Modified Motor Driver Firmware to include Flash + Thermal
Dependencies: FastPWM3 mbed-dev-STM-lean
Diff: Calibration/calibration.cpp
- Revision:
- 46:2d4b1dafcfe3
- Parent:
- 45:26801179208e
- Child:
- 47:e1196a851f76
--- a/Calibration/calibration.cpp Wed Jun 27 03:44:44 2018 +0000 +++ b/Calibration/calibration.cpp Thu Jul 12 02:50:34 2018 +0000 @@ -75,17 +75,30 @@ /// Measures the electrical angle offset of the position sensor /// and (in the future) corrects nonlinearity due to position sensor eccentricity printf("Starting calibration procedure\n\r"); + float * error_f; + float * error_b; + int * lut; + int * raw_f; + int * raw_b; + float * error; + float * error_filt; const int n = 128*NPP; // number of positions to be sampled per mechanical rotation. Multiple of NPP for filtering reasons (see later) const int n2 = 50; // increments between saved samples (for smoothing motion) float delta = 2*PI*NPP/(n*n2); // change in angle between samples - float error_f[n] = {0}; // error vector rotating forwards - float error_b[n] = {0}; // error vector rotating backwards + error_f = new float[n](); // error vector rotating forwards + error_b = new float[n](); // error vector rotating backwards const int n_lut = 128; - int lut[n_lut]= {0}; // clear any old lookup table before starting. + lut = new int[n_lut](); // clear any old lookup table before starting. + + error = new float[n](); + const int window = 128; + error_filt = new float[n](); + float cogging_current[window] = {0}; + ps->WriteLUT(lut); - int raw_f[n] = {0}; - int raw_b[n] = {0}; + raw_f = new int[n](); + raw_b = new int[n](); float theta_ref = 0; float theta_actual = 0; float v_d = .05f; // Put volts on the D-Axis @@ -182,10 +195,7 @@ /// This filter has zero gain at electrical frequency and all integer multiples /// So cogging effects should be completely filtered out. - float error[n] = {0}; - const int window = 128; - float error_filt[n] = {0}; - float cogging_current[window] = {0}; + float mean = 0; for (int i = 0; i<n; i++){ //Average the forward and back directions error[i] = 0.5f*(error_f[i] + error_b[n-i-1]); @@ -209,14 +219,14 @@ printf("\n\r Encoder non-linearity compensation table\n\r"); - printf(" Sample Number : Lookup Index : Lookup Value : Cogging Current Lookup\n\r\n\r"); + printf(" Sample Number : Lookup Index : Lookup Value\n\r\n\r"); for (int i = 0; i<n_lut; i++){ // build lookup table int ind = (raw_offset>>7) + i; if(ind > (n_lut-1)){ ind -= n_lut; } lut[ind] = (int) ((error_filt[i*NPP] - mean)*(float)(ps->GetCPR())/(2.0f*PI)); - printf("%d %d %d %f\n\r", i, ind, lut[ind], cogging_current[i]); + printf("%d %d %d \n\r", i, ind, lut[ind]); wait(.001); } @@ -228,6 +238,11 @@ if (!prefs->ready()) prefs->open(); prefs->flush(); // write offset and lookup table to flash prefs->close(); - + + delete[] error_f; //gotta free up that ram + delete[] error_b; + delete[] lut; + delete[] raw_f; + delete[] raw_b; } \ No newline at end of file