![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
SHT21 CODE WITH TIMER and interruption
Fork of SHT21_ncleee by
SHT21_ncleee.h
- Committer:
- abdelah
- Date:
- 2018-01-24
- Revision:
- 4:2daacfab92a8
- Parent:
- 3:03bbabb7b0b0
File content as of revision 4:2daacfab92a8:
/* Copyright (c) 2012 Graeme Coapes, Newcastle University, MIT License * * Permission is hereby granted, free of charge, to any person obtaining a copy of this software * and associated documentation files (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, publish, distribute, * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all copies or * substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include "mbed.h" #ifndef SHT21_ncleee #define SHT21_ncleee /* * Constants used in communication * * Refer to datasheet for full explanation */ //Sensor I2C address #define SHT_I2C_ADDR 0x80 //Commands... //Trigger Temp with hold master #define SHT_TRIG_TEMP_HOLD 0xE3 //Trigger RH with hold master #define SHT_TRIG_RH_HOLD 0xE5 //Trigger Temp with no hold master #define SHT_TRIG_TEMP 0xF3 //Trigger RH with no hold master #define SHT_TRIG_RH 0xF5 //Write to user register #define SHT_WRITE_REG 0xE6 //Read from user register #define SHT_READ_REG 0xE7 //Soft reset the sensor #define SHT_SOFT_RESET 0xFE //User Register information //Data precision settings //RH 12 T 14 - default #define SHT_PREC_1214 0x00 //RH 8 T 10 #define SHT_PREC_0812 0x01 //RH 10 T 13 #define SHT_PREC_1013 0x80 //RH 11 T 11 #define SHT_PREC_1111 0x81 //Battery status #define SHT_BATTERY_STAT 0x40 //Enable on chip heater #define SHT_HEATER 0x04 //Disable OTP reload #define SHT_DISABLE_OTP 0x02 //Fail conditions on the I2C bus #define SHT_FAIL 1 #define SHT_SUCCESS 0 //Author fail conditions //1, 2, 3 can be used because these are status bits //in the received measurement value #define SHT_GOOD 0xFFFC #define SHT_TRIG_FAIL 1 #define SHT_READ_FAIL 2 /** SHT21 Connection class, utilizing a I2C interface * * Example: * @code * #include "mbed.h" * #include "SHT21_ncleee.h" * * * DigitalOut myled(LED1); * Serial pc(USBTX, USBRX); * I2C i2c(p28,p27); * SHT21 sht(&i2c); * * int main() * { * * pc.printf("Hello World...\n\tTesting temperature Sensor\n"); * * int temperature = sht.readTemp(); * * pc.printf("Temperature is: %d \n", temperature); * * pc.printf("Experiment complete...\n"); * * } * * @endcode * * */ class SHT21 { private: I2C *_i2c; // Serial *_pc; int triggerTemp(); int requestTemp(); unsigned short temperature; int triggerRH(); int requestRH(); unsigned short humidity; int wr(int cmd); public: /** Constructor - create a connection to a SHT21 temperature and humidity sensor * through an I2C interface * * @param *i2c a pointer to the i2c interface that is used for communication */ SHT21(I2C *i2c); /** Read the temperature value from the sensor \n * * Involves triggering the measuring unit then * waiting for 100ms for the measuring to complete * before reading the temperature * * @param returns a value representing the temperature in degrees centigrade */ float readTemp(); /** Read the humidity value from the sensor \n * * Involves triggering the measuring unit then * waiting for 100ms for the measuring to complete * before reading the humidity * * @param returns the percentage humidity */ float readHumidity(); /** * Perform a soft-reset of the sensor unit. */ int reset(); /** * Set the precision of the measuring * * //Data precision settings \n * //RH 12 T 14 - default \n * #define SHT_PREC_1214 0x00 \n * //RH 8 T 10 \n * #define SHT_PREC_0812 0x01 \n * //RH 10 T 13 \n * #define SHT_PREC_1013 0x80 \n * //RH 11 T 11 \n * #define SHT_PREC_1111 0x81 \n * * @param precision - the precision, refer to above or datasheet. * */ int setPrecision(char precision); }; #endif