Diff: SX1272/SX1272_LoRaRadio.cpp

Revision:

2:6c5853c2fd72

Parent:

1:3bdd6f917bf5

--- a/SX1272/SX1272_LoRaRadio.cpp	Thu Nov 12 21:35:41 2020 +0000
+++ b/SX1272/SX1272_LoRaRadio.cpp	Thu Nov 12 22:09:59 2020 +0000
@@ -199,9 +199,6 @@
     }
 
     radio_is_active = false;
-    
-    trace_timer.reset();
-    trace_timer.start();
 
 #ifdef MBED_CONF_RTOS_PRESENT
     irq_thread.start(mbed::callback(this, &SX1272_LoRaRadio::rf_irq_task));
@@ -241,8 +238,6 @@
  */
 void SX1272_LoRaRadio::init_radio(radio_events_t *events)
 {
-    push_trace(SX1272_init_radio);
-    
     _radio_events = events;
 
     // Reset the radio transceiver
@@ -279,7 +274,6 @@
 bool SX1272_LoRaRadio::check_rf_frequency(uint32_t frequency)
 {
     // Implement check. Currently all frequencies are supported ? What band ?
-    push_trace(SX1272_check_rf_frequency);
     return true;
 }
 
@@ -288,7 +282,6 @@
  */
 void SX1272_LoRaRadio::set_channel(uint32_t freq)
 {
-    push_trace(SX1272_set_channel);
     _rf_settings.channel = freq;
     freq = (uint32_t) ((float) freq / (float) FREQ_STEP);
     write_to_register(REG_FRFMSB, (uint8_t) ((freq >> 16) & 0xFF));
@@ -301,7 +294,6 @@
  */
 uint8_t SX1272_LoRaRadio::get_status(void)
 {
-    push_trace(SX1272_get_status);
     return _rf_settings.state;
 }
 
@@ -311,8 +303,6 @@
 
 void SX1272_LoRaRadio::sleep()
 {
-    push_trace(SX1272_sleep);
-    
     // stop timers
     tx_timeout_timer.detach();
     rx_sync_timer.detach();
@@ -328,8 +318,6 @@
  */
 void SX1272_LoRaRadio::set_operation_mode(uint8_t mode)
 {
-    push_trace(SX1272_set_operation_mode);
-    
     if (mode == RF_OPMODE_SLEEP) {
         set_low_power_mode(true);
     } else {
@@ -348,8 +336,6 @@
  */
 void SX1272_LoRaRadio::set_modem(uint8_t modem)
 {
-    push_trace(SX1272_set_modem);
-    
     if ((read_register(REG_OPMODE) & RFLR_OPMODE_LONGRANGEMODE_ON) != 0 ) {
         _rf_settings.modem = MODEM_LORA;
     } else {
@@ -397,7 +383,6 @@
  */
 void SX1272_LoRaRadio::radio_reset()
 {
-    push_trace(SX1272_radio_reset);
     _reset_ctl.output();
     _reset_ctl = 0;
     wait_ms(2);
@@ -418,7 +403,6 @@
                          bool crc_on, bool freq_hop_on, uint8_t hop_period,
                          bool iq_inverted, bool rx_continuous)
 {
-    push_trace(SX1272_set_rx_config);
     set_modem(modem);
 
     switch (modem) {
@@ -548,7 +532,6 @@
                                      uint8_t hop_period, bool iq_inverted,
                                      uint32_t timeout)
 {
-    push_trace(SX1272_set_tx_config);
     set_modem(modem);
     set_rf_tx_power(power);
 
@@ -668,8 +651,6 @@
 uint32_t SX1272_LoRaRadio::time_on_air(radio_modems_t modem, uint8_t pkt_len)
 {
     uint32_t airtime = 0;
-    
-    push_trace(SX1272_time_on_air);
 
     switch (modem) {
         case MODEM_FSK: {
@@ -731,8 +712,6 @@
 void SX1272_LoRaRadio::send(uint8_t *buffer, uint8_t size)
 {
     uint32_t tx_timeout = 0;
-    
-    push_trace(SX1272_send);
 
     switch (_rf_settings.modem) {
         case MODEM_FSK:
@@ -816,8 +795,6 @@
  */
 void SX1272_LoRaRadio::transmit(uint32_t timeout)
 {
-    push_trace(SX1272_transmit);
-    
     switch (_rf_settings.modem) {
 
         case MODEM_FSK:
@@ -905,8 +882,6 @@
  */
 void SX1272_LoRaRadio::receive(void)
 {
-    push_trace(SX1272_receive);
-    
     switch (_rf_settings.modem) {
         case MODEM_FSK:
             // DIO0=PayloadReady
@@ -1037,8 +1012,6 @@
  */
 void SX1272_LoRaRadio::set_max_payload_length(radio_modems_t modem, uint8_t max)
 {
-    push_trace(SX1272_set_max_payload_length);
-    
     set_modem(modem);
 
     switch (modem) {
@@ -1060,8 +1033,6 @@
  */
 void SX1272_LoRaRadio::set_public_network(bool enable)
 {
-    push_trace(SX1272_set_public_network);
-    
     set_modem(MODEM_LORA);
 
     _rf_settings.lora.public_network = enable;
@@ -1091,8 +1062,6 @@
     bool status = true;
     int16_t rssi = 0;
     
-    push_trace(SX1272_perform_carrier_sense);
-
     set_modem(modem);
     set_channel(freq);
     set_operation_mode(RF_OPMODE_RECEIVER);
@@ -1128,8 +1097,6 @@
 {
     uint8_t reg_val;
     
-    push_trace(SX1272_start_cad);
-    
     switch (_rf_settings.modem) {
         case MODEM_FSK:
             break;
@@ -1164,8 +1131,6 @@
                                               uint16_t time)
 {
     uint8_t reg_val;
-    
-    push_trace(SX1272_set_tx_continuous_wave);
 
     set_channel(freq);
     set_tx_config(MODEM_FSK, power, 0, 0, 4800, 0, 5, false, false, 0, 0, 0, time * 1000);
@@ -1186,7 +1151,6 @@
  */
 void SX1272_LoRaRadio::standby( void )
 {
-    push_trace(SX1272_standby);
     tx_timeout_timer.detach();
     rx_sync_timer.detach();
     lora_cad_timer.detach();
@@ -1209,8 +1173,6 @@
 {
     uint8_t i;
     uint32_t rnd = 0;
-    
-    push_trace(SX1272_random);
 
     // Set LoRa modem ON
     set_modem(MODEM_LORA);
@@ -1758,8 +1720,6 @@
 void SX1272_LoRaRadio::handle_dio0_irq()
 {
     volatile uint8_t irqFlags = 0;
-    
-    push_trace(SX1272_dio0_irq);
 
     switch (_rf_settings.state) {
         case RF_RX_RUNNING:
@@ -1936,8 +1896,6 @@
 
 void SX1272_LoRaRadio::handle_dio1_irq()
 {
-    push_trace(SX1272_dio1_irq);
-    
     switch(_rf_settings.state )
        {
            case RF_RX_RUNNING:
@@ -2004,8 +1962,6 @@
 
 void SX1272_LoRaRadio::handle_dio2_irq(void)
 {
-    push_trace(SX1272_dio2_irq);
-    
     switch(_rf_settings.state )
     {
         case RF_RX_RUNNING:
@@ -2064,7 +2020,6 @@
 
 void SX1272_LoRaRadio::handle_timeout_irq()
 {
-    push_trace(SX1272_timeout_irq);
     tx_timeout_timer.detach();
 
     if (_rf_settings.state == RF_TX_RUNNING) {
@@ -2109,8 +2064,6 @@
     }
     else
     {
-        push_trace(SX1272_rxsymb_irq);
-            
         // Sync time out
         _rf_settings.state = RF_IDLE;
             
@@ -2184,23 +2137,3 @@
         }
     }
 }
-
-bool SX1272_LoRaRadio::pop_trace(SX1272_Trace &trace)
-{
-    if (trace_buf.empty()) {
-        return false;
-    }
-    trace_buf.pop(trace);
-    return true;
-}
-
-void SX1272_LoRaRadio::push_trace(uint32_t state)
-{
-    SX1272_Trace trace;
-    
-    trace.state = state;
-    trace.interval = trace_timer.read_us();
-    trace_timer.reset();
-    
-    trace_buf.push(trace);
-}