ST-DEVKIT-LRWAN
Dependents: DISCO-L072CZ-LRWAN1-base
Fork of SX1276GenericLib by
LoRa_TODO.txt@60:75426c142f6e, 2017-05-29 (annotated)
- Committer:
- Helmut Tschemernjak
- Date:
- Mon May 29 16:58:41 2017 +0200
- Revision:
- 60:75426c142f6e
- Parent:
- 55:00c1f5b83920
- Child:
- 61:08b50780eb91
Enabled MURATA_SX1276 for the MURATA_SX1276 chip
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Helmut64 | 36:f2b885b6f33e | 1 | |
Helmut Tschemernjak | 39:706c32eda7e7 | 2 | Move finished tasks to Done section: |
Helmut Tschemernjak | 46:e78a1d0391ac | 3 | |
Helmut Tschemernjak | 46:e78a1d0391ac | 4 | TODOs: |
Helmut64 | 37:21fa0615e993 | 5 | - add support for Arduino - add sx1276-Arduino-hal.h/cpp |
Helmut64 | 37:21fa0615e993 | 6 | - add support for Linux - add sx1276-Linux-hal.h/cpp |
Helmut Tschemernjak | 39:706c32eda7e7 | 7 | - Add support for Cad detection before sending a packet |
Helmut Tschemernjak | 39:706c32eda7e7 | 8 | - Add support to provide the send/receive packet buffer, |
Helmut Tschemernjak | 39:706c32eda7e7 | 9 | no need to allocate packet data in the sx1276 driver. Can be provided |
Helmut Tschemernjak | 46:e78a1d0391ac | 10 | Rx/Tx parameters, this avoids double memory usage |
Helmut Tschemernjak | 39:706c32eda7e7 | 11 | - Add support for larger Lora packets (can be up to 2048 bytes) |
Helmut Tschemernjak | 39:706c32eda7e7 | 12 | this feature is not so important, however the current implementation |
Helmut Tschemernjak | 42:72deced1a4c4 | 13 | is very basic. |
Helmut Tschemernjak | 42:72deced1a4c4 | 14 | - It is a little bit strange that RX/TX/Cad Timeout Timer calling the |
Helmut Tschemernjak | 42:72deced1a4c4 | 15 | some handler OnTimeoutIrq. Maybe we just need a single timer, or |
Helmut Tschemernjak | 46:e78a1d0391ac | 16 | it is a good idea to split the OnTimeoutIrq function into separate |
Helmut Tschemernjak | 46:e78a1d0391ac | 17 | callbacks for RX/TX/Cad timeouts |
Helmut Tschemernjak | 46:e78a1d0391ac | 18 | - Test if the SX1276 timeouts. Does rx/tx/sync really uses three different |
Helmut Tschemernjak | 51:aef3234bcb71 | 19 | timers or just one at a time. |
Helmut Tschemernjak | 51:aef3234bcb71 | 20 | - Add API to set the LNA gain |
Helmut Tschemernjak | 39:706c32eda7e7 | 21 | |
Helmut64 | 36:f2b885b6f33e | 22 | |
Helmut64 | 36:f2b885b6f33e | 23 | Done: |
Helmut Tschemernjak | 39:706c32eda7e7 | 24 | - Started a Generic SX1276 driver to support all SX1276 modules (May-2017 Helmut) |
Helmut Tschemernjak | 39:706c32eda7e7 | 25 | - Migrated typedefs code into sx1276.h (7-May-2017 Helmut) |
Helmut Tschemernjak | 39:706c32eda7e7 | 26 | - Migrated enum code into sx1276.h/radio.h (7-May-2017 Helmut) |
Helmut Tschemernjak | 41:2dbc4afedf61 | 27 | - Verify the Murata ANT Switch code |
Helmut Tschemernjak | 41:2dbc4afedf61 | 28 | - MURATA PA_BOOST case,is _antSwitchTXBoost right? (Same as STM sample code) |
Helmut Tschemernjak | 46:e78a1d0391ac | 29 | - Check of the MURATA TCXO config is correct (implemented, check JP9 on STM L0 board) |
Helmut Tschemernjak | 50:43f7160e869c | 30 | - Make the timers more generic and move the OS code into the HAL layer. (May 2017 Helmut) |
Helmut Tschemernjak | 50:43f7160e869c | 31 | - Removed pull down on dio=-dio5 for L151 &LPC11U6X which make no sense to me. May 2017 Helmut |
Helmut Tschemernjak | 50:43f7160e869c | 32 | - Added radio API support to receive the MaxMTUSize (May 2017 Helmut) |
Helmut Tschemernjak | 50:43f7160e869c | 33 | - Added Send optional Send() parameter to include a header, |
Helmut Tschemernjak | 50:43f7160e869c | 34 | this saves additional buffers. (May 2017 Helmut) |
Helmut Tschemernjak | 51:aef3234bcb71 | 35 | - Added proper void * type from sending data, uint8_t * is not appropriate (May 2017 Helmut) |
Helmut Tschemernjak | 51:aef3234bcb71 | 36 | - Use also void pointer for FiFo Write/Read and regular SPI Read/Write |
Helmut Tschemernjak | 54:0d8ea87fbab9 | 37 | - Added return value to Init, we check for a radio availability (May 2017 Helmut) |
Helmut Tschemernjak | 54:0d8ea87fbab9 | 38 | - Added a RxSignalPending which verifies if we have a signal pending in receive state. (May 2017 Helmut) |
Helmut Tschemernjak | 55:00c1f5b83920 | 39 | - Added LoRa bandwidth mapping table, now the SetRx/Tx frequency is in Hz. (May 2017 Helmut) |
Helmut Tschemernjak | 60:75426c142f6e | 40 | - Enabled MURATA_SX1276 for the MURATA_SX1276 chip (May 2017 Helmut) |
Helmut Tschemernjak | 51:aef3234bcb71 | 41 | |
Helmut Tschemernjak | 54:0d8ea87fbab9 | 42 | |
Helmut Tschemernjak | 55:00c1f5b83920 | 43 |