Biomimetics MBED Library w/ Added Support for CAN3
Dependents: CAN_TEST SPIne_Plus_DYNO_SENSORS SPIne_Plus_v2 SPIne_Plus_Dyno_v2
Diff: cmsis/TARGET_CORTEX_A/TOOLCHAIN_ARM/cmsis_armcc.h
- Revision:
- 0:083111ae2a11
diff -r 000000000000 -r 083111ae2a11 cmsis/TARGET_CORTEX_A/TOOLCHAIN_ARM/cmsis_armcc.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/cmsis/TARGET_CORTEX_A/TOOLCHAIN_ARM/cmsis_armcc.h Thu Nov 26 04:08:56 2020 +0000 @@ -0,0 +1,673 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler specific macros, functions, instructions + * @version V1.00 + * @date 22. Feb 2017 + ******************************************************************************/ +/* + * Copyright (c) 2009-2017 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if (defined (__TARGET_ARCH_7_A ) && (__TARGET_ARCH_7_A == 1)) + #define __ARM_ARCH_7A__ 1 +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_ASM + #define __STATIC_ASM static __asm +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __UNALIGNED_UINT32 + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif + + +/* ########################### Core Function Access ########################### */ + +/** + \brief Get FPSCR + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + +/** + \brief Set FPSCR + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + +/* ########################## Core Instruction Access ######################### */ +/** + \brief No Operation + */ +#define __NOP __nop + +/** + \brief Wait For Interrupt + */ +#define __WFI __wfi + +/** + \brief Wait For Event + */ +#define __WFE __wfe + +/** + \brief Send Event + */ +#define __SEV __sev + +/** + \brief Instruction Synchronization Barrier + */ +#define __ISB() do {\ + __schedule_barrier();\ + __isb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Synchronization Barrier + */ +#define __DSB() do {\ + __schedule_barrier();\ + __dsb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Data Memory Barrier + */ +#define __DMB() do {\ + __schedule_barrier();\ + __dmb(0xF);\ + __schedule_barrier();\ + } while (0U) + +/** + \brief Reverse byte order (32 bit) + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + +/** + \brief Reverse byte order (16 bit) + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + +/** + \brief Reverse byte order in signed short value + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value) +{ + revsh r0, r0 + bx lr +} +#endif + +/** + \brief Rotate Right in unsigned value (32 bit) + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + +/** + \brief Breakpoint + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + +/** + \brief Reverse bit order of value + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __rbit + +/** + \brief Count leading zeros + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + +/** \brief Get CPSR Register + \return CPSR Register value + */ +__STATIC_INLINE uint32_t __get_CPSR(void) +{ + register uint32_t __regCPSR __ASM("cpsr"); + return(__regCPSR); +} + + +/** \brief Set CPSR Register + \param [in] cpsr CPSR value to set + */ +__STATIC_INLINE void __set_CPSR(uint32_t cpsr) +{ + register uint32_t __regCPSR __ASM("cpsr"); + __regCPSR = cpsr; +} + +/** \brief Get Mode + \return Processor Mode + */ +__STATIC_INLINE uint32_t __get_mode(void) { + return (__get_CPSR() & 0x1FU); +} + +/** \brief Set Mode + \param [in] mode Mode value to set + */ +__STATIC_INLINE __ASM void __set_mode(uint32_t mode) { + MOV r1, lr + MSR CPSR_C, r0 + BX r1 +} + +/** \brief Set Stack Pointer + \param [in] stack Stack Pointer value to set + */ +__STATIC_INLINE __ASM void __set_SP(uint32_t stack) +{ + MOV sp, r0 + BX lr +} + +/** \brief Set Process Stack Pointer + \param [in] topOfProcStack USR/SYS Stack Pointer value to set + */ +__STATIC_INLINE __ASM void __set_PSP(uint32_t topOfProcStack) +{ + ARM + PRESERVE8 + + BIC R0, R0, #7 ;ensure stack is 8-byte aligned + MRS R1, CPSR + CPS #0x1F ;no effect in USR mode + MOV SP, R0 + MSR CPSR_c, R1 ;no effect in USR mode + ISB + BX LR +} + +/** \brief Set User Mode + */ +__STATIC_INLINE __ASM void __set_CPS_USR(void) +{ + ARM + + CPS #0x10 + BX LR +} + +/** \brief Get FPEXC + \return Floating Point Exception Control register value + */ +__STATIC_INLINE uint32_t __get_FPEXC(void) +{ +#if (__FPU_PRESENT == 1) + register uint32_t __regfpexc __ASM("fpexc"); + return(__regfpexc); +#else + return(0); +#endif +} + +/** \brief Set FPEXC + \param [in] fpexc Floating Point Exception Control value to set + */ +__STATIC_INLINE void __set_FPEXC(uint32_t fpexc) +{ +#if (__FPU_PRESENT == 1) + register uint32_t __regfpexc __ASM("fpexc"); + __regfpexc = (fpexc); +#endif +} + +/** \brief Get CPACR + \return Coprocessor Access Control register value + */ +__STATIC_INLINE uint32_t __get_CPACR(void) +{ + register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2"); + return __regCPACR; +} + +/** \brief Set CPACR + \param [in] cpacr Coprocessor Acccess Control value to set + */ +__STATIC_INLINE void __set_CPACR(uint32_t cpacr) +{ + register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2"); + __regCPACR = cpacr; +} + +/** \brief Get CBAR + \return Configuration Base Address register value + */ +__STATIC_INLINE uint32_t __get_CBAR() { + register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0"); + return(__regCBAR); +} + +/** \brief Get TTBR0 + + This function returns the value of the Translation Table Base Register 0. + + \return Translation Table Base Register 0 value + */ +__STATIC_INLINE uint32_t __get_TTBR0() { + register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0"); + return(__regTTBR0); +} + +/** \brief Set TTBR0 + + This function assigns the given value to the Translation Table Base Register 0. + + \param [in] ttbr0 Translation Table Base Register 0 value to set + */ +__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) { + register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0"); + __regTTBR0 = ttbr0; +} + +/** \brief Get DACR + + This function returns the value of the Domain Access Control Register. + + \return Domain Access Control Register value + */ +__STATIC_INLINE uint32_t __get_DACR() { + register uint32_t __regDACR __ASM("cp15:0:c3:c0:0"); + return(__regDACR); +} + +/** \brief Set DACR + + This function assigns the given value to the Domain Access Control Register. + + \param [in] dacr Domain Access Control Register value to set + */ +__STATIC_INLINE void __set_DACR(uint32_t dacr) { + register uint32_t __regDACR __ASM("cp15:0:c3:c0:0"); + __regDACR = dacr; +} + +/** \brief Set SCTLR + + This function assigns the given value to the System Control Register. + + \param [in] sctlr System Control Register value to set + */ +__STATIC_INLINE void __set_SCTLR(uint32_t sctlr) +{ + register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0"); + __regSCTLR = sctlr; +} + +/** \brief Get SCTLR + \return System Control Register value + */ +__STATIC_INLINE uint32_t __get_SCTLR() { + register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0"); + return(__regSCTLR); +} + +/** \brief Set ACTRL + \param [in] actrl Auxiliary Control Register value to set + */ +__STATIC_INLINE void __set_ACTRL(uint32_t actrl) +{ + register uint32_t __regACTRL __ASM("cp15:0:c1:c0:1"); + __regACTRL = actrl; +} + +/** \brief Get ACTRL + \return Auxiliary Control Register value + */ +__STATIC_INLINE uint32_t __get_ACTRL(void) +{ + register uint32_t __regACTRL __ASM("cp15:0:c1:c0:1"); + return(__regACTRL); +} + +/** \brief Get MPIDR + + This function returns the value of the Multiprocessor Affinity Register. + + \return Multiprocessor Affinity Register value + */ +__STATIC_INLINE uint32_t __get_MPIDR(void) +{ + register uint32_t __regMPIDR __ASM("cp15:0:c0:c0:5"); + return(__regMPIDR); +} + + /** \brief Get VBAR + + This function returns the value of the Vector Base Address Register. + + \return Vector Base Address Register + */ +__STATIC_INLINE uint32_t __get_VBAR(void) +{ + register uint32_t __regVBAR __ASM("cp15:0:c12:c0:0"); + return(__regVBAR); +} + +/** \brief Set VBAR + + This function assigns the given value to the Vector Base Address Register. + + \param [in] vbar Vector Base Address Register value to set + */ +__STATIC_INLINE void __set_VBAR(uint32_t vbar) +{ + register uint32_t __regVBAR __ASM("cp15:0:c12:c0:0"); + __regVBAR = vbar; +} + +/** \brief Set CNTP_TVAL + + This function assigns the given value to PL1 Physical Timer Value Register (CNTP_TVAL). + + \param [in] value CNTP_TVAL Register value to set +*/ +__STATIC_INLINE void __set_CNTP_TVAL(uint32_t value) { + register uint32_t __regCNTP_TVAL __ASM("cp15:0:c14:c2:0"); + __regCNTP_TVAL = value; +} + +/** \brief Get CNTP_TVAL + + This function returns the value of the PL1 Physical Timer Value Register (CNTP_TVAL). + + \return CNTP_TVAL Register value + */ +__STATIC_INLINE uint32_t __get_CNTP_TVAL() { + register uint32_t __regCNTP_TVAL __ASM("cp15:0:c14:c2:0"); + return(__regCNTP_TVAL); +} + +/** \brief Set CNTP_CTL + + This function assigns the given value to PL1 Physical Timer Control Register (CNTP_CTL). + + \param [in] value CNTP_CTL Register value to set +*/ +__STATIC_INLINE void __set_CNTP_CTL(uint32_t value) { + register uint32_t __regCNTP_CTL __ASM("cp15:0:c14:c2:1"); + __regCNTP_CTL = value; +} + +/** \brief Set TLBIALL + + TLB Invalidate All + */ +__STATIC_INLINE void __set_TLBIALL(uint32_t value) { + register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0"); + __TLBIALL = value; +} + +/** \brief Set BPIALL. + + Branch Predictor Invalidate All + */ +__STATIC_INLINE void __set_BPIALL(uint32_t value) { + register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6"); + __BPIALL = value; +} + +/** \brief Set ICIALLU + + Instruction Cache Invalidate All + */ +__STATIC_INLINE void __set_ICIALLU(uint32_t value) { + register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0"); + __ICIALLU = value; +} + +/** \brief Set DCCMVAC + + Data cache clean + */ +__STATIC_INLINE void __set_DCCMVAC(uint32_t value) { + register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1"); + __DCCMVAC = value; +} + +/** \brief Set DCIMVAC + + Data cache invalidate + */ +__STATIC_INLINE void __set_DCIMVAC(uint32_t value) { + register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1"); + __DCIMVAC = value; +} + +/** \brief Set DCCIMVAC + + Data cache clean and invalidate + */ +__STATIC_INLINE void __set_DCCIMVAC(uint32_t value) { + register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1"); + __DCCIMVAC = value; +} + +/** \brief Clean and Invalidate the entire data or unified cache + + Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency + */ +#pragma push +#pragma arm +__STATIC_INLINE __ASM void __L1C_CleanInvalidateCache(uint32_t op) { + ARM + + PUSH {R4-R11} + + MRC p15, 1, R6, c0, c0, 1 // Read CLIDR + ANDS R3, R6, #0x07000000 // Extract coherency level + MOV R3, R3, LSR #23 // Total cache levels << 1 + BEQ Finished // If 0, no need to clean + + MOV R10, #0 // R10 holds current cache level << 1 +Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position + MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level + AND R1, R1, #7 // Isolate those lower 3 bits + CMP R1, #2 + BLT Skip // No cache or only instruction cache at this level + + MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register + ISB // ISB to sync the change to the CacheSizeID reg + MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register + AND R2, R1, #7 // Extract the line length field + ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes) + LDR R4, =0x3FF + ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned) + CLZ R5, R4 // R5 is the bit position of the way size increment + LDR R7, =0x7FFF + ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned) + +Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned) + +Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11 + ORR R11, R11, R7, LSL R2 // Factor in the Set number + CMP R0, #0 + BNE Dccsw + MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way + B cont +Dccsw CMP R0, #1 + BNE Dccisw + MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way + B cont +Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW. Clean and Invalidate by Set/Way +cont SUBS R9, R9, #1 // Decrement the Way number + BGE Loop3 + SUBS R7, R7, #1 // Decrement the Set number + BGE Loop2 +Skip ADD R10, R10, #2 // Increment the cache number + CMP R3, R10 + BGT Loop1 + +Finished + DSB + POP {R4-R11} + BX lr +} +#pragma pop + +/** \brief Enable Floating Point Unit + + Critical section, called from undef handler, so systick is disabled + */ +#pragma push +#pragma arm +__STATIC_INLINE __ASM void __FPU_Enable(void) { + ARM + + //Permit access to VFP/NEON, registers by modifying CPACR + MRC p15,0,R1,c1,c0,2 + ORR R1,R1,#0x00F00000 + MCR p15,0,R1,c1,c0,2 + + //Ensure that subsequent instructions occur in the context of VFP/NEON access permitted + ISB + + //Enable VFP/NEON + VMRS R1,FPEXC + ORR R1,R1,#0x40000000 + VMSR FPEXC,R1 + + //Initialise VFP/NEON registers to 0 + MOV R2,#0 + IF {TARGET_FEATURE_EXTENSION_REGISTER_COUNT} >= 16 + //Initialise D16 registers to 0 + VMOV D0, R2,R2 + VMOV D1, R2,R2 + VMOV D2, R2,R2 + VMOV D3, R2,R2 + VMOV D4, R2,R2 + VMOV D5, R2,R2 + VMOV D6, R2,R2 + VMOV D7, R2,R2 + VMOV D8, R2,R2 + VMOV D9, R2,R2 + VMOV D10,R2,R2 + VMOV D11,R2,R2 + VMOV D12,R2,R2 + VMOV D13,R2,R2 + VMOV D14,R2,R2 + VMOV D15,R2,R2 + ENDIF + IF {TARGET_FEATURE_EXTENSION_REGISTER_COUNT} == 32 + //Initialise D32 registers to 0 + VMOV D16,R2,R2 + VMOV D17,R2,R2 + VMOV D18,R2,R2 + VMOV D19,R2,R2 + VMOV D20,R2,R2 + VMOV D21,R2,R2 + VMOV D22,R2,R2 + VMOV D23,R2,R2 + VMOV D24,R2,R2 + VMOV D25,R2,R2 + VMOV D26,R2,R2 + VMOV D27,R2,R2 + VMOV D28,R2,R2 + VMOV D29,R2,R2 + VMOV D30,R2,R2 + VMOV D31,R2,R2 + ENDIF + + //Initialise FPSCR to a known state + VMRS R2,FPSCR + LDR R3,=0x00086060 //Mask off all bits that do not have to be preserved. Non-preserved bits can/should be zero. + AND R2,R2,R3 + VMSR FPSCR,R2 + + BX LR +} +#pragma pop + +#endif /* __CMSIS_ARMCC_H */