t
Fork of mbed-dev by
targets/TARGET_RENESAS/TARGET_VK_RZ_A1H/PeripheralNames.h
- Committer:
- amithy
- Date:
- 2017-11-09
- Revision:
- 178:c26431f84b0d
- Parent:
- 149:156823d33999
File content as of revision 178:c26431f84b0d:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PERIPHERALNAMES_H #define MBED_PERIPHERALNAMES_H #include "cmsis.h" #include "PinNames.h" #ifdef __cplusplus extern "C" { #endif typedef enum { UART0, UART1, UART2, UART3, UART4, UART5, UART6, UART7, } UARTName; // PWMType & 1 == 1 then have to use PWDTR[12] == 1 typedef enum { PWM1A = 0, PWM1B, PWM1C, PWM1D, PWM1E, PWM1F, PWM1G, PWM1H, PWM2A = 0x10, PWM2B, PWM2C, PWM2D, PWM2E, PWM2F, PWM2G, PWM2H, } PWMType; typedef enum { TIOC0A = 0, TIOC0B, TIOC0C, TIOC0D, TIOC1A = 0x10, TIOC1B, TIOC2A = 0x20, TIOC2B, TIOC3A = 0x30, TIOC3B, TIOC3C, TIOC3D, TIOC4A = 0x40, TIOC4B, TIOC4C, TIOC4D, } MTU2_PWMType; typedef enum { PWM0_PIN = 0, PWM1_PIN, PWM2_PIN, PWM3_PIN, PWM4_PIN, PWM5_PIN, PWM6_PIN, PWM7_PIN, PWM8_PIN, PWM9_PIN, PWM10_PIN, PWM11_PIN, PWM12_PIN, #ifdef MAX_PERI PWM13_PIN, PWM14_PIN, PWM15_PIN, MTU2_PWM0_PIN = 0x20, MTU2_PWM1_PIN, MTU2_PWM2_PIN, MTU2_PWM3_PIN, MTU2_PWM4_PIN, MTU2_PWM5_PIN, MTU2_PWM6_PIN, MTU2_PWM7_PIN, MTU2_PWM8_PIN, MTU2_PWM9_PIN, MTU2_PWM10_PIN, MTU2_PWM11_PIN, MTU2_PWM12_PIN, MTU2_PWM13_PIN, MTU2_PWM14_PIN, MTU2_PWM15_PIN, MTU2_PWM16_PIN, MTU2_PWM17_PIN, MTU2_PWM18_PIN, MTU2_PWM19_PIN, MTU2_PWM20_PIN, MTU2_PWM21_PIN, MTU2_PWM22_PIN, MTU2_PWM23_PIN, MTU2_PWM23_PIN, MTU2_PWM24_PIN, MTU2_PWM25_PIN, MTU2_PWM26_PIN, #else MTU2_PWM0_PIN = 0x20, MTU2_PWM1_PIN, MTU2_PWM2_PIN, MTU2_PWM3_PIN, MTU2_PWM4_PIN, MTU2_PWM5_PIN, MTU2_PWM6_PIN, MTU2_PWM7_PIN, MTU2_PWM8_PIN, MTU2_PWM9_PIN, MTU2_PWM10_PIN, MTU2_PWM11_PIN, #endif } PWMName; typedef enum { AN0= 0, AN1= 1, AN2= 2, AN3= 3, AN4= 4, AN5= 5, AN6= 6, AN7= 7, } ADCName; typedef enum { SPI_1 = 1, SPI_2, SPI_3, SPI_4, } SPIName; typedef enum { I2C_0 = 0, I2C_1, I2C_2, I2C_3 } I2CName; typedef enum { CAN_0 = 0, CAN_1, CAN_2, CAN_3, CAN_4 } CANName; #define STDIO_UART_TX USBTX #define STDIO_UART_RX USBRX #define STDIO_UART UART3 #ifdef __cplusplus } #endif #endif