Andrew Klimenyuk / Mbed 2 deprecated STM32F103C8T6_DS1820

STM32F103C8T6_DS1820

Dependencies:   DS1820 mbed-STM32F103C8T6 mbed

Fork of STM32F103C8T6_DS1820 by Zoltan Hudak

main.cpp@1:93ec3038c226, 2017-01-06 (annotated)

Committer:
hudakz
Date:
Fri Jan 06 19:27:54 2017 +0000
Revision:
1:93ec3038c226
Parent:
0:ce867244a530 
Updated.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
hudakz 0:ce867244a530 1 /*
hudakz 0:ce867244a530 2 * DS1820 sensor demo
hudakz 0:ce867244a530 3 *
hudakz 0:ce867244a530 4 * Note: Don't forget to connect a 4.7k Ohm resistor
hudakz 0:ce867244a530 5 * between the DS1820's data pin and the +3.3V pin
hudakz 0:ce867244a530 6 *
hudakz 0:ce867244a530 7 */
hudakz 0:ce867244a530 8 #include "stm32f103c8t6.h"
hudakz 0:ce867244a530 9 #include "mbed.h"
hudakz 0:ce867244a530 10 #include "DS1820.h"
hudakz 0:ce867244a530 11
hudakz 0:ce867244a530 12 int main() {
hudakz 0:ce867244a530 13 confSysClock(); //Configure system clock (72MHz HSE clock, 48MHz USB clock)
hudakz 0:ce867244a530 14
hudakz 0:ce867244a530 15 Serial pc(PA_2, PA_3);
hudakz 1:93ec3038c226 16 DigitalOut led(LED1);
hudakz 0:ce867244a530 17 DS1820 ds1820(PA_9); // substitute PA_9 with actual mbed pin name connected to the DS1820 data pin
hudakz 0:ce867244a530 18 float temp = 0;
hudakz 0:ce867244a530 19 int error = 0;
hudakz 0:ce867244a530 20
hudakz 0:ce867244a530 21 if(ds1820.begin()) {
hudakz 0:ce867244a530 22 while(1) {
hudakz 1:93ec3038c226 23 ds1820.startConversion(); // start temperature conversion from analog to digital
hudakz 1:93ec3038c226 24 wait(1.0); // let DS1820 complete the temperature conversion
hudakz 0:ce867244a530 25 error = ds1820.read(temp); // read temperature from DS1820 and perform cyclic redundancy check (CRC)
hudakz 0:ce867244a530 26 switch(error) {
hudakz 0:ce867244a530 27 case 0: // no errors -> 'temp' contains the value of measured temperature
hudakz 0:ce867244a530 28 pc.printf("temp = %3.1f%cC\r\n", temp, 176);
hudakz 0:ce867244a530 29 break;
hudakz 0:ce867244a530 30 case 1: // no sensor present -> 'temp' is not updated
hudakz 0:ce867244a530 31 pc.printf("no sensor present\n\r");
hudakz 0:ce867244a530 32 break;
hudakz 0:ce867244a530 33 case 2: // CRC error -> 'temp' is not updated
hudakz 0:ce867244a530 34 pc.printf("CRC error\r\n");
hudakz 0:ce867244a530 35 }
hudakz 1:93ec3038c226 36 led = !led;
hudakz 0:ce867244a530 37 }
hudakz 0:ce867244a530 38 } else
hudakz 0:ce867244a530 39 pc.printf("No DS1820 sensor found!\r\n");
hudakz 0:ce867244a530 40 }
hudakz 0:ce867244a530 41