Revision 0:706ce7540c8f, committed 2015-03-29

Comitter:

akashvibhute

Date:

Sun Mar 29 08:50:27 2015 +0000

Commit message:

MPU DMP code modified for use with ST Nucelo boards. This program makes use of I2Cdev based DMP library.

Changed in this revision

diff -r 000000000000 -r 706ce7540c8f MPU6050_DMP_Nucleo-I2Cdev.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MPU6050_DMP_Nucleo-I2Cdev.lib	Sun Mar 29 08:50:27 2015 +0000
@@ -0,0 +1,1 @@
+http://developer.mbed.org/users/akashvibhute/code/MPU6050_DMP_Nucleo-I2Cdev/#d4284f5b4fc7

diff -r 000000000000 -r 706ce7540c8f config.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/config.h	Sun Mar 29 08:50:27 2015 +0000
@@ -0,0 +1,18 @@
+// FIFO rate = 200Hz / (1 + this value)
+// For example, 0x01 is 100Hz, 0x03 is 50Hz.
+// 0x00 to 0x09
+#define IMU_FIFO_RATE_DIVIDER 0x09
+
+// Sample rate = 1kHz / (1 + this valye)
+// For example, 4 is 200Hz.
+#define IMU_SAMPLE_RATE_DIVIDER 4
+
+// measuring range of gyroscope (±n deg/s)
+// But other value doesn't yet support.
+#define MPU6050_GYRO_FS MPU6050_GYRO_FS_2000
+
+// measuring range of acceleration sensor (±n g)
+// But other value doesn't yet support.
+#define MPU6050_ACCEL_FS MPU6050_ACCEL_FS_2
+
+#define PC_BAUDRATE 921600
\ No newline at end of file

diff -r 000000000000 -r 706ce7540c8f main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Mar 29 08:50:27 2015 +0000
@@ -0,0 +1,186 @@
+/* Demo code for MPU6050 DMP
+ * I thank Ian Hua.
+ * Copyright (c) 2015 Match
+ *
+ * THE PROGRAM IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE PROGRAM OR THE USE OR OTHER DEALINGS IN
+ * THE PROGRAM.
+ */
+
+/*
+ *
+ *  Modified by Akash Vibhute on 29 March 2015
+ *  This program now works well with Nucelo boards from ST
+ *
+ */
+
+
+
+// Define Necessary.
+//#define OUTPUT_QUATERNION
+//#define OUTPUT_EULER
+#define OUTPUT_ROLL_PITCH_YAW
+//#define OUTPUT_FOR_TEAPOT
+//#define OUTPUT_TEMPERATURE
+
+
+#include "MPU6050_6Axis_MotionApps20.h"
+#include "mbed.h"
+#include "config.h"
+#include <stdio.h>
+
+
+#define DEG_TO_RAD(x) ( x * 0.01745329 )
+#define RAD_TO_DEG(x) ( x * 57.29578 )
+
+
+RawSerial pc(USBTX, USBRX);
+
+
+MPU6050 mpu(PB_9, PB_8);     // sda, scl pin
+InterruptIn INT0(PA_8);     // INT0 pin
+
+const int FIFO_BUFFER_SIZE = 128;
+uint8_t fifoBuffer[FIFO_BUFFER_SIZE];
+uint16_t fifoCount;
+uint16_t packetSize;
+bool dmpReady;
+uint8_t mpuIntStatus;
+const int snprintf_buffer_size = 100;
+char snprintf_buffer[snprintf_buffer_size];
+uint8_t teapotPacket[14] = { '$', 0x02, 0,0, 0,0, 0,0, 0,0, 0x00, 0x00, '\r', '\n' };
+
+struct Offset {
+    int16_t ax, ay, az;
+    int16_t gx, gy, gz;
+}offset = {150, -350, 1000, -110, 5, 0};    // Measured values
+
+struct MPU6050_DmpData {
+    Quaternion q;
+    VectorFloat gravity;    // g
+    float roll, pitch, yaw;     // rad
+}dmpData;
+
+bool Init();
+void dmpDataUpdate();
+
+
+int main() {
+    MBED_ASSERT(Init() == true);
+    
+    while(1) {
+        
+    }
+}
+
+
+bool Init() {
+    pc.baud(PC_BAUDRATE);
+    
+    INT0.mode(PullDown);
+    INT0.fall(dmpDataUpdate);
+    
+    mpu.initialize();
+    if (mpu.testConnection()) {
+        pc.puts("MPU6050 test connection passed.\n");
+    } else {
+        pc.puts("MPU6050 test connection failed.\n");
+        return false;
+    }
+    if (mpu.dmpInitialize() == 0) {
+        pc.puts("succeed in MPU6050 DMP Initializing.\n");
+    } else {
+        pc.puts("failed in MPU6050 DMP Initializing.\n");
+        return false;
+    }
+    mpu.setXAccelOffset(offset.ax);
+    mpu.setYAccelOffset(offset.ay);
+    mpu.setZAccelOffset(offset.az);
+    mpu.setFullScaleGyroRange(MPU6050_GYRO_FS_2000);
+    mpu.setFullScaleAccelRange(MPU6050_ACCEL_FS_2);
+    mpu.setXGyroOffsetUser(offset.gx);
+    mpu.setYGyroOffsetUser(offset.gy);
+    mpu.setZGyroOffsetUser(offset.gz);
+    mpu.setDMPEnabled(true);    // Enable DMP
+    packetSize = mpu.dmpGetFIFOPacketSize();
+    dmpReady = true;    // Enable interrupt.
+    
+    pc.puts("Init finish!\n");
+    
+    return true;
+}
+
+
+void dmpDataUpdate() {
+    // Check that this interrupt has enabled.
+    if (dmpReady == false) return;
+    
+    mpuIntStatus = mpu.getIntStatus();
+    fifoCount = mpu.getFIFOCount();
+    
+    // Check that this interrupt is a FIFO buffer overflow interrupt.
+    if ((mpuIntStatus & 0x10) || fifoCount == 1024) {
+        mpu.resetFIFO();
+        pc.puts("FIFO overflow!\n");
+        return;
+        
+    // Check that this interrupt is a Data Ready interrupt.
+    } else if (mpuIntStatus & 0x02) {
+        while (fifoCount < packetSize) fifoCount = mpu.getFIFOCount();
+        
+        mpu.getFIFOBytes(fifoBuffer, packetSize);
+        
+    #ifdef OUTPUT_QUATERNION
+        mpu.dmpGetQuaternion(&dmpData.q, fifoBuffer);
+        if ( snprintf( snprintf_buffer, snprintf_buffer_size, "Quaternion : w=%f, x=%f, y=%f, z=%f\n", dmpData.q.w, dmpData.q.x, dmpData.q.y, dmpData.q.z ) < 0 ) return;
+        pc.puts(snprintf_buffer);
+    #endif
+        
+    #ifdef OUTPUT_EULER
+        float euler[3];
+        mpu.dmpGetQuaternion(&dmpData.q, fifoBuffer);
+        mpu.dmpGetEuler(euler, &dmpData.q);
+        if ( snprintf( snprintf_buffer, snprintf_buffer_size, "Euler : psi=%fdeg, theta=%fdeg, phi=%fdeg\n", RAD_TO_DEG(euler[0]), RAD_TO_DEG(euler[1]), RAD_TO_DEG(euler[2]) ) < 0 ) return;
+        pc.puts(snprintf_buffer);
+    #endif
+        
+    #ifdef OUTPUT_ROLL_PITCH_YAW
+        mpu.dmpGetQuaternion(&dmpData.q, fifoBuffer);
+        mpu.dmpGetGravity(&dmpData.gravity, &dmpData.q);
+        float rollPitchYaw[3];
+        mpu.dmpGetYawPitchRoll(rollPitchYaw, &dmpData.q, &dmpData.gravity);
+        dmpData.roll = rollPitchYaw[2];
+        dmpData.pitch = rollPitchYaw[1];
+        dmpData.yaw = rollPitchYaw[0];
+        
+        if ( snprintf( snprintf_buffer, snprintf_buffer_size, "Roll:%6.2fdeg, Pitch:%6.2fdeg, Yaw:%6.2fdeg\n", RAD_TO_DEG(dmpData.roll), RAD_TO_DEG(dmpData.pitch), RAD_TO_DEG(dmpData.yaw) ) < 0 ) return;
+        pc.puts(snprintf_buffer);
+    #endif
+        
+    #ifdef OUTPUT_FOR_TEAPOT
+        teapotPacket[2] = fifoBuffer[0];
+        teapotPacket[3] = fifoBuffer[1];
+        teapotPacket[4] = fifoBuffer[4];        
+        teapotPacket[5] = fifoBuffer[5];
+        teapotPacket[6] = fifoBuffer[8];
+        teapotPacket[7] = fifoBuffer[9];
+        teapotPacket[8] = fifoBuffer[12];
+        teapotPacket[9] = fifoBuffer[13];
+        for (uint8_t i = 0; i < 14; i++) {
+            pc.putc(teapotPacket[i]);
+        }
+    #endif
+        
+    #ifdef OUTPUT_TEMPERATURE
+        float temp = mpu.getTemperature() / 340.0 + 36.53;
+        if ( snprintf( snprintf_buffer, snprintf_buffer_size, "Temp:%4.1fdeg\n", temp ) < 0 ) return;
+        pc.puts(snprintf_buffer);
+    #endif
+        
+        pc.puts("\n");
+    }
+}
\ No newline at end of file

diff -r 000000000000 -r 706ce7540c8f mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Mar 29 08:50:27 2015 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/487b796308b0
\ No newline at end of file