Updated for the next revision of the motor board
MotorShield.cpp
- Committer:
- elijahsj
- Date:
- 2020-08-26
- Revision:
- 7:e3a2ade56b79
- Parent:
- 5:d2dffc88e94d
- Child:
- 8:e8985e8e9146
File content as of revision 7:e3a2ade56b79:
/* Library to interface with 2.74 Motor Shield ** Uses low level HAL libraries to enable high speed PWM ** Use as follows: ** - Create shield object and specify PWM period for the motors ** - Set the duty cycle and direction for each motor */ #include "mbed.h" #include "MotorShield.h" #include "HardwareSetup.h" MotorShield::MotorShield(int periodTicks) { periodTickVal = periodTicks; init(); } void MotorShield::init() { /** Initial config for the STM32H743 **/ initHardware(periodTickVal); // Setup PWM wait_us(100); } void MotorShield::motorAWrite(float duty_cycle, int direction) { int tick = (int)(periodTickVal * duty_cycle); if (direction){ TIM15->CCR2 = tick; TIM15->CCR1 = 0; } else { TIM15->CCR2 = 0; TIM15->CCR1 = tick; } } void MotorShield::motorBWrite(float duty_cycle, int direction) { int tick = (int)(periodTickVal * duty_cycle); if (direction){ TIM12->CCR2 = tick; TIM12->CCR1 = 0; } else { TIM12->CCR2 = 0; TIM12->CCR1 = tick; } } void MotorShield::motorCWrite(float duty_cycle, int direction) { int tick = (int)(periodTickVal * duty_cycle); if (direction){ TIM13->CCR1 = 0; TIM14->CCR1 = tick; } else { TIM13->CCR1 = tick; TIM14->CCR1 = 0; } } void MotorShield::motorDWrite(float duty_cycle, int direction) { int tick = (int)(periodTickVal * duty_cycle); if (direction){ TIM16->CCR1 = tick; TIM17->CCR1 = 0; } else { TIM16->CCR1 = 0; TIM17->CCR1 = tick; } } uint32_t MotorShield::readCurrentA() { return readADC1(0); } uint32_t MotorShield::readCurrentB() { return readADC1(1); } uint32_t MotorShield::readCurrentC() { return readADC2(1); } uint32_t MotorShield::readCurrentD() { return readADC2(0); } void MotorShield::changePeriod(int periodTicks){ periodTickVal = periodTicks; init(); }