File content as of revision 3:dd5c9690ed0d:

#include "mbed.h"
#include "pinout.h"

#include "CUTTER.h"
#include "EXTRUDER.h"
#include "GRIDDLE.h"
#include "INTERFACE.h"
#include "MACHINE.h"
#include "OVEN.h"
#include "TORTILLA.h"

Ticker timer;
INTERFACE interface(StartStopPin,StartStopRPin,StartStopGPin,StartStopBPin,TortillaPin,TempReadyPin);
EXTRUDER extruder(ExtruderStartPin,ExtruderPWMPin);
CUTTER cutter(CutterUpPin,CutterDownPin,CutterMotorDirectionPin,CutterMotorEnablePin);
GRIDDLE griddle(GriddlePWMPin,GriddleUpPin,GriddleDownPin,GriddleHomePin);
OVEN oven(OvenPWMPin);
MACHINE Lupe(BandPWMPin,TempPin,CapsuleDoorPin,CartridgePin,CuttedPin);
TORTILLA tortilla;

#if defined(DEBUG_MODE)
    static Serial pc(USBTX, USBRX);
    int DebugTimer=0;
#endif

void MANAGER(void);
void init(void);
void checkUp(void);
void ExtruderProduction(void);
void CutterProduction(void);
void GriddleProduction(void);
void OvenProduction(void);

int STATUS=-1;
int GENERAL_TIME=0;


int main(){
    #if defined(DEBUG_MODE)
        pc.printf("\n\n***************************\nMCU variable init OK!\r\n");
    #endif
    init();
    while(1);
}//main

void MANAGER(void){
    GENERAL_TIME++;
    /******************************STATUS CONTROL******************************/
    if(STATUS==HOME){/****************************************************HOME*/
        if(GENERAL_TIME==1){
            #if defined(DEBUG_MODE)
                pc.printf("\nHOME rutine start...\r\n");
            #endif
            interface.setLED(1,1,0);
            interface.setFlash(true);
            cutter.down();
            extruder.Init();
            griddle.Home();
            oven.Home();
        }//if
        if(cutter.available()&&griddle.isFree()){//falta temperatura
            #if defined(DEBUG_MODE)
                pc.printf("\nHOME rutine end...\r\n");
            #endif
            GENERAL_TIME=-1;
            STATUS=IDLE;
            interface.setLED(0,1,0);
        }//if
    }else if(STATUS==IDLE){/**********************************************IDLE*/
        if(IDLE_TIMER==GENERAL_TIME){
            GENERAL_TIME=0;
            if((Lupe.StartCheck())&&(interface.getFlash()))
                interface.setFlash(false);
            if((!Lupe.StartCheck())&&(!interface.getFlash()))
                interface.setFlash(true);
            if(interface.getStart()){
                #if defined(DEBUG_MODE)
                    pc.printf("\nIDLE Done\r\n");
                #endif
                STATUS=INIT_PRODUCTION;
                GENERAL_TIME=-1;
                interface.setLED(1,1,1);
                interface.setFlash(true);
            }//if
        }//if
    }else if(STATUS==INIT_PRODUCTION){/*************************INIT_PRODUCTION*/
        if(GENERAL_TIME==0){//INIT
        }//if
        if(extruder.getSwitch()){//No dough detected
            if(extruder.getTimer()>=500){//Check every 0.5s
                extruder.setTimer(0);
                extruder.GetHome();                     
                #if defined(DEBUG_MODE)
                    pc.printf("\nExtruder finding home on:%f\r\n",extruder.getPosition());
                #endif
            }//if
        }else{
            extruder.setTimer(0);
            cutter.setTimer(0);
            griddle.setTimer(0);
            oven.setTimer(0);
            tortilla.setDP(interface.getTortilla());                
            #if defined(DEBUG_MODE)
                pc.printf("\nProduction of %f Tortillas...\r\n",extruder.getPosition());
            #endif
        }//else
    }else if(STATUS==PRODUCTION){/**********************************PRODUCTION*/
        if(tortilla.getExtruder()){ExtruderProduction();}
        if(tortilla.getCutter()){CutterProduction();}
        if(tortilla.getGriddle()){GriddleProduction();}
        if(tortilla.getOven()){OvenProduction();}
        if(!tortilla.getTortilla()){            
            GENERAL_TIME=-1;
            STATUS=HOME;
            interface.setLED(1,1,0);
            interface.setFlash(true);
        }//if
    }//else if
    checkUp();
    return;
}//MANAGER

void init(void){
    #if defined(DEBUG_MODE)
        pc.printf("\nMachine modules is starting...\r\n");
    #endif
    interface.Init();
    #if defined(DEBUG_MODE)
        pc.printf("INTERFACE OK!\r\n");
    #endif
    Lupe.Init();
    #if defined(DEBUG_MODE)
        pc.printf("MACHINE OK!\r\n");
    #endif
    cutter.Init();
    #if defined(DEBUG_MODE)
        pc.printf("CUTTER OK!\r\n");
    #endif
    extruder.Init();
    #if defined(DEBUG_MODE)
        pc.printf("EXTRUDER OK!\r\n");
    #endif
    griddle.Init();
    #if defined(DEBUG_MODE)
        pc.printf("GRIDDLE OK!\r\n");
    #endif
    oven.Init();
    #if defined(DEBUG_MODE)
        pc.printf("OVEN OK!\r\n");
    #endif
    timer.attach(&MANAGER,0.001);
    #if defined(DEBUG_MODE)
        pc.printf("Time Manager OK!\r\n");
    #endif
    wait(5);
    #if defined(DEBUG_MODE)
        pc.printf("\nInit process done...\r\n");
    #endif
    STATUS=HOME;
    GENERAL_TIME=0;
    return;
}//init

void checkUp(void){
    /*************************GENERAL INTERFACE CONTROL************************/
    interface.check();  //Flash_control; Update_start_button_latch_each 50ms
       
    /*************************GENERAL MACHINE CONTROL**************************/
    
    /*************************GENERAL CUTTER CONTROL***************************/
    cutter.check();     //Add_production_timer; Check_cutt_status;
                        //Manage_cutting_process
    
    /*************************GENERAL EXTRUDER CONTROL*************************/
    extruder.check();   //Add_timer
       
    /*************************GENERAL GRIDDLE CONTROL**************************/
    griddle.check();    //Add_timer; Manage_Griddle_press
    
    /*************************GENERAL OVEN CONTROL*****************************/
    
    
    /***********************GENERAL TORITLLA CONTROL***************************/
    tortilla.check();
    return;
}//checkUp

void ExtruderProduction(void){
    if((extruder.getTimer()>=5000)&&(extruder.getPosition()>=0.1)){//Check every 5s
        extruder.setTimer(0);
        extruder.Step();
        tortilla.addExtruder();
        cutter.setTimer(0);
        #if defined(DEBUG_MODE)
            pc.printf("\nExtruder position:%f\r\n",extruder.getPosition());
        #endif
    }//if
    if(extruder.getPosition()>=0.1){
        tortilla.setExtruder(false);
        #if defined(DEBUG_MODE)
            pc.printf("\nExtruder reached end position\r\n");
        #endif
    }//if
    return;
}//ExtruderProduction

void CutterProduction(void){
    if((cutter.getTimer()==5000)&&(tortilla.getExtruderCount()>tortilla.getCutterCount())){
        cutter.cutt();
        tortilla.addCutter();
    }//if
    return;
}//CutterProduction

void GriddleProduction(void){
    return;
}//GriddleProduction

void OvenProduction(void){
    return;
}//OvenProduction