Diff: platform/mbed_sleep.h

Revision:

160:d5399cc887bb

Child:

168:e84263d55307

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/platform/mbed_sleep.h	Tue Mar 14 16:40:56 2017 +0000
@@ -0,0 +1,85 @@
+
+/** \addtogroup platform */
+/** @{*/
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SLEEP_H
+#define MBED_SLEEP_H
+
+#include "sleep_api.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Send the microcontroller to sleep
+ *
+ * @note This function can be a noop if not implemented by the platform.
+ * @note This function will only put device to sleep in release mode (small profile or when NDEBUG is defined).
+ *
+ * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
+ * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates
+ * dynamic power used by the processor, memory systems and buses. The processor, peripheral and
+ * memory state are maintained, and the peripherals continue to work and can generate interrupts.
+ *
+ * The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
+ *
+ * @note
+ *  The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+__INLINE static void sleep(void)
+{
+#ifdef NDEBUG
+#if DEVICE_SLEEP
+    hal_sleep();
+#endif /* DEVICE_SLEEP */
+#endif /* NDEBUG */
+}
+
+/** Send the microcontroller to deep sleep
+ *
+ * @note This function can be a noop if not implemented by the platform.
+ * @note This function will only put device to sleep in release mode (small profile or when NDEBUG is defined).
+ *
+ * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode
+ * has the same sleep features as sleep plus it powers down peripherals and clocks. All state
+ * is still maintained.
+ *
+ * The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
+ *
+ * @note
+ *  The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+__INLINE static void deepsleep(void)
+{
+#ifdef NDEBUG
+#if DEVICE_SLEEP
+    hal_deepsleep();
+#endif /* DEVICE_SLEEP */
+#endif /* NDEBUG */
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/** @}*/