![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
1223
Dependencies: BufferedSerial SoftPWM mbed send
Fork of nRF24L01P_Hello_World by
Diff: main.cpp
- Revision:
- 4:876bfa91934c
- Parent:
- 3:61afd8d17063
--- a/main.cpp Wed Oct 11 06:29:40 2017 +0000 +++ b/main.cpp Wed Nov 08 06:24:17 2017 +0000 @@ -1,78 +1,100 @@ #include "mbed.h" #include "nRF24L01P.h" - -Serial pc(USBTX, USBRX, 115200); // tx, rx +#include "SoftPWM.h" +#define JY901transfersize 11 +#define TRANSFER_SIZE 11 +#include"JY901.h" +#define pwm_period 1 +int flagg = 0; -// mosi, miso, sck, csn, ce, irq -nRF24L01P my_nrf24l01p(D4, D5, D3, D7, D8, D6); - -DigitalOut myled1(LED1); -DigitalOut myled2(LED2); +char targetdata[3]; +char receivedata[4]; +float change[4]; +int receivedatacnt = 0; +SoftPWM PWM1(PA_2),PWM2(PA_3),PWM3(PA_6),PWM4(PA_7),PWM5(PB_0),PWM6(PB_1); -int main() { - - pc.printf("init\r\n"); +int rollx=0,rolly=0,rollz=0,drx,dry,drz,ax,ay,az; +float kp,ki,kd; +void pwm_init() +{ + PWM1.period_ms(pwm_period); + PWM2.period_ms(pwm_period); + PWM3.period_ms(pwm_period); + PWM4.period_ms(pwm_period); + PWM5.period_ms(pwm_period); + PWM6.period_ms(pwm_period); + PWM1=0.0;PWM2=0.0;PWM3=0.0;PWM4=0.0;PWM5=0.0;PWM6=0.0; +} -// The nRF24L01+ supports transfers from 1 to 32 bytes, but Sparkfun's -// "Nordic Serial Interface Board" (http://www.sparkfun.com/products/9019) -// only handles 4 byte transfers in the ATMega code. -#define TRANSFER_SIZE 4 - - char txData[TRANSFER_SIZE], rxData[TRANSFER_SIZE]; +JY901 _JY901(PA_9,PA_10); +//nRF24L01P my_nrf24l01p(PB_15, PB_14, PB_13, PC_1, PC_2, PC_0); +char txData[TRANSFER_SIZE], rxData[TRANSFER_SIZE]; + int JY901cnt = 0; int txDataCnt = 0; int rxDataCnt = 0; - - my_nrf24l01p.powerUp(); - - // Display the (default) setup of the nRF24L01+ chip - pc.printf( "nRF24L01+ Frequency : %d MHz\r\n", my_nrf24l01p.getRfFrequency() ); - pc.printf( "nRF24L01+ Output power : %d dBm\r\n", my_nrf24l01p.getRfOutputPower() ); - pc.printf( "nRF24L01+ Data Rate : %d kbps\r\n", my_nrf24l01p.getAirDataRate() ); - pc.printf( "nRF24L01+ TX Address : 0x%010llX\r\n", my_nrf24l01p.getTxAddress() ); - pc.printf( "nRF24L01+ RX Address : 0x%010llX\r\n", my_nrf24l01p.getRxAddress() ); - - pc.printf( "Type keys to test transfers:\r\n (transfers are grouped into %d characters)\r\n", TRANSFER_SIZE ); - - my_nrf24l01p.setTransferSize( TRANSFER_SIZE ); +void transferdata(){ + _JY901.receiveData(); + float acc[3]; + _JY901.getAttitude(acc[0], acc[1], acc[2]); + PWM1=0.2;//0.13+0.13*(float)rollx/32767.0; + PWM2=0.4;//0.13-0.13*(float)rolly/32767.0; + PWM3=0.1-0.1*acc[0]/180; +} - my_nrf24l01p.setReceiveMode(); - my_nrf24l01p.enable(); - - while (1) { - - // If we've received anything over the host serial link... - if ( pc.readable() ) { - - // ...add it to the transmit buffer - txData[txDataCnt++] = pc.getc(); - - // If the transmit buffer is full - if ( txDataCnt >= sizeof( txData ) ) { +int PIDcontrol(char *targetdata,char *data,float *change){ + return 1; +} - // Send the transmitbuffer via the nRF24L01+ - my_nrf24l01p.write( NRF24L01P_PIPE_P0, txData, txDataCnt ); - - txDataCnt = 0; - } - - // Toggle LED1 (to help debug Host -> nRF24L01+ communication) - myled1 = !myled1; - } - - // If we've received anything in the nRF24L01+... - if ( my_nrf24l01p.readable() ) { +void update_roll() +{ + // char *s; + /*char data[JY901transfersize]; + char flag =0,flag2 = 0; + int q=1; + while(q < 1000){ + q++; + switch(flag){ + case 0: + flag2=JY901.getc(); + if(flag2==0x55) flag++; + break; + case 1: + flag2=JY901.getc(); + if(flag2 == 0x53){ + flag++; + data[0] = 0x55; + data[1] = flag2; + } + else flag--; + break; + case 2: + for(int i = 2;i != JY901transfersize;i++) + data[i] = JY901.getc(); + q = 1001; + break; + } + }*/ - // ...read the data into the receive buffer - rxDataCnt = my_nrf24l01p.read( NRF24L01P_PIPE_P0, rxData, sizeof( rxData ) ); - - // Display the receive buffer contents via the host serial link - for ( int i = 0; rxDataCnt > 0; rxDataCnt--, i++ ) { + // rollx+=drx; + // rolly+=dry; + //rollz+=drz; + // sprintf(s,"%f",rollx*180/32767); + // my_nrf24l01p.write( NRF24L01P_PIPE_P0,s,11); +} +int main() { + // my_nrf24l01p.powerUp(); + // my_nrf24l01p.setTransferSize( 11); + // my_nrf24l01p.setReceiveMode(); + // my_nrf24l01p.enable(); - pc.putc( rxData[i] ); - } + Ticker time; + time.attach(&transferdata,0.1); + while(1){ + + // pc.printf("succes"); + + + } + +} - // Toggle LED2 (to help debug nRF24L01+ -> Host communication) - myled2 = !myled2; - } - } -}