9eb628d9e164	1779
wim	21:9eb628d9e164	1780	// Place the 4bit data on the databus
wim	21:9eb628d9e164	1781	// Used for mbed pins, I2C bus expander or SPI shifregister
wim	21:9eb628d9e164	1782	void TextLCD_I2C::_setData(int value) {
wim	21:9eb628d9e164	1783	int data;
wim	22:35742ec80c24	1784
wim	22:35742ec80c24	1785	// Set bit by bit to support any mapping of expander portpins to LCD pins
wim	21:9eb628d9e164	1786
wim	22:35742ec80c24	1787	data = value & 0x0F;
wim	26:bd897a001012	1788	if (data & 0x01){
wim	22:35742ec80c24	1789	_lcd_bus \|= D_LCD_D4; // Set Databit
wim	26:bd897a001012	1790	}
wim	26:bd897a001012	1791	else {
wim	26:bd897a001012	1792	_lcd_bus &= ~D_LCD_D4; // Reset Databit
wim	26:bd897a001012	1793	}
wim	21:9eb628d9e164	1794
wim	26:bd897a001012	1795	if (data & 0x02){
wim	22:35742ec80c24	1796	_lcd_bus \|= D_LCD_D5; // Set Databit
wim	26:bd897a001012	1797	}
wim	26:bd897a001012	1798	else {
wim	26:bd897a001012	1799	_lcd_bus &= ~D_LCD_D5; // Reset Databit
wim	26:bd897a001012	1800	}
wim	21:9eb628d9e164	1801
wim	26:bd897a001012	1802	if (data & 0x04) {
wim	22:35742ec80c24	1803	_lcd_bus \|= D_LCD_D6; // Set Databit
wim	26:bd897a001012	1804	}
wim	26:bd897a001012	1805	else {
wim	26:bd897a001012	1806	_lcd_bus &= ~D_LCD_D6; // Reset Databit
wim	26:bd897a001012	1807	}
wim	21:9eb628d9e164	1808
wim	26:bd897a001012	1809	if (data & 0x08) {
wim	22:35742ec80c24	1810	_lcd_bus \|= D_LCD_D7; // Set Databit
wim	26:bd897a001012	1811	}
wim	26:bd897a001012	1812	else {
wim	26:bd897a001012	1813	_lcd_bus &= ~D_LCD_D7; // Reset Databit
wim	26:bd897a001012	1814	}
wim	21:9eb628d9e164	1815
wim	26:bd897a001012	1816	#if (MCP23008==1)
wim	26:bd897a001012	1817	// MCP23008 portexpander
wim	26:bd897a001012	1818
wim	26:bd897a001012	1819	// write the new data to the portexpander
wim	26:bd897a001012	1820	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	1821	#else
wim	26:bd897a001012	1822	// PCF8574 of PCF8574A portexpander
wim	26:bd897a001012	1823
wim	22:35742ec80c24	1824	// write the new data to the I2C portexpander
wim	26:bd897a001012	1825	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	26:bd897a001012	1826	#endif
wim	22:35742ec80c24	1827
wim	22:35742ec80c24	1828	}
wim	21:9eb628d9e164	1829
wim	26:bd897a001012	1830	// Write data to MCP23008 I2C portexpander
wim	26:bd897a001012	1831	void TextLCD_I2C::_write_register (int reg, int value) {
wim	26:bd897a001012	1832	char data[] = {reg, value};
wim	26:bd897a001012	1833
wim	30:033048611c01	1834	_i2c->write(_slaveAddress, data, 2);
wim	26:bd897a001012	1835	}
wim	26:bd897a001012	1836
wim	23:d47f226efb24	1837	//---------- End TextLCD_I2C ------------
wim	21:9eb628d9e164	1838
wim	21:9eb628d9e164	1839
wim	28:30fa94f7341c	1840	//--------- Start TextLCD_I2C_N ---------
wim	28:30fa94f7341c	1841
wim	28:30fa94f7341c	1842	/** Create a TextLCD interface using a controller with native I2C interface
wim	28:30fa94f7341c	1843	*
wim	28:30fa94f7341c	1844	* @param i2c I2C Bus
wim	28:30fa94f7341c	1845	* @param deviceAddress I2C slave address (default = 0x7C)
wim	28:30fa94f7341c	1846	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	28:30fa94f7341c	1847	* @param bl Backlight control line (optional, default = NC)
wim	28:30fa94f7341c	1848	* @param ctrl LCD controller (default = ST7032_3V3)
wim	28:30fa94f7341c	1849	*/
wim	28:30fa94f7341c	1850	TextLCD_I2C_N::TextLCD_I2C_N(I2C *i2c, char deviceAddress, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	28:30fa94f7341c	1851	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	1852
wim	32:59c4b8f648d4	1853	// _i2c(i2c){
wim	32:59c4b8f648d4	1854	_i2c(i2c), _ps(p20) {
wim	32:59c4b8f648d4	1855	//Test
wim	32:59c4b8f648d4	1856	// Init PS
wim	32:59c4b8f648d4	1857	wait_us(500);
wim	32:59c4b8f648d4	1858	_ps = 0;
wim	32:59c4b8f648d4	1859	wait_us(250);
wim	32:59c4b8f648d4	1860
wim	30:033048611c01	1861
wim	28:30fa94f7341c	1862	_slaveAddress = deviceAddress & 0xFE;
wim	28:30fa94f7341c	1863
wim	28:30fa94f7341c	1864	// Setup the I2C bus
wim	29:a3663151aa65	1865	// The max bitrate for ST7032i is 400kbit, lets stick to default here
wim	29:a3663151aa65	1866	_i2c->frequency(100000);
wim	32:59c4b8f648d4	1867
wim	30:033048611c01	1868
wim	28:30fa94f7341c	1869	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	28:30fa94f7341c	1870	if (bl != NC) {
wim	28:30fa94f7341c	1871	_bl = new DigitalOut(bl); //Construct new pin
wim	28:30fa94f7341c	1872	_bl->write(0); //Deactivate
wim	28:30fa94f7341c	1873	}
wim	28:30fa94f7341c	1874	else {
wim	28:30fa94f7341c	1875	// No Hardware Backlight pin
wim	28:30fa94f7341c	1876	_bl = NULL; //Construct dummy pin
wim	28:30fa94f7341c	1877	}
wim	28:30fa94f7341c	1878
wim	30:033048611c01	1879	//Sanity check
wim	30:033048611c01	1880	if (_ctrl & LCD_C_I2C) {
wim	30:033048611c01	1881	_init();
wim	30:033048611c01	1882	}
wim	30:033048611c01	1883	else {
wim	30:033048611c01	1884	error("Error: LCD Controller type does not support native I2C interface\n\r");
wim	30:033048611c01	1885	}
wim	30:033048611c01	1886
wim	28:30fa94f7341c	1887	}
wim	28:30fa94f7341c	1888
wim	28:30fa94f7341c	1889	TextLCD_I2C_N::~TextLCD_I2C_N() {
wim	28:30fa94f7341c	1890	if (_bl != NULL) {delete _bl;} // BL pin
wim	28:30fa94f7341c	1891	}
wim	28:30fa94f7341c	1892
wim	28:30fa94f7341c	1893	// Not used in this mode
wim	28:30fa94f7341c	1894	void TextLCD_I2C_N::_setEnable(bool value) {
wim	28:30fa94f7341c	1895	}
wim	28:30fa94f7341c	1896
wim	28:30fa94f7341c	1897	// Set RS pin
wim	28:30fa94f7341c	1898	// Used for mbed pins, I2C bus expander or SPI shiftregister and native I2C or SPI
wim	28:30fa94f7341c	1899	void TextLCD_I2C_N::_setRS(bool value) {
wim	30:033048611c01	1900	// The controlbyte defines the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	1901	// Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop
wim	30:033048611c01	1902	// Co RS RW 0 0 0 0 0 command or data
wim	30:033048611c01	1903	//
wim	30:033048611c01	1904	// C0=1 indicates that another controlbyte will follow after the next data or command byte
wim	30:033048611c01	1905	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	1906	// RW=0 means write to controller. RW=1 means that controller will be read from after the next command.
wim	30:033048611c01	1907	// Many native I2C controllers dont support this option and it is not used by this lib.
wim	30:033048611c01	1908	//
wim	30:033048611c01	1909
wim	28:30fa94f7341c	1910	if (value) {
wim	28:30fa94f7341c	1911	_controlbyte = 0x40; // Next byte is data, No more control bytes will follow
wim	28:30fa94f7341c	1912	}
wim	28:30fa94f7341c	1913	else {
wim	28:30fa94f7341c	1914	_controlbyte = 0x00; // Next byte is command, No more control bytes will follow
wim	28:30fa94f7341c	1915	}
wim	28:30fa94f7341c	1916	}
wim	28:30fa94f7341c	1917
wim	28:30fa94f7341c	1918	// Set BL pin
wim	28:30fa94f7341c	1919	void TextLCD_I2C_N::_setBL(bool value) {
wim	28:30fa94f7341c	1920	if (_bl) {
wim	28:30fa94f7341c	1921	_bl->write(value);
wim	28:30fa94f7341c	1922	}
wim	28:30fa94f7341c	1923	}
wim	29:a3663151aa65	1924
wim	29:a3663151aa65	1925	// Not used in this mode
wim	29:a3663151aa65	1926	void TextLCD_I2C_N::_setData(int value) {
wim	29:a3663151aa65	1927	}
wim	29:a3663151aa65	1928
wim	28:30fa94f7341c	1929	// Write a byte using I2C
wim	28:30fa94f7341c	1930	void TextLCD_I2C_N::_writeByte(int value) {
wim	30:033048611c01	1931	// The controlbyte defines the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	1932	// Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop
wim	30:033048611c01	1933	// Co RS RW 0 0 0 0 0 command or data
wim	30:033048611c01	1934	//
wim	30:033048611c01	1935	// C0=1 indicates that another controlbyte will follow after the next data or command byte
wim	30:033048611c01	1936	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	1937	// RW=0 means write to controller. RW=1 means that controller will be read from after the next command.
wim	30:033048611c01	1938	// Many native I2C controllers dont support this option and it is not used by this lib.
wim	30:033048611c01	1939	//
wim	28:30fa94f7341c	1940	char data[] = {_controlbyte, value};
wim	28:30fa94f7341c	1941
wim	32:59c4b8f648d4	1942	#if(LCD_I2C_ACK==1)
wim	32:59c4b8f648d4	1943	//Controllers that support ACK
wim	30:033048611c01	1944	_i2c->write(_slaveAddress, data, 2);
wim	32:59c4b8f648d4	1945	#else
wim	32:59c4b8f648d4	1946	//Controllers that dont support ACK
wim	32:59c4b8f648d4	1947	_i2c->start();
wim	32:59c4b8f648d4	1948	_i2c->write(_slaveAddress);
wim	32:59c4b8f648d4	1949	_i2c->write(data[0]);
wim	32:59c4b8f648d4	1950	_i2c->write(data[1]);
wim	32:59c4b8f648d4	1951	_i2c->stop();
wim	32:59c4b8f648d4	1952	#endif
wim	28:30fa94f7341c	1953	}
wim	28:30fa94f7341c	1954
wim	28:30fa94f7341c	1955	//-------- End TextLCD_I2C_N ------------
wim	28:30fa94f7341c	1956
wim	28:30fa94f7341c	1957
wim	23:d47f226efb24	1958	//--------- Start TextLCD_SPI -----------
wim	21:9eb628d9e164	1959
wim	22:35742ec80c24	1960	/** Create a TextLCD interface using an SPI 74595 portexpander
wim	22:35742ec80c24	1961	*
wim	22:35742ec80c24	1962	* @param spi SPI Bus
wim	22:35742ec80c24	1963	* @param cs chip select pin (active low)
wim	22:35742ec80c24	1964	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	22:35742ec80c24	1965	* @param ctrl LCD controller (default = HD44780)
wim	22:35742ec80c24	1966	*/
wim	21:9eb628d9e164	1967	TextLCD_SPI::TextLCD_SPI(SPI *spi, PinName cs, LCDType type, LCDCtrl ctrl) :
wim	21:9eb628d9e164	1968	TextLCD_Base(type, ctrl),
wim	21:9eb628d9e164	1969	_spi(spi),
wim	21:9eb628d9e164	1970	_cs(cs) {
wim	21:9eb628d9e164	1971
wim	32:59c4b8f648d4	1972	// Init cs
wim	32:59c4b8f648d4	1973	_setCS(true);
wim	32:59c4b8f648d4	1974
wim	21:9eb628d9e164	1975	// Setup the spi for 8 bit data, low steady state clock,
wim	21:9eb628d9e164	1976	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	21:9eb628d9e164	1977	_spi->format(8,0);
wim	21:9eb628d9e164	1978	_spi->frequency(500000);
wim	21:9eb628d9e164	1979	//_spi.frequency(1000000);
wim	21:9eb628d9e164	1980
wim	21:9eb628d9e164	1981	// Init the portexpander bus
wim	21:9eb628d9e164	1982	_lcd_bus = D_LCD_BUS_DEF;
wim	21:9eb628d9e164	1983
wim	21:9eb628d9e164	1984	// write the new data to the portexpander
wim	21:9eb628d9e164	1985	_setCS(false);
wim	21:9eb628d9e164	1986	_spi->write(_lcd_bus);
wim	21:9eb628d9e164	1987	_setCS(true);
wim	30:033048611c01	1988
wim	30:033048611c01	1989	_init();
wim	21:9eb628d9e164	1990	}
wim	21:9eb628d9e164	1991
wim	21:9eb628d9e164	1992	// Set E pin (or E2 pin)
wim	21:9eb628d9e164	1993	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	1994	void TextLCD_SPI::_setEnable(bool value) {
wim	21:9eb628d9e164	1995
wim	22:35742ec80c24	1996	if(_ctrl_idx==_LCDCtrl_0) {
wim	26:bd897a001012	1997	if (value) {
wim	22:35742ec80c24	1998	_lcd_bus \|= D_LCD_E; // Set E bit
wim	26:bd897a001012	1999	}
wim	26:bd897a001012	2000	else {
wim	22:35742ec80c24	2001	_lcd_bus &= ~D_LCD_E; // Reset E bit
wim	26:bd897a001012	2002	}
wim	22:35742ec80c24	2003	}
wim	22:35742ec80c24	2004	else {
wim	26:bd897a001012	2005	if (value) {
wim	22:35742ec80c24	2006	_lcd_bus \|= D_LCD_E2; // Set E2 bit
wim	26:bd897a001012	2007	}
wim	26:bd897a001012	2008	else {
wim	22:35742ec80c24	2009	_lcd_bus &= ~D_LCD_E2; // Reset E2 bit
wim	26:bd897a001012	2010	}
wim	22:35742ec80c24	2011	}
wim	21:9eb628d9e164	2012
wim	22:35742ec80c24	2013	// write the new data to the SPI portexpander
wim	22:35742ec80c24	2014	_setCS(false);
wim	22:35742ec80c24	2015	_spi->write(_lcd_bus);
wim	30:033048611c01	2016	_setCS(true);
wim	21:9eb628d9e164	2017	}
wim	21:9eb628d9e164	2018
wim	21:9eb628d9e164	2019	// Set RS pin
wim	21:9eb628d9e164	2020	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2021	void TextLCD_SPI::_setRS(bool value) {
wim	21:9eb628d9e164	2022
wim	22:35742ec80c24	2023	if (value) {
wim	21:9eb628d9e164	2024	_lcd_bus \|= D_LCD_RS; // Set RS bit
wim	22:35742ec80c24	2025	}
wim	22:35742ec80c24	2026	else {
wim	21:9eb628d9e164	2027	_lcd_bus &= ~D_LCD_RS; // Reset RS bit
wim	22:35742ec80c24	2028	}
wim	21:9eb628d9e164	2029
wim	21:9eb628d9e164	2030	// write the new data to the SPI portexpander
wim	21:9eb628d9e164	2031	_setCS(false);
wim	21:9eb628d9e164	2032	_spi->write(_lcd_bus);
wim	21:9eb628d9e164	2033	_setCS(true);
wim	21:9eb628d9e164	2034	}
wim	21:9eb628d9e164	2035
wim	21:9eb628d9e164	2036	// Set BL pin
wim	21:9eb628d9e164	2037	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2038	void TextLCD_SPI::_setBL(bool value) {
wim	21:9eb628d9e164	2039
wim	22:35742ec80c24	2040	if (value) {
wim	21:9eb628d9e164	2041	_lcd_bus \|= D_LCD_BL; // Set BL bit
wim	22:35742ec80c24	2042	}
wim	22:35742ec80c24	2043	else {
wim	21:9eb628d9e164	2044	_lcd_bus &= ~D_LCD_BL; // Reset BL bit
wim	22:35742ec80c24	2045	}
wim	21:9eb628d9e164	2046
wim	21:9eb628d9e164	2047	// write the new data to the SPI portexpander
wim	21:9eb628d9e164	2048	_setCS(false);
wim	21:9eb628d9e164	2049	_spi->write(_lcd_bus);
wim	30:033048611c01	2050	_setCS(true);
wim	21:9eb628d9e164	2051	}
wim	21:9eb628d9e164	2052
wim	21:9eb628d9e164	2053	// Place the 4bit data on the databus
wim	21:9eb628d9e164	2054	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2055	void TextLCD_SPI::_setData(int value) {
wim	21:9eb628d9e164	2056	int data;
wim	21:9eb628d9e164	2057
wim	22:35742ec80c24	2058	// Set bit by bit to support any mapping of expander portpins to LCD pins
wim	22:35742ec80c24	2059
wim	22:35742ec80c24	2060	data = value & 0x0F;
wim	26:bd897a001012	2061	if (data & 0x01) {
wim	22:35742ec80c24	2062	_lcd_bus \|= D_LCD_D4; // Set Databit
wim	26:bd897a001012	2063	}
wim	26:bd897a001012	2064	else {
wim	22:35742ec80c24	2065	_lcd_bus &= ~D_LCD_D4; // Reset Databit
wim	26:bd897a001012	2066	}
wim	26:bd897a001012	2067
wim	26:bd897a001012	2068	if (data & 0x02) {
wim	22:35742ec80c24	2069	_lcd_bus \|= D_LCD_D5; // Set Databit
wim	26:bd897a001012	2070	}
wim	26:bd897a001012	2071	else {
wim	22:35742ec80c24	2072	_lcd_bus &= ~D_LCD_D5; // Reset Databit
wim	26:bd897a001012	2073	}
wim	26:bd897a001012	2074
wim	26:bd897a001012	2075	if (data & 0x04) {
wim	22:35742ec80c24	2076	_lcd_bus \|= D_LCD_D6; // Set Databit
wim	26:bd897a001012	2077	}
wim	26:bd897a001012	2078	else {
wim	22:35742ec80c24	2079	_lcd_bus &= ~D_LCD_D6; // Reset Databit
wim	26:bd897a001012	2080	}
wim	26:bd897a001012	2081
wim	26:bd897a001012	2082	if (data & 0x08) {
wim	22:35742ec80c24	2083	_lcd_bus \|= D_LCD_D7; // Set Databit
wim	26:bd897a001012	2084	}
wim	26:bd897a001012	2085	else {
wim	26:bd897a001012	2086	_lcd_bus &= ~D_LCD_D7; // Reset Databit
wim	26:bd897a001012	2087	}
wim	21:9eb628d9e164	2088
wim	22:35742ec80c24	2089	// write the new data to the SPI portexpander
wim	22:35742ec80c24	2090	_setCS(false);
wim	22:35742ec80c24	2091	_spi->write(_lcd_bus);
wim	30:033048611c01	2092	_setCS(true);
wim	21:9eb628d9e164	2093	}
wim	21:9eb628d9e164	2094
wim	21:9eb628d9e164	2095	// Set CS line.
wim	21:9eb628d9e164	2096	// Only used for SPI bus
wim	21:9eb628d9e164	2097	void TextLCD_SPI::_setCS(bool value) {
wim	21:9eb628d9e164	2098
wim	21:9eb628d9e164	2099	if (value) {
wim	21:9eb628d9e164	2100	_cs = 1; // Set CS pin
wim	21:9eb628d9e164	2101	}
wim	22:35742ec80c24	2102	else {
wim	21:9eb628d9e164	2103	_cs = 0; // Reset CS pin
wim	22:35742ec80c24	2104	}
wim	21:9eb628d9e164	2105	}
wim	21:9eb628d9e164	2106
wim	23:d47f226efb24	2107	//---------- End TextLCD_SPI ------------
wim	22:35742ec80c24	2108
wim	22:35742ec80c24	2109
wim	25:6162b31128c9	2110	//--------- Start TextLCD_SPI_N ---------
Sissors	24:fb3399713710	2111
wim	30:033048611c01	2112	/** Create a TextLCD interface using a controller with a native SPI4 interface
Sissors	24:fb3399713710	2113	*
Sissors	24:fb3399713710	2114	* @param spi SPI Bus
Sissors	24:fb3399713710	2115	* @param cs chip select pin (active low)
wim	25:6162b31128c9	2116	* @param rs Instruction/data control line
Sissors	24:fb3399713710	2117	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	25:6162b31128c9	2118	* @param bl Backlight control line (optional, default = NC)
wim	26:bd897a001012	2119	* @param ctrl LCD controller (default = ST7032_3V3)
wim	25:6162b31128c9	2120	*/
wim	25:6162b31128c9	2121	TextLCD_SPI_N::TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	25:6162b31128c9	2122	TextLCD_Base(type, ctrl),
wim	25:6162b31128c9	2123	_spi(spi),
wim	25:6162b31128c9	2124	_cs(cs),
wim	25:6162b31128c9	2125	_rs(rs) {
Sissors	24:fb3399713710	2126
wim	32:59c4b8f648d4	2127	// Init CS
wim	32:59c4b8f648d4	2128	_cs = 1;
wim	32:59c4b8f648d4	2129
Sissors	24:fb3399713710	2130	// Setup the spi for 8 bit data, low steady state clock,
Sissors	24:fb3399713710	2131	// rising edge capture, with a 500KHz or 1MHz clock rate
Sissors	24:fb3399713710	2132	_spi->format(8,0);
Sissors	24:fb3399713710	2133	_spi->frequency(1000000);
Sissors	24:fb3399713710	2134
Sissors	24:fb3399713710	2135	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
Sissors	24:fb3399713710	2136	if (bl != NC) {
Sissors	24:fb3399713710	2137	_bl = new DigitalOut(bl); //Construct new pin
Sissors	24:fb3399713710	2138	_bl->write(0); //Deactivate
Sissors	24:fb3399713710	2139	}
Sissors	24:fb3399713710	2140	else {
Sissors	24:fb3399713710	2141	// No Hardware Backlight pin
Sissors	24:fb3399713710	2142	_bl = NULL; //Construct dummy pin
Sissors	24:fb3399713710	2143	}
wim	30:033048611c01	2144
wim	30:033048611c01	2145	//Sanity check
wim	30:033048611c01	2146	if (_ctrl & LCD_C_SPI4) {
wim	30:033048611c01	2147	_init();
wim	30:033048611c01	2148	}
wim	30:033048611c01	2149	else {
wim	30:033048611c01	2150	error("Error: LCD Controller type does not support native SPI4 interface\n\r");
wim	30:033048611c01	2151	}
Sissors	24:fb3399713710	2152	}
Sissors	24:fb3399713710	2153
wim	25:6162b31128c9	2154	TextLCD_SPI_N::~TextLCD_SPI_N() {
Sissors	24:fb3399713710	2155	if (_bl != NULL) {delete _bl;} // BL pin
Sissors	24:fb3399713710	2156	}
Sissors	24:fb3399713710	2157
Sissors	24:fb3399713710	2158	// Not used in this mode
wim	25:6162b31128c9	2159	void TextLCD_SPI_N::_setEnable(bool value) {
Sissors	24:fb3399713710	2160	}
Sissors	24:fb3399713710	2161
Sissors	24:fb3399713710	2162	// Set RS pin
Sissors	24:fb3399713710	2163	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	25:6162b31128c9	2164	void TextLCD_SPI_N::_setRS(bool value) {
Sissors	24:fb3399713710	2165	_rs = value;
Sissors	24:fb3399713710	2166	}
Sissors	24:fb3399713710	2167
Sissors	24:fb3399713710	2168	// Set BL pin
wim	25:6162b31128c9	2169	void TextLCD_SPI_N::_setBL(bool value) {
wim	26:bd897a001012	2170	if (_bl) {
Sissors	24:fb3399713710	2171	_bl->write(value);
wim	26:bd897a001012	2172	}
Sissors	24:fb3399713710	2173	}
Sissors	24:fb3399713710	2174
wim	29:a3663151aa65	2175	// Not used in this mode
wim	29:a3663151aa65	2176	void TextLCD_SPI_N::_setData(int value) {
wim	29:a3663151aa65	2177	}
wim	29:a3663151aa65	2178
Sissors	24:fb3399713710	2179	// Write a byte using SPI
wim	25:6162b31128c9	2180	void TextLCD_SPI_N::_writeByte(int value) {
Sissors	24:fb3399713710	2181	_cs = 0;
Sissors	24:fb3399713710	2182	wait_us(1);
Sissors	24:fb3399713710	2183	_spi->write(value);
Sissors	24:fb3399713710	2184	wait_us(1);
Sissors	24:fb3399713710	2185	_cs = 1;
Sissors	24:fb3399713710	2186	}
wim	30:033048611c01	2187
wim	25:6162b31128c9	2188	//-------- End TextLCD_SPI_N ------------
wim	21:9eb628d9e164	2189
wim	21:9eb628d9e164	2190
wim	21:9eb628d9e164	2191
wim	32:59c4b8f648d4	2192	#if(1)
wim	30:033048611c01	2193	//Code checked out on logic analyser. Not yet tested on hardware..
wim	30:033048611c01	2194
wim	30:033048611c01	2195	//-------- Start TextLCD_SPI_N_3_9 --------
wim	30:033048611c01	2196
wim	30:033048611c01	2197	/** Create a TextLCD interface using a controller with a native SPI3 9 bits interface
wim	30:033048611c01	2198	*
wim	30:033048611c01	2199	* @param spi SPI Bus
wim	30:033048611c01	2200	* @param cs chip select pin (active low)
wim	30:033048611c01	2201	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	30:033048611c01	2202	* @param bl Backlight control line (optional, default = NC)
wim	30:033048611c01	2203	* @param ctrl LCD controller (default = AIP31068)
wim	30:033048611c01	2204	*/
wim	30:033048611c01	2205	TextLCD_SPI_N_3_9::TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	30:033048611c01	2206	TextLCD_Base(type, ctrl),
wim	30:033048611c01	2207	_spi(spi),
wim	32:59c4b8f648d4	2208	// _cs(cs) {
wim	32:59c4b8f648d4	2209
wim	32:59c4b8f648d4	2210	_cs(cs), _ps(p20) {
wim	32:59c4b8f648d4	2211
wim	32:59c4b8f648d4	2212	// Init PS
wim	32:59c4b8f648d4	2213	wait_us(500);
wim	32:59c4b8f648d4	2214	_ps = 0;
wim	32:59c4b8f648d4	2215	wait_us(250);
wim	32:59c4b8f648d4	2216
wim	32:59c4b8f648d4	2217	// Init CS
wim	32:59c4b8f648d4	2218	_cs = 1;
wim	32:59c4b8f648d4	2219
wim	30:033048611c01	2220	// Setup the spi for 9 bit data, low steady state clock,
wim	30:033048611c01	2221	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	32:59c4b8f648d4	2222	// _spi->format(9,0);
wim	32:59c4b8f648d4	2223	_spi->format(9,3);
wim	30:033048611c01	2224	_spi->frequency(1000000);
wim	30:033048611c01	2225
wim	30:033048611c01	2226	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	30:033048611c01	2227	if (bl != NC) {
wim	30:033048611c01	2228	_bl = new DigitalOut(bl); //Construct new pin
wim	30:033048611c01	2229	_bl->write(0); //Deactivate
wim	30:033048611c01	2230	}
wim	30:033048611c01	2231	else {
wim	30:033048611c01	2232	// No Hardware Backlight pin
wim	30:033048611c01	2233	_bl = NULL; //Construct dummy pin
wim	30:033048611c01	2234	}
wim	30:033048611c01	2235
wim	30:033048611c01	2236	//Sanity check
wim	30:033048611c01	2237	if (_ctrl & LCD_C_SPI3_9) {
wim	30:033048611c01	2238	_init();
wim	30:033048611c01	2239	}
wim	30:033048611c01	2240	else {
wim	30:033048611c01	2241	error("Error: LCD Controller type does not support native SPI3 9 bits interface\n\r");
wim	30:033048611c01	2242	}
wim	30:033048611c01	2243	}
wim	30:033048611c01	2244
wim	30:033048611c01	2245	TextLCD_SPI_N_3_9::~TextLCD_SPI_N_3_9() {
wim	30:033048611c01	2246	if (_bl != NULL) {delete _bl;} // BL pin
wim	30:033048611c01	2247	}
wim	30:033048611c01	2248
wim	30:033048611c01	2249	// Not used in this mode
wim	30:033048611c01	2250	void TextLCD_SPI_N_3_9::_setEnable(bool value) {
wim	30:033048611c01	2251	}
wim	30:033048611c01	2252
wim	30:033048611c01	2253	// Set RS pin
wim	30:033048611c01	2254	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	30:033048611c01	2255	void TextLCD_SPI_N_3_9::_setRS(bool value) {
wim	30:033048611c01	2256	// The controlbits define the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	2257	// b8 b7...........b0
wim	30:033048611c01	2258	// RS command or data
wim	30:033048611c01	2259	//
wim	30:033048611c01	2260	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	2261	//
wim	30:033048611c01	2262
wim	30:033048611c01	2263	if (value) {
wim	30:033048611c01	2264	_controlbyte = 0x01; // Next byte is data
wim	30:033048611c01	2265	}
wim	30:033048611c01	2266	else {
wim	30:033048611c01	2267	_controlbyte = 0x00; // Next byte is command
wim	30:033048611c01	2268	}
wim	30:033048611c01	2269
wim	30:033048611c01	2270	}
wim	30:033048611c01	2271
wim	30:033048611c01	2272	// Set BL pin
wim	30:033048611c01	2273	void TextLCD_SPI_N_3_9::_setBL(bool value) {
wim	30:033048611c01	2274	if (_bl) {
wim	30:033048611c01	2275	_bl->write(value);
wim	30:033048611c01	2276	}
wim	30:033048611c01	2277	}
wim	30:033048611c01	2278
wim	30:033048611c01	2279	// Not used in this mode
wim	30:033048611c01	2280	void TextLCD_SPI_N_3_9::_setData(int value) {
wim	30:033048611c01	2281	}
wim	30:033048611c01	2282
wim	30:033048611c01	2283	// Write a byte using SPI3 9 bits mode
wim	30:033048611c01	2284	void TextLCD_SPI_N_3_9::_writeByte(int value) {
wim	30:033048611c01	2285	_cs = 0;
wim	30:033048611c01	2286	wait_us(1);
wim	30:033048611c01	2287	_spi->write( (_controlbyte << 8) \| (value & 0xFF));
wim	30:033048611c01	2288	wait_us(1);
wim	30:033048611c01	2289	_cs = 1;
wim	30:033048611c01	2290	}
wim	30:033048611c01	2291
wim	30:033048611c01	2292	//------- End TextLCD_SPI_N_3_9 -----------
wim	30:033048611c01	2293	#endif
wim	21:9eb628d9e164	2294
wim	21:9eb628d9e164	2295
wim	32:59c4b8f648d4	2296	#if(1)
wim	30:033048611c01	2297	//------- Start TextLCD_SPI_N_3_10 --------
wim	30:033048611c01	2298
wim	30:033048611c01	2299	/** Create a TextLCD interface using a controller with a native SPI3 10 bits interface
wim	30:033048611c01	2300	*
wim	30:033048611c01	2301	* @param spi SPI Bus
wim	30:033048611c01	2302	* @param cs chip select pin (active low)
wim	30:033048611c01	2303	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	30:033048611c01	2304	* @param bl Backlight control line (optional, default = NC)
wim	30:033048611c01	2305	* @param ctrl LCD controller (default = AIP31068)
wim	30:033048611c01	2306	*/
wim	30:033048611c01	2307	TextLCD_SPI_N_3_10::TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	30:033048611c01	2308	TextLCD_Base(type, ctrl),
wim	30:033048611c01	2309	_spi(spi),
wim	30:033048611c01	2310	_cs(cs) {
wim	30:033048611c01	2311
wim	32:59c4b8f648d4	2312	// Init CS
wim	32:59c4b8f648d4	2313	_cs = 1;
wim	32:59c4b8f648d4	2314
wim	30:033048611c01	2315	// Setup the spi for 10 bit data, low steady state clock,
wim	30:033048611c01	2316	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	30:033048611c01	2317	_spi->format(10,0);
wim	30:033048611c01	2318	_spi->frequency(1000000);
wim	30:033048611c01	2319
wim	30:033048611c01	2320	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	30:033048611c01	2321	if (bl != NC) {
wim	30:033048611c01	2322	_bl = new DigitalOut(bl); //Construct new pin
wim	30:033048611c01	2323	_bl->write(0); //Deactivate
wim	30:033048611c01	2324	}
wim	30:033048611c01	2325	else {
wim	30:033048611c01	2326	// No Hardware Backlight pin
wim	30:033048611c01	2327	_bl = NULL; //Construct dummy pin
wim	30:033048611c01	2328	}
wim	30:033048611c01	2329
wim	30:033048611c01	2330	//Sanity check
wim	30:033048611c01	2331	if (_ctrl & LCD_C_SPI3_10) {
wim	30:033048611c01	2332	_init();
wim	30:033048611c01	2333	}
wim	30:033048611c01	2334	else {
wim	30:033048611c01	2335	error("Error: LCD Controller type does not support native SPI3 10 bits interface\n\r");
wim	30:033048611c01	2336	}
wim	30:033048611c01	2337	}
wim	30:033048611c01	2338
wim	30:033048611c01	2339	TextLCD_SPI_N_3_10::~TextLCD_SPI_N_3_10() {
wim	30:033048611c01	2340	if (_bl != NULL) {delete _bl;} // BL pin
wim	30:033048611c01	2341	}
wim	30:033048611c01	2342
wim	30:033048611c01	2343	// Not used in this mode
wim	30:033048611c01	2344	void TextLCD_SPI_N_3_10::_setEnable(bool value) {
wim	30:033048611c01	2345	}
wim	30:033048611c01	2346
wim	30:033048611c01	2347	// Set RS pin
wim	30:033048611c01	2348	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	30:033048611c01	2349	void TextLCD_SPI_N_3_10::_setRS(bool value) {
wim	30:033048611c01	2350	// The controlbits define the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	2351	// b9 b8 b7...........b0
wim	30:033048611c01	2352	// RS RW command or data
wim	30:033048611c01	2353	//
wim	30:033048611c01	2354	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	2355	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	30:033048611c01	2356	//
wim	30:033048611c01	2357
wim	30:033048611c01	2358	if (value) {
wim	30:033048611c01	2359	_controlbyte = 0x02; // Next byte is data
wim	30:033048611c01	2360	}
wim	30:033048611c01	2361	else {
wim	30:033048611c01	2362	_controlbyte = 0x00; // Next byte is command
wim	30:033048611c01	2363	}
wim	30:033048611c01	2364
wim	30:033048611c01	2365	}
wim	30:033048611c01	2366
wim	30:033048611c01	2367	// Set BL pin
wim	30:033048611c01	2368	void TextLCD_SPI_N_3_10::_setBL(bool value) {
wim	30:033048611c01	2369	if (_bl) {
wim	30:033048611c01	2370	_bl->write(value);
wim	30:033048611c01	2371	}
wim	30:033048611c01	2372	}
wim	30:033048611c01	2373
wim	30:033048611c01	2374	// Not used in this mode
wim	30:033048611c01	2375	void TextLCD_SPI_N_3_10::_setData(int value) {
wim	30:033048611c01	2376	}
wim	30:033048611c01	2377
wim	30:033048611c01	2378	// Write a byte using SPI3 10 bits mode
wim	30:033048611c01	2379	void TextLCD_SPI_N_3_10::_writeByte(int value) {
wim	30:033048611c01	2380	_cs = 0;
wim	30:033048611c01	2381	wait_us(1);
wim	30:033048611c01	2382	_spi->write( (_controlbyte << 8) \| (value & 0xFF));
wim	30:033048611c01	2383	wait_us(1);
wim	30:033048611c01	2384	_cs = 1;
wim	30:033048611c01	2385	}
wim	30:033048611c01	2386
wim	30:033048611c01	2387	//------- End TextLCD_SPI_N_3_10 ----------
wim	32:59c4b8f648d4	2388	#endif
wim	32:59c4b8f648d4	2389
wim	32:59c4b8f648d4	2390	#if(0)
wim	32:59c4b8f648d4	2391	//Code to be checked out on logic analyser. Not yet tested on hardware..
wim	32:59c4b8f648d4	2392
wim	32:59c4b8f648d4	2393	//------- Start TextLCD_SPI_N_3_16 --------
wim	32:59c4b8f648d4	2394
wim	32:59c4b8f648d4	2395	/** Create a TextLCD interface using a controller with a native SPI3 16 bits interface
wim	32:59c4b8f648d4	2396	*
wim	32:59c4b8f648d4	2397	* @param spi SPI Bus
wim	32:59c4b8f648d4	2398	* @param cs chip select pin (active low)
wim	32:59c4b8f648d4	2399	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	32:59c4b8f648d4	2400	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	2401	* @param ctrl LCD controller (default = PT6314)
wim	32:59c4b8f648d4	2402	*/
wim	32:59c4b8f648d4	2403	TextLCD_SPI_N_3_16::TextLCD_SPI_N_3_16(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	32:59c4b8f648d4	2404	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	2405	_spi(spi),
wim	32:59c4b8f648d4	2406	_cs(cs) {
wim	32:59c4b8f648d4	2407
wim	32:59c4b8f648d4	2408	// Init CS
wim	32:59c4b8f648d4	2409	_cs = 1;
wim	32:59c4b8f648d4	2410
wim	32:59c4b8f648d4	2411	// Setup the spi for 8 bit data, low steady state clock,
wim	32:59c4b8f648d4	2412	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	32:59c4b8f648d4	2413	_spi->format(8,0);
wim	32:59c4b8f648d4	2414	_spi->frequency(1000000);
wim	32:59c4b8f648d4	2415
wim	32:59c4b8f648d4	2416	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	32:59c4b8f648d4	2417	if (bl != NC) {
wim	32:59c4b8f648d4	2418	_bl = new DigitalOut(bl); //Construct new pin
wim	32:59c4b8f648d4	2419	_bl->write(0); //Deactivate
wim	32:59c4b8f648d4	2420	}
wim	32:59c4b8f648d4	2421	else {
wim	32:59c4b8f648d4	2422	// No Hardware Backlight pin
wim	32:59c4b8f648d4	2423	_bl = NULL; //Construct dummy pin
wim	32:59c4b8f648d4	2424	}
wim	32:59c4b8f648d4	2425
wim	32:59c4b8f648d4	2426	//Sanity check
wim	32:59c4b8f648d4	2427	if (_ctrl & LCD_C_SPI3_16) {
wim	32:59c4b8f648d4	2428	_init();
wim	32:59c4b8f648d4	2429	}
wim	32:59c4b8f648d4	2430	else {
wim	32:59c4b8f648d4	2431	error("Error: LCD Controller type does not support native SPI3 16 bits interface\n\r");
wim	32:59c4b8f648d4	2432	}
wim	32:59c4b8f648d4	2433	}
wim	32:59c4b8f648d4	2434
wim	32:59c4b8f648d4	2435	TextLCD_SPI_N_3_16::~TextLCD_SPI_N_3_16() {
wim	32:59c4b8f648d4	2436	if (_bl != NULL) {delete _bl;} // BL pin
wim	32:59c4b8f648d4	2437	}
wim	32:59c4b8f648d4	2438
wim	32:59c4b8f648d4	2439	// Not used in this mode
wim	32:59c4b8f648d4	2440	void TextLCD_SPI_N_3_16::_setEnable(bool value) {
wim	32:59c4b8f648d4	2441	}
wim	32:59c4b8f648d4	2442
wim	32:59c4b8f648d4	2443	// Set RS pin
wim	32:59c4b8f648d4	2444	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	32:59c4b8f648d4	2445	void TextLCD_SPI_N_3_16::_setRS(bool value) {
wim	32:59c4b8f648d4	2446	// The 16bit mode is split in 2 bytes. The first byte is for synchronisation and controlbits. The controlbits define the meaning of the next byte.
wim	32:59c4b8f648d4	2447	// The 8 actual bits represent either a data or a command byte.
wim	32:59c4b8f648d4	2448	// b15 b14 b13 b12 b11 b10 b9 b8 - b7 b6 b5 b4 b3 b2 b1 b0
wim	32:59c4b8f648d4	2449	// 1 1 1 1 1 RW RS 0 d7 d6 d5 d4 d3 d2 d1 d0
wim	32:59c4b8f648d4	2450	//
wim	32:59c4b8f648d4	2451	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	32:59c4b8f648d4	2452	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	32:59c4b8f648d4	2453	//
wim	32:59c4b8f648d4	2454
wim	32:59c4b8f648d4	2455	if (value) {
wim	32:59c4b8f648d4	2456	_controlbyte = 0xFA; // Next byte is data
wim	32:59c4b8f648d4	2457	}
wim	32:59c4b8f648d4	2458	else {
wim	32:59c4b8f648d4	2459	_controlbyte = 0xF8; // Next byte is command
wim	32:59c4b8f648d4	2460	}
wim	32:59c4b8f648d4	2461	}
wim	32:59c4b8f648d4	2462
wim	32:59c4b8f648d4	2463	// Set BL pin
wim	32:59c4b8f648d4	2464	void TextLCD_SPI_N_3_16::_setBL(bool value) {
wim	32:59c4b8f648d4	2465	if (_bl) {
wim	32:59c4b8f648d4	2466	_bl->write(value);
wim	32:59c4b8f648d4	2467	}
wim	32:59c4b8f648d4	2468	}
wim	32:59c4b8f648d4	2469
wim	32:59c4b8f648d4	2470	// Not used in this mode
wim	32:59c4b8f648d4	2471	void TextLCD_SPI_N_3_16::_setData(int value) {
wim	32:59c4b8f648d4	2472	}
wim	32:59c4b8f648d4	2473
wim	32:59c4b8f648d4	2474
wim	32:59c4b8f648d4	2475	// Write a byte using SPI3 16 bits mode
wim	32:59c4b8f648d4	2476	void TextLCD_SPI_N_3_16::_writeByte(int value) {
wim	32:59c4b8f648d4	2477	_cs = 0;
wim	32:59c4b8f648d4	2478	wait_us(1);
wim	32:59c4b8f648d4	2479
wim	32:59c4b8f648d4	2480	_spi->write(_controlbyte);
wim	32:59c4b8f648d4	2481
wim	32:59c4b8f648d4	2482	_spi->write(value);
wim	32:59c4b8f648d4	2483
wim	32:59c4b8f648d4	2484	wait_us(1);
wim	32:59c4b8f648d4	2485	_cs = 1;
wim	32:59c4b8f648d4	2486	}
wim	32:59c4b8f648d4	2487
wim	32:59c4b8f648d4	2488	//------- End TextLCD_SPI_N_3_16 ----------
wim	32:59c4b8f648d4	2489	#endif
wim	32:59c4b8f648d4	2490
wim	32:59c4b8f648d4	2491	#if(1)
wim	32:59c4b8f648d4	2492	//Code to be checked out on logic analyser. Not yet tested on hardware..
wim	32:59c4b8f648d4	2493
wim	32:59c4b8f648d4	2494	//------- Start TextLCD_SPI_N_3_24 --------
wim	32:59c4b8f648d4	2495
wim	32:59c4b8f648d4	2496	/** Create a TextLCD interface using a controller with a native SPI3 24 bits interface
wim	32:59c4b8f648d4	2497	*
wim	32:59c4b8f648d4	2498	* @param spi SPI Bus
wim	32:59c4b8f648d4	2499	* @param cs chip select pin (active low)
wim	32:59c4b8f648d4	2500	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	32:59c4b8f648d4	2501	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	2502	* @param ctrl LCD controller (default = SSD1803)
wim	32:59c4b8f648d4	2503	*/
wim	32:59c4b8f648d4	2504	TextLCD_SPI_N_3_24::TextLCD_SPI_N_3_24(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	32:59c4b8f648d4	2505	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	2506	_spi(spi),
wim	32:59c4b8f648d4	2507	_cs(cs) {
wim	32:59c4b8f648d4	2508
wim	32:59c4b8f648d4	2509	// Init CS
wim	32:59c4b8f648d4	2510	_cs = 1;
wim	32:59c4b8f648d4	2511
wim	32:59c4b8f648d4	2512	// Setup the spi for 8 bit data, low steady state clock,
wim	32:59c4b8f648d4	2513	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	32:59c4b8f648d4	2514	_spi->format(8,0);
wim	32:59c4b8f648d4	2515	_spi->frequency(1000000);
wim	32:59c4b8f648d4	2516
wim	32:59c4b8f648d4	2517	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	32:59c4b8f648d4	2518	if (bl != NC) {
wim	32:59c4b8f648d4	2519	_bl = new DigitalOut(bl); //Construct new pin
wim	32:59c4b8f648d4	2520	_bl->write(0); //Deactivate
wim	32:59c4b8f648d4	2521	}
wim	32:59c4b8f648d4	2522	else {
wim	32:59c4b8f648d4	2523	// No Hardware Backlight pin
wim	32:59c4b8f648d4	2524	_bl = NULL; //Construct dummy pin
wim	32:59c4b8f648d4	2525	}
wim	32:59c4b8f648d4	2526
wim	32:59c4b8f648d4	2527	//Sanity check
wim	32:59c4b8f648d4	2528	if (_ctrl & LCD_C_SPI3_24) {
wim	32:59c4b8f648d4	2529	_init();
wim	32:59c4b8f648d4	2530	}
wim	32:59c4b8f648d4	2531	else {
wim	32:59c4b8f648d4	2532	error("Error: LCD Controller type does not support native SPI3 24 bits interface\n\r");
wim	32:59c4b8f648d4	2533	}
wim	32:59c4b8f648d4	2534	}
wim	32:59c4b8f648d4	2535
wim	32:59c4b8f648d4	2536	TextLCD_SPI_N_3_24::~TextLCD_SPI_N_3_24() {
wim	32:59c4b8f648d4	2537	if (_bl != NULL) {delete _bl;} // BL pin
wim	32:59c4b8f648d4	2538	}
wim	32:59c4b8f648d4	2539
wim	32:59c4b8f648d4	2540	// Not used in this mode
wim	32:59c4b8f648d4	2541	void TextLCD_SPI_N_3_24::_setEnable(bool value) {
wim	32:59c4b8f648d4	2542	}
wim	32:59c4b8f648d4	2543
wim	32:59c4b8f648d4	2544	// Set RS pin
wim	32:59c4b8f648d4	2545	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	32:59c4b8f648d4	2546	void TextLCD_SPI_N_3_24::_setRS(bool value) {
wim	32:59c4b8f648d4	2547	// The 24bit mode is split in 3 bytes. The first byte is for synchronisation and controlbits. The controlbits define the meaning of the next two bytes.
wim	32:59c4b8f648d4	2548	// Each byte encodes 4 actual bits. The 8 actual bits represent either a data or a command byte.
wim	32:59c4b8f648d4	2549	// b23 b22 b21 b20 b19 b18 b17 b16 - b15 b14 b13 b12 b11 b10 b9 b8 - b7 b6 b5 b4 b3 b2 b1 b0
wim	32:59c4b8f648d4	2550	// 1 1 1 1 1 RW RS 0 d0 d1 d2 d3 0 0 0 0 d4 d5 d6 d7 0 0 0 0
wim	32:59c4b8f648d4	2551	//
wim	32:59c4b8f648d4	2552	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	32:59c4b8f648d4	2553	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	32:59c4b8f648d4	2554	//
wim	32:59c4b8f648d4	2555	// Note: SPI3_24 expects LSB first. This is inconsistent with regular SPI convention (and hardware) that sends MSB first.
wim	32:59c4b8f648d4	2556
wim	32:59c4b8f648d4	2557	if (value) {
wim	32:59c4b8f648d4	2558	_controlbyte = 0xFA; // Next byte is data
wim	32:59c4b8f648d4	2559	}
wim	32:59c4b8f648d4	2560	else {
wim	32:59c4b8f648d4	2561	_controlbyte = 0xF8; // Next byte is command
wim	32:59c4b8f648d4	2562	}
wim	32:59c4b8f648d4	2563
wim	32:59c4b8f648d4	2564	}
wim	32:59c4b8f648d4	2565
wim	32:59c4b8f648d4	2566	// Set BL pin
wim	32:59c4b8f648d4	2567	void TextLCD_SPI_N_3_24::_setBL(bool value) {
wim	32:59c4b8f648d4	2568	if (_bl) {
wim	32:59c4b8f648d4	2569	_bl->write(value);
wim	32:59c4b8f648d4	2570	}
wim	32:59c4b8f648d4	2571	}
wim	32:59c4b8f648d4	2572
wim	32:59c4b8f648d4	2573	// Not used in this mode
wim	32:59c4b8f648d4	2574	void TextLCD_SPI_N_3_24::_setData(int value) {
wim	32:59c4b8f648d4	2575	}
wim	32:59c4b8f648d4	2576
wim	32:59c4b8f648d4	2577	//Mapping table to flip the bits around cause SPI3_24 expects LSB first.
wim	32:59c4b8f648d4	2578	const uint8_t map3_24[16] = {0x00, 0x80, 0x40, 0xC0, 0x20, 0xA0, 0x60, 0xE0, 0x10, 0x90, 0x50, 0xD0, 0x30, 0xB0, 0x70, 0xF0};
wim	32:59c4b8f648d4	2579
wim	32:59c4b8f648d4	2580	// Write a byte using SPI3 24 bits mode
wim	32:59c4b8f648d4	2581	void TextLCD_SPI_N_3_24::_writeByte(int value) {
wim	32:59c4b8f648d4	2582	_cs = 0;
wim	32:59c4b8f648d4	2583	wait_us(1);
wim	32:59c4b8f648d4	2584	_spi->write(_controlbyte);
wim	32:59c4b8f648d4	2585
wim	32:59c4b8f648d4	2586	//Map and send the LSB nibble
wim	32:59c4b8f648d4	2587	_spi->write( map3_24[value & 0x0F]);
wim	32:59c4b8f648d4	2588
wim	32:59c4b8f648d4	2589	//Map and send the MSB nibble
wim	32:59c4b8f648d4	2590	_spi->write( map3_24[(value >> 4) & 0x0F]);
wim	32:59c4b8f648d4	2591
wim	32:59c4b8f648d4	2592	wait_us(1);
wim	32:59c4b8f648d4	2593	_cs = 1;
wim	32:59c4b8f648d4	2594	}
wim	32:59c4b8f648d4	2595
wim	32:59c4b8f648d4	2596	//------- End TextLCD_SPI_N_3_24 ----------
wim	30:033048611c01	2597	#endif

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	11 Oct 2015
Imports:	1
Forks:	0
Commits:	46
Dependents:	2
Dependencies:	0
Followers:	1

TextLCD.cpp@32:59c4b8f648d4, 2014-08-22 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning