Diff: OpenBCI_32_Daisy.h
- Revision:
- 1:4683702d7ad8
- Parent:
- 0:2cb59ea20ace
--- a/OpenBCI_32_Daisy.h Sun Dec 04 03:38:44 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,137 +0,0 @@
-/*
- insert header here
-
-*/
-#ifndef _____OpenBCI_32_Daisy__
-#define _____OpenBCI_32_Daisy__
-
-
-//#include <DSPI.h> // MBED: not needed
-//#include <WProgram.h> // MBED: not needed
-#include "PlatformDefs.h" // MBED: hardware emulation
-#include "Definitions_32_Daisy.h"
-
-
-
-
-class OpenBCI_32_Daisy {
-public:
- DSPI0 spi; // use DSPI library
-
-// BOARD
- boolean useAccel;
- boolean useAux;
- void initialize(void); // ADD DAISY USE outputType
- void printAllRegisters(void); // ADD DAISY USE outputType
- void sendChannelData(void); // send the current data with sample number
- void startStreaming(void); // ADD DAISY USE outputType
- void stopStreaming(void); // ADD DAISY USE outputType
-
-// ADS1299
- void initialize_ads(void);
- void updateChannelSettings(void);
- void writeChannelSettings(void);
- void writeChannelSettings(byte);
- void setChannelsToDefault(void);
- void setChannelsToEMG(void);
- void setChannelsToECG(void);
- void reportDefaultChannelSettings(void);
- void printADSregisters(int);
- void WAKEUP(int); // get out of low power mode
- void STANDBY(int); // go into low power mode
- void RESET(int); // set all register values to default
- void START(int); // start data acquisition
- void STOP(int); // stop data acquisition
- void RDATAC(int); // go into read data continuous mode
- void SDATAC(int); // get out of read data continuous mode
- void RDATA(int); // read data one-shot
- byte RREG(byte,int); // read one ADS register
- void RREGS(byte,byte,int); // read multiple ADS registers
- void WREG(byte,byte,int); // write one ADS register
- void WREGS(byte,byte,int); // write multiple ADS registers
- byte ADS_getDeviceID(int);
- void printRegisterName(byte); // used for verbosity
- void printHex(byte); // used for verbosity
- void updateChannelData(void); // retrieve data from ADS
- void updateBoardData(void);
- void updateDaisyData(void);
- byte xfer(byte); // SPI Transfer function
- void resetADS(int); // reset all the ADS1299's settings
- void startADS(void);
- void stopADS(void);
- void activateChannel(byte); // enable the selected channel
- void deactivateChannel(byte); // disable given channel 1-8(16)
- void configureLeadOffDetection(byte,byte);
- void changeChannelLeadOffDetect(void);
- void changeChannelLeadOffDetect(byte);
- void configureInternalTestSignal(byte,byte);
- void changeInputType(byte);
- boolean isDataAvailable(void);
- void ADS_writeChannelData(void);
- // void ADS_printDeviceID(int); //
- boolean smellDaisy(void);
- void removeDaisy(void);
- void attachDaisy(void);
- void writeAuxData(void);
-
- short auxData[3];
- byte regData[24]; // array is used to mirror register data
- byte lastBoardDataRaw[24];
- byte boardChannelDataRaw[24]; // array to hold raw channel data
- byte meanBoardDataRaw[24];
- byte lastDaisyDataRaw[24];
- byte daisyChannelDataRaw[24];
- byte meanDaisyDataRaw[24];
- int boardStat; // used to hold the status register
- int daisyStat;
- int boardChannelDataInt[8]; // array used when reading channel data as ints
- int lastBoardChannelDataInt[8];
- int meanBoardChannelDataInt[8];
- int daisyChannelDataInt[8]; // array used when reading channel data as ints
- int lastDaisyChannelDataInt[8];
- int meanDaisyChannelDataInt[8];
- int numChannels;
- byte channelSettings[16][6]; // array to hold current channel settings
- byte defaultChannelSettings[6]; // default channel settings
- byte leadOffSettings[16][2]; // used to control on/off of impedance measure for P and N side of each channel
- boolean useInBias[16]; // used to remember if we were included in Bias before channel power down
- boolean useSRB2[16];
- boolean boardUseSRB1; // used to keep track of if we are using SRB1
- boolean daisyUseSRB1;
- boolean verbosity; // turn on/off Serial verbosity
- boolean daisyPresent;
- boolean firstDataPacket;
- byte sampleCounter;
-
-// LIS3DH
- short axisData[3];
- void initialize_accel(byte); // initialize
- void enable_accel(byte); // start acceleromoeter with default settings
- void disable_accel(void); // stop data acquisition and go into low power mode
- byte LIS3DH_getDeviceID(void);
- byte LIS3DH_read(byte); // read a register on LIS3DH
- void LIS3DH_write(byte,byte); // write a register on LIS3DH
- int LIS3DH_read16(byte); // read two bytes, used to get axis data
- int getX(void);
- int getY(void);
- int getZ(void);
- boolean LIS3DH_DataReady(void); // check LIS3DH_DRDY pin
- boolean LIS3DH_DataAvailable(void); // check LIS3DH STATUS_REG2
- void LIS3DH_readAllRegs(void);
- void LIS3DH_writeAxisData(void);
- void LIS3DH_updateAxisData(void);
-
- void csLow(int);
- void csHigh(int);
-
-
-private:
-// ADS1299
- boolean isRunning;
-// LIS3DH
- int DRDYpinValue;
- int lastDRDYpinValue;
-
-};
-
-#endif