Wiktor Kozak
sd
Fork of
TextLCD
by 
Wim Huiskamp
Diff: TextLCD_Config.h
- Revision:
- 40:d3496c3ea301
- Parent:
- 39:e9c2319de9c5
- Child:
- 41:111ca62e8a59
diff -r e9c2319de9c5 -r d3496c3ea301 TextLCD_Config.h --- a/TextLCD_Config.h Tue May 19 18:13:00 2015 +0000 +++ b/TextLCD_Config.h Wed May 20 18:46:51 2015 +0000 @@ -46,27 +46,27 @@ #define LCD_PRINTF 1 /* Enable Stream implementation */ #define LCD_ICON 1 /* Enable Icon implementation -2.0K codesize*/ #define LCD_ORIENT 1 /* Enable Orientation switch implementation -0.9K codesize*/ -#define LCD_BIGFONT 0 /* Enable Big Font implementation -0.6K codesize */ -#define LCD_INVERT 0 /* Enable display Invert implementation -0.5K codesize*/ -#define LCD_POWER 0 /* Enable Power control implementation -0.1K codesize*/ +#define LCD_BIGFONT 1 /* Enable Big Font implementation -0.6K codesize */ +#define LCD_INVERT 1 /* Enable display Invert implementation -0.5K codesize*/ +#define LCD_POWER 1 /* Enable Power control implementation -0.1K codesize*/ #define LCD_BLINK 1 /* Enable UDC and Icon Blink control implementation -0.8K codesize*/ -//Select option to activate default fonttable or alternatively use conversion for specific controller versions (eg PCF2119C, PCF2119R) -#define LCD_DEFAULT_FONT 0 +//Select option to activate default fonttable or alternatively use conversion for specific controller versions (eg PCF2116C, PCF2119R) +#define LCD_DEF_FONT 1 //Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces //Different commercially available LCD portexpanders use different wiring conventions. //LCD and serial portexpanders should be wired according to the tables below. // //Select Serial Port Expander Hardware module (one option only) -#define DEFAULT 0 +#define DEFAULT 1 #define ADAFRUIT 0 #define DFROBOT 0 #define LCM1602 0 #define YWROBOT 0 #define GYLCD 0 #define MJKDZ 0 -#define SYDZ 1 +#define SYDZ 0 #define WIDEHK 0 #define LCDPLUG 0