t
Fork of mbed-dev by
Diff: targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 23:ee8ca7052b3c
- Child:
- 147:30b64687e01f
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h --- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,231 +1,236 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_PINNAMES_H -#define MBED_PINNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM -#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\ - ((PUPD & 0x07) << 4) |\ - ((AFNUM & 0x0F) << 7))) - -#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\ - ((PUPD & 0x07) << 4) |\ - ((AFNUM & 0x0F) << 7) |\ - ((CHANNEL & 0x0F) << 11) |\ - ((INVERTED & 0x01) << 15))) - -#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) -#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) -#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) -#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F) -#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01) -#define STM_MODE_INPUT (0) -#define STM_MODE_OUTPUT_PP (1) -#define STM_MODE_OUTPUT_OD (2) -#define STM_MODE_AF_PP (3) -#define STM_MODE_AF_OD (4) -#define STM_MODE_ANALOG (5) -#define STM_MODE_IT_RISING (6) -#define STM_MODE_IT_FALLING (7) -#define STM_MODE_IT_RISING_FALLING (8) -#define STM_MODE_EVT_RISING (9) -#define STM_MODE_EVT_FALLING (10) -#define STM_MODE_EVT_RISING_FALLING (11) -#define STM_MODE_IT_EVT_RESET (12) - -// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) -// Low nibble = pin number -#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) -#define STM_PIN(X) ((uint32_t)(X) & 0xF) - -typedef enum { - PIN_INPUT, - PIN_OUTPUT -} PinDirection; - -typedef enum { - PA_0 = 0x00, - PA_1 = 0x01, - PA_2 = 0x02, - PA_3 = 0x03, - PA_4 = 0x04, - PA_5 = 0x05, - PA_6 = 0x06, - PA_7 = 0x07, - PA_8 = 0x08, - PA_9 = 0x09, - PA_10 = 0x0A, - PA_11 = 0x0B, - PA_12 = 0x0C, - PA_13 = 0x0D, - PA_14 = 0x0E, - PA_15 = 0x0F, - - PB_0 = 0x10, - PB_1 = 0x11, - PB_2 = 0x12, - PB_3 = 0x13, - PB_4 = 0x14, - PB_5 = 0x15, - PB_6 = 0x16, - PB_7 = 0x17, - PB_8 = 0x18, - PB_9 = 0x19, - PB_10 = 0x1A, - PB_11 = 0x1B, - PB_12 = 0x1C, - PB_13 = 0x1D, - PB_14 = 0x1E, - PB_15 = 0x1F, - - PC_0 = 0x20, - PC_1 = 0x21, - PC_2 = 0x22, - PC_3 = 0x23, - PC_4 = 0x24, - PC_5 = 0x25, - PC_6 = 0x26, - PC_7 = 0x27, - PC_8 = 0x28, - PC_9 = 0x29, - PC_10 = 0x2A, - PC_11 = 0x2B, - PC_12 = 0x2C, - PC_13 = 0x2D, - PC_14 = 0x2E, - PC_15 = 0x2F, - - PD_0 = 0x30, - PD_1 = 0x31, - PD_2 = 0x32, - PD_3 = 0x33, - PD_4 = 0x34, - PD_5 = 0x35, - PD_6 = 0x36, - PD_7 = 0x37, - PD_8 = 0x38, - PD_9 = 0x39, - PD_10 = 0x3A, - PD_11 = 0x3B, - PD_12 = 0x3C, - PD_13 = 0x3D, - PD_14 = 0x3E, - PD_15 = 0x3F, - - PE_0 = 0x40, - PE_1 = 0x41, - PE_2 = 0x42, - PE_3 = 0x43, - PE_4 = 0x44, - PE_5 = 0x45, - PE_6 = 0x46, - PE_7 = 0x47, - PE_8 = 0x48, - PE_9 = 0x49, - PE_10 = 0x4A, - PE_11 = 0x4B, - PE_12 = 0x4C, - PE_13 = 0x4D, - PE_14 = 0x4E, - PE_15 = 0x4F, - - - PF_0 = 0x50, - PF_1 = 0x51, - PF_2 = 0x52, - PF_3 = 0x53, - PF_4 = 0x54, - PF_5 = 0x55, - PF_6 = 0x56, - PF_7 = 0x57, - PF_8 = 0x58, - PF_9 = 0x59, - PF_10 = 0x5A, - PF_11 = 0x5B, - PF_12 = 0x5C, - PF_13 = 0x5D, - PF_14 = 0x5E, - PF_15 = 0x5F, - - - PG_0 = 0x60, - PG_1 = 0x61, - PG_2 = 0x62, - PG_3 = 0x63, - PG_4 = 0x64, - PG_5 = 0x65, - PG_6 = 0x66, - PG_7 = 0x67, - PG_8 = 0x68, - PG_9 = 0x69, - PG_10 = 0x6A, - PG_11 = 0x6B, - PG_12 = 0x6C, - PG_13 = 0x6D, - PG_14 = 0x6E, - PG_15 = 0x6F, - - - PH_0 = 0x70, - PH_1 = 0x71, - - // Generic signals namings - LED1 = PG_13, // Corresponds to LD3 on MB1075B - LED2 = PG_14, // Corresponds to LD4 on MB1075B - LED3 = PG_13, - LED4 = PG_14, - USER_BUTTON = PA_0, - SERIAL_TX = PA_9, - SERIAL_RX = PA_10, - USBTX = PA_9, - USBRX = PA_10, - // Not connected - NC = (int)0xFFFFFFFF -} PinName; - -typedef enum { - PullNone = 0, - PullUp = 1, - PullDown = 2, - OpenDrain = 3, - PullDefault = PullNone -} PinMode; - -#ifdef __cplusplus -} -#endif - -#endif +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM +#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7))) + +#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\ + ((PUPD & 0x07) << 4) |\ + ((AFNUM & 0x0F) << 7) |\ + ((CHANNEL & 0x0F) << 11) |\ + ((INVERTED & 0x01) << 15))) + +#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) +#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) +#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) +#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F) +#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01) +#define STM_MODE_INPUT (0) +#define STM_MODE_OUTPUT_PP (1) +#define STM_MODE_OUTPUT_OD (2) +#define STM_MODE_AF_PP (3) +#define STM_MODE_AF_OD (4) +#define STM_MODE_ANALOG (5) +#define STM_MODE_IT_RISING (6) +#define STM_MODE_IT_FALLING (7) +#define STM_MODE_IT_RISING_FALLING (8) +#define STM_MODE_EVT_RISING (9) +#define STM_MODE_EVT_FALLING (10) +#define STM_MODE_EVT_RISING_FALLING (11) +#define STM_MODE_IT_EVT_RESET (12) + +// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) +// Low nibble = pin number +#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) +#define STM_PIN(X) ((uint32_t)(X) & 0xF) + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_11 = 0x1B, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_0 = 0x30, + PD_1 = 0x31, + PD_2 = 0x32, + PD_3 = 0x33, + PD_4 = 0x34, + PD_5 = 0x35, + PD_6 = 0x36, + PD_7 = 0x37, + PD_8 = 0x38, + PD_9 = 0x39, + PD_10 = 0x3A, + PD_11 = 0x3B, + PD_12 = 0x3C, + PD_13 = 0x3D, + PD_14 = 0x3E, + PD_15 = 0x3F, + + PE_0 = 0x40, + PE_1 = 0x41, + PE_2 = 0x42, + PE_3 = 0x43, + PE_4 = 0x44, + PE_5 = 0x45, + PE_6 = 0x46, + PE_7 = 0x47, + PE_8 = 0x48, + PE_9 = 0x49, + PE_10 = 0x4A, + PE_11 = 0x4B, + PE_12 = 0x4C, + PE_13 = 0x4D, + PE_14 = 0x4E, + PE_15 = 0x4F, + + + PF_0 = 0x50, + PF_1 = 0x51, + PF_2 = 0x52, + PF_3 = 0x53, + PF_4 = 0x54, + PF_5 = 0x55, + PF_6 = 0x56, + PF_7 = 0x57, + PF_8 = 0x58, + PF_9 = 0x59, + PF_10 = 0x5A, + PF_11 = 0x5B, + PF_12 = 0x5C, + PF_13 = 0x5D, + PF_14 = 0x5E, + PF_15 = 0x5F, + + + PG_0 = 0x60, + PG_1 = 0x61, + PG_2 = 0x62, + PG_3 = 0x63, + PG_4 = 0x64, + PG_5 = 0x65, + PG_6 = 0x66, + PG_7 = 0x67, + PG_8 = 0x68, + PG_9 = 0x69, + PG_10 = 0x6A, + PG_11 = 0x6B, + PG_12 = 0x6C, + PG_13 = 0x6D, + PG_14 = 0x6E, + PG_15 = 0x6F, + + + PH_0 = 0x70, + PH_1 = 0x71, + + // Generic signals namings + LED1 = PG_13, // Corresponds to LD3 on MB1075B + LED2 = PG_14, // Corresponds to LD4 on MB1075B + LED3 = PG_13, + LED4 = PG_14, + USER_BUTTON = PA_0, + SERIAL_TX = PA_9, + SERIAL_RX = PA_10, + USBTX = PA_9, + USBRX = PA_10, + SPI_MOSI = PA_7, + SPI_MISO = PA_6, + SPI_SCK = PA_5, + SPI_CS = PB_6, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullUp = 1, + PullDown = 2, + OpenDrain = 3, + PullDefault = PullNone +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif