File content as of revision 0:f7f1f0d76dd6:

// Copyright (c) Microsoft. All rights reserved.
// Licensed under the MIT license. See LICENSE file in the project root for full license information.

/** @file iothub_client_ll.h
*    @brief     APIs that allow a user (usually a device) to communicate
*             with an Azure IoTHub.
*
*    @details IoTHubDeviceClient_LL is a module that allows a user (usually a
*             device) to communicate with an Azure IoTHub. It can send events
*             and receive messages. At any given moment in time there can only
*             be at most 1 message callback function.
*
*             This API surface contains a set of APIs that allows the user to
*             interact with the lower layer portion of the IoTHubClient. These APIs
*             contain @c _LL_ in their name, but retain the same functionality like the
*             @c IoTHubDeviceClient_... APIs, with one difference. If the @c _LL_ APIs are
*             used then the user is responsible for scheduling when the actual work done
*             by the IoTHubClient happens (when the data is sent/received on/from the wire).
*             This is useful for constrained devices where spinning a separate thread is
*             often not desired.
*/

#ifndef IOTHUB_DEVICE_CLIENT_LL_H
#define IOTHUB_DEVICE_CLIENT_LL_H

#include <stddef.h>
#include <stdint.h>

#include "azure_c_shared_utility/macro_utils.h"
#include "azure_c_shared_utility/umock_c_prod.h"

#include "iothub_transport_ll.h"
#include "iothub_client_core_ll.h"

#ifdef __cplusplus
extern "C"
{
#endif

typedef struct IOTHUB_CLIENT_CORE_LL_HANDLE_DATA_TAG* IOTHUB_DEVICE_CLIENT_LL_HANDLE;


    /**
    * @brief    Creates a IoT Hub client for communication with an existing
    *           IoT Hub using the specified connection string parameter.
    *
    * @param    connectionString    Pointer to a character string
    * @param    protocol            Function pointer for protocol implementation
    *
    *            Sample connection string:
    *                <blockquote>
    *                    <pre>HostName=[IoT Hub name goes here].[IoT Hub suffix goes here, e.g., private.azure-devices-int.net];DeviceId=[Device ID goes here];SharedAccessKey=[Device key goes here];</pre>
    *                </blockquote>
    *
    * @return    A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
    *             invoking other functions for IoT Hub client and @c NULL on failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_DEVICE_CLIENT_LL_HANDLE, IoTHubDeviceClient_LL_CreateFromConnectionString, const char*, connectionString, IOTHUB_CLIENT_TRANSPORT_PROVIDER, protocol);

    /**
    * @brief    Creates a IoT Hub client for communication with an existing IoT
    *           Hub using the specified parameters.
    *
    * @param    config    Pointer to an @c IOTHUB_CLIENT_CONFIG structure
    *
    *           The API does not allow sharing of a connection across multiple
    *           devices. This is a blocking call.
    *
    * @return    A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
    *            invoking other functions for IoT Hub client and @c NULL on failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_DEVICE_CLIENT_LL_HANDLE, IoTHubDeviceClient_LL_Create, const IOTHUB_CLIENT_CONFIG*, config);

    /**
    * @brief    Creates a IoT Hub client for communication with an existing IoT
    *           Hub using an existing transport.
    *
    * @param    config    Pointer to an @c IOTHUB_CLIENT_DEVICE_CONFIG structure
    *
    *           The API *allows* sharing of a connection across multiple
    *           devices. This is a blocking call.
    *
    * @return   A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
    *           invoking other functions for IoT Hub client and @c NULL on failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_DEVICE_CLIENT_LL_HANDLE, IoTHubDeviceClient_LL_CreateWithTransport, const IOTHUB_CLIENT_DEVICE_CONFIG*, config);

     /**
     * @brief    Creates a IoT Hub client for communication with an existing IoT
     *           Hub using the device auth module.
     *
     * @param    iothub_uri             Pointer to an ioThub hostname received in the registration process
     * @param    device_id              Pointer to the device Id of the device
     * @param    device_auth_handle     A device auth handle used to generate the connection string
     * @param    protocol               Function pointer for protocol implementation
     *
     * @return   A non-NULL @c IOTHUB_DEVICE_CLIENT_LL_HANDLE value that is used when
     *           invoking other functions for IoT Hub client and @c NULL on failure.
     */
     MOCKABLE_FUNCTION(, IOTHUB_DEVICE_CLIENT_LL_HANDLE, IoTHubDeviceClient_LL_CreateFromDeviceAuth, const char*, iothub_uri, const char*, device_id, IOTHUB_CLIENT_TRANSPORT_PROVIDER, protocol);

    /**
    * @brief    Disposes of resources allocated by the IoT Hub client. This is a
    *           blocking call.
    *
    * @param    iotHubClientHandle    The handle created by a call to the create function.
    */
     MOCKABLE_FUNCTION(, void, IoTHubDeviceClient_LL_Destroy, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle);

    /**
    * @brief    Asynchronous call to send the message specified by @p eventMessageHandle.
    *
    * @param    iotHubClientHandle              The handle created by a call to the create function.
    * @param    eventMessageHandle              The handle to an IoT Hub message.
    * @param    eventConfirmationCallback       The callback specified by the device for receiving
    *                                           confirmation of the delivery of the IoT Hub message.
    *                                           This callback can be expected to invoke the
    *                                           ::IoTHubDeviceClient_LL_SendEventAsync function for the
    *                                           same message in an attempt to retry sending a failing
    *                                           message. The user can specify a @c NULL value here to
    *                                           indicate that no callback is required.
    * @param    userContextCallback             User specified context that will be provided to the
    *                                           callback. This can be @c NULL.
    *
    *           @b NOTE: The application behavior is undefined if the user calls
    *           the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SendEventAsync, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_MESSAGE_HANDLE, eventMessageHandle, IOTHUB_CLIENT_EVENT_CONFIRMATION_CALLBACK, eventConfirmationCallback, void*, userContextCallback);

    /**
    * @brief    This function returns the current sending status for IoTHubClient.
    *
    * @param    iotHubClientHandle        The handle created by a call to the create function.
    * @param    iotHubClientStatus        The sending state is populated at the address pointed
    *                                     at by this parameter. The value will be set to
    *                                     @c IOTHUBCLIENT_SENDSTATUS_IDLE if there is currently
    *                                     no item to be sent and @c IOTHUBCLIENT_SENDSTATUS_BUSY
    *                                     if there are.
    *
    * @return    IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_GetSendStatus, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_STATUS*, iotHubClientStatus);

    /**
    * @brief    Sets up the message callback to be invoked when IoT Hub issues a
    *           message to the device. This is a blocking call.
    *
    * @param    iotHubClientHandle              The handle created by a call to the create function.
    * @param    messageCallback                 The callback specified by the device for receiving
    *                                           messages from IoT Hub.
    * @param    userContextCallback             User specified context that will be provided to the
    *                                           callback. This can be @c NULL.
    *
    *           @b NOTE: The application behavior is undefined if the user calls
    *           the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetMessageCallback, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_MESSAGE_CALLBACK_ASYNC, messageCallback, void*, userContextCallback);

    /**
    * @brief    Sets up the connection status callback to be invoked representing the status of
    * the connection to IOT Hub. This is a blocking call.
    *
    * @param    iotHubClientHandle              The handle created by a call to the create function.
    * @param    connectionStatusCallback        The callback specified by the device for receiving
    *                                           updates about the status of the connection to IoT Hub.
    * @param    userContextCallback             User specified context that will be provided to the
    *                                           callback. This can be @c NULL.
    *
    *           @b NOTE: The application behavior is undefined if the user calls
    *           the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetConnectionStatusCallback, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_CONNECTION_STATUS_CALLBACK, connectionStatusCallback, void*, userContextCallback);

    /**
    * @brief    Sets up the connection status callback to be invoked representing the status of
    * the connection to IOT Hub. This is a blocking call.
    *
    * @param    iotHubClientHandle              The handle created by a call to the create function.
    * @param    retryPolicy                     The policy to use to reconnect to IoT Hub when a
    *                                           connection drops.
    * @param    retryTimeoutLimitInSeconds      Maximum amount of time(seconds) to attempt reconnection when a
    *                                           connection drops to IOT Hub.
    *
    *           @b NOTE: The application behavior is undefined if the user calls
    *           the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetRetryPolicy, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_RETRY_POLICY, retryPolicy, size_t, retryTimeoutLimitInSeconds);


    /**
    * @brief    Sets up the connection status callback to be invoked representing the status of
    * the connection to IOT Hub. This is a blocking call.
    *
    * @param    iotHubClientHandle                  The handle created by a call to the create function.
    * @param    retryPolicy                         Out parameter containing the policy to use to reconnect to IoT Hub.
    * @param    retryTimeoutLimitInSeconds          Out parameter containing maximum amount of time in seconds to attempt reconnection
                                                    to IOT Hub.
    *
    *           @b NOTE: The application behavior is undefined if the user calls
    *           the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_GetRetryPolicy, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_RETRY_POLICY*, retryPolicy, size_t*, retryTimeoutLimitInSeconds);

    /**
    * @brief    This function returns in the out parameter @p lastMessageReceiveTime
    *           what was the value of the @c time function when the last message was
    *           received at the client.
    *
    * @param    iotHubClientHandle          The handle created by a call to the create function.
    * @param    lastMessageReceiveTime      Out parameter containing the value of @c time function
    *                                       when the last message was received.
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_GetLastMessageReceiveTime, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, time_t*, lastMessageReceiveTime);

    /**
    * @brief    This function is meant to be called by the user when work
    *           (sending/receiving) can be done by the IoTHubClient.
    *
    * @param    iotHubClientHandle    The handle created by a call to the create function.
    *
    *           All IoTHubClient interactions (in regards to network traffic
    *           and/or user level callbacks) are the effect of calling this
    *           function and they take place synchronously inside _DoWork.
    */
     MOCKABLE_FUNCTION(, void, IoTHubDeviceClient_LL_DoWork, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle);

    /**
    * @brief    This API sets a runtime option identified by parameter @p optionName
    *           to a value pointed to by @p value. @p optionName and the data type
    *           @p value is pointing to are specific for every option.
    *
    * @param    iotHubClientHandle      The handle created by a call to the create function.
    * @param    optionName              Name of the option.
    * @param    value                   The value.
    *
    *           The options that can be set via this API are:
    *                - @b timeout - the maximum time in milliseconds a communication is
    *                  allowed to use. @p value is a pointer to an @c unsigned @c int with
    *                  the timeout value in milliseconds. This is only supported for the HTTP
    *                  protocol as of now. When the HTTP protocol uses CURL, the meaning of
    *                  the parameter is <em>total request time</em>. When the HTTP protocol uses
    *                  winhttp, the meaning is the same as the @c dwSendTimeout and
    *                  @c dwReceiveTimeout parameters of the
    *                  <a href="https://msdn.microsoft.com/en-us/library/windows/desktop/aa384116(v=vs.85).aspx">
    *                  WinHttpSetTimeouts</a> API.
    *                - @b CURLOPT_LOW_SPEED_LIMIT - only available for HTTP protocol and only
    *                  when CURL is used. It has the same meaning as CURL's option with the same
    *                  name. @p value is pointer to a long.
    *                - @b CURLOPT_LOW_SPEED_TIME - only available for HTTP protocol and only
    *                  when CURL is used. It has the same meaning as CURL's option with the same
    *                  name. @p value is pointer to a long.
    *                - @b CURLOPT_FORBID_REUSE - only available for HTTP protocol and only
    *                  when CURL is used. It has the same meaning as CURL's option with the same
    *                  name. @p value is pointer to a long.
    *                - @b CURLOPT_FRESH_CONNECT - only available for HTTP protocol and only
    *                  when CURL is used. It has the same meaning as CURL's option with the same
    *                  name. @p value is pointer to a long.
    *                - @b CURLOPT_VERBOSE - only available for HTTP protocol and only
    *                  when CURL is used. It has the same meaning as CURL's option with the same
    *                  name. @p value is pointer to a long.
    *              - @b keepalive - available for MQTT protocol.  Integer value that sets the
    *                interval in seconds when pings are sent to the server.
    *              - @b logtrace - available for MQTT protocol.  Boolean value that turns on and
    *                off the diagnostic logging.
    *              - @b sas_token_lifetime - available for MQTT & AMQP protocol.  size_t value that that determines the
    *                sas token timeout length.
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetOption, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, const char*, optionName, const void*, value);

    /**
    * @brief   This API specifies a call back to be used when the device receives a desired state update.
    *
    * @param   iotHubClientHandle        The handle created by a call to the create function.
    * @param   deviceTwinCallback        The callback specified by the device client to be used for updating
    *                                    the desired state. The callback will be called in response to patch 
    *                                    request send by the IoTHub services. The payload will be passed to the
    *                                    callback, along with two version numbers:
    *                                        - Desired:
    *                                        - LastSeenReported:
    * @param   userContextCallback       User specified context that will be provided to the
    *                                    callback. This can be @c NULL.
    *
    *           @b NOTE: The application behavior is undefined if the user calls
    *           the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetDeviceTwinCallback, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_DEVICE_TWIN_CALLBACK, deviceTwinCallback, void*, userContextCallback);

    /**
    * @brief    This API sneds a report of the device's properties and their current values.
    *
    * @param    iotHubClientHandle        The handle created by a call to the create function.
    * @param    reportedState             The current device property values to be 'reported' to the IoTHub.
    * @param    reportedStateCallback     The callback specified by the device client to be called with the
    *                                     result of the transaction.
    * @param    userContextCallback       User specified context that will be provided to the
    *                                     callback. This can be @c NULL.
    *
    *            @b NOTE: The application behavior is undefined if the user calls
    *            the ::IoTHubDeviceClient_LL_Destroy function from within any callback.
    *
    * @return    IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SendReportedState, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, const unsigned char*, reportedState, size_t, size, IOTHUB_CLIENT_REPORTED_STATE_CALLBACK, reportedStateCallback, void*, userContextCallback);
     /**
     * @brief    This API sets callback for async cloud to device method call.
     *
     * @param    iotHubClientHandle                 The handle created by a call to the create function.
     * @param    inboundDeviceMethodCallback        The callback which will be called by IoTHub.
     * @param    userContextCallback                User specified context that will be provided to the
     *                                              callback. This can be @c NULL.
     *
     * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
     */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_SetDeviceMethodCallback, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, IOTHUB_CLIENT_DEVICE_METHOD_CALLBACK_ASYNC, deviceMethodCallback, void*, userContextCallback);

     /**
     * @brief    This API responses to a asnyc method callback identified the methodId.
     *
     * @param    iotHubClientHandle      The handle created by a call to the create function.
     * @param    methodId                The methodId of the Device Method callback.
     * @param    response                The response data for the method callback.
     * @param    response_size           The size of the response data buffer.
     * @param    status_response         The status response of the method callback.
     *
     * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
     */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_DeviceMethodResponse, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, METHOD_HANDLE, methodId, const unsigned char*, response, size_t, respSize, int, statusCode);

#ifndef DONT_USE_UPLOADTOBLOB
    /**
    * @brief    This API uploads to Azure Storage the content pointed to by @p source having the size @p size
    *           under the blob name devicename/@pdestinationFileName
    *
    * @param    iotHubClientHandle      The handle created by a call to the create function.
    * @param    destinationFileName     name of the file.
    * @param    source                  pointer to the source for file content (can be NULL)
    * @param    size                    the size of the source in memory (if @p source is NULL then size needs to be 0).
    *
    * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
    */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_UploadToBlob, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, const char*, destinationFileName, const unsigned char*, source, size_t, size);

     /**
     * @brief    This API uploads to Azure Storage the content provided block by block by @p getDataCallback
     *           under the blob name devicename/@pdestinationFileName
     *
     * @param    iotHubClientHandle      The handle created by a call to the create function.
     * @param    destinationFileName     name of the file.
     * @param    getDataCallbackEx       A callback to be invoked to acquire the file chunks to be uploaded, as well as to indicate the status of the upload of the previous block.
     * @param    context                 Any data provided by the user to serve as context on getDataCallback.
     *
     * @return   IOTHUB_CLIENT_OK upon success or an error code upon failure.
     */
     MOCKABLE_FUNCTION(, IOTHUB_CLIENT_RESULT, IoTHubDeviceClient_LL_UploadMultipleBlocksToBlob, IOTHUB_DEVICE_CLIENT_LL_HANDLE, iotHubClientHandle, const char*, destinationFileName, IOTHUB_CLIENT_FILE_UPLOAD_GET_DATA_CALLBACK_EX, getDataCallbackEx, void*, context);

#endif /*DONT_USE_UPLOADTOBLOB*/

#ifdef __cplusplus
}
#endif

#endif /* IOTHUB_DEVICE_CLIENT_LL_H */