Simple library for the DHT11 temperature and humidity sensor. Forked from an existing Mbed DHT11 project.
Simple DHT11 temperature and humidity library.
Example usage
#include "mbed.h" #include "DHT11.h" DHT11 dht(D8); // Change pin name here if required main() { printf("T:%d, H:%d\r\n", dht.readTemperature(), dht.readHumidity()); }
The sensor may be read as often as desired, but temperature and humidity values are cached and will only be updated if they are more than 2 seconds old. This is the underlying sensor update rate.
Please note that this project has been modified only enough to make it work for its intended purpose. Various parts of this project still need work, and the source code should not be seen as an example of best practice.
DHT11.cpp
- Committer:
- s_inoue_mbed
- Date:
- 2014-09-10
- Revision:
- 0:4d4c5ea17d86
- Child:
- 1:95b80cc3f676
File content as of revision 0:4d4c5ea17d86:
/** @file Library for the use of the DHT11, a temperature and humidity sensor Shigenori Inoue, September 10, 2014 */ #include "DHT11.h" // Constructor DHT11::DHT11(PinName pin) : io(pin, PIN_INPUT, OpenDrain, 1), io_irq(pin) { io_irq.rise(this, &DHT11::pos_edge); io_irq.fall(this, &DHT11::neg_edge); io_irq.disable_irq(); init(); } // Destructor DHT11::~DHT11(void) {} // Reading the data bits from DHT11 int DHT11::readData() { // Initialize eod = false; err = OK; data = 0; cnt = 0; wdt = 0; // Checking the measurement frequency if (t.read_ms() < 2000 & first_time == false) { t.reset(); return TOO_FAST_READ; } // Checking the data bus if (io == 0) { io.input(); return BUS_BUSY; } // Sending start signal io.output(); t.reset(); t.start(); do { io = 0; } while (t.read_ms() < 18); io.input(); io = 1; // Waiting for the start of the response signal t.reset(); t.start(); do { if (t.read_us() > 100) { io.input(); io = 1; return NOT_PRESENT; } } while (io == 1); // Wainting for the start of the ready signal t.reset(); t.start(); do { if (t.read_us() > 100) { io.input(); io = 1; return NOT_READY; } } while (io == 0); // Wainting for the end of the ready signal t.reset(); t.start(); do {} while (io == 1); // Starting the pulse width sensing io_irq.enable_irq(); do { wait_us(100); if (wdt > 50) { return WATCHDOG_ERR; } wdt++; } while (eod == false); // Calculating the check sum chksum = ((data & 0xff00000000) >> 32) + ((data & 0x00ff000000) >> 24) + ((data & 0x0000ff0000) >> 16) + ((data & 0x000000ff00) >> 8); if (chksum != (data & 0x00000000ff)) { io.input(); io = 1; return CHKSUM_ERR; } else { t.reset(); first_time = false; return OK; } } // Extracting humidity data from the received data int DHT11::readHumidity() { if (err == OK) { return (data & 0xff00000000) >> 32; } else { return 0xffffffff; } } // Extracting temperature data from the received data int DHT11::readTemperature() { if (err == OK) { return (data & 0x0000ff0000) >> 16; } else { return 0xffffffff; } } // Initialization of variables void DHT11::init(void) { t_pulse_us = 0; first_time = true; data = 0; chksum = 0; cnt = 0; wdt = 0; err = OK; eod = false; } void DHT11::pos_edge(void) { // Disabling the interruptions io_irq.disable_irq(); // Initializing the Timer t.reset(); // Enabling the interruptions io_irq.enable_irq(); } void DHT11::neg_edge(void) { // Disabling the interruptions io_irq.disable_irq(); // Reading the length of t_pulse_us = t.read_us(); // Detecting 0 if the pulse width ranges from 26 us to 28 us if (20 <= t_pulse_us && t_pulse_us <= 30) { // Shifting the data buffer and not adding 1 (because this bit is zero) data = data << 1; // Counting up the bits cnt++; } // Detecting 1 if the pulse width ranges from 68 us to 72 us else if (60 <= t_pulse_us && t_pulse_us <= 80) { // Shifting the data buffer and adding 1 (because this bit is one) data = data << 1; data++; // Counting up the bits cnt++; } // Detecting the end of Data if (cnt < 40) { // Enabling the interruptions io_irq.enable_irq(); } else { eod = true; } }