t
Fork of mbed-dev by
Diff: targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L053C8/stm32l0xx.h
- Revision:
- 0:9b334a45a8ff
- Child:
- 113:b3775bf36a83
diff -r 000000000000 -r 9b334a45a8ff targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L053C8/stm32l0xx.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L053C8/stm32l0xx.h Thu Oct 01 15:25:22 2015 +0300 @@ -0,0 +1,233 @@ +/** + ****************************************************************************** + * @file stm32l0xx.h + * @author MCD Application Team + * @version V1.2.0 + * @date 06-February-2015 + * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32L0xx devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_HAL_DRIVER" + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l0xx + * @{ + */ + +#ifndef __STM32L0xx_H +#define __STM32L0xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32L0) +#define STM32L0 +#endif /* STM32L0 */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) \ + && !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx) + /* #define STM32L051xx */ /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8 Devices */ + /* #define STM32L052xx */ /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8 Devices */ +#define STM32L053xx /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */ + /* #define STM32L061xx */ /*!< */ + /* #define STM32L062xx */ /*!< STM32L062K8 */ + /* #define STM32L063xx */ /*!< STM32L063C8, STM32L063R8 */ + /* #define STM32L071xx */ /*!< */ + /* #define STM32L072xx */ /*!< */ + /* #define STM32L073xx */ /*!< STM32L073V8, STM32L073VB, STM32L073RB, STM32L073VZ, STM32L073RZ Devices */ + /* #define STM32L081xx */ /*!< */ + /* #define STM32L082xx */ /*!< */ + /* #define STM32L083xx */ /*!< */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ +#define USE_HAL_DRIVER +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V1.2.0 + */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32L0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\ + |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\ + |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\ + |(__CMSIS_DEVICE_HAL_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32L031xx) + #include "stm32l031xx.h" +#elif defined(STM32L041xx) + #include "stm32l041xx.h" +#elif defined(STM32L051xx) + #include "stm32l051xx.h" +#elif defined(STM32L052xx) + #include "stm32l052xx.h" +#elif defined(STM32L053xx) + #include "stm32l053xx.h" +#elif defined(STM32L062xx) + #include "stm32l062xx.h" +#elif defined(STM32L063xx) + #include "stm32l063xx.h" +#elif defined(STM32L061xx) + #include "stm32l061xx.h" +#elif defined(STM32L071xx) + #include "stm32l071xx.h" +#elif defined(STM32L072xx) + #include "stm32l072xx.h" +#elif defined(STM32L073xx) + #include "stm32l073xx.h" +#elif defined(STM32L082xx) + #include "stm32l082xx.h" +#elif defined(STM32L083xx) + #include "stm32l083xx.h" +#elif defined(STM32L081xx) + #include "stm32l081xx.h" +#else + #error "Please select first the target STM32L0xx device used in your application (in stm32l0xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macro + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32l0xx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32L0xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/