USB Serial application
Fork of USBSerial_HelloWorld by
Diff: mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/ticker.h
- Revision:
- 10:41552d038a69
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/ticker.h Tue Jan 10 20:42:26 2017 +0000 @@ -0,0 +1,85 @@ +/** + ****************************************************************************** + * @file ticker.h + * @brief Microcontroller uSec ticker + * @internal + * @author ON Semiconductor. + * $Rev: + * $Date: + ****************************************************************************** + * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor). + * All rights reserved. This software and/or documentation is licensed by ON Semiconductor + * under limited terms and conditions. The terms and conditions pertaining to the software + * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf + * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and + * if applicable the software license agreement. Do not use this software and/or + * documentation unless you have carefully read and you agree to the limited terms and + * conditions. By using this software and/or documentation, you agree to the limited + * terms and conditions. + * + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, + * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * @endinternal + * + * + */ + +#ifndef TICKER_H_ +#define TICKER_H_ + +#include "types.h" + +/** Core frequency definitions. / + * + * These definitions should be adjusted to setup Orion core frequencies. + */ +#define CPU_CLOCK_ROOT_HZ ( ( unsigned long ) 32000000) /**< <b> Orion 32MHz root frequency </b> */ +#define CPU_CLOCK_DIV_32M ( 1 ) /**< <b> Divider to set up core frequency at 32MHz </b> */ +#define CPU_CLOCK_DIV_16M ( 2 ) /**< <b> Divider to set up core frequency at 16MHz </b> */ +#define CPU_CLOCK_DIV_8M ( 4 ) /**< <b> Divider to set up core frequency at 8MHz </b> */ +#define CPU_CLOCK_DIV_4M ( 8 ) /**< <b> Divider to set up core frequency at 4MHz </b> */ + +#define CPU_CLOCK_DIV CPU_CLOCK_DIV_32M /**< <b> Selected divider to be used by application code </b> */ + +#define configCPU_CLOCK_HZ ( ( unsigned long ) (CPU_CLOCK_ROOT_HZ/CPU_CLOCK_DIV) ) +#define configTICK_RATE_HZ ( ( unsigned long ) 1000000 ) // 1uSec ticker rate + + +/* Lowest priority */ + +#define configKERNEL_INTERRUPT_PRIORITY ( 0xFF ) +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 0x8F ) + +#define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ + +/* Constants required to manipulate the core. Registers first... */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile unsigned long * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile unsigned long * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile unsigned long * ) 0xe000e018 ) ) +#define portNVIC_INT_CTRL_REG ( * ( ( volatile unsigned long * ) 0xe000ed04 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile unsigned long * ) 0xe000ed20 ) ) + +/* ...then bits in the registers. */ +#define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL ) +#define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL ) +#define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL ) +#define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL ) + +/* Orion has 4 interrupt priority bits + */ +#define portNVIC_SYSTICK_PRI ( ( ( unsigned long ) configKERNEL_INTERRUPT_PRIORITY ) << 24 ) + +/* API definitions */ +void fSysTickInit(void); + +void fSysTickHandler(void); + +uint32_t fSysTickRead(void); + +void fSysTickEnableInterrupt (void); + +void fSysTickDisableInterrupt (void); +#endif // TICKER_H_