Amit Gandhi / sensen_copy_2

t

Fork of mbed-dev by mbed official

targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PeripheralPins.c@148:21d94c44109e, 2016-09-30 (annotated)

Committer:
<>
Date:
Fri Sep 30 18:07:01 2016 +0100
Revision:
148:21d94c44109e
Parent:
144:ef7eb2e8f9f7 
This updates the lib to the mbed lib v127

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 *******************************************************************************
<> 144:ef7eb2e8f9f7 3 * Copyright (c) 2014, STMicroelectronics
<> 144:ef7eb2e8f9f7 4 * All rights reserved.
<> 144:ef7eb2e8f9f7 5 *
<> 144:ef7eb2e8f9f7 6 * Redistribution and use in source and binary forms, with or without
<> 144:ef7eb2e8f9f7 7 * modification, are permitted provided that the following conditions are met:
<> 144:ef7eb2e8f9f7 8 *
<> 144:ef7eb2e8f9f7 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 144:ef7eb2e8f9f7 10 * this list of conditions and the following disclaimer.
<> 144:ef7eb2e8f9f7 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 144:ef7eb2e8f9f7 12 * this list of conditions and the following disclaimer in the documentation
<> 144:ef7eb2e8f9f7 13 * and/or other materials provided with the distribution.
<> 144:ef7eb2e8f9f7 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 144:ef7eb2e8f9f7 15 * may be used to endorse or promote products derived from this software
<> 144:ef7eb2e8f9f7 16 * without specific prior written permission.
<> 144:ef7eb2e8f9f7 17 *
<> 144:ef7eb2e8f9f7 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 144:ef7eb2e8f9f7 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 144:ef7eb2e8f9f7 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 144:ef7eb2e8f9f7 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 144:ef7eb2e8f9f7 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 144:ef7eb2e8f9f7 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 144:ef7eb2e8f9f7 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 144:ef7eb2e8f9f7 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 144:ef7eb2e8f9f7 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 144:ef7eb2e8f9f7 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 144:ef7eb2e8f9f7 28 *******************************************************************************
<> 144:ef7eb2e8f9f7 29 */
<> 144:ef7eb2e8f9f7 30
<> 144:ef7eb2e8f9f7 31 #include "PeripheralPins.h"
<> 144:ef7eb2e8f9f7 32
<> 144:ef7eb2e8f9f7 33 // =====
<> 144:ef7eb2e8f9f7 34 // Note: Commented lines are alternative possibilities which are not used per default.
<> 144:ef7eb2e8f9f7 35 // If you change them, you will have also to modify the corresponding xxx_api.c file
<> 144:ef7eb2e8f9f7 36 // for pwmout, analogin, analogout, ...
<> 144:ef7eb2e8f9f7 37 // =====
<> 144:ef7eb2e8f9f7 38
<> 144:ef7eb2e8f9f7 39 //*** ADC ***
<> 144:ef7eb2e8f9f7 40
<> 144:ef7eb2e8f9f7 41 const PinMap PinMap_ADC[] = {
<> 144:ef7eb2e8f9f7 42 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
<> 144:ef7eb2e8f9f7 43 {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
<> 144:ef7eb2e8f9f7 44 {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
<> 144:ef7eb2e8f9f7 45 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
<> 144:ef7eb2e8f9f7 46 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
<> 144:ef7eb2e8f9f7 47 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
<> 144:ef7eb2e8f9f7 48 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
<> 144:ef7eb2e8f9f7 49 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
<> 144:ef7eb2e8f9f7 50 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
<> 144:ef7eb2e8f9f7 51
<> 144:ef7eb2e8f9f7 52 {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
<> 144:ef7eb2e8f9f7 53 {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
<> 144:ef7eb2e8f9f7 54 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 55 };
<> 144:ef7eb2e8f9f7 56
<> 144:ef7eb2e8f9f7 57 //*** I2C ***
<> 144:ef7eb2e8f9f7 58
<> 144:ef7eb2e8f9f7 59 const PinMap PinMap_I2C_SDA[] = {
<> 144:ef7eb2e8f9f7 60 {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
<> 144:ef7eb2e8f9f7 61 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 62 };
<> 144:ef7eb2e8f9f7 63
<> 144:ef7eb2e8f9f7 64 const PinMap PinMap_I2C_SCL[] = {
<> 144:ef7eb2e8f9f7 65 {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
<> 144:ef7eb2e8f9f7 66 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 67 };
<> 144:ef7eb2e8f9f7 68
<> 144:ef7eb2e8f9f7 69 //*** PWM ***
<> 144:ef7eb2e8f9f7 70
<> 144:ef7eb2e8f9f7 71 // TIM5 cannot be used because already used by the us_ticker
<> 148:21d94c44109e 72 // TIM3 cannot be used because already used by the Bluetooth UART
<> 148:21d94c44109e 73 // TIM1 is used by LPO emulation. If external LPO is connected this can be used for PWM.
<> 144:ef7eb2e8f9f7 74 const PinMap PinMap_PWM[] = {
<> 144:ef7eb2e8f9f7 75 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
<> 144:ef7eb2e8f9f7 76 {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
<> 144:ef7eb2e8f9f7 77 {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
<> 144:ef7eb2e8f9f7 78 {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
<> 144:ef7eb2e8f9f7 79 {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
<> 144:ef7eb2e8f9f7 80 {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
<> 144:ef7eb2e8f9f7 81 {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
<> 144:ef7eb2e8f9f7 82
<> 144:ef7eb2e8f9f7 83 {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
<> 144:ef7eb2e8f9f7 84 {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
<> 144:ef7eb2e8f9f7 85 {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
<> 144:ef7eb2e8f9f7 86 {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
<> 144:ef7eb2e8f9f7 87
<> 144:ef7eb2e8f9f7 88 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 89 };
<> 144:ef7eb2e8f9f7 90
<> 144:ef7eb2e8f9f7 91 //*** SERIAL ***
<> 144:ef7eb2e8f9f7 92
<> 144:ef7eb2e8f9f7 93 const PinMap PinMap_UART_TX[] = {
<> 144:ef7eb2e8f9f7 94 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
<> 144:ef7eb2e8f9f7 95 {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
<> 144:ef7eb2e8f9f7 96 {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
<> 144:ef7eb2e8f9f7 97 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 98 };
<> 144:ef7eb2e8f9f7 99
<> 144:ef7eb2e8f9f7 100 const PinMap PinMap_UART_RX[] = {
<> 144:ef7eb2e8f9f7 101 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
<> 144:ef7eb2e8f9f7 102 {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
<> 144:ef7eb2e8f9f7 103 {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
<> 144:ef7eb2e8f9f7 104 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 105 };
<> 144:ef7eb2e8f9f7 106
<> 144:ef7eb2e8f9f7 107 //*** SPI ***
<> 144:ef7eb2e8f9f7 108
<> 144:ef7eb2e8f9f7 109 const PinMap PinMap_SPI_MOSI[] = {
<> 144:ef7eb2e8f9f7 110 {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
<> 144:ef7eb2e8f9f7 111 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 112 };
<> 144:ef7eb2e8f9f7 113
<> 144:ef7eb2e8f9f7 114 const PinMap PinMap_SPI_MISO[] = {
<> 144:ef7eb2e8f9f7 115 {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
<> 144:ef7eb2e8f9f7 116 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 117 };
<> 144:ef7eb2e8f9f7 118
<> 144:ef7eb2e8f9f7 119 const PinMap PinMap_SPI_SCLK[] = {
<> 144:ef7eb2e8f9f7 120 {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
<> 144:ef7eb2e8f9f7 121 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 122 };
<> 144:ef7eb2e8f9f7 123
<> 144:ef7eb2e8f9f7 124 const PinMap PinMap_SPI_SSEL[] = {
<> 144:ef7eb2e8f9f7 125 {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
<> 144:ef7eb2e8f9f7 126 {NC, NC, 0}
<> 144:ef7eb2e8f9f7 127 };
<> 148:21d94c44109e 128
<> 148:21d94c44109e 129 const PinMap PinMap_CAN_RD[] = {
<> 148:21d94c44109e 130 {PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
<> 148:21d94c44109e 131 {PB_12, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
<> 148:21d94c44109e 132 {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
<> 148:21d94c44109e 133 {NC, NC, 0}
<> 148:21d94c44109e 134 };
<> 148:21d94c44109e 135
<> 148:21d94c44109e 136 const PinMap PinMap_CAN_TD[] = {
<> 148:21d94c44109e 137 {PB_13, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
<> 148:21d94c44109e 138 {PB_6 , CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
<> 148:21d94c44109e 139 {PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
<> 148:21d94c44109e 140 {NC, NC, 0}
<> 148:21d94c44109e 141 };