Antonio Mondragon / Mbed OS ATT_AWS_IoT_demo

DIYmall 0.96" Inch I2c IIC Serial 128x64 Oled LCD LED White Display Module

Dependencies:   Adafruit_GFX SDFileSystem

Fork of ATT_AWS_IoT_demo by AT&T IoT

WNCInterface/WncControllerK64F/MODSERIAL/Device/MODSERIAL_KSDK.h

Committer:
afmiee
Date:
2018-10-09
Revision:
28:4650c541b029
Parent:
15:6f2798e45099

File content as of revision 28:4650c541b029:

#if defined (TARGET_KPSDK_MCUS)

#define MODSERIAL_IRQ_REG ((UART_Type*)_base)->C2
#define DISABLE_TX_IRQ MODSERIAL_IRQ_REG &= ~(1UL << UART_C2_TIE_SHIFT)
#define DISABLE_RX_IRQ MODSERIAL_IRQ_REG &= ~(1UL << UART_C2_RIE_SHIFT)
#define ENABLE_TX_IRQ MODSERIAL_IRQ_REG |= (1UL << UART_C2_TIE_SHIFT)
#define ENABLE_RX_IRQ MODSERIAL_IRQ_REG |= (1UL << UART_C2_RIE_SHIFT)

#define MODSERIAL_READ_REG ((UART_Type*)_base)->D
#define MODSERIAL_WRITE_REG ((UART_Type*)_base)->D
#define MODSERIAL_READABLE ((((UART_Type*)_base)->S1 & (1UL<<5)) != 0)
#define MODSERIAL_WRITABLE ((((UART_Type*)_base)->S1 & (1UL<<7)) != 0)

#define RESET_TX_FIFO while(0 == 1)
#define RESET_RX_FIFO while(MODSERIAL_READABLE) char dummy = MODSERIAL_READ_REG

#define RX_IRQ_ENABLED ((MODSERIAL_IRQ_REG & (1UL << UART_C2_RIE_SHIFT)) != 0 )
#define TX_IRQ_ENABLED ((MODSERIAL_IRQ_REG & (1UL << UART_C2_TIE_SHIFT)) != 0 )

#endif