t
Fork of mbed-dev by
targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h
- Committer:
- bogdanm
- Date:
- 2015-10-01
- Revision:
- 0:9b334a45a8ff
- Child:
- 23:ee8ca7052b3c
File content as of revision 0:9b334a45a8ff:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif // See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM #define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0))) #define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0))) #define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) #define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) #define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) #define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F) #define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01) #define STM_MODE_INPUT (0) #define STM_MODE_OUTPUT_PP (1) #define STM_MODE_OUTPUT_OD (2) #define STM_MODE_AF_PP (3) #define STM_MODE_AF_OD (4) #define STM_MODE_ANALOG (5) #define STM_MODE_IT_RISING (6) #define STM_MODE_IT_FALLING (7) #define STM_MODE_IT_RISING_FALLING (8) #define STM_MODE_EVT_RISING (9) #define STM_MODE_EVT_FALLING (10) #define STM_MODE_EVT_RISING_FALLING (11) #define STM_MODE_IT_EVT_RESET (12) // High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) // Low nibble = pin number #define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) #define STM_PIN(X) ((uint32_t)(X) & 0xF) typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; typedef enum { PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23, PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27, PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B, PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F, PD_0 = 0x30, PD_1 = 0x31, PD_2 = 0x32, PD_3 = 0x33, PD_4 = 0x34, PD_5 = 0x35, PD_6 = 0x36, PD_7 = 0x37, PD_8 = 0x38, PD_9 = 0x39, PD_10 = 0x3A, PD_11 = 0x3B, PD_12 = 0x3C, PD_13 = 0x3D, PD_14 = 0x3E, PD_15 = 0x3F, PE_0 = 0x40, PE_1 = 0x41, PE_2 = 0x42, PE_3 = 0x43, PE_4 = 0x44, PE_5 = 0x45, PE_6 = 0x46, PE_7 = 0x47, PE_8 = 0x48, PE_9 = 0x49, PE_10 = 0x4A, PE_11 = 0x4B, PE_12 = 0x4C, PE_13 = 0x4D, PE_14 = 0x4E, PE_15 = 0x4F, PF_0 = 0x50, PF_1 = 0x51, PF_2 = 0x52, PF_3 = 0x53, PF_4 = 0x54, PF_5 = 0x55, PF_6 = 0x56, PF_7 = 0x57, PF_8 = 0x58, PF_9 = 0x59, PF_10 = 0x5A, PF_11 = 0x5B, PF_12 = 0x5C, PF_13 = 0x5D, PF_14 = 0x5E, PF_15 = 0x5F, PG_0 = 0x60, PG_1 = 0x61, PG_2 = 0x62, PG_3 = 0x63, PG_4 = 0x64, PG_5 = 0x65, PG_6 = 0x66, PG_7 = 0x67, PG_8 = 0x68, PG_9 = 0x69, PG_10 = 0x6A, PG_11 = 0x6B, PG_12 = 0x6C, PG_13 = 0x6D, PG_14 = 0x6E, PG_15 = 0x6F, PH_0 = 0x70, PH_1 = 0x71, PH_2 = 0x72, PH_3 = 0x73, PH_4 = 0x74, PH_5 = 0x75, PH_6 = 0x76, PH_7 = 0x77, PH_8 = 0x78, PH_9 = 0x79, PH_10 = 0x7A, PH_11 = 0x7B, PH_12 = 0x7C, PH_13 = 0x7D, PH_14 = 0x7E, PH_15 = 0x7F, PI_0 = 0x80, PI_1 = 0x81, PI_2 = 0x82, PI_3 = 0x83, PI_4 = 0x84, PI_5 = 0x85, PI_6 = 0x86, PI_7 = 0x87, PI_8 = 0x88, PI_9 = 0x89, PI_10 = 0x8A, PI_11 = 0x8B, PI_12 = 0x8C, PI_13 = 0x8D, PI_14 = 0x8E, PI_15 = 0x8F, PJ_0 = 0x90, PJ_1 = 0x91, PJ_2 = 0x92, PJ_3 = 0x93, PJ_4 = 0x94, PJ_5 = 0x95, PJ_6 = 0x96, PJ_7 = 0x97, PJ_8 = 0x98, PJ_9 = 0x99, PJ_10 = 0x9A, PJ_11 = 0x9B, PJ_12 = 0x9C, PJ_13 = 0x9D, PJ_14 = 0x9E, PJ_15 = 0x9F, PK_0 = 0xA0, PK_1 = 0xA1, PK_2 = 0xA2, PK_3 = 0xA3, PK_4 = 0xA4, PK_5 = 0xA5, PK_6 = 0xA6, PK_7 = 0xA7, // Arduino connector namings /* A0 = PA_0, A1 = PA_1, A2 = PA_4, A3 = PB_0, A4 = PC_1, A5 = PC_0, D0 = PA_3, D1 = PA_2, D2 = PA_10, D3 = PB_3, D4 = PB_5, D5 = PB_4, D6 = PB_10, D7 = PA_8, D8 = PA_9, D9 = PC_7, D10 = PB_6, D11 = PA_7, D12 = PA_6, D13 = PA_5, D14 = PB_9, D15 = PB_8, */ // Generic signals namings LED1 = PG_13, LED2 = PG_14, LED3 = PG_13, LED4 = PG_14, USER_BUTTON = PA_0, SERIAL_TX = PA_9, SERIAL_RX = PA_10, USBTX = PA_9, USBRX = PA_10, I2C_SCL = PB_8, I2C_SDA = PB_9, SPI_MOSI = PA_7, SPI_MISO = PA_6, SPI_SCK = PA_5, SPI_CS = PA_4, PWM_OUT = PB_3, // Not connected NC = (int)0xFFFFFFFF } PinName; typedef enum { PullNone = 0, PullUp = 1, PullDown = 2, OpenDrain = 3, PullDefault = PullNone } PinMode; #ifdef __cplusplus } #endif #endif