Amit Gandhi / mbed-dev

test

Fork of mbed-dev by mbed official

targets/TARGET_STM/hal_tick_16b.c@174:e131a1973e81, 2017-09-15 (annotated)

Committer:
AnnaBridge
Date:
Fri Sep 15 14:59:18 2017 +0100
Revision:
174:e131a1973e81
Parent:
168:e84263d55307
Child:
175:b96e65c34a4d
This updates the lib to the mbed lib v 151

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 153:fa9ff456f731 1 /* mbed Microcontroller Library
<> 153:fa9ff456f731 2 * Copyright (c) 2006-2016 ARM Limited
<> 153:fa9ff456f731 3 *
<> 153:fa9ff456f731 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 153:fa9ff456f731 5 * you may not use this file except in compliance with the License.
<> 153:fa9ff456f731 6 * You may obtain a copy of the License at
<> 153:fa9ff456f731 7 *
<> 153:fa9ff456f731 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 153:fa9ff456f731 9 *
<> 153:fa9ff456f731 10 * Unless required by applicable law or agreed to in writing, software
<> 153:fa9ff456f731 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 153:fa9ff456f731 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 153:fa9ff456f731 13 * See the License for the specific language governing permissions and
<> 153:fa9ff456f731 14 * limitations under the License.
<> 153:fa9ff456f731 15 */
<> 153:fa9ff456f731 16 #include "hal_tick.h"
<> 153:fa9ff456f731 17
<> 153:fa9ff456f731 18 // A 16-bit timer is used
<> 153:fa9ff456f731 19 #if TIM_MST_16BIT
<> 153:fa9ff456f731 20
<> 153:fa9ff456f731 21 #define DEBUG_TICK 0 // Set to 1 to toggle a pin (see below which pin) at each tick
<> 153:fa9ff456f731 22
<> 153:fa9ff456f731 23 extern TIM_HandleTypeDef TimMasterHandle;
<> 153:fa9ff456f731 24
<> 153:fa9ff456f731 25 extern volatile uint32_t SlaveCounter;
<> 153:fa9ff456f731 26 extern volatile uint32_t oc_int_part;
<> 153:fa9ff456f731 27
<> 153:fa9ff456f731 28 volatile uint32_t PreviousVal = 0;
<> 153:fa9ff456f731 29
<> 153:fa9ff456f731 30 void us_ticker_irq_handler(void);
<> 153:fa9ff456f731 31
<> 153:fa9ff456f731 32 #if defined(TARGET_STM32F0)
<> 153:fa9ff456f731 33 void timer_update_irq_handler(void) {
<> 153:fa9ff456f731 34 #else
<> 153:fa9ff456f731 35 void timer_irq_handler(void)
<> 153:fa9ff456f731 36 {
<> 153:fa9ff456f731 37 #endif
<> 153:fa9ff456f731 38 TimMasterHandle.Instance = TIM_MST;
<> 153:fa9ff456f731 39
<> 153:fa9ff456f731 40 // Clear Update interrupt flag
<> 153:fa9ff456f731 41 if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE) == SET) {
<> 153:fa9ff456f731 42 if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_UPDATE) == SET) {
<> 153:fa9ff456f731 43 __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_UPDATE);
<> 153:fa9ff456f731 44 SlaveCounter++;
<> 153:fa9ff456f731 45 }
<> 153:fa9ff456f731 46 }
<> 153:fa9ff456f731 47
<> 153:fa9ff456f731 48 #if defined(TARGET_STM32F0)
<> 153:fa9ff456f731 49 } // end timer_update_irq_handler function
<> 153:fa9ff456f731 50 // Used for mbed timeout (channel 1) and HAL tick (channel 2)
<> 153:fa9ff456f731 51 void timer_oc_irq_handler(void)
<> 153:fa9ff456f731 52 {
<> 153:fa9ff456f731 53 TimMasterHandle.Instance = TIM_MST;
<> 153:fa9ff456f731 54 #endif
<> 153:fa9ff456f731 55
<> 153:fa9ff456f731 56 // Channel 1 for mbed timeout
<> 153:fa9ff456f731 57 if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
<> 153:fa9ff456f731 58 if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC1) == SET) {
<> 153:fa9ff456f731 59 __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
AnnaBridge 168:e84263d55307 60
<> 153:fa9ff456f731 61 if (oc_int_part > 0) {
<> 153:fa9ff456f731 62 oc_int_part--;
<> 153:fa9ff456f731 63 } else {
AnnaBridge 168:e84263d55307 64 us_ticker_irq_handler();
<> 153:fa9ff456f731 65 }
<> 153:fa9ff456f731 66 }
<> 153:fa9ff456f731 67 }
<> 153:fa9ff456f731 68
<> 153:fa9ff456f731 69 // Channel 2 for HAL tick
<> 153:fa9ff456f731 70 if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC2) == SET) {
AnnaBridge 168:e84263d55307 71
<> 153:fa9ff456f731 72 if (__HAL_TIM_GET_IT_SOURCE(&TimMasterHandle, TIM_IT_CC2) == SET) {
<> 153:fa9ff456f731 73 __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
AnnaBridge 166:e614a9f1c9e2 74 uint32_t val = __HAL_TIM_GET_COUNTER(&TimMasterHandle);
<> 153:fa9ff456f731 75 if ((val - PreviousVal) >= HAL_TICK_DELAY) {
<> 153:fa9ff456f731 76 // Increment HAL variable
<> 153:fa9ff456f731 77 HAL_IncTick();
<> 153:fa9ff456f731 78 // Prepare next interrupt
AnnaBridge 166:e614a9f1c9e2 79 __HAL_TIM_SET_COMPARE(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
<> 153:fa9ff456f731 80 PreviousVal = val;
<> 153:fa9ff456f731 81 #if DEBUG_TICK > 0
<> 153:fa9ff456f731 82 HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
<> 153:fa9ff456f731 83 #endif
<> 153:fa9ff456f731 84 }
<> 153:fa9ff456f731 85 }
<> 153:fa9ff456f731 86 }
<> 153:fa9ff456f731 87 }
<> 153:fa9ff456f731 88
<> 153:fa9ff456f731 89 // Reconfigure the HAL tick using a standard timer instead of systick.
<> 153:fa9ff456f731 90 HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
<> 153:fa9ff456f731 91 {
<> 153:fa9ff456f731 92 // Enable timer clock
<> 153:fa9ff456f731 93 TIM_MST_RCC;
<> 153:fa9ff456f731 94
<> 153:fa9ff456f731 95 // Reset timer
<> 153:fa9ff456f731 96 TIM_MST_RESET_ON;
<> 153:fa9ff456f731 97 TIM_MST_RESET_OFF;
<> 153:fa9ff456f731 98
<> 153:fa9ff456f731 99 // Update the SystemCoreClock variable
<> 153:fa9ff456f731 100 SystemCoreClockUpdate();
<> 153:fa9ff456f731 101
<> 153:fa9ff456f731 102 // Configure time base
<> 153:fa9ff456f731 103 TimMasterHandle.Instance = TIM_MST;
<> 153:fa9ff456f731 104 TimMasterHandle.Init.Period = 0xFFFF;
<> 153:fa9ff456f731 105 TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
<> 153:fa9ff456f731 106 TimMasterHandle.Init.ClockDivision = 0;
<> 153:fa9ff456f731 107 TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
AnnaBridge 168:e84263d55307 108 #if !defined(TARGET_STM32L0)
AnnaBridge 168:e84263d55307 109 TimMasterHandle.Init.RepetitionCounter = 0;
AnnaBridge 168:e84263d55307 110 #endif
AnnaBridge 168:e84263d55307 111 #ifdef TIM_AUTORELOAD_PRELOAD_DISABLE
<> 156:95d6b41a828b 112 TimMasterHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
<> 156:95d6b41a828b 113 #endif
<> 153:fa9ff456f731 114 HAL_TIM_Base_Init(&TimMasterHandle);
<> 153:fa9ff456f731 115
AnnaBridge 168:e84263d55307 116 //LL_TIM_EnableUpdateEvent(TimMasterHandle.Instance);
AnnaBridge 168:e84263d55307 117
<> 153:fa9ff456f731 118 // Configure output compare channel 1 for mbed timeout (enabled later when used)
<> 153:fa9ff456f731 119 HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
<> 153:fa9ff456f731 120
<> 153:fa9ff456f731 121 // Configure output compare channel 2 for HAL tick
<> 153:fa9ff456f731 122 HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
AnnaBridge 166:e614a9f1c9e2 123 PreviousVal = __HAL_TIM_GET_COUNTER(&TimMasterHandle);
AnnaBridge 166:e614a9f1c9e2 124 __HAL_TIM_SET_COMPARE(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
<> 153:fa9ff456f731 125
AnnaBridge 168:e84263d55307 126
AnnaBridge 168:e84263d55307 127
<> 153:fa9ff456f731 128 // Configure interrupts
<> 153:fa9ff456f731 129 // Update interrupt used for 32-bit counter
<> 153:fa9ff456f731 130 // Output compare channel 1 interrupt for mbed timeout
<> 153:fa9ff456f731 131 // Output compare channel 2 interrupt for HAL tick
<> 153:fa9ff456f731 132 #if defined(TARGET_STM32F0)
<> 153:fa9ff456f731 133 NVIC_SetVector(TIM_MST_UP_IRQ, (uint32_t)timer_update_irq_handler);
<> 153:fa9ff456f731 134 NVIC_EnableIRQ(TIM_MST_UP_IRQ);
<> 153:fa9ff456f731 135 NVIC_SetPriority(TIM_MST_UP_IRQ, 0);
<> 153:fa9ff456f731 136 NVIC_SetVector(TIM_MST_OC_IRQ, (uint32_t)timer_oc_irq_handler);
<> 153:fa9ff456f731 137 NVIC_EnableIRQ(TIM_MST_OC_IRQ);
<> 153:fa9ff456f731 138 NVIC_SetPriority(TIM_MST_OC_IRQ, 1);
<> 153:fa9ff456f731 139 #else
<> 153:fa9ff456f731 140 NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
<> 153:fa9ff456f731 141 NVIC_EnableIRQ(TIM_MST_IRQ);
<> 153:fa9ff456f731 142 #endif
<> 153:fa9ff456f731 143
<> 153:fa9ff456f731 144 // Enable interrupts
<> 153:fa9ff456f731 145 __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_UPDATE); // For 32-bit counter
<> 153:fa9ff456f731 146 __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); // For HAL tick
<> 153:fa9ff456f731 147
<> 153:fa9ff456f731 148 // Enable timer
<> 153:fa9ff456f731 149 HAL_TIM_Base_Start(&TimMasterHandle);
<> 153:fa9ff456f731 150
AnnaBridge 174:e131a1973e81 151 #ifndef NDEBUG
AnnaBridge 174:e131a1973e81 152 #ifdef TIM_MST_DBGMCU_FREEZE
AnnaBridge 174:e131a1973e81 153 // Freeze timer on stop/breakpoint
AnnaBridge 174:e131a1973e81 154 TIM_MST_DBGMCU_FREEZE;
AnnaBridge 174:e131a1973e81 155 #endif
AnnaBridge 174:e131a1973e81 156 #endif
AnnaBridge 174:e131a1973e81 157
<> 153:fa9ff456f731 158 #if DEBUG_TICK > 0
AnnaBridge 166:e614a9f1c9e2 159 __HAL_RCC_GPIOB_CLK_ENABLE();
<> 153:fa9ff456f731 160 GPIO_InitTypeDef GPIO_InitStruct;
<> 153:fa9ff456f731 161 GPIO_InitStruct.Pin = GPIO_PIN_6;
<> 153:fa9ff456f731 162 GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
<> 153:fa9ff456f731 163 GPIO_InitStruct.Pull = GPIO_PULLUP;
<> 153:fa9ff456f731 164 GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
<> 153:fa9ff456f731 165 HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
<> 153:fa9ff456f731 166 #endif
<> 153:fa9ff456f731 167
<> 153:fa9ff456f731 168 return HAL_OK;
<> 153:fa9ff456f731 169 }
<> 153:fa9ff456f731 170
<> 153:fa9ff456f731 171 void HAL_SuspendTick(void)
<> 153:fa9ff456f731 172 {
<> 153:fa9ff456f731 173 TimMasterHandle.Instance = TIM_MST;
<> 153:fa9ff456f731 174 __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
<> 153:fa9ff456f731 175 }
<> 153:fa9ff456f731 176
<> 153:fa9ff456f731 177 void HAL_ResumeTick(void)
<> 153:fa9ff456f731 178 {
<> 153:fa9ff456f731 179 TimMasterHandle.Instance = TIM_MST;
<> 153:fa9ff456f731 180 __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
<> 153:fa9ff456f731 181 }
<> 153:fa9ff456f731 182
<> 153:fa9ff456f731 183 #endif // TIM_MST_16BIT