Diff: targets/hal/TARGET_Atmel/TARGET_SAM_CortexM4/TARGET_SAMG55J19/SAMG55_XPLAINED_PRO/samg55_xplained_pro.h

Revision:

107:414e9c822e99

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_Atmel/TARGET_SAM_CortexM4/TARGET_SAMG55J19/SAMG55_XPLAINED_PRO/samg55_xplained_pro.h	Tue Apr 05 18:15:12 2016 +0100
@@ -0,0 +1,731 @@
+/**
+ * \file
+ *
+ * \brief SAMG55 Xplained Pro board definition
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef SAMG55_XPLAINED_PRO_H_INCLUDED
+#define SAMG55_XPLAINED_PRO_H_INCLUDED
+
+#include <conf_board.h>
+#include <compiler.h>
+
+/**
+ * \ingroup group_common_boards
+ * \defgroup samg55_xplained_pro_group SAMG55 Xplained Pro board
+ *
+ * @{
+ */
+
+void system_board_init(void);
+
+/**
+ * \defgroup samg55_config_group Configuration
+ *
+ * Symbols to use for configuring the board and its initialization.
+ *
+ * @{
+ */
+#ifdef __DOXYGEN__
+
+/* ! \name Initialization */
+/* @{ */
+
+/**
+ * \def CONF_BOARD_KEEP_WATCHDOG_AT_INIT
+ * \brief If defined, the watchdog will remain enabled
+ *
+ * If this symbol is defined, the watchdog is left running with its current
+ * configuration. Otherwise, it is disabled during board initialization.
+ */
+# ifndef CONF_BOARD_KEEP_WATCHDOG_AT_INIT
+#  define CONF_BOARD_KEEP_WATCHDOG_AT_INIT
+# endif
+
+/* @} */
+
+#endif /* __DOXYGEN__ */
+/**@} */
+
+/**
+ * \defgroup samg55_xplained_pro_features_group Features
+ *
+ * Symbols that describe features and capabilities of the board.
+ *
+ * @{
+ */
+
+/** Name string macro */
+#define BOARD_NAME                "SAMG55_XPLAINED_PRO"
+
+/** \name Resonator definitions
+ *  @{ */
+#define BOARD_FREQ_SLCK_XTAL      (32768U)
+#define BOARD_FREQ_SLCK_BYPASS    (32768U)
+#define BOARD_FREQ_MAINCK_XTAL    0 /* Not Mounted */
+#define BOARD_FREQ_MAINCK_BYPASS  0 /* Not Mounted */
+#define BOARD_MCK                 CHIP_FREQ_CPU_MAX
+/*TBD startup time needs to be adjusted according to measurements */
+#define BOARD_OSC_STARTUP_US      15625
+
+/** @} */
+
+/** \name LED0 definitions
+ *  @{ */
+#define LED0_GPIO     (PIO_PA6_IDX)
+#define LED0_FLAGS    (PIO_OUTPUT_1 | PIO_DEFAULT)
+
+#define LED0_PIN                  IOPORT_CREATE_PIN(PIOA, 6)
+#define LED0_ACTIVE_LEVEL         false
+#define LED0_INACTIVE_LEVEL       !LED0_ACTIVE_LEVEL
+/** @} */
+
+/** \name SW0 definitions
+ *  @{ */
+#define SW0_PIN                   IOPORT_CREATE_PIN(PIOA, 2)
+#define SW0_ACTIVE                false
+#define SW0_INACTIVE              !SW0_ACTIVE
+#define SW0_SUPC_INPUT            2
+/** @} */
+
+/**
+ * Wrapper macros for SW0, to ensure common naming across all Xplained Pro
+ * boards.
+ */
+#define PIN_SW0      {PIO_PA2, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
+#define PIN_SW0_MASK PIO_PA2
+#define PIN_SW0_PIO  PIOA
+#define PIN_SW0_ID   ID_PIOA
+#define PIN_SW0_TYPE PIO_INPUT
+#define PIN_SW0_ATTR (PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
+//@}
+
+/**
+ * \name LED #0 definitions
+ *
+ * Wrapper macros for LED0, to ensure common naming across all Xplained Pro
+ * boards.
+ *
+ *  @{ */
+#define LED_0_NAME                "LED0 (yellow)"
+#define LED_0_PIN                 LED0_PIN
+#define LED_0_ACTIVE              LED0_ACTIVE_LEVEL
+#define LED_0_INACTIVE            LED0_INACTIVE_LEVEL
+
+#define PIN_LED_0      {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+#define PIN_LED_0_MASK PIO_PA16
+#define PIN_LED_0_PIO  PIOA
+#define PIN_LED_0_ID   ID_PIOA
+#define PIN_LED_0_TYPE PIO_OUTPUT_1
+#define PIN_LED_0_ATTR PIO_DEFAULT
+/** @} */
+
+/** Number of on-board LEDs */
+#define LED_COUNT                 1
+
+/**
+ * \name Button #0 definitions
+ *
+ * Wrapper macros for SW0, to ensure common naming across all Xplained Pro
+ * boards.
+ *
+ *  @{ */
+#define BUTTON_0_NAME             "SW0"
+#define BUTTON_0_PIN              SW0_PIN
+#define BUTTON_0_ACTIVE           SW0_ACTIVE
+#define BUTTON_0_INACTIVE         SW0_INACTIVE
+#define BUTTON_0_SUPC_INPUT       SW0_SUPC_INPUT
+
+#define PUSHBUTTON_1_NAME    "SW0"
+#define PIN_PUSHBUTTON_1 {PIO_PA2, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
+#define PIN_PUSHBUTTON_1_MASK PIO_PA2
+#define PIN_PUSHBUTTON_1_PIO  PIOA
+#define PIN_PUSHBUTTON_1_ID   ID_PIOA
+#define PIN_PUSHBUTTON_1_TYPE PIO_INPUT
+#define PIN_PUSHBUTTON_1_ATTR PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE
+/** @} */
+
+/** Number of on-board buttons */
+#define BUTTON_COUNT 1
+
+#define CONSOLE_UART               USART7
+#define CONSOLE_UART_ID            ID_FLEXCOM7
+/** USART7 pins (TXD7 and RXD7) definitions, PA27,28. */
+#define PINS_USART7        (PIO_PA27B_RXD7| PIO_PA28B_TXD7)
+#define PINS_USART7_FLAGS  (IOPORT_MODE_MUX_B)
+
+#define PINS_USART7_PORT   IOPORT_PIOA
+#define PINS_USART7_MASK   (PIO_PA27B_RXD7 | PIO_PA28B_TXD7)
+#define PINS_USART7_PIO    PIOA
+#define PINS_USART7_ID     ID_PIOA
+#define PINS_USART7_TYPE   PIO_PERIPH_B
+#define PINS_USART7_ATTR   PIO_DEFAULT
+
+/** PCK1 pin definition (PA17) */
+#define PIN_PCK1         (PIO_PA17_IDX)
+#define PIN_PCK1_MUX     (IOPORT_MODE_MUX_B)
+#define PIN_PCK1_FLAGS   (IOPORT_MODE_MUX_B)
+#define PIN_PCK1_PORT    IOPORT_PIOA
+#define PIN_PCK1_MASK    PIO_PA17B_PCK1
+#define PIN_PCK1_PIO     PIOA
+#define PIN_PCK1_ID      ID_PIOA
+#define PIN_PCK1_TYPE    PIO_PERIPH_B
+#define PIN_PCK1_ATTR    PIO_DEFAULT
+
+#define PIN_TC0_TIOA0         (PIO_PA0_IDX)
+#define PIN_TC0_TIOA0_MUX     (IOPORT_MODE_MUX_B)
+#define PIN_TC0_TIOA0_FLAGS   (PIO_PERIPH_B | PIO_DEFAULT)
+
+#define PIN_TC0_TIOA1         (PIO_PA23_IDX)
+#define PIN_TC0_TIOA1_MUX     (IOPORT_MODE_MUX_B)
+#define PIN_TC0_TIOA1_FLAGS   (PIO_PERIPH_B | PIO_DEFAULT)
+//! \name SPI
+//@{
+/** SPI MISO pin definition. */
+#define SPI_MISO_GPIO         (PIO_PA12_IDX)
+#define SPI_MISO_FLAGS       (IOPORT_MODE_MUX_A)
+/** SPI MOSI pin definition. */
+#define SPI_MOSI_GPIO         (PIO_PA13_IDX)
+#define SPI_MOSI_FLAGS       (IOPORT_MODE_MUX_A)
+/** SPI SPCK pin definition. */
+#define SPI_SPCK_GPIO         (PIO_PA14_IDX)
+#define SPI_SPCK_FLAGS       (IOPORT_MODE_MUX_A)
+
+/** SPI chip select 0 pin definition. */
+#define SPI_NPCS0_GPIO        (PIO_PA11_IDX)
+#define SPI_NPCS0_FLAGS      (IOPORT_MODE_MUX_A)
+/** SPI chip select 1 pin definition. */
+#define SPI_NPCS1_GPIO        (PIO_PA5_IDX)
+#define SPI_NPCS1_FLAGS      (IOPORT_MODE_MUX_B)
+//@}
+
+/** \name Extension header #1 pin definitions
+ *  @{
+ */
+#define EXT1_PIN_3                IOPORT_CREATE_PIN(PIOA, 17)
+#define EXT1_PIN_4                IOPORT_CREATE_PIN(PIOA, 18)
+#define EXT1_PIN_5                IOPORT_CREATE_PIN(PIOA, 26)
+#define EXT1_PIN_6                IOPORT_CREATE_PIN(PIOA, 25)
+#define EXT1_PIN_7                IOPORT_CREATE_PIN(PIOA, 0)
+#define EXT1_PIN_8                IOPORT_CREATE_PIN(PIOA, 23)
+#define EXT1_PIN_9                IOPORT_CREATE_PIN(PIOA, 24)
+#define EXT1_PIN_10               IOPORT_CREATE_PIN(PIOA, 29)
+#define EXT1_PIN_11               IOPORT_CREATE_PIN(PIOB, 10)
+#define EXT1_PIN_12               IOPORT_CREATE_PIN(PIOB, 11)
+#define EXT1_PIN_13               IOPORT_CREATE_PIN(PIOA, 9)
+#define EXT1_PIN_14               IOPORT_CREATE_PIN(PIOA, 10)
+#define EXT1_PIN_15               IOPORT_CREATE_PIN(PIOA, 11)
+#define EXT1_PIN_16               IOPORT_CREATE_PIN(PIOA, 13)
+#define EXT1_PIN_17               IOPORT_CREATE_PIN(PIOA, 12)
+#define EXT1_PIN_18               IOPORT_CREATE_PIN(PIOA, 14)
+/** @} */
+
+/** \name Extension header #1 pin definitions by function
+ *  @{
+ */
+#define EXT1_PIN_ADC_0            EXT1_PIN_3
+#define EXT1_PIN_ADC_1            EXT1_PIN_4
+#define EXT1_PIN_GPIO_0           EXT1_PIN_5
+#define EXT1_PIN_GPIO_1           EXT1_PIN_6
+#define EXT1_PIN_PWM_0            EXT1_PIN_7
+#define EXT1_PIN_PWM_1            EXT1_PIN_8
+#define EXT1_PIN_IRQ              EXT1_PIN_9
+#define EXT1_PIN_I2C_SDA          EXT1_PIN_11
+#define EXT1_PIN_I2C_SCL          EXT1_PIN_12
+#define EXT1_PIN_UART_RX          EXT1_PIN_13
+#define EXT1_PIN_UART_TX          EXT1_PIN_14
+#define EXT1_PIN_SPI_SS_1         EXT1_PIN_10
+#define EXT1_PIN_SPI_SS_0         EXT1_PIN_15
+#define EXT1_PIN_SPI_MOSI         EXT1_PIN_16
+#define EXT1_PIN_SPI_MISO         EXT1_PIN_17
+#define EXT1_PIN_SPI_SCK          EXT1_PIN_18
+/** @} */
+
+/** \name Extension header #1 ADC definitions
+ *  @{
+ */
+#define EXT1_ADC_MODULE           ADC
+#define EXT1_ADC_0_CHANNEL        0
+#define EXT1_ADC_1_CHANNEL        1
+/** @} */
+
+/** \name Extension header #1 PWM definitions
+ *  @{
+ */
+#define EXT1_PWM_MODULE           TC0
+#define EXT1_PWM_0_CHANNEL        0
+#define EXT1_PWM_0_MUX            IOPORT_MODE_MUX_B
+#define EXT1_PWM_1_CHANNEL        1
+#define EXT1_PWM_1_MUX            IOPORT_MODE_MUX_B
+/** @} */
+
+/** \name Extension header #1 IRQ/External interrupt definitions
+ *  @{
+ */
+#define EXT1_IRQ_MODULE           SUPC
+#define EXT1_IRQ_INPUT            11
+/** @} */
+
+/** \name Extension header #1 I2C definitions
+ *  @{
+ */
+#define EXT1_TWI_MODULE           TWI4
+#define EXT1_TWI_TWD_MUX          IOPORT_MODE_MUX_B
+#define EXT1_TWI_TWCK_MUX         IOPORT_MODE_MUX_B
+/** @} */
+
+/** \name Extension header #1 UART definitions
+ *  @{
+ */
+#define EXT1_UART_MODULE          USART0
+#define EXT1_UART_RXD_MUX         IOPORT_MODE_MUX_A
+#define EXT1_UART_TXD_MUX         IOPORT_MODE_MUX_A
+/** @} */
+
+/** \name Extension header #1 SPI definitions
+ *  @{
+ */
+#define EXT1_SPI_MODULE           SPI5
+#define EXT1_SPI_MISO_MUX         IOPORT_MODE_MUX_A
+#define EXT1_SPI_MOSI_MUX         IOPORT_MODE_MUX_A
+#define EXT1_SPI_SPCK_MUX         IOPORT_MODE_MUX_A
+#define EXT1_SPI_NPCS0_MUX        IOPORT_MODE_MUX_A
+/** @} */
+
+/** \name Extension header #3 pin definitions
+ *  @{
+ */
+#define EXT3_PIN_3                IOPORT_CREATE_PIN(PIOA, 19)
+#define EXT3_PIN_4                IOPORT_CREATE_PIN(PIOA, 20)
+#define EXT3_PIN_5                IOPORT_CREATE_PIN(PIOA, 30)
+#define EXT3_PIN_6                IOPORT_CREATE_PIN(PIOB, 15)
+#define EXT3_PIN_7                IOPORT_CREATE_PIN(PIOA, 1)
+#define EXT3_PIN_8                IOPORT_CREATE_PIN(PIOB, 13)
+#define EXT3_PIN_9                IOPORT_CREATE_PIN(PIOB, 3)
+#define EXT3_PIN_10               IOPORT_CREATE_PIN(PIOA, 15)
+#define EXT3_PIN_11               IOPORT_CREATE_PIN(PIOB, 8)
+#define EXT3_PIN_12               IOPORT_CREATE_PIN(PIOB, 9)
+#define EXT3_PIN_13               IOPORT_CREATE_PIN(PIOB, 1)
+#define EXT3_PIN_14               IOPORT_CREATE_PIN(PIOB, 0)
+#define EXT3_PIN_15               IOPORT_CREATE_PIN(PIOA, 5)
+#define EXT3_PIN_16               IOPORT_CREATE_PIN(PIOA, 13)
+#define EXT3_PIN_17               IOPORT_CREATE_PIN(PIOA, 12)
+#define EXT3_PIN_18               IOPORT_CREATE_PIN(PIOA, 14)
+/** @} */
+
+/** \name Extension header #3 pin definitions by function
+ *  @{
+ */
+#define EXT3_PIN_ADC_0            EXT3_PIN_3
+#define EXT3_PIN_ADC_1            EXT3_PIN_4
+#define EXT3_PIN_GPIO_0           EXT3_PIN_5
+#define EXT3_PIN_PWM_0            EXT3_PIN_7
+#define EXT3_PIN_IRQ              EXT3_PIN_9
+#define EXT3_PIN_I2C_SDA          EXT3_PIN_11
+#define EXT3_PIN_I2C_SCL          EXT3_PIN_12
+#define EXT3_PIN_UART_RX          EXT3_PIN_13
+#define EXT3_PIN_UART_TX          EXT3_PIN_14
+#define EXT3_PIN_SPI_SS_1         EXT3_PIN_10
+#define EXT3_PIN_SPI_SS_0         EXT3_PIN_15
+#define EXT3_PIN_SPI_MOSI         EXT3_PIN_16
+#define EXT3_PIN_SPI_MISO         EXT3_PIN_17
+#define EXT3_PIN_SPI_SCK          EXT3_PIN_18
+/** @} */
+
+/** \name Extension header #3 ADC definitions
+ *  @{
+ */
+#define EXT3_ADC_MODULE           ADC
+#define EXT3_ADC_0_CHANNEL        2
+#define EXT3_ADC_1_CHANNEL        3
+/** @} */
+
+/** \name Extension header #3 PWM definitions
+ *  @{
+ */
+#define EXT3_PWM_MODULE           TC2
+#define EXT3_PWM_0_CHANNEL        0
+#define EXT3_PWM_0_MUX            IOPORT_MODE_MUX_A
+/** @} */
+
+/** \name Extension header #3 IRQ/External interrupt definitions
+ *  @{
+ */
+#define EXT3_IRQ_MODULE           SUPC
+#define EXT3_IRQ_INPUT            10
+/** @} */
+
+/** \name Extension header #3 I2C definitions
+ *  @{
+ */
+#define EXT3_TWI_MODULE           TWI1
+#define EXT3_TWI_TWD_MUX          IOPORT_MODE_MUX_A
+#define EXT3_TWI_TWCK_MUX         IOPORT_MODE_MUX_A
+/** @} */
+
+/** \name Extension header #3 UART definitions
+ *  @{
+ */
+#define EXT3_UART_MODULE          UART0
+#define EXT3_UART_RXD_MUX         IOPORT_MODE_MUX_A
+#define EXT3_UART_TXD_MUX         IOPORT_MODE_MUX_A
+/** @} */
+
+/** \name Extension header #3 SPI definitions
+ *  @{
+ */
+#define EXT3_SPI_MODULE           SPI5
+#define EXT3_SPI_MISO_MUX         IOPORT_MODE_MUX_A
+#define EXT3_SPI_MOSI_MUX         IOPORT_MODE_MUX_A
+#define EXT3_SPI_SPCK_MUX         IOPORT_MODE_MUX_A
+#define EXT3_SPI_NPCS1_MUX        IOPORT_MODE_MUX_B
+/** @} */
+
+/** \name Extension header #4 pin definitions
+ *  @{
+ */
+#define EXT4_PIN_5                IOPORT_CREATE_PIN(PIOA, 31)
+#define EXT4_PIN_9                IOPORT_CREATE_PIN(PIOB, 14)
+#define EXT4_PIN_11               IOPORT_CREATE_PIN(PIOB, 10)
+#define EXT4_PIN_12               IOPORT_CREATE_PIN(PIOB, 11)
+/** @} */
+
+/** \name Extension header #4 pin definitions by function
+ *  @{
+ */
+#define EXT4_PIN_GPIO_0           EXT3_PIN_5
+#define EXT4_PIN_IRQ              EXT3_PIN_9
+#define EXT4_PIN_I2C_SDA          EXT3_PIN_11
+#define EXT4_PIN_I2C_SCL          EXT3_PIN_12
+/** @} */
+
+/** \name Extension header #4 IRQ/External interrupt definitions
+ *  @{
+ */
+#define EXT4_IRQ_MODULE           SUPC
+#define EXT4_IRQ_INPUT            14
+/** @} */
+
+/** \name Extension header #4 TWI definitions
+ *  @{
+ */
+#define EXT4_TWI_MODULE           TWI1
+#define EXT4_TWI_TWD_MUX          IOPORT_MODE_MUX_A
+#define EXT4_TWI_TWCK_MUX         IOPORT_MODE_MUX_A
+/** @} */
+
+/** \name Embedded debugger GPIO interface definitions
+ * @{
+ */
+#define EDBG_GPIO0_PIN            IOPORT_CREATE_PIN(PIOA, 15)
+#define EDBG_GPIO1_PIN            IOPORT_CREATE_PIN(PIOB, 3)
+#define EDBG_GPIO2_PIN            IOPORT_CREATE_PIN(PIOB, 4)
+#define EDBG_GPIO3_PIN            IOPROT_CREATE_PIN(PIOB, 9)
+/** @} */
+
+/** \name Embedded debugger USART interface definitions
+ * @{
+ */
+#define EDBG_UART_MODULE          USART
+#define EDBG_UART_RX_PIN          IOPORT_CREATE_PIN(PIOA, 5)
+#define EDBG_UART_RX_MUX          IOPORT_MODE_MUX_A
+#define EDBG_UART_TX_PIN          IOPORT_CREATE_PIN(PIOA, 6)
+#define EDBG_UART_TX_MUX          IOPORT_MODE_MUX_A
+/** @} */
+
+/** \name Embedded debugger I2C interface definitions
+ * @{
+ */
+#define EDBG_TWI_MODULE           TWI1
+#define EDBG_TWI_TWD_MUX          IOPORT_MODE_MUX_A
+#define EDBG_TWI_TWCK_MUX         IOPORT_MODE_MUX_A
+/** @} */
+
+/** \name Embedded debugger CDC Gateway USART interface definitions
+ * @{
+ */
+#define EDBG_CDC_UART_MODULE      UART0
+#define EDBG_CDC_UART_RX_PIN      IOPORT_CREATE_PIN(PIOA, 9)
+#define EDBG_CDC_UART_RX_MUX      IOPORT_MODE_MUX_A
+#define EDBG_CDC_UART_TX_PIN      IOPORT_CREATE_PIN(PIOA, 10)
+#define EDBG_CDC_UART_TX_MUX      IOPORT_MODE_MUX_A
+/** @} */
+
+//! \name OLED
+//@{
+/** OLED command/data select pin */
+#define UG_2832HSWEG04_DATA_CMD_GPIO   (PIO_PA30_IDX)
+/** OLED reset pin */
+#define UG_2832HSWEG04_RESET_GPIO      (PIO_PA15_IDX)
+/** OLED SPI configuration */
+#define UG_2832HSWEG04_SS               1
+#define UG_2832HSWEG04_BAUDRATE         5000000
+//! \name OLED dimensions
+//@{
+#define LCD_WIDTH_PIXELS                (128)
+#define LCD_HEIGHT_PIXELS               (32)
+//@}
+//@}
+
+/** \name TWI
+* @{
+*/
+/** TWI0 pin definitions */
+#define TWI0_DATA_GPIO   PIO_PA9_IDX
+#define TWI0_DATA_FLAGS  IOPORT_MODE_MUX_A
+#define TWI0_CLK_GPIO    PIO_PA10_IDX
+#define TWI0_CLK_FLAGS   IOPORT_MODE_MUX_A
+/** TWI1 pin definitions */
+#define TWI1_DATA_GPIO   PIO_PB2_IDX
+#define TWI1_DATA_FLAGS  IOPORT_MODE_MUX_A
+#define TWI1_CLK_GPIO    PIO_PB3_IDX
+#define TWI1_CLK_FLAGS   IOPORT_MODE_MUX_A
+/** TWI4 pin definitions */
+#define TWI4_DATA_GPIO   EXT1_PIN_11
+#define TWI4_DATA_FLAGS  IOPORT_MODE_MUX_A
+#define TWI4_CLK_GPIO    EXT1_PIN_12
+#define TWI4_CLK_FLAGS   IOPORT_MODE_MUX_A
+/** TWI6 pin definitions */
+#define TWI6_DATA_GPIO   EXT3_PIN_11
+#define TWI6_DATA_FLAGS  IOPORT_MODE_MUX_B
+#define TWI6_CLK_GPIO    EXT3_PIN_12
+#define TWI6_CLK_FLAGS   IOPORT_MODE_MUX_B
+/** @} */
+
+/** \name USART
+* @{
+*/
+/** USART0 pin definitions */
+#define USART0_RXD_GPIO	  EXT1_PIN_13
+#define USART0_RXD_FLAGS  IOPORT_MODE_MUX_A
+#define USART0_TXD_GPIO   EXT1_PIN_14
+#define USART0_TXD_FLAGS  IOPORT_MODE_MUX_A
+#define USART0_SCK_GPIO   EXT3_PIN_14
+#define USART0_SCK_FLAGS  IOPORT_MODE_MUX_A
+#define USART0_CTS_GPIO   EXT1_PIN_6
+#define USART0_CTS_FLAGS  IOPORT_MODE_MUX_A
+#define USART0_RTS_GPIO   EXT1_PIN_5
+#define USART0_RTS_FLAGS  IOPORT_MODE_MUX_A
+
+/** USART6 pin definitions */
+#define USART6_RXD_GPIO   EXT4_PIN_12
+#define USART6_RXD_FLAGS  IOPORT_MODE_MUX_B
+#define USART6_TXD_GPIO   EXT4_PIN_11
+#define USART6_TXD_FLAGS  IOPORT_MODE_MUX_B
+#define USART6_SCK_GPIO   EXT3_PIN_8
+#define USART6_SCK_FLAGS  IOPORT_MODE_MUX_B
+#define USART6_CTS_GPIO   EXT4_PIN_9
+#define USART6_CTS_FLAGS  IOPORT_MODE_MUX_B
+#define USART6_RTS_GPIO   EXT3_PIN_6
+#define USART6_RTS_FLAGS  IOPORT_MODE_MUX_B
+/** @} */
+
+//! \name I2S0
+//@{
+/** I2S0 SCK pin definition. */
+#define I2S0_SCK_GPIO        (PIO_PA0_IDX)
+#define I2S0_SCK_FLAGS       (IOPORT_MODE_MUX_A)
+/** I2S0 MCK pin definition. */
+#define I2S0_MCK_GPIO        (PIO_PA4_IDX)
+#define I2S0_MCK_FLAGS       (IOPORT_MODE_MUX_B)
+/** I2S0 SDI pin definition. */
+#define I2S0_SDI_GPIO        (PIO_PA2_IDX)
+#define I2S0_SDI_FLAGS       (IOPORT_MODE_MUX_B)
+/** I2S0 SDO pin definition. */
+#define I2S0_SDO_GPIO        (PIO_PA3_IDX)
+#define I2S0_SDO_FLAGS       (IOPORT_MODE_MUX_B)
+/** I2S0 WS pin definition. */
+#define I2S0_WS_GPIO         (PIO_PA1_IDX)
+#define I2S0_WS_FLAGS        (IOPORT_MODE_MUX_A)
+//@}
+
+//! \name I2S1
+//@{
+/** I2S1 SCK pin definition. */
+#define I2S1_SCK_GPIO        (PIO_PA19_IDX)
+#define I2S1_SCK_FLAGS       (IOPORT_MODE_MUX_B)
+/** I2S1 MCK pin definition. */
+#define I2S1_MCK_GPIO        (PIO_PA24_IDX)
+#define I2S1_MCK_FLAGS       (IOPORT_MODE_MUX_A)
+/** I2S1 SDI pin definition. */
+#define I2S1_SDI_GPIO        (PIO_PA22_IDX)
+#define I2S1_SDI_FLAGS       (IOPORT_MODE_MUX_B)
+/** I2S1 SDO pin definition. */
+#define I2S1_SDO_GPIO        (PIO_PA23_IDX)
+#define I2S1_SDO_FLAGS       (IOPORT_MODE_MUX_A)
+/** I2S1 WS pin definition. */
+#define I2S1_WS_GPIO         (PIO_PA20_IDX)
+#define I2S1_WS_FLAGS        (IOPORT_MODE_MUX_B)
+//@}
+
+//! \name IO1 button definitions */
+//@{
+/** Push button #1 definition. Attributes = pull-up + debounce + interrupt on rising edge. */
+#define PUSHBUTTON_1_NAME    "SW0"
+#define GPIO_PUSH_BUTTON_1   (PIO_PA2_IDX)
+#define GPIO_PUSH_BUTTON_1_FLAGS    (PIO_INPUT | PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
+//@}
+
+//! \name Light Sensor
+//@{
+#define LIGHT_SENSOR_GPIO   PIO_PA17_IDX
+#define LIGHT_SENSOR_FLAGS  PIO_INPUT
+//@}
+
+/** \name USB definitions
+ * @{
+ */
+#define PIN_USB_VBUS    {PIO_PB4, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP}
+#define USB_VBUS_FLAGS    (PIO_INPUT | PIO_DEBOUNCE | PIO_IT_EDGE)
+#define USB_VBUS_PIN_IRQn (PIOB_IRQn)
+#define USB_VBUS_PIN      (PIO_PB4_IDX)
+#define USB_VBUS_PIO_ID   (ID_PIOB)
+#define USB_VBUS_PIO_MASK (PIO_PB4)
+
+/** USB D- pin (System function) */
+#define PIN_USB_DM      {PIO_PA21}
+/** USB D+ pin (System function) */
+#define PIN_USB_DP      {PIO_PA22}
+/** @} */
+
+//! \name IO1 SD card definitions */
+//@{
+#define SD_MMC_SPI_MEM_CNT          1
+#define SD_MMC_0_CD_GPIO            (PIO_PA29_IDX)
+#define SD_MMC_0_CD_DIR             (IOPORT_DIR_INPUT)
+#define SD_MMC_0_CD_MODE            (IOPORT_MODE_PULLUP)
+#define SD_MMC_0_CD_DETECT_VALUE    0
+#define SD_MMC_SPI                  SPI5
+#define SD_MMC_SPI_0_CS             0
+#define SD_MMC_0_CD_PIO_ID          ID_PIOA
+/**
+ * Wrapper macros for IO1 SD, to ensure common naming across all Xplained Pro
+ * boards.
+ */
+#define SD_MMC_0_CD_FLAGS           (PIO_INPUT | PIO_PULLUP)
+#define SD_MMC_0_CD    {PIO_PA29, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
+#define SD_MMC_0_CD_MASK PIO_PA29
+#define SD_MMC_0_CD_PIO PIOA
+#define SD_MMC_0_CD_ID ID_PIOA
+#define SD_MMC_0_CD_TYPE PIO_INPUT
+#define SD_MMC_0_CD_ATTR (PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_EDGE)
+//@}
+
+//! \name IO1 temperature sensor definitions */
+//@{
+#define BOARD_AT30TSE_TWI          TWI4
+#define BOARD_AT30TSE_TWI_ID       ID_TWI4
+#define BOARD_TWI_SPEED            (400000u)
+#define BOARD_USING_AT30TSE        AT30TSE758
+#define BOARD_AT30TSE_DEVICE_ADDR  0x07
+//@}
+
+//! \name OLED1 led definitions */
+//@{
+#define OLED1_LED1_PIN                  EXT3_PIN_7
+#define OLED1_LED1_ACTIVE               false
+#define OLED1_LED1_INACTIVE             !OLED1_LED1_ACTIVE
+
+#define OLED1_LED2_PIN                  EXT3_PIN_8
+#define OLED1_LED2_ACTIVE               false
+#define OLED1_LED2_INACTIVE             !OLED1_LED2_ACTIVE
+
+#define OLED1_LED3_PIN                  EXT3_PIN_6
+#define OLED1_LED3_ACTIVE               false
+#define OLED1_LED3_INACTIVE             !OLED1_LED3_ACTIVE
+//@}
+
+//! \name OLED1 button definitions */
+//@{
+/** Push button #1 definition. Attributes = pull-up + debounce + interrupt on rising edge. */
+#define OLED1_PUSHBUTTON_1_NAME    "BUTTON 1"
+#define OLED1_GPIO_PUSH_BUTTON_1   (PIO_PB3_IDX)
+#define OLED1_GPIO_PUSH_BUTTON_1_FLAGS    (PIO_INPUT | PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
+
+#define OLED1_PIN_PUSHBUTTON_1    {PIO_PB3, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
+#define OLED1_PIN_PUSHBUTTON_1_MASK PIO_PB3
+#define OLED1_PIN_PUSHBUTTON_1_PIO PIOB
+#define OLED1_PIN_PUSHBUTTON_1_ID ID_PIOB
+#define OLED1_PIN_PUSHBUTTON_1_TYPE PIO_INPUT
+#define OLED1_PIN_PUSHBUTTON_1_ATTR (PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
+
+/** Push button #2 definition. Attributes = pull-up + debounce + interrupt on rising edge. */
+#define OLED1_PUSHBUTTON_2_NAME    "BUTTON 2"
+#define OLED1_GPIO_PUSH_BUTTON_2   (PIO_PA19_IDX)
+#define OLED1_GPIO_PUSH_BUTTON_2_FLAGS    (PIO_INPUT | PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
+
+#define OLED1_PIN_PUSHBUTTON_2    {PIO_PA19, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
+#define OLED1_PIN_PUSHBUTTON_2_MASK PIO_PA19
+#define OLED1_PIN_PUSHBUTTON_2_PIO PIOA
+#define OLED1_PIN_PUSHBUTTON_2_ID ID_PIOA
+#define OLED1_PIN_PUSHBUTTON_2_TYPE PIO_INPUT
+#define OLED1_PIN_PUSHBUTTON_2_ATTR (PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
+
+/** Push button #3 definition. Attributes = pull-up + debounce + interrupt on rising edge. */
+#define OLED1_PUSHBUTTON_3_NAME    "BUTTON 3"
+#define OLED1_GPIO_PUSH_BUTTON_3   (PIO_PA20_IDX)
+#define OLED1_GPIO_PUSH_BUTTON_3_FLAGS    (PIO_INPUT | PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
+
+#define OLED1_PIN_PUSHBUTTON_3    {PIO_PA20, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
+#define OLED1_PIN_PUSHBUTTON_3_MASK PIO_PA20
+#define OLED1_PIN_PUSHBUTTON_3_PIO PIOA
+#define OLED1_PIN_PUSHBUTTON_3_ID ID_PIOA
+#define OLED1_PIN_PUSHBUTTON_3_TYPE PIO_INPUT
+#define OLED1_PIN_PUSHBUTTON_3_ATTR (PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
+//@}
+
+//! \name PDM
+//@{
+/** PDM CLK pin definition. */
+#define PDM_CLK_GPIO        (PIO_PA10_IDX)
+#define PDM_CLK_FLAGS       (IOPORT_MODE_MUX_B)
+/** PDM DAT pin definition. */
+#define PDM_DAT_GPIO        (PIO_PA9_IDX)
+#define PDM_DAT_FLAGS       (IOPORT_MODE_MUX_B)
+//@}
+
+/** @} */
+
+/** @} */
+
+#endif  /* SAMG55_XPLAINED_PRO_H_INCLUDED */