Amit Gandhi
test
Fork of
mbed-dev
by 
mbed official
Diff: targets/TARGET_Maxim/TARGET_MAX32625/serial_api.c
- Revision:
- 150:02e0a0aed4ec
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32625/serial_api.c Tue Nov 08 17:45:16 2016 +0000
@@ -0,0 +1,376 @@
+/*******************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#include <string.h>
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "serial_api.h"
+#include "gpio_api.h"
+#include "uart.h"
+#include "uart_regs.h"
+#include "ioman_regs.h"
+#include "PeripheralPins.h"
+
+#define DEFAULT_BAUD 9600
+
+#define UART_ERRORS (MXC_F_UART_INTFL_RX_FRAMING_ERR | \
+ MXC_F_UART_INTFL_RX_PARITY_ERR | \
+ MXC_F_UART_INTFL_RX_FIFO_OVERFLOW)
+
+// Variables for managing the stdio UART
+int stdio_uart_inited;
+serial_t stdio_uart;
+
+// Variables for interrupt driven
+static uart_irq_handler irq_handler;
+static serial_t *objs[MXC_CFG_UART_INSTANCES];
+
+static void usurp_pin(PinName, int);
+
+//******************************************************************************
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+ // Determine which uart is associated with each pin
+ UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+ UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+ UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+
+ // Make sure that both pins are pointing to the same uart
+ MBED_ASSERT(uart != (UARTName)NC);
+
+ // Set the obj pointer to the proper uart
+ obj->uart = (mxc_uart_regs_t*)uart;
+
+ // Set the uart index
+ obj->index = MXC_UART_GET_IDX(obj->uart);
+ obj->fifo = (mxc_uart_fifo_regs_t*)MXC_UART_GET_BASE_FIFO(obj->index);
+
+ // Manage stdio UART
+ if (uart == STDIO_UART) {
+ stdio_uart_inited = 1;
+ memcpy(&stdio_uart, obj, sizeof(serial_t));
+ }
+
+ // Record the pins requested
+ obj->tx = tx;
+ obj->rx = rx;
+
+ // Merge pin function requests for use with CMSIS init func
+ ioman_req_t io_req = {0};
+ pin_function_t *pin_func = NULL;
+ if (tx != NC) {
+ pin_func = (pin_function_t *)pinmap_find_function(tx, PinMap_UART_TX);
+ io_req.value = pin_func->req_val;
+ }
+ if (rx != NC) {
+ pin_func = (pin_function_t *)pinmap_find_function(rx, PinMap_UART_RX);
+ io_req.value |= pin_func->req_val;
+ }
+
+ // Using req and ack pointers of last pin function lookup
+ obj->sys_cfg.io_cfg.req_reg = pin_func->reg_req;
+ obj->sys_cfg.io_cfg.ack_reg = pin_func->reg_ack;
+ obj->sys_cfg.io_cfg.req_val = io_req;
+ obj->sys_cfg.clk_scale = CLKMAN_SCALE_DIV_8;
+
+ // Configure the UART with default parameters
+ obj->cfg.extra_stop = 0;
+ obj->cfg.cts = 0;
+ obj->cfg.rts = 0;
+ obj->cfg.baud = DEFAULT_BAUD;
+ obj->cfg.size = UART_DATA_SIZE_8_BITS;
+ obj->cfg.parity = UART_PARITY_DISABLE;
+
+ int retval = UART_Init(obj->uart, &obj->cfg, &obj->sys_cfg);
+ MBED_ASSERT(retval == E_NO_ERROR);
+}
+
+//******************************************************************************
+void serial_baud(serial_t *obj, int baudrate)
+{
+ obj->cfg.baud = baudrate;
+ int retval = UART_Init(obj->uart, &obj->cfg, NULL);
+ MBED_ASSERT(retval == E_NO_ERROR);
+}
+
+//******************************************************************************
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+ switch (data_bits) {
+ case 5:
+ obj->cfg.size = UART_DATA_SIZE_5_BITS;
+ break;
+ case 6:
+ obj->cfg.size = UART_DATA_SIZE_6_BITS;
+ break;
+ case 7:
+ obj->cfg.size = UART_DATA_SIZE_7_BITS;
+ break;
+ case 8:
+ obj->cfg.size = UART_DATA_SIZE_8_BITS;
+ break;
+ default:
+ MBED_ASSERT(0);
+ break;
+ }
+
+ switch (parity) {
+ case ParityNone:
+ obj->cfg.parity = UART_PARITY_DISABLE;
+ break;
+ case ParityOdd :
+ obj->cfg.parity = UART_PARITY_ODD;
+ break;
+ case ParityEven:
+ obj->cfg.parity = UART_PARITY_EVEN;
+ break;
+ case ParityForced1:
+ case ParityForced0:
+ default:
+ MBED_ASSERT(0);
+ break;
+ }
+
+ switch (stop_bits) {
+ case 1:
+ obj->cfg.extra_stop = 0;
+ break;
+ case 2:
+ obj->cfg.extra_stop = 1;
+ break;
+ default:
+ MBED_ASSERT(0);
+ break;
+ }
+
+ int retval = UART_Init(obj->uart, &obj->cfg, NULL);
+ MBED_ASSERT(retval == E_NO_ERROR);
+}
+
+//******************************************************************************
+void uart_handler(serial_t *obj)
+{
+ if (obj && obj->id) {
+ irq_handler(obj->id, RxIrq);
+ }
+}
+
+void uart0_handler(void) { uart_handler(objs[0]); }
+void uart1_handler(void) { uart_handler(objs[1]); }
+void uart2_handler(void) { uart_handler(objs[2]); }
+
+//******************************************************************************
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+ irq_handler = handler;
+ obj->id = id;
+}
+
+//******************************************************************************
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+ switch (obj->index) {
+ case 0:
+ NVIC_SetVector(UART0_IRQn, (uint32_t)uart0_handler);
+ NVIC_EnableIRQ(UART0_IRQn);
+ break;
+ case 1:
+ NVIC_SetVector(UART1_IRQn, (uint32_t)uart1_handler);
+ NVIC_EnableIRQ(UART1_IRQn);
+ break;
+ case 2:
+ NVIC_SetVector(UART2_IRQn, (uint32_t)uart2_handler);
+ NVIC_EnableIRQ(UART2_IRQn);
+ break;
+ default:
+ MBED_ASSERT(0);
+ }
+
+ if (irq == RxIrq) {
+ // Enable RX FIFO Threshold Interrupt
+ if (enable) {
+ // Clear pending interrupts
+ obj->uart->intfl = obj->uart->intfl;
+ obj->uart->inten |= (MXC_F_UART_INTFL_RX_FIFO_NOT_EMPTY | UART_ERRORS);
+ } else {
+ // Clear pending interrupts
+ obj->uart->intfl = obj->uart->intfl;
+ obj->uart->inten &= ~(MXC_F_UART_INTFL_RX_FIFO_NOT_EMPTY | UART_ERRORS);
+ }
+ } else if (irq == TxIrq) {
+ // Set TX Almost Empty level to interrupt when empty
+ MXC_SET_FIELD(&obj->uart->tx_fifo_ctrl, MXC_F_UART_RX_FIFO_CTRL_FIFO_AF_LVL,
+ (MXC_UART_FIFO_DEPTH - 1) << MXC_F_UART_TX_FIFO_CTRL_FIFO_AE_LVL_POS);
+
+ // Enable TX Almost Empty Interrupt
+ if (enable) {
+ // Clear pending interrupts
+ obj->uart->intfl = obj->uart->intfl;
+ obj->uart->inten |= MXC_F_UART_INTFL_TX_FIFO_AE;
+ } else {
+ // Clear pending interrupts
+ obj->uart->intfl = obj->uart->intfl;
+ obj->uart->inten &= ~MXC_F_UART_INTFL_TX_FIFO_AE;
+ }
+ } else {
+ MBED_ASSERT(0);
+ }
+}
+
+//******************************************************************************
+int serial_getc(serial_t *obj)
+{
+ int c = 0;
+
+ if (obj->rx != NC) {
+ // Wait for data to be available
+ while ((obj->uart->rx_fifo_ctrl & MXC_F_UART_RX_FIFO_CTRL_FIFO_ENTRY) == 0);
+
+ c = obj->fifo->rx;
+ }
+
+ return c;
+}
+
+//******************************************************************************
+void serial_putc(serial_t *obj, int c)
+{
+ if (obj->tx != NC) {
+ // Wait for room in the FIFO without blocking interrupts.
+ while (UART_NumWriteAvail(obj->uart) == 0);
+
+ // Must clear before every write to the buffer to know that the FIFO
+ // is empty when the TX DONE bit is set
+ obj->uart->intfl = MXC_F_UART_INTFL_TX_DONE;
+ obj->fifo->tx = (uint8_t)c;
+ }
+}
+
+//******************************************************************************
+int serial_readable(serial_t *obj)
+{
+ return UART_NumReadAvail(obj->uart);
+}
+
+//******************************************************************************
+int serial_writable(serial_t *obj)
+{
+ return UART_NumWriteAvail(obj->uart);
+}
+
+//******************************************************************************
+void serial_clear(serial_t *obj)
+{
+ // Clear the RX and TX FIFOs
+ UART_DrainRX(obj->uart);
+ UART_DrainTX(obj->uart);
+}
+
+//******************************************************************************
+void serial_break_set(serial_t *obj)
+{
+ // Make sure that nothing is being sent
+ while (((obj->uart->tx_fifo_ctrl & MXC_F_UART_TX_FIFO_CTRL_FIFO_ENTRY)
+ >> MXC_F_UART_TX_FIFO_CTRL_FIFO_ENTRY_POS) > 0);
+ while (!(obj->uart->intfl & MXC_F_UART_INTFL_TX_DONE));
+
+ // Configure TX to output 0
+ usurp_pin(obj->tx, 0);
+
+ // GPIO is setup now, but we need to unmap UART from the pin
+ pin_function_t *pin_func = (pin_function_t *)pinmap_find_function(obj->tx, PinMap_UART_TX);
+ *pin_func->reg_req &= ~MXC_F_IOMAN_UART_REQ_IO_REQ;
+ MBED_ASSERT((*pin_func->reg_ack & MXC_F_IOMAN_UART_ACK_IO_ACK) == 0);
+}
+
+//******************************************************************************
+void serial_break_clear(serial_t *obj)
+{
+ // Configure TX to output 1
+ usurp_pin(obj->tx, 1);
+ // Return TX to UART control
+ serial_pinout_tx(obj->tx);
+}
+
+//******************************************************************************
+void serial_pinout_tx(PinName tx)
+{
+ pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+//******************************************************************************
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow)
+{
+ pin_function_t rtscts_pin_func = {0};
+
+ obj->cfg.cts = 0;
+ obj->cfg.rts = 0;
+
+ if ((FlowControlCTS == type) || (FlowControlRTSCTS == type)) {
+ UARTName uart_cts = (UARTName)pinmap_peripheral(txflow, PinMap_UART_CTS);
+ UARTName uart = (UARTName)pinmap_merge(uart_cts, (UARTName)obj->uart);
+ // Assert pin is usable with existing uart
+ MBED_ASSERT(uart != (UARTName)NC);
+
+ pin_function_t *pin_func;
+ pin_func = (pin_function_t *)pinmap_find_function(txflow, PinMap_UART_CTS);
+ rtscts_pin_func.req_val |= pin_func->req_val;
+
+ obj->cfg.cts = 1;
+ }
+
+ if ((FlowControlRTS == type) || (FlowControlRTSCTS == type)) {
+ UARTName uart_rts = (UARTName)pinmap_peripheral(rxflow, PinMap_UART_RTS);
+ UARTName uart = (UARTName)pinmap_merge(uart_rts, (UARTName)obj->uart);
+ MBED_ASSERT(uart != (UARTName)NC);
+
+ pin_function_t *pin_func;
+ pin_func = (pin_function_t *)pinmap_find_function(rxflow, PinMap_UART_RTS);
+ rtscts_pin_func.req_val |= pin_func->req_val;
+
+ obj->cfg.rts = 1;
+ }
+
+ obj->sys_cfg.io_cfg.req_val.value |= rtscts_pin_func.req_val;
+
+ int retval = UART_Init(obj->uart, &obj->cfg, &obj->sys_cfg);
+ MBED_ASSERT(retval == E_NO_ERROR);
+}
+
+//******************************************************************************
+static void usurp_pin(PinName pin, int state)
+{
+ gpio_t gpio;
+ gpio_init_out(&gpio, pin);
+ gpio_write(&gpio, state);
+}