test
Fork of mbed-dev by
targets/TARGET_ONSEMI/TARGET_NCS36510/architecture.h
- Committer:
- AnnaBridge
- Date:
- 2017-11-08
- Revision:
- 178:d650f5d4c87a
- Parent:
- 149:156823d33999
File content as of revision 178:d650f5d4c87a:
/** ****************************************************************************** * @file architecture.h * @brief CM3 architecture specific inclusions and defines. * @internal * @author ON Semiconductor * $Rev: $ * $Date: $ ****************************************************************************** * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor). * All rights reserved. This software and/or documentation is licensed by ON Semiconductor * under limited terms and conditions. The terms and conditions pertaining to the software * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and * if applicable the software license agreement. Do not use this software and/or * documentation unless you have carefully read and you agree to the limited terms and * conditions. By using this software and/or documentation, you agree to the limited * terms and conditions. * * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * @endinternal * * @ingroup bsp */ #ifndef ARCHITECTURE_H_ #define ARCHITECTURE_H_ /************************************************************************************************* * * * Header files * * * *************************************************************************************************/ //#include <ncs36510.h> //#include <system_ncs36510.h> //#include <core_cm3.h> #include "NCS36510.h" #include "system_NCS36510.h" #include "core_cm3.h" #include "cmsis.h" /************************************************************************************************* * * * Symbolic Constants * * * *************************************************************************************************/ /* Interrupt Control and State Register (0xE000ED04) * 31 NMIPENDSET R/W 0 NMI pended * 28 PENDSVSET R/W 0 Write 1 to pend system call; Read value * indicates pending status * 27 PENDSVCLR W 0 Write 1 to clear PendSV pending status * 26 PENDSTSET R/W 0 Write 1 to pend Systick exception; Read * value indicates pending status * 25 PENDSTCLR W 0 Write 1 to clear Systick pending status * 23 ISRPREEMPT R 0 Indicate that a pending interrupt is going * to be active in next step (for debug) * 22 ISRPENDING R 0 External interrupt pending (excluding * system exceptions such as NMI for * fault) * 21:12 VECTPENDING R 0 Pending ISR number * 11 RETTOBASE R 0 Set to 1 when the processor is running * an exception handler and will return to * thread level if interrupt return and no * other exceptions pending * 9:0 VECTACTIVE R 0 Current running interrupt service routine */ #define RUNNING_IN_ISR (((SCB->ICSR & 0x3FF) > 0 ) ? 1 : 0) #endif /* ARCHITECTURE_H_ */