test
Fork of mbed-dev by
Diff: targets/TARGET_Maxim/TARGET_MAX32630/serial_api.c
- Revision:
- 157:ff67d9f36b67
- Child:
- 166:e614a9f1c9e2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_Maxim/TARGET_MAX32630/serial_api.c Thu Feb 02 17:01:33 2017 +0000 @@ -0,0 +1,381 @@ +/******************************************************************************* + * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES + * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of Maxim Integrated + * Products, Inc. shall not be used except as stated in the Maxim Integrated + * Products, Inc. Branding Policy. + * + * The mere transfer of this software does not imply any licenses + * of trade secrets, proprietary technology, copyrights, patents, + * trademarks, maskwork rights, or any other form of intellectual + * property whatsoever. Maxim Integrated Products, Inc. retains all + * ownership rights. + ******************************************************************************* + */ + +#include <string.h> +#include "mbed_assert.h" +#include "cmsis.h" +#include "serial_api.h" +#include "gpio_api.h" +#include "uart.h" +#include "uart_regs.h" +#include "ioman_regs.h" +#include "PeripheralPins.h" + +#define DEFAULT_BAUD 9600 + +#define UART_ERRORS (MXC_F_UART_INTFL_RX_FRAMING_ERR | \ + MXC_F_UART_INTFL_RX_PARITY_ERR | \ + MXC_F_UART_INTFL_RX_FIFO_OVERFLOW) + +// Variables for managing the stdio UART +int stdio_uart_inited = 0; +serial_t stdio_uart = {0}; + +// Variables for interrupt driven +static uart_irq_handler irq_handler; +static serial_t *objs[MXC_CFG_UART_INSTANCES]; + +static void usurp_pin(PinName, int); + +//****************************************************************************** +void serial_init(serial_t *obj, PinName tx, PinName rx) +{ + // Determine which uart is associated with each pin + UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX); + UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX); + UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx); + + // Make sure that both pins are pointing to the same uart + MBED_ASSERT(uart != (UARTName)NC); + + // Set the obj pointer to the proper uart + obj->uart = (mxc_uart_regs_t*)uart; + + // Set the uart index + obj->index = MXC_UART_GET_IDX(obj->uart); + obj->fifo = (mxc_uart_fifo_regs_t*)MXC_UART_GET_BASE_FIFO(obj->index); + + // Record the pins requested + obj->tx = tx; + obj->rx = rx; + + // Merge pin function requests for use with CMSIS init func + ioman_req_t io_req = {0}; + pin_function_t *pin_func = NULL; + if (tx != NC) { + pin_func = (pin_function_t *)pinmap_find_function(tx, PinMap_UART_TX); + io_req.value = pin_func->req_val; + } + if (rx != NC) { + pin_func = (pin_function_t *)pinmap_find_function(rx, PinMap_UART_RX); + io_req.value |= pin_func->req_val; + } + + // Using req and ack pointers of last pin function lookup + obj->sys_cfg.io_cfg.req_reg = pin_func->reg_req; + obj->sys_cfg.io_cfg.ack_reg = pin_func->reg_ack; + obj->sys_cfg.io_cfg.req_val = io_req; + obj->sys_cfg.clk_scale = CLKMAN_SCALE_DIV_8; + + // Configure the UART with default parameters + obj->cfg.extra_stop = 0; + obj->cfg.cts = 0; + obj->cfg.rts = 0; + obj->cfg.baud = DEFAULT_BAUD; + obj->cfg.size = UART_DATA_SIZE_8_BITS; + obj->cfg.parity = UART_PARITY_DISABLE; + + // Manage stdio UART + if (uart == STDIO_UART) { + stdio_uart_inited = 1; + stdio_uart = *obj; + } + + int retval = UART_Init(obj->uart, &obj->cfg, &obj->sys_cfg); + MBED_ASSERT(retval == E_NO_ERROR); +} + +//****************************************************************************** +void serial_baud(serial_t *obj, int baudrate) +{ + obj->cfg.baud = baudrate; + int retval = UART_Init(obj->uart, &obj->cfg, &obj->sys_cfg); + MBED_ASSERT(retval == E_NO_ERROR); +} + +//****************************************************************************** +void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) +{ + switch (data_bits) { + case 5: + obj->cfg.size = UART_DATA_SIZE_5_BITS; + break; + case 6: + obj->cfg.size = UART_DATA_SIZE_6_BITS; + break; + case 7: + obj->cfg.size = UART_DATA_SIZE_7_BITS; + break; + case 8: + obj->cfg.size = UART_DATA_SIZE_8_BITS; + break; + default: + MBED_ASSERT(0); + break; + } + + switch (parity) { + case ParityNone: + obj->cfg.parity = UART_PARITY_DISABLE; + break; + case ParityOdd : + obj->cfg.parity = UART_PARITY_ODD; + break; + case ParityEven: + obj->cfg.parity = UART_PARITY_EVEN; + break; + case ParityForced1: + case ParityForced0: + default: + MBED_ASSERT(0); + break; + } + + switch (stop_bits) { + case 1: + obj->cfg.extra_stop = 0; + break; + case 2: + obj->cfg.extra_stop = 1; + break; + default: + MBED_ASSERT(0); + break; + } + + int retval = UART_Init(obj->uart, &obj->cfg, NULL); + MBED_ASSERT(retval == E_NO_ERROR); +} + +//****************************************************************************** +void uart_handler(serial_t *obj) +{ + if (obj && obj->id) { + irq_handler(obj->id, RxIrq); + } +} + +void uart0_handler(void) { uart_handler(objs[0]); } +void uart1_handler(void) { uart_handler(objs[1]); } +void uart2_handler(void) { uart_handler(objs[2]); } +void uart3_handler(void) { uart_handler(objs[3]); } + +//****************************************************************************** +void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) +{ + irq_handler = handler; + obj->id = id; +} + +//****************************************************************************** +void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) +{ + switch (obj->index) { + case 0: + NVIC_SetVector(UART0_IRQn, uart0_handler); + NVIC_EnableIRQ(UART0_IRQn); + break; + case 1: + NVIC_SetVector(UART1_IRQn, uart1_handler); + NVIC_EnableIRQ(UART1_IRQn); + break; + case 2: + NVIC_SetVector(UART2_IRQn, uart2_handler); + NVIC_EnableIRQ(UART2_IRQn); + break; + case 3: + NVIC_SetVector(UART3_IRQn, uart3_handler); + NVIC_EnableIRQ(UART3_IRQn); + break; + default: + MBED_ASSERT(0); + } + + if (irq == RxIrq) { + // Enable RX FIFO Threshold Interrupt + if (enable) { + // Clear pending interrupts + obj->uart->intfl = obj->uart->intfl; + obj->uart->inten |= (MXC_F_UART_INTFL_RX_FIFO_NOT_EMPTY | UART_ERRORS); + } else { + // Clear pending interrupts + obj->uart->intfl = obj->uart->intfl; + obj->uart->inten &= ~(MXC_F_UART_INTFL_RX_FIFO_NOT_EMPTY | UART_ERRORS); + } + } else if (irq == TxIrq) { + // Set TX Almost Empty level to interrupt when empty + MXC_SET_FIELD(&obj->uart->tx_fifo_ctrl, MXC_F_UART_RX_FIFO_CTRL_FIFO_AF_LVL, + (MXC_UART_FIFO_DEPTH - 1) << MXC_F_UART_TX_FIFO_CTRL_FIFO_AE_LVL_POS); + + // Enable TX Almost Empty Interrupt + if (enable) { + // Clear pending interrupts + obj->uart->intfl = obj->uart->intfl; + obj->uart->inten |= MXC_F_UART_INTFL_TX_FIFO_AE; + } else { + // Clear pending interrupts + obj->uart->intfl = obj->uart->intfl; + obj->uart->inten &= ~MXC_F_UART_INTFL_TX_FIFO_AE; + } + } else { + MBED_ASSERT(0); + } +} + +//****************************************************************************** +int serial_getc(serial_t *obj) +{ + int c = -1; + + if (obj->rx != NC) { + // Wait for data to be available + while ((obj->uart->rx_fifo_ctrl & MXC_F_UART_RX_FIFO_CTRL_FIFO_ENTRY) == 0); + + c = obj->fifo->rx; + } + + return c; +} + +//****************************************************************************** +void serial_putc(serial_t *obj, int c) +{ + if (obj->tx != NC) { + // Wait for room in the FIFO without blocking interrupts. + while (UART_NumWriteAvail(obj->uart) == 0); + + // Must clear before every write to the buffer to know that the FIFO + // is empty when the TX DONE bit is set + obj->uart->intfl = MXC_F_UART_INTFL_TX_DONE; + obj->fifo->tx = (uint8_t)c; + } +} + +//****************************************************************************** +int serial_readable(serial_t *obj) +{ + return UART_NumReadAvail(obj->uart); +} + +//****************************************************************************** +int serial_writable(serial_t *obj) +{ + return UART_NumWriteAvail(obj->uart); +} + +//****************************************************************************** +void serial_clear(serial_t *obj) +{ + // Clear the RX and TX FIFOs + UART_DrainRX(obj->uart); + UART_DrainTX(obj->uart); +} + +//****************************************************************************** +void serial_break_set(serial_t *obj) +{ + // Make sure that nothing is being sent + while (((obj->uart->tx_fifo_ctrl & MXC_F_UART_TX_FIFO_CTRL_FIFO_ENTRY) + >> MXC_F_UART_TX_FIFO_CTRL_FIFO_ENTRY_POS) > 0); + while (!(obj->uart->intfl & MXC_F_UART_INTFL_TX_DONE)); + + // Configure TX to output 0 + usurp_pin(obj->tx, 0); + + // GPIO is setup now, but we need to unmap UART from the pin + pin_function_t *pin_func = (pin_function_t *)pinmap_find_function(obj->tx, PinMap_UART_TX); + *pin_func->reg_req &= ~MXC_F_IOMAN_UART_REQ_IO_REQ; + MBED_ASSERT((*pin_func->reg_ack & MXC_F_IOMAN_UART_ACK_IO_ACK) == 0); +} + +//****************************************************************************** +void serial_break_clear(serial_t *obj) +{ + // Configure TX to output 1 + usurp_pin(obj->tx, 1); + // Return TX to UART control + serial_pinout_tx(obj->tx); +} + +//****************************************************************************** +void serial_pinout_tx(PinName tx) +{ + pinmap_pinout(tx, PinMap_UART_TX); +} + +//****************************************************************************** +void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow) +{ + pin_function_t rtscts_pin_func = {0}; + + obj->cfg.cts = 0; + obj->cfg.rts = 0; + + if ((FlowControlCTS == type) || (FlowControlRTSCTS == type)) { + UARTName uart_cts = (UARTName)pinmap_peripheral(txflow, PinMap_UART_CTS); + UARTName uart = (UARTName)pinmap_merge(uart_cts, (UARTName)obj->uart); + // Assert pin is usable with existing uart + MBED_ASSERT(uart != (UARTName)NC); + + pin_function_t *pin_func; + pin_func = (pin_function_t *)pinmap_find_function(txflow, PinMap_UART_CTS); + rtscts_pin_func.req_val |= pin_func->req_val; + + obj->cfg.cts = 1; + } + + if ((FlowControlRTS == type) || (FlowControlRTSCTS == type)) { + UARTName uart_rts = (UARTName)pinmap_peripheral(rxflow, PinMap_UART_RTS); + UARTName uart = (UARTName)pinmap_merge(uart_rts, (UARTName)obj->uart); + MBED_ASSERT(uart != (UARTName)NC); + + pin_function_t *pin_func; + pin_func = (pin_function_t *)pinmap_find_function(rxflow, PinMap_UART_RTS); + rtscts_pin_func.req_val |= pin_func->req_val; + + obj->cfg.rts = 1; + } + + obj->sys_cfg.io_cfg.req_val.value |= rtscts_pin_func.req_val; + + int retval = UART_Init(obj->uart, &obj->cfg, &obj->sys_cfg); + MBED_ASSERT(retval == E_NO_ERROR); +} + +//****************************************************************************** +static void usurp_pin(PinName pin, int state) +{ + gpio_t gpio; + gpio_init_out(&gpio, pin); + gpio_write(&gpio, state); +}