t
Fork of mbed-dev by
targets/hal/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAML21J18A/PeripheralNames.h
- Committer:
- mbed_official
- Date:
- 2015-11-09
- Revision:
- 18:da299f395b9e
File content as of revision 18:da299f395b9e:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PERIPHERALNAMES_H #define MBED_PERIPHERALNAMES_H #include <compiler.h> #include "cmsis.h" #include "PinNames.h" #ifdef __cplusplus extern "C" { #endif #define _SERCOM_SPI_NAME(n, unused) \ SPI##n, #define _SERCOM_PAD_NAME(n, pad) \ SERCOM##n##_PAD##pad = ((n & 0xF) | ((pad & 0xF) << 4)), #define _SERCOM_I2C_NAME(n, unused) \ I2C##n, typedef enum { UART_0 = (int)0x42000000UL, // Base address of SERCOM0 UART_1 = (int)0x42000400UL, // Base address of SERCOM1 UART_2 = (int)0x42000800UL, // Base address of SERCOM2 UART_3 = (int)0x42000C00UL, // Base address of SERCOM3 UART_4 = (int)0x42001000UL, // Base address of SERCOM4 UART_5 = (int)0x43000400UL // Base address of SERCOM5 } UARTName; typedef enum { ADC_0 = 0x0ul, ADC_1 = 0x1ul, ADC_2 = 0x2ul, ADC_3 = 0x3ul, ADC_4 = 0x4ul, ADC_5 = 0x5ul, ADC_6 = 0x6ul, ADC_7 = 0x7ul, ADC_8 = 0x8ul, ADC_9 = 0x9ul, ADC_10 = 0xAul, ADC_11 = 0xBul, ADC_12 = 0xCul, ADC_13 = 0xDul, ADC_14 = 0xEul, ADC_15 = 0xFul, ADC_16 = 0x10ul, ADC_17 = 0x11ul, ADC_18 = 0x12ul, ADC_19 = 0x13ul } ADCName; typedef enum { DAC_0 = 0x42003000UL } DACName; typedef enum { // for each channel EXTINT_0 = 0, EXTINT_1, EXTINT_2, EXTINT_3, EXTINT_4, EXTINT_5, EXTINT_6, EXTINT_7, EXTINT_8, EXTINT_9, EXTINT_10, EXTINT_11, EXTINT_12, EXTINT_13, EXTINT_14, EXTINT_15 } EXTINTName; typedef enum { MREPEAT(SERCOM_INST_NUM, _SERCOM_SPI_NAME, ~) } SPIName; typedef enum { MREPEAT(SERCOM_INST_NUM, _SERCOM_I2C_NAME, ~) } I2CName; typedef enum { /* Pad 0 definitions */ MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 0) /* Pad 1 definitions */ MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 1) /* Pad 2 definitions */ MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 2) /* Pad 3 definitions */ MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 3) } SercomPadName; typedef enum { PWM_0 = (0x42001400UL), /**< \brief (TCC0) APB Base Address */ PWM_1 = (0x42001800UL), /**< \brief (TCC1) APB Base Address */ PWM_2 = (0x42001C00UL), /**< \brief (TCC2) APB Base Address */ } PWMName; struct pwm_pin_channel { PinName pin; PWMName pwm; uint8_t channel_index; }; struct dac_pin_channel { PinName pin; DACName dac; uint8_t channel_index; }; #define STDIO_UART_TX USBTX #define STDIO_UART_RX USBRX #define STDIO_UART UART_3 // Default peripherals #define MBED_SPI0 PA06, PA04, PA07, PA05 #define MBED_UART0 PB08, PB09 #define MBED_UARTUSB USBTX, USBRX #define MBED_I2C0 PA08, PA09 #define MBED_ANALOGIN0 PB05 #define MBED_ANALOGIN1 PA03 #define MBED_ANALOGIN2 PA06 #define MBED_ANALOGIN3 PA07 #define MBED_ANALOGIN4 PB02 #define MBED_ANALOGIN5 PB03 #define MBED_ANALOGIN7 PA08 #define MBED_ANALOGIN8 PA09 #define MBED_PWMOUT0 PB12 #define MBED_PWMOUT1 PB13 #ifdef __cplusplus } #endif #endif