Amit Gandhi
t
Fork of
mbed-dev
by 
mbed official
Diff: targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h
- Revision:
- 23:ee8ca7052b3c
- Parent:
- 0:9b334a45a8ff
- Child:
- 144:ef7eb2e8f9f7
diff -r 9c52de9bc1d7 -r ee8ca7052b3c targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h Tue Nov 17 10:15:10 2015 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h Tue Nov 17 14:45:12 2015 +0000
@@ -1,6 +1,6 @@
/* mbed Microcontroller Library
*******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
+ * Copyright (c) 2015, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -37,11 +37,19 @@
#endif
// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
+ ((PUPD & 0x07) << 4) |\
+ ((AFNUM & 0x0F) << 7)))
+
+#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
+ ((PUPD & 0x07) << 4) |\
+ ((AFNUM & 0x0F) << 7) |\
+ ((CHANNEL & 0x0F) << 11) |\
+ ((INVERTED & 0x01) << 15)))
+
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
#define STM_MODE_INPUT (0)
@@ -193,96 +201,10 @@
PH_0 = 0x70,
PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
-
- PJ_0 = 0x90,
- PJ_1 = 0x91,
- PJ_2 = 0x92,
- PJ_3 = 0x93,
- PJ_4 = 0x94,
- PJ_5 = 0x95,
- PJ_6 = 0x96,
- PJ_7 = 0x97,
- PJ_8 = 0x98,
- PJ_9 = 0x99,
- PJ_10 = 0x9A,
- PJ_11 = 0x9B,
- PJ_12 = 0x9C,
- PJ_13 = 0x9D,
- PJ_14 = 0x9E,
- PJ_15 = 0x9F,
-
-
- PK_0 = 0xA0,
- PK_1 = 0xA1,
- PK_2 = 0xA2,
- PK_3 = 0xA3,
- PK_4 = 0xA4,
- PK_5 = 0xA5,
- PK_6 = 0xA6,
- PK_7 = 0xA7,
-
- // Arduino connector namings
-/*
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-*/
// Generic signals namings
- LED1 = PG_13,
- LED2 = PG_14,
+ LED1 = PG_13, // Corresponds to LD3 on MB1075B
+ LED2 = PG_14, // Corresponds to LD4 on MB1075B
LED3 = PG_13,
LED4 = PG_14,
USER_BUTTON = PA_0,
@@ -290,14 +212,6 @@
SERIAL_RX = PA_10,
USBTX = PA_9,
USBRX = PA_10,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PA_4,
- PWM_OUT = PB_3,
-
// Not connected
NC = (int)0xFFFFFFFF
} PinName;