Amit Gandhi
/
nRF51822_KJL
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
nRF51822
by 
Nordic Semiconductor
Revision 583:3e44f6eb3a42, committed 2016-01-11
- Comitter:
- vcoubard
- Date:
- Mon Jan 11 10:19:27 2016 +0000
- Parent:
- 582:37fd3190598e
- Child:
- 584:c547c980452f
- Commit message:
- Synchronized with git rev eab13c8b
Author: Andres Amaya Garcia
Remove occurrence of deprecated appearance enum
Changed in this revision
| source/projectconfig.h | Show annotated file Show diff for this revision Revisions of this file |
--- a/source/projectconfig.h Mon Jan 11 10:19:27 2016 +0000 +++ b/source/projectconfig.h Mon Jan 11 10:19:27 2016 +0000 @@ -1,136 +1,137 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _PROJECTCONFIG_H_ -#define _PROJECTCONFIG_H_ - -#include "ble/blecommon.h" - -/*========================================================================= - MCU & BOARD SELCTION - - CFG_BOARD is one of the value defined in board.h - -----------------------------------------------------------------------*/ - #define CFG_BOARD BOARD_PCA10001 - #define CFG_MCU_STRING "nRF51822" -/*=========================================================================*/ - - -/*========================================================================= - CODE BASE VERSION SETTINGS - - Please do not modify this version number. To set a version number - for your project or firmware, change the values in your 'boards/' - config file. - -----------------------------------------------------------------------*/ - #define CFG_CODEBASE_VERSION_MAJOR 0 - #define CFG_CODEBASE_VERSION_MINOR 1 - #define CFG_CODEBASE_VERSION_REVISION 0 -/*=========================================================================*/ - - -/*========================================================================= - FIRMWARE VERSION SETTINGS - -----------------------------------------------------------------------*/ - #define CFG_FIRMWARE_VERSION_MAJOR 0 - #define CFG_FIRMWARE_VERSION_MINOR 0 - #define CFG_FIRMWARE_VERSION_REVISION 0 -/*=========================================================================*/ - - -/*========================================================================= - DEBUG LEVEL - ----------------------------------------------------------------------- - - CFG_DEBUG Level 3: Full debug output, any failed assert - will produce a breakpoint for the - debugger - Level 2: ATTR_ALWAYS_INLINE is null, ASSERT - has text - Level 1: ATTR_ALWAYS_INLINE is an attribute, - ASSERT has no text - Level 0: No debug information generated - - -----------------------------------------------------------------------*/ - #define CFG_DEBUG (1) - - #if (CFG_DEBUG > 3) || (CFG_DEBUG < 0) - #error "CFG_DEBUG must be a value between 0 (no debug) and 3" - #endif -/*=========================================================================*/ - - -/*========================================================================= - GENERAL NRF51 PERIPHERAL SETTINGS - ----------------------------------------------------------------------- - - CFG_SCHEDULER_ENABLE Set this to 'true' or 'false' depending on - if you use the event scheduler or not - - -----------------------------------------------------------------------*/ - #define CFG_SCHEDULER_ENABLE false - - /*------------------------------- GPIOTE ------------------------------*/ - #define CFG_GPIOTE_MAX_USERS 1 /**< Maximum number of users of the GPIOTE handler. */ - - /*-------------------------------- TIMER ------------------------------*/ - #define CFG_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. freq = (32768/(PRESCALER+1)) */ - #define CFG_TIMER_MAX_INSTANCE 1 /**< Maximum number of simultaneously created timers. */ - #define CFG_TIMER_OPERATION_QUEUE_SIZE 2 /**< Size of timer operation queues. */ -/*=========================================================================*/ - - -/*========================================================================= - BTLE SETTINGS - -----------------------------------------------------------------------*/ - - #define CFG_BLE_TX_POWER_LEVEL 0 /**< in dBm (Valid values are -40, -20, -16, -12, -8, -4, 0, 4) */ - - /*---------------------------- BOND MANAGER ---------------------------*/ - #define CFG_BLE_BOND_FLASH_PAGE_BOND (BLE_FLASH_PAGE_END-1) /**< Flash page used for bond manager bonding information.*/ - #define CFG_BLE_BOND_FLASH_PAGE_SYS_ATTR (BLE_FLASH_PAGE_END-3) /**< Flash page used for bond manager system attribute information. TODO check if we can use BLE_FLASH_PAGE_END-2*/ - #define CFG_BLE_BOND_DELETE_BUTTON_NUM 0 /**< Button to press to delete bond details during init */ - - /*------------------------------ SECURITY -----------------------------*/ - #define CFG_BLE_SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */ - #define CFG_BLE_SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */ - #define CFG_BLE_SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ - #define CFG_BLE_SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ - #define CFG_BLE_SEC_PARAM_MAX_KEY_SIZE 16 - - /*--------------------------------- GAP -------------------------------*/ - #define CFG_GAP_APPEARANCE BLE_APPEARANCE_GENERIC_TAG - #define CFG_GAP_LOCAL_NAME "nRF5x" - - #define CFG_GAP_CONNECTION_MIN_INTERVAL_MS 50 /**< Minimum acceptable connection interval */ - #define CFG_GAP_CONNECTION_MAX_INTERVAL_MS 500 /**< Maximum acceptable connection interval */ - #define CFG_GAP_CONNECTION_SUPERVISION_TIMEOUT_MS 4000 /**< Connection supervisory timeout */ - #define CFG_GAP_CONNECTION_SLAVE_LATENCY 0 /**< Slave Latency in number of connection events. */ - - #define CFG_GAP_ADV_INTERVAL_MS 25 /**< The advertising interval in miliseconds, should be multiply of 0.625 */ - #define CFG_GAP_ADV_TIMEOUT_S 180 /**< The advertising timeout in units of seconds. */ -/*=========================================================================*/ - - -/*========================================================================= - VALIDATION - -----------------------------------------------------------------------*/ - #if CFG_BLE_TX_POWER_LEVEL != -40 && CFG_BLE_TX_POWER_LEVEL != -20 && CFG_BLE_TX_POWER_LEVEL != -16 && CFG_BLE_TX_POWER_LEVEL != -12 && CFG_BLE_TX_POWER_LEVEL != -8 && CFG_BLE_TX_POWER_LEVEL != -4 && CFG_BLE_TX_POWER_LEVEL != 0 && CFG_BLE_TX_POWER_LEVEL != 4 - #error "CFG_BLE_TX_POWER_LEVEL must be -40, -20, -16, -12, -8, -4, 0 or 4" - #endif -/*=========================================================================*/ - +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _PROJECTCONFIG_H_ +#define _PROJECTCONFIG_H_ + +#include "ble/blecommon.h" +#include "ble/GapAdvertisingData.h" + +/*========================================================================= + MCU & BOARD SELCTION + + CFG_BOARD is one of the value defined in board.h + -----------------------------------------------------------------------*/ + #define CFG_BOARD BOARD_PCA10001 + #define CFG_MCU_STRING "nRF51822" +/*=========================================================================*/ + + +/*========================================================================= + CODE BASE VERSION SETTINGS + + Please do not modify this version number. To set a version number + for your project or firmware, change the values in your 'boards/' + config file. + -----------------------------------------------------------------------*/ + #define CFG_CODEBASE_VERSION_MAJOR 0 + #define CFG_CODEBASE_VERSION_MINOR 1 + #define CFG_CODEBASE_VERSION_REVISION 0 +/*=========================================================================*/ + + +/*========================================================================= + FIRMWARE VERSION SETTINGS + -----------------------------------------------------------------------*/ + #define CFG_FIRMWARE_VERSION_MAJOR 0 + #define CFG_FIRMWARE_VERSION_MINOR 0 + #define CFG_FIRMWARE_VERSION_REVISION 0 +/*=========================================================================*/ + + +/*========================================================================= + DEBUG LEVEL + ----------------------------------------------------------------------- + + CFG_DEBUG Level 3: Full debug output, any failed assert + will produce a breakpoint for the + debugger + Level 2: ATTR_ALWAYS_INLINE is null, ASSERT + has text + Level 1: ATTR_ALWAYS_INLINE is an attribute, + ASSERT has no text + Level 0: No debug information generated + + -----------------------------------------------------------------------*/ + #define CFG_DEBUG (1) + + #if (CFG_DEBUG > 3) || (CFG_DEBUG < 0) + #error "CFG_DEBUG must be a value between 0 (no debug) and 3" + #endif +/*=========================================================================*/ + + +/*========================================================================= + GENERAL NRF51 PERIPHERAL SETTINGS + ----------------------------------------------------------------------- + + CFG_SCHEDULER_ENABLE Set this to 'true' or 'false' depending on + if you use the event scheduler or not + + -----------------------------------------------------------------------*/ + #define CFG_SCHEDULER_ENABLE false + + /*------------------------------- GPIOTE ------------------------------*/ + #define CFG_GPIOTE_MAX_USERS 1 /**< Maximum number of users of the GPIOTE handler. */ + + /*-------------------------------- TIMER ------------------------------*/ + #define CFG_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. freq = (32768/(PRESCALER+1)) */ + #define CFG_TIMER_MAX_INSTANCE 1 /**< Maximum number of simultaneously created timers. */ + #define CFG_TIMER_OPERATION_QUEUE_SIZE 2 /**< Size of timer operation queues. */ +/*=========================================================================*/ + + +/*========================================================================= + BTLE SETTINGS + -----------------------------------------------------------------------*/ + + #define CFG_BLE_TX_POWER_LEVEL 0 /**< in dBm (Valid values are -40, -20, -16, -12, -8, -4, 0, 4) */ + + /*---------------------------- BOND MANAGER ---------------------------*/ + #define CFG_BLE_BOND_FLASH_PAGE_BOND (BLE_FLASH_PAGE_END-1) /**< Flash page used for bond manager bonding information.*/ + #define CFG_BLE_BOND_FLASH_PAGE_SYS_ATTR (BLE_FLASH_PAGE_END-3) /**< Flash page used for bond manager system attribute information. TODO check if we can use BLE_FLASH_PAGE_END-2*/ + #define CFG_BLE_BOND_DELETE_BUTTON_NUM 0 /**< Button to press to delete bond details during init */ + + /*------------------------------ SECURITY -----------------------------*/ + #define CFG_BLE_SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */ + #define CFG_BLE_SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */ + #define CFG_BLE_SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ + #define CFG_BLE_SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ + #define CFG_BLE_SEC_PARAM_MAX_KEY_SIZE 16 + + /*--------------------------------- GAP -------------------------------*/ + #define CFG_GAP_APPEARANCE GapAdvertisingData::GENERIC_TAG + #define CFG_GAP_LOCAL_NAME "nRF5x" + + #define CFG_GAP_CONNECTION_MIN_INTERVAL_MS 50 /**< Minimum acceptable connection interval */ + #define CFG_GAP_CONNECTION_MAX_INTERVAL_MS 500 /**< Maximum acceptable connection interval */ + #define CFG_GAP_CONNECTION_SUPERVISION_TIMEOUT_MS 4000 /**< Connection supervisory timeout */ + #define CFG_GAP_CONNECTION_SLAVE_LATENCY 0 /**< Slave Latency in number of connection events. */ + + #define CFG_GAP_ADV_INTERVAL_MS 25 /**< The advertising interval in miliseconds, should be multiply of 0.625 */ + #define CFG_GAP_ADV_TIMEOUT_S 180 /**< The advertising timeout in units of seconds. */ +/*=========================================================================*/ + + +/*========================================================================= + VALIDATION + -----------------------------------------------------------------------*/ + #if CFG_BLE_TX_POWER_LEVEL != -40 && CFG_BLE_TX_POWER_LEVEL != -20 && CFG_BLE_TX_POWER_LEVEL != -16 && CFG_BLE_TX_POWER_LEVEL != -12 && CFG_BLE_TX_POWER_LEVEL != -8 && CFG_BLE_TX_POWER_LEVEL != -4 && CFG_BLE_TX_POWER_LEVEL != 0 && CFG_BLE_TX_POWER_LEVEL != 4 + #error "CFG_BLE_TX_POWER_LEVEL must be -40, -20, -16, -12, -8, -4, 0 or 4" + #endif +/*=========================================================================*/ + #endif /* _PROJECTCONFIG_H_ */ \ No newline at end of file