Akash Gaikwad
Hexiware_voltmeter_code_MCP3201_ADC
Revision 0:459e9fc6e491, committed 2017-03-22
- Comitter:
- agaikwad
- Date:
- Wed Mar 22 01:13:04 2017 +0000
- Commit message:
- Hexiware_voltmeter_code_MCP3201_ADC
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/.gitignore Wed Mar 22 01:13:04 2017 +0000 @@ -0,0 +1,4 @@ +.build +.mbed +projectfiles +*.py*
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/README.md Wed Mar 22 01:13:04 2017 +0000 @@ -0,0 +1,87 @@ +# Getting started with Blinky on mbed OS + +This guide reviews the steps required to get Blinky working on an mbed OS platform. + +Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli). + +## Import the example application + +From the command-line, import the example: + +``` +mbed import mbed-os-example-blinky +cd mbed-os-example-blinky +``` + +### Now compile + +Invoke `mbed compile`, and specify the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5: + +``` +mbed compile -m K64F -t ARM +``` + +Your PC may take a few minutes to compile your code. At the end, you see the following result: + +``` +[snip] ++----------------------------+-------+-------+------+ +| Module | .text | .data | .bss | ++----------------------------+-------+-------+------+ +| Misc | 13939 | 24 | 1372 | +| core/hal | 16993 | 96 | 296 | +| core/rtos | 7384 | 92 | 4204 | +| features/FEATURE_IPV4 | 80 | 0 | 176 | +| frameworks/greentea-client | 1830 | 60 | 44 | +| frameworks/utest | 2392 | 512 | 292 | +| Subtotals | 42618 | 784 | 6384 | ++----------------------------+-------+-------+------+ +Allocated Heap: unknown +Allocated Stack: unknown +Total Static RAM memory (data + bss): 7168 bytes +Total RAM memory (data + bss + heap + stack): 7168 bytes +Total Flash memory (text + data + misc): 43402 bytes +Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin +``` + +### Program your board + +1. Connect your mbed device to the computer over USB. +1. Copy the binary file to the mbed device. +1. Press the reset button to start the program. + +The LED on your platform turns on and off. + +## Export the project to Keil MDK, and debug your application + +From the command-line, run the following command: + +``` +mbed export -m K64F -i uvision +``` + +To debug the application: + +1. Start uVision. +1. Import the uVision project generated earlier. +1. Compile your application, and generate an `.axf` file. +1. Make sure uVision is configured to debug over CMSIS-DAP (From the Project menu > Options for Target '...' > Debug tab > Use CMSIS-DAP Debugger). +1. Set breakpoints, and start a debug session. + + + +## Troubleshooting + +1. Make sure `mbed-cli` is working correctly and its version is `>1.0.0` + + ``` + mbed --version + ``` + + If not, you can update it: + + ``` + pip install mbed-cli --upgrade + ``` + +2. If using Keil MDK, make sure you have a license installed. [MDK-Lite](http://www.keil.com/arm/mdk.asp) has a 32 KB restriction on code size. \ No newline at end of file
Binary file img/uvision.png has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Wed Mar 22 01:13:04 2017 +0000
@@ -0,0 +1,34 @@
+#include "mbed.h"
+
+SPI spi(PTC6,PTC7,PTC5); // (MOSI MISO CLK)setup SPI interface on pins PTC5,PTC6,PTC7
+
+DigitalOut cs2(PTC3);
+
+Serial pc(USBTX, USBRX);
+
+
+
+int main()
+{
+ spi.format(8,0);
+ spi.frequency(1000000);
+ pc.printf("Analog read test from spi.\n");
+ while (true)
+ {
+
+ cs2=0;
+ int high_byte = spi.write(0);
+ int low_byte = spi.write(0);
+ cs2=1;
+ float x = ((high_byte & 0x1f) << 7) | ((low_byte >> 1));
+
+ float r= (float)((x*33)/4096); // show value in volts.
+
+ pc.printf("AD Voltage channel value: %f Volt\r\n", r-16.5);
+ pc.printf("Voltage Analog Value: %.2f\n\r",x);
+ wait_ms(500);
+ }
+
+
+}
+
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os.lib Wed Mar 22 01:13:04 2017 +0000 @@ -0,0 +1,1 @@ +https://github.com/ARMmbed/mbed-os/#f4864dc6429e1ff5474111d4e0f6bee36a759b1c