Amit Gandhi
t
Fork of
mbed-dev
by 
mbed official
Diff: targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51_DK/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51_DK/PinNames.h
--- a/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51_DK/PinNames.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51_DK/PinNames.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,178 +1,178 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2013 Nordic Semiconductor
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 3
-
-typedef enum {
- p0 = 0,
- p1 = 1,
- p2 = 2,
- p3 = 3,
- p4 = 4,
- p5 = 5,
- p6 = 6,
- p7 = 7,
- p8 = 8,
- p9 = 9,
- p10 = 10,
- p11 = 11,
- p12 = 12,
- p13 = 13,
- p14 = 14,
- p15 = 15,
- p16 = 16,
- p17 = 17,
- p18 = 18,
- p19 = 19,
- p20 = 20,
- p21 = 21,
- p22 = 22,
- p23 = 23,
- p24 = 24,
- p25 = 25,
- p26 = 26,
- p27 = 27,
- p28 = 28,
- p29 = 29,
- p30 = 30,
-
- P0_0 = p0,
- P0_1 = p1,
- P0_2 = p2,
- P0_3 = p3,
- P0_4 = p4,
- P0_5 = p5,
- P0_6 = p6,
- P0_7 = p7,
-
- P0_8 = p8,
- P0_9 = p9,
- P0_10 = p10,
- P0_11 = p11,
- P0_12 = p12,
- P0_13 = p13,
- P0_14 = p14,
- P0_15 = p15,
-
- P0_16 = p16,
- P0_17 = p17,
- P0_18 = p18,
- P0_19 = p19,
- P0_20 = p20,
- P0_21 = p21,
- P0_22 = p22,
- P0_23 = p23,
-
- P0_24 = p24,
- P0_25 = p25,
- P0_26 = p26,
- P0_27 = p27,
- P0_28 = p28,
- P0_29 = p29,
- P0_30 = p30,
-
- LED1 = p21,
- LED2 = p22,
- LED3 = p23,
- LED4 = p24,
-
- BUTTON1 = p17,
- BUTTON2 = p18,
- BUTTON3 = p19,
- BUTTON4 = p20,
-
- RX_PIN_NUMBER = p11,
- TX_PIN_NUMBER = p9,
- CTS_PIN_NUMBER = p10,
- RTS_PIN_NUMBER = p8,
-
- // mBed interface Pins
- USBTX = TX_PIN_NUMBER,
- USBRX = RX_PIN_NUMBER,
-
- SPI_PSELMOSI0 = p25,
- SPI_PSELMISO0 = p28,
- SPI_PSELSS0 = p24,
- SPI_PSELSCK0 = p29,
-
- SPI_PSELMOSI1 = p13,
- SPI_PSELMISO1 = p14,
- SPI_PSELSS1 = p12,
- SPI_PSELSCK1 = p15,
-
- SPIS_PSELMOSI = p13,
- SPIS_PSELMISO = p14,
- SPIS_PSELSS = p12,
- SPIS_PSELSCK = p15,
-
- I2C_SDA0 = p30,
- I2C_SCL0 = p7,
-
- D0 = p12,
- D1 = p13,
- D2 = p14,
- D3 = p15,
- D4 = p16,
- D5 = p17,
- D6 = p18,
- D7 = p19,
-
- D8 = p20,
- D9 = p23,
- D10 = p24,
- D11 = p25,
- D12 = p28,
- D13 = p29,
-
- D14 = p30,
- D15 = p7,
-
- A0 = p1,
- A1 = p2,
- A2 = p3,
- A3 = p4,
- A4 = p5,
- A5 = p6,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullDown = 1,
- PullUp = 3,
- PullDefault = PullUp
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 3
+
+typedef enum {
+ p0 = 0,
+ p1 = 1,
+ p2 = 2,
+ p3 = 3,
+ p4 = 4,
+ p5 = 5,
+ p6 = 6,
+ p7 = 7,
+ p8 = 8,
+ p9 = 9,
+ p10 = 10,
+ p11 = 11,
+ p12 = 12,
+ p13 = 13,
+ p14 = 14,
+ p15 = 15,
+ p16 = 16,
+ p17 = 17,
+ p18 = 18,
+ p19 = 19,
+ p20 = 20,
+ p21 = 21,
+ p22 = 22,
+ p23 = 23,
+ p24 = 24,
+ p25 = 25,
+ p26 = 26,
+ p27 = 27,
+ p28 = 28,
+ p29 = 29,
+ p30 = 30,
+
+ P0_0 = p0,
+ P0_1 = p1,
+ P0_2 = p2,
+ P0_3 = p3,
+ P0_4 = p4,
+ P0_5 = p5,
+ P0_6 = p6,
+ P0_7 = p7,
+
+ P0_8 = p8,
+ P0_9 = p9,
+ P0_10 = p10,
+ P0_11 = p11,
+ P0_12 = p12,
+ P0_13 = p13,
+ P0_14 = p14,
+ P0_15 = p15,
+
+ P0_16 = p16,
+ P0_17 = p17,
+ P0_18 = p18,
+ P0_19 = p19,
+ P0_20 = p20,
+ P0_21 = p21,
+ P0_22 = p22,
+ P0_23 = p23,
+
+ P0_24 = p24,
+ P0_25 = p25,
+ P0_26 = p26,
+ P0_27 = p27,
+ P0_28 = p28,
+ P0_29 = p29,
+ P0_30 = p30,
+
+ LED1 = p21,
+ LED2 = p22,
+ LED3 = p23,
+ LED4 = p24,
+
+ BUTTON1 = p17,
+ BUTTON2 = p18,
+ BUTTON3 = p19,
+ BUTTON4 = p20,
+
+ RX_PIN_NUMBER = p11,
+ TX_PIN_NUMBER = p9,
+ CTS_PIN_NUMBER = p10,
+ RTS_PIN_NUMBER = p8,
+
+ // mBed interface Pins
+ USBTX = TX_PIN_NUMBER,
+ USBRX = RX_PIN_NUMBER,
+
+ SPI_PSELMOSI0 = p25,
+ SPI_PSELMISO0 = p28,
+ SPI_PSELSS0 = p24,
+ SPI_PSELSCK0 = p29,
+
+ SPI_PSELMOSI1 = p13,
+ SPI_PSELMISO1 = p14,
+ SPI_PSELSS1 = p12,
+ SPI_PSELSCK1 = p15,
+
+ SPIS_PSELMOSI = p13,
+ SPIS_PSELMISO = p14,
+ SPIS_PSELSS = p12,
+ SPIS_PSELSCK = p15,
+
+ I2C_SDA0 = p30,
+ I2C_SCL0 = p7,
+
+ D0 = p12,
+ D1 = p13,
+ D2 = p14,
+ D3 = p15,
+ D4 = p16,
+ D5 = p17,
+ D6 = p18,
+ D7 = p19,
+
+ D8 = p20,
+ D9 = p23,
+ D10 = p24,
+ D11 = p25,
+ D12 = p28,
+ D13 = p29,
+
+ D14 = p30,
+ D15 = p7,
+
+ A0 = p1,
+ A1 = p2,
+ A2 = p3,
+ A3 = p4,
+ A4 = p5,
+ A5 = p6,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 1,
+ PullUp = 3,
+ PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif