123
utility/os2_stoip6.c
- Committer:
- advxolltm
- Date:
- 2022-06-06
- Revision:
- 19:543c2d21e510
- Parent:
- 16:269f652b4d0b
File content as of revision 19:543c2d21e510:
/* * Copyright (c) 2014-2015 ARM Limited. All rights reserved. * SPDX-License-Identifier: Apache-2.0 * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "mbed_version.h" #if MBED_MAJOR_VERSION == 2 #include <string.h> #include <stdlib.h> #include <stdint.h> #include "common_functions.h" #include "ip6string.h" static uint16_t hex(const char *p); static bool is_hex(char c); /** * Convert numeric IPv6 address string to a binary. * IPv4 tunnelling addresses are not covered. * \param ip6addr IPv6 address in string format. * \param len Length of ipv6 string. * \param dest buffer for address. MUST be 16 bytes. * \return boolean set to true if conversion succeed, false if it didn't */ bool stoip6(const char *ip6addr, size_t len, void *dest) { uint8_t *addr; const char *p, *q; int_fast8_t field_no, coloncolon = -1; addr = dest; if (len > 39) { // Too long, not possible. We do not support IPv4-mapped IPv6 addresses goto error; } // First go forward the string, until end, noting :: position if any // We're decrementing `len` as we go forward, and stop when it reaches 0 for (field_no = 0, p = ip6addr; len && *p; p = q + 1) { for (q = p; len && *q && (*q != ':'); len -= 1) { // Seek for ':' or end if (!is_hex(*q++)) { // There must only be hex characters besides ':' goto error; } } if ((q - p) > 4) { // We can't have more than 4 hex digits per segment goto error; } if (field_no == 8) { // If the address goes farther than 8 segments goto error; } // Convert and write this part, (high-endian AKA network byte order) addr = common_write_16_bit(hex(p), addr); field_no++; // We handle the colons if (len) { // Check if we reached "::" if (q[0] == ':' && q[1] == ':') { if (coloncolon != -1) { // We are not supposed to see "::" more than once per address goto error; } coloncolon = field_no; q++; len -= 2; } else { len -= 1; } } } if (coloncolon != -1) { /* Insert zeros in the appropriate place */ uint_fast8_t head_size = 2 * coloncolon; uint_fast8_t inserted_size = 2 * (8 - field_no); uint_fast8_t tail_size = 16 - head_size - inserted_size; addr = dest; memmove(addr + head_size + inserted_size, addr + head_size, tail_size); memset(addr + head_size, 0, inserted_size); } else if (field_no != 8) { // Report an error if we didn't get 8 fields goto error; } return true; error: // Fill the output buffer with 0 so we stick to the old failure behavior. // We are however more agressive and wipe the entire address, and do so more often. memset(dest, 0, 16); return false; } unsigned char sipv6_prefixlength(const char *ip6addr) { char *ptr = strchr(ip6addr, '/'); if (ptr) { return (unsigned char)strtoul(ptr + 1, 0, 10); } return 0; } int stoip6_prefix(const char *ip6addr, void *dest, int_fast16_t *prefix_len_out) { size_t addr_len, total_len; int_fast16_t prefix_length; if (prefix_len_out) { *prefix_len_out = -1; } total_len = addr_len = strlen(ip6addr); const char *ptr = strchr(ip6addr, '/'); if (ptr) { addr_len = ptr - ip6addr; if (prefix_len_out) { if (total_len - addr_len > 3) { /* too many digits in prefix */ return -1; } prefix_length = strtoul(ptr + 1, 0, 10); if (prefix_length < 0 || prefix_length > 128) { /* prefix value illegal */ return -1; } *prefix_len_out = prefix_length; } } if (!stoip6(ip6addr, addr_len, dest)) { /* parser failure */ return -1; } return 0; } static bool is_hex(char c) { // 'A' (0x41) and 'a' (0x61) are mapped in the ASCII table in such a way that masking the 0x20 bit turn 'a' in 'A' if ((c & ~0x20) >= 'A' && (c & ~0x20) <= 'F') { return true; } if (c >= '0' && c <= '9') { return true; } return false; } static uint16_t hex(const char *p) { uint16_t val = 0; for (;;) { char c = *p++; if ((c >= '0') && (c <= '9')) { val = (val << 4) | (c - '0'); } else if ((c >= 'A') && (c <= 'F')) { val = (val << 4) | (10 + (c - 'A')); } else if ((c >= 'a') && (c <= 'f')) { val = (val << 4) | (10 + (c - 'a')); } else { break; // Non hex character } } return val; } #endif