Wajahat Abbas / ublox-cellular-base

ublox-cellular-base

UbloxCellularBase.h@31:915ce07813da, 2019-08-28 (annotated)

Committer:
wajahat.abbas@u-blox.com
Date:
Wed Aug 28 16:42:48 2019 +0500
Revision:
31:915ce07813da
Parent:
30:38230504a646 
changes to init() as MNO profile can set parameters

Who changed what in which revision?

UserRevisionLine numberNew contents of line
fahimalavi 26:e4e444cc7b14 1 /* Copyright (c) 2019 ARM Limited
RobMeades 0:5cffef3371f6 2 *
RobMeades 0:5cffef3371f6 3 * Licensed under the Apache License, Version 2.0 (the "License");
RobMeades 0:5cffef3371f6 4 * you may not use this file except in compliance with the License.
RobMeades 0:5cffef3371f6 5 * You may obtain a copy of the License at
RobMeades 0:5cffef3371f6 6 *
RobMeades 0:5cffef3371f6 7 * http://www.apache.org/licenses/LICENSE-2.0
RobMeades 0:5cffef3371f6 8 *
RobMeades 0:5cffef3371f6 9 * Unless required by applicable law or agreed to in writing, software
RobMeades 0:5cffef3371f6 10 * distributed under the License is distributed on an "AS IS" BASIS,
RobMeades 0:5cffef3371f6 11 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
RobMeades 0:5cffef3371f6 12 * See the License for the specific language governing permissions and
RobMeades 0:5cffef3371f6 13 * limitations under the License.
RobMeades 0:5cffef3371f6 14 */
RobMeades 0:5cffef3371f6 15
rob.meades@u-blox.com 1:5aaecf2572dc 16 #ifndef _UBLOX_CELLULAR_BASE_
rob.meades@u-blox.com 1:5aaecf2572dc 17 #define _UBLOX_CELLULAR_BASE_
RobMeades 0:5cffef3371f6 18
RobMeades 0:5cffef3371f6 19 #include "mbed.h"
RobMeades 14:e420232ee4e7 20 #include "mbed_toolchain.h" // for MBED_DEPRECATED
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 21 #include "ubloxATCmdParser.h"
RobMeades 0:5cffef3371f6 22 #include "FileHandle.h"
RobMeades 0:5cffef3371f6 23
wajahat.abbas@u-blox.com 29:8a38f91009ad 24 #ifdef TARGET_UBLOX_C030_R410M
wajahat.abbas@u-blox.com 29:8a38f91009ad 25 #define MAX_NUM_PROFILES 12 //ref to enum MNOProfile
wajahat.abbas@u-blox.com 29:8a38f91009ad 26 #elif TARGET_UBLOX_C030_R412M
wajahat.abbas@u-blox.com 29:8a38f91009ad 27 #define MAX_NUM_PROFILES 7
wajahat.abbas@u-blox.com 29:8a38f91009ad 28 #endif
wajahat.abbas@u-blox.com 29:8a38f91009ad 29
RobMeades 0:5cffef3371f6 30 /**********************************************************************
RobMeades 0:5cffef3371f6 31 * CLASSES
RobMeades 0:5cffef3371f6 32 **********************************************************************/
RobMeades 0:5cffef3371f6 33
RobMeades 0:5cffef3371f6 34 /** UbloxCellularBase class.
RobMeades 0:5cffef3371f6 35 *
RobMeades 0:5cffef3371f6 36 * This class provides all the base support for generic u-blox modems
RobMeades 0:5cffef3371f6 37 * on C030 and C027 boards: module identification, power-up, network
RobMeades 0:5cffef3371f6 38 * registration, etc.
RobMeades 0:5cffef3371f6 39 */
RobMeades 0:5cffef3371f6 40 class UbloxCellularBase {
RobMeades 0:5cffef3371f6 41
RobMeades 0:5cffef3371f6 42 public:
RobMeades 0:5cffef3371f6 43 /** Circuit Switched network registration status (CREG Usage).
RobMeades 0:5cffef3371f6 44 * UBX-13001820 - AT Commands Example Application Note (Section 7.10.3).
RobMeades 0:5cffef3371f6 45 */
RobMeades 0:5cffef3371f6 46 typedef enum {
RobMeades 0:5cffef3371f6 47 CSD_NOT_REGISTERED_NOT_SEARCHING = 0,
RobMeades 0:5cffef3371f6 48 CSD_REGISTERED = 1,
RobMeades 0:5cffef3371f6 49 CSD_NOT_REGISTERED_SEARCHING = 2,
RobMeades 0:5cffef3371f6 50 CSD_REGISTRATION_DENIED = 3,
RobMeades 0:5cffef3371f6 51 CSD_UNKNOWN_COVERAGE = 4,
RobMeades 0:5cffef3371f6 52 CSD_REGISTERED_ROAMING = 5,
RobMeades 0:5cffef3371f6 53 CSD_SMS_ONLY = 6,
RobMeades 0:5cffef3371f6 54 CSD_SMS_ONLY_ROAMING = 7,
RobMeades 0:5cffef3371f6 55 CSD_CSFB_NOT_PREFERRED = 9
RobMeades 0:5cffef3371f6 56 } NetworkRegistrationStatusCsd;
RobMeades 0:5cffef3371f6 57
RobMeades 0:5cffef3371f6 58 /** Packet Switched network registration status (CGREG Usage).
RobMeades 0:5cffef3371f6 59 * UBX-13001820 - AT Commands Example Application Note (Section 18.27.3).
RobMeades 0:5cffef3371f6 60 */
RobMeades 0:5cffef3371f6 61 typedef enum {
RobMeades 0:5cffef3371f6 62 PSD_NOT_REGISTERED_NOT_SEARCHING = 0,
RobMeades 0:5cffef3371f6 63 PSD_REGISTERED = 1,
RobMeades 0:5cffef3371f6 64 PSD_NOT_REGISTERED_SEARCHING = 2,
RobMeades 0:5cffef3371f6 65 PSD_REGISTRATION_DENIED = 3,
RobMeades 0:5cffef3371f6 66 PSD_UNKNOWN_COVERAGE = 4,
RobMeades 0:5cffef3371f6 67 PSD_REGISTERED_ROAMING = 5,
RobMeades 0:5cffef3371f6 68 PSD_EMERGENCY_SERVICES_ONLY = 8
RobMeades 0:5cffef3371f6 69 } NetworkRegistrationStatusPsd;
RobMeades 0:5cffef3371f6 70
RobMeades 0:5cffef3371f6 71 /** EPS network registration status (CEREG Usage).
RobMeades 0:5cffef3371f6 72 * UBX-13001820 - AT Commands Example Application Note (Section 18.36.3).
RobMeades 0:5cffef3371f6 73 */
RobMeades 0:5cffef3371f6 74 typedef enum {
RobMeades 0:5cffef3371f6 75 EPS_NOT_REGISTERED_NOT_SEARCHING = 0,
RobMeades 0:5cffef3371f6 76 EPS_REGISTERED = 1,
RobMeades 0:5cffef3371f6 77 EPS_NOT_REGISTERED_SEARCHING = 2,
RobMeades 0:5cffef3371f6 78 EPS_REGISTRATION_DENIED = 3,
RobMeades 0:5cffef3371f6 79 EPS_UNKNOWN_COVERAGE = 4,
RobMeades 0:5cffef3371f6 80 EPS_REGISTERED_ROAMING = 5,
RobMeades 0:5cffef3371f6 81 EPS_EMERGENCY_SERVICES_ONLY = 8
RobMeades 0:5cffef3371f6 82 } NetworkRegistrationStatusEps;
RobMeades 0:5cffef3371f6 83
wajahat.abbas@u-blox.com 23:eaab8e812a5d 84 /** modem PSM states.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 85 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 86 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 87 typedef enum {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 88 AWAKE = 0,
wajahat.abbas@u-blox.com 23:eaab8e812a5d 89 ASLEEP = 1
wajahat.abbas@u-blox.com 23:eaab8e812a5d 90 } ModemPSMState;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 91
fahimalavi 26:e4e444cc7b14 92 /**
fahimalavi 26:e4e444cc7b14 93 * edrx access technology
fahimalavi 26:e4e444cc7b14 94 */
fahimalavi 26:e4e444cc7b14 95 typedef enum {
fahimalavi 26:e4e444cc7b14 96 EDRXGSM_EC_GSM_IoT_mode = 1,
fahimalavi 26:e4e444cc7b14 97 EDRXGSM_A_Gb_mode,
fahimalavi 26:e4e444cc7b14 98 EDRXUTRAN_Iu_mode,
fahimalavi 26:e4e444cc7b14 99 EDRXEUTRAN_WB_S1_mode,
fahimalavi 26:e4e444cc7b14 100 EDRXEUTRAN_NB_S1_mode
fahimalavi 26:e4e444cc7b14 101 }tEDRXAccessTechnology;
fahimalavi 26:e4e444cc7b14 102
fahimalavi 30:38230504a646 103 #ifdef TARGET_UBLOX_C030_R41XM
fahimalavi 30:38230504a646 104 /** Supported MNO profiles for SARA-R4.
fahimalavi 30:38230504a646 105 */
fahimalavi 30:38230504a646 106 typedef enum {
fahimalavi 30:38230504a646 107 SW_DEFAULT = 0,
fahimalavi 30:38230504a646 108 SIM_ICCID = 1,
fahimalavi 30:38230504a646 109 ATT = 2,
fahimalavi 30:38230504a646 110 TMO = 5,
fahimalavi 30:38230504a646 111 VODAFONE = 19,
fahimalavi 30:38230504a646 112 DT = 31,
fahimalavi 30:38230504a646 113 STANDARD_EU = 100
fahimalavi 30:38230504a646 114 #ifdef TARGET_UBLOX_C030_R410M
fahimalavi 30:38230504a646 115 , VERIZON = 3,
fahimalavi 30:38230504a646 116 TELSTRA = 4,
fahimalavi 30:38230504a646 117 CT = 6,
fahimalavi 30:38230504a646 118 SPRINT = 8,
fahimalavi 30:38230504a646 119 TELUS = 21
fahimalavi 30:38230504a646 120 #endif
fahimalavi 30:38230504a646 121 } MNOProfile;
fahimalavi 30:38230504a646 122
fahimalavi 30:38230504a646 123 typedef enum {
fahimalavi 30:38230504a646 124 UBANDMASK_RAT_LTE_CATM1 = 0,
fahimalavi 30:38230504a646 125 UBANDMASK_RAT_LTE_CATNB1 = 1
fahimalavi 30:38230504a646 126
fahimalavi 30:38230504a646 127 } UBandmaskRAT;
fahimalavi 30:38230504a646 128 #endif
fahimalavi 30:38230504a646 129
RobMeades 0:5cffef3371f6 130 /** Initialise the modem, ready for use.
RobMeades 0:5cffef3371f6 131 *
RobMeades 0:5cffef3371f6 132 * @param pin PIN for the SIM card.
RobMeades 0:5cffef3371f6 133 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 134 */
wajahat.abbas@u-blox.com 31:915ce07813da 135 bool init(const char *pin = 0, bool disable_mno_params = true);
RobMeades 0:5cffef3371f6 136
RobMeades 0:5cffef3371f6 137 /** Perform registration with the network.
RobMeades 0:5cffef3371f6 138 *
RobMeades 0:5cffef3371f6 139 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 140 */
RobMeades 0:5cffef3371f6 141 bool nwk_registration();
RobMeades 0:5cffef3371f6 142
RobMeades 0:5cffef3371f6 143 /** True if the modem is registered for circuit
RobMeades 0:5cffef3371f6 144 * switched data, otherwise false.
RobMeades 0:5cffef3371f6 145 */
RobMeades 0:5cffef3371f6 146 bool is_registered_csd();
RobMeades 0:5cffef3371f6 147
RobMeades 0:5cffef3371f6 148 /** True if the modem is registered for packet
RobMeades 0:5cffef3371f6 149 * switched data, otherwise false.
RobMeades 0:5cffef3371f6 150 */
RobMeades 0:5cffef3371f6 151 bool is_registered_psd();
RobMeades 0:5cffef3371f6 152
RobMeades 0:5cffef3371f6 153 /** True if the modem is registered for enhanced
RobMeades 0:5cffef3371f6 154 * packet switched data (i.e. LTE and beyond),
RobMeades 0:5cffef3371f6 155 * otherwise false.
RobMeades 0:5cffef3371f6 156 */
RobMeades 0:5cffef3371f6 157 bool is_registered_eps();
RobMeades 0:5cffef3371f6 158
RobMeades 0:5cffef3371f6 159 /** Perform deregistration from the network.
RobMeades 0:5cffef3371f6 160 *
RobMeades 0:5cffef3371f6 161 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 162 */
RobMeades 0:5cffef3371f6 163 bool nwk_deregistration();
RobMeades 0:5cffef3371f6 164
RobMeades 0:5cffef3371f6 165 /** Put the modem into its lowest power state.
RobMeades 0:5cffef3371f6 166 */
RobMeades 0:5cffef3371f6 167 void deinit();
RobMeades 0:5cffef3371f6 168
RobMeades 0:5cffef3371f6 169 /** Set the PIN code for the SIM card.
RobMeades 0:5cffef3371f6 170 *
RobMeades 0:5cffef3371f6 171 * @param pin PIN for the SIM card.
RobMeades 0:5cffef3371f6 172 */
RobMeades 0:5cffef3371f6 173 void set_pin(const char *pin);
RobMeades 0:5cffef3371f6 174
RobMeades 0:5cffef3371f6 175 /** Enable or disable SIM pin checking.
RobMeades 0:5cffef3371f6 176 *
RobMeades 0:5cffef3371f6 177 * @param enableNotDisable true if SIM PIN checking is to be enabled,
RobMeades 0:5cffef3371f6 178 * otherwise false.
RobMeades 0:5cffef3371f6 179 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 180 */
RobMeades 0:5cffef3371f6 181 bool sim_pin_check_enable(bool enableNotDisable);
RobMeades 0:5cffef3371f6 182
RobMeades 0:5cffef3371f6 183 /** Change the SIM pin.
RobMeades 0:5cffef3371f6 184 *
RobMeades 0:5cffef3371f6 185 * @param new_pin the new PIN to use.
RobMeades 0:5cffef3371f6 186 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 187 */
RobMeades 0:5cffef3371f6 188 bool change_sim_pin(const char *new_pin);
RobMeades 0:5cffef3371f6 189
fahim alavi 11:57f64bc518c0 190 /** Get the IMEI.
fahim alavi 11:57f64bc518c0 191 *
fahim alavi 11:57f64bc518c0 192 * @return true if successful, otherwise false.
fahim alavi 11:57f64bc518c0 193 */
RobMeades 14:e420232ee4e7 194 MBED_DEPRECATED("This method is now replaced by const char * imei(), please use that instead")
fahim alavi 12:aa3cbc3f88c5 195 bool get_imei(char *imei_to_send, int size);
fahim alavi 11:57f64bc518c0 196
RobMeades 14:e420232ee4e7 197 /** Get the IMEI of the module.
RobMeades 14:e420232ee4e7 198 *
RobMeades 14:e420232ee4e7 199 * @return a pointer to the IMEI as a null-terminated string.
RobMeades 14:e420232ee4e7 200 */
RobMeades 14:e420232ee4e7 201 const char *imei();
RobMeades 14:e420232ee4e7 202
RobMeades 14:e420232ee4e7 203 /** Get the Mobile Equipment ID (which may be the same as the IMEI).
RobMeades 14:e420232ee4e7 204 *
RobMeades 14:e420232ee4e7 205 * @return a pointer to the Mobile Equipment ID as a null-terminated string.
RobMeades 14:e420232ee4e7 206 */
RobMeades 14:e420232ee4e7 207 const char *meid();
RobMeades 14:e420232ee4e7 208
RobMeades 14:e420232ee4e7 209 /** Get the IMSI of the SIM.
RobMeades 14:e420232ee4e7 210 *
RobMeades 14:e420232ee4e7 211 * @return a pointer to the IMSI as a null-terminated string.
RobMeades 14:e420232ee4e7 212 */
RobMeades 14:e420232ee4e7 213 const char *imsi();
RobMeades 14:e420232ee4e7 214
RobMeades 14:e420232ee4e7 215 /** Get the ICCID of the SIM.
RobMeades 14:e420232ee4e7 216 *
RobMeades 14:e420232ee4e7 217 * @return a pointer to the ICCID as a null-terminated string.
RobMeades 14:e420232ee4e7 218 */
RobMeades 14:e420232ee4e7 219 const char *iccid();
RobMeades 14:e420232ee4e7 220
RobMeades 14:e420232ee4e7 221 /** Get the RSSI.
RobMeades 14:e420232ee4e7 222 *
RobMeades 14:e420232ee4e7 223 * @return the RSSI in dBm. If it is not possible to obtain an
RobMeades 14:e420232ee4e7 224 * RSSI reading at the time (e.g. because the modem is in
RobMeades 14:e420232ee4e7 225 * data mode rather than AT command mode) then 0 is returned.
RobMeades 14:e420232ee4e7 226 */
RobMeades 14:e420232ee4e7 227 int rssi();
RobMeades 14:e420232ee4e7 228
wajahat.abbas@u-blox.com 20:31d5e048fbfa 229 /** RAT values for +URAT command
wajahat.abbas@u-blox.com 20:31d5e048fbfa 230 * R412M only supports value 7 (CatM1), 8 (NB1), and 9 (GPRS)
wajahat.abbas@u-blox.com 20:31d5e048fbfa 231 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 232 typedef enum {
wajahat.abbas@u-blox.com 20:31d5e048fbfa 233 GSM_GPRS_EGPRS = 0,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 234 GSM_UMTS = 1,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 235 UMTS = 2,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 236 URAT_LTE = 3,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 237 GSM_UMTS_LTE = 4,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 238 GSM_LTE = 5,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 239 UMTS_LTE = 6,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 240 LTE_CATM1 = 7,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 241 LTE_CATNB1 = 8,
wajahat.abbas@u-blox.com 20:31d5e048fbfa 242 GPRS_EGPRS = 9,
wajahat.abbas@u-blox.com 22:779971811c46 243 NOT_USED = -1
wajahat.abbas@u-blox.com 20:31d5e048fbfa 244 } RAT;
wajahat.abbas@u-blox.com 20:31d5e048fbfa 245
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 246 /** Module functionality modes. Ref to section 5.3.3 of UBX-13002752 for details.
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 247 */
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 248 typedef enum {
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 249 FUNC_MIN = 0,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 250 FUNC_FULL = 1,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 251 FUNC_AIRPLANE = 4,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 252 FUNC_EN_SIM_TLKT_DEDICATED = 6,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 253 FUNC_DS_SIM_TLKT = 7,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 254 FUNC_EN_SIM_TLKT_RAW = 9,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 255 FUNC_RESET = 15,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 256 FUNC_RESET_WITH_SIM = 16,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 257 FUNC_MIN_WITH_SIM = 19,
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 258 FUNC_HALT = 127
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 259 } FunctionalityMode;
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 260
wajahat.abbas@u-blox.com 20:31d5e048fbfa 261 #ifdef TARGET_UBLOX_C030_R41XM
wajahat.abbas@u-blox.com 20:31d5e048fbfa 262
wajahat.abbas@u-blox.com 20:31d5e048fbfa 263 #if MBED_CONF_UBLOX_CELL_DEFAULT_MNO_PROFILE
wajahat.abbas@u-blox.com 20:31d5e048fbfa 264 #define DEFAULT_MNO_PROFILE (MNOProfile)MBED_CONF_UBLOX_CELL_DEFAULT_MNO_PROFILE
wajahat.abbas@u-blox.com 20:31d5e048fbfa 265 #else
wajahat.abbas@u-blox.com 20:31d5e048fbfa 266 #define DEFAULT_MNO_PROFILE SW_DEFAULT
wajahat.abbas@u-blox.com 20:31d5e048fbfa 267 #endif
wajahat.abbas@u-blox.com 20:31d5e048fbfa 268
wajahat.abbas@u-blox.com 21:98aea8f49cd8 269 /** Reads the current MNO profile from modem and sets it to user specified profile.
wajahat.abbas@u-blox.com 21:98aea8f49cd8 270 * User can also specify profile in mbed_lib.json file and call set_mno_profile without any arguments.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 271 *
wajahat.abbas@u-blox.com 21:98aea8f49cd8 272 * Note: MNO profile should only be set in detached state and a reboot is required for settings to take effect
wajahat.abbas@u-blox.com 29:8a38f91009ad 273 * Note 2: ref to UBX-17003787 B.5, setting MNO profile can change other parameters such as PSM, Band mask, URAT etc.
wajahat.abbas@u-blox.com 29:8a38f91009ad 274 * Application must always set a profile first and if required, change parameters afterwards.
wajahat.abbas@u-blox.com 21:98aea8f49cd8 275 * @param profile MNO profile to use
wajahat.abbas@u-blox.com 20:31d5e048fbfa 276 * @return true if operation was successful, false if there was an error
wajahat.abbas@u-blox.com 20:31d5e048fbfa 277 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 278 bool set_mno_profile(MNOProfile profile = DEFAULT_MNO_PROFILE);
wajahat.abbas@u-blox.com 20:31d5e048fbfa 279
wajahat.abbas@u-blox.com 20:31d5e048fbfa 280 /** Get current MNO profile.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 281 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 282 * @param profile pointer to variable that can hold the value for returned profile
wajahat.abbas@u-blox.com 20:31d5e048fbfa 283 * @return true if operation was successful, false if there was an error
wajahat.abbas@u-blox.com 20:31d5e048fbfa 284 */
wajahat.abbas@u-blox.com 22:779971811c46 285 bool get_mno_profile(int *profile);
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 286
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 287 /** Enable or disable the UPSV Power Saving Mode.
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 288 *
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 289 * @param idle_mode_value 1: enable idle mode
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 290 * 0: disable idle mode
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 291 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 292 */
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 293 bool set_idle_mode(bool enable = false);
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 294
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 295 /** Queries the modem for idle mode status.
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 296 *
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 297 * @param status pointer to variable that can hold the value for idle mode status
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 298 * 1: enabled
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 299 * 0: disabled
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 300 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 301 */
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 302 bool get_idle_mode(int *status);
wajahat.abbas@u-blox.com 20:31d5e048fbfa 303 #endif
wajahat.abbas@u-blox.com 20:31d5e048fbfa 304
wajahat.abbas@u-blox.com 20:31d5e048fbfa 305 /** Set Radio Access Technology on modem.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 306 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 307 * Note: RAT should only be set in detached state and a reboot is required for settings to take effect
wajahat.abbas@u-blox.com 20:31d5e048fbfa 308 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 309 * @param selected_rat Radio Access Technology to use
wajahat.abbas@u-blox.com 20:31d5e048fbfa 310 * @param preferred_rat Radio Access Technology to use if selected_rat is not available
wajahat.abbas@u-blox.com 20:31d5e048fbfa 311 * @param second_preferred_rat Radio Access Technology to use if selected_rat and preferred_rat are not available
wajahat.abbas@u-blox.com 20:31d5e048fbfa 312 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 313 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 314 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 315 bool set_modem_rat(RAT selected_rat, RAT preferred_rat = NOT_USED, RAT second_preferred_rat = NOT_USED);
wajahat.abbas@u-blox.com 20:31d5e048fbfa 316
wajahat.abbas@u-blox.com 20:31d5e048fbfa 317 /** Get last saved values for RAT using +URAT read command. Note: The current selected RAT is indicated by DeviceInfo.rat
wajahat.abbas@u-blox.com 20:31d5e048fbfa 318 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 319 * @param selected_rat pointer to variable that can hold the value for selected_rat
wajahat.abbas@u-blox.com 20:31d5e048fbfa 320 * @param preferred_rat pointer to variable that can hold the value for preferred_rat
wajahat.abbas@u-blox.com 20:31d5e048fbfa 321 * @param second_preferred_rat pointer to variable that can hold the value for second_preferred_rat
wajahat.abbas@u-blox.com 20:31d5e048fbfa 322 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 323 * Note: NOT_USED will be returned in the variables if dual or tri modes are not enabled.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 324 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 325 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 326 */
wajahat.abbas@u-blox.com 22:779971811c46 327 bool get_modem_rat(int *selected_rat, int *preferred_rat, int *second_preferred_rat);
wajahat.abbas@u-blox.com 20:31d5e048fbfa 328
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 329 /** Sets the modem to specified functionality mode.
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 330 *
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 331 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 332 */
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 333 bool set_functionality_mode(FunctionalityMode mode);
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 334
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 335 /** Get the modem functionality mode
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 336 *
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 337 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 338 */
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 339 bool get_functionality_mode(int *mode);
wajahat.abbas@u-blox.com 24:e26a6ab0dd75 340
wajahat.abbas@u-blox.com 23:eaab8e812a5d 341 /** reboot the modem using AT+CFUN=15. Application should call init() or connect() before making any other API calls.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 342 *
wajahat.abbas@u-blox.com 20:31d5e048fbfa 343 * @return true if successful, otherwise false.
wajahat.abbas@u-blox.com 20:31d5e048fbfa 344 */
wajahat.abbas@u-blox.com 20:31d5e048fbfa 345 bool reboot_modem();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 346
wajahat.abbas@u-blox.com 23:eaab8e812a5d 347 #ifdef TARGET_UBLOX_C030_R412M
wajahat.abbas@u-blox.com 23:eaab8e812a5d 348 /** Important: Callback function is executed in context of AT parser so a user should not issue any AT commands from inside the callback.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 349 * It is recommended to set a flag/event/signal in callback and application can use that to wake up the modem and re-initialize it
wajahat.abbas@u-blox.com 23:eaab8e812a5d 350 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 351 * application callback for modem going in to PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 352 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 353 * @param func callback function to be executed when modem is going in to PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 354 * @param param parameter to be passed to callback function.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 355 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 356 void attach_cb_psm_going_in(Callback<void(void*)> func, void *param)
wajahat.abbas@u-blox.com 23:eaab8e812a5d 357 {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 358 _func_psm_going_in = func;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 359 _cb_param_psm_going_in = param;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 360 }
wajahat.abbas@u-blox.com 23:eaab8e812a5d 361
wajahat.abbas@u-blox.com 23:eaab8e812a5d 362 /** Important: Callback function is executed in context of AT parser so a user should not issue any AT commands from inside the callback.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 363 * It is recommended to set a flag/event/signal in callback and application can use that to wake up the modem and re-initialize it
wajahat.abbas@u-blox.com 23:eaab8e812a5d 364 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 365 * application callback for modem coming out of PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 366 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 367 * @param func callback function to be executed when modem is coming out of PSM sleep.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 368 * @param param parameter to be passed to callback function.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 369 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 370 void attach_cb_psm_coming_out(Callback<void(void*)> func, void *param)
wajahat.abbas@u-blox.com 23:eaab8e812a5d 371 {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 372 _func_psm_coming_out = func;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 373 _cb_param_psm_coming_out = param;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 374 }
wajahat.abbas@u-blox.com 23:eaab8e812a5d 375
wajahat.abbas@u-blox.com 23:eaab8e812a5d 376 /** de-register the application callback for modem going in to PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 377 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 378 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 379 void detach_cb_psm_going_in()
wajahat.abbas@u-blox.com 23:eaab8e812a5d 380 {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 381 _func_psm_going_in = NULL;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 382 _cb_param_psm_going_in = NULL;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 383 }
wajahat.abbas@u-blox.com 23:eaab8e812a5d 384
wajahat.abbas@u-blox.com 23:eaab8e812a5d 385 /** de-register application callback for modem coming out of PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 386 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 387 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 388 void detach_cb_psm_coming_out()
wajahat.abbas@u-blox.com 23:eaab8e812a5d 389 {
wajahat.abbas@u-blox.com 23:eaab8e812a5d 390 _func_psm_coming_out = NULL;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 391 _cb_param_psm_coming_out = NULL;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 392 }
wajahat.abbas@u-blox.com 23:eaab8e812a5d 393
wajahat.abbas@u-blox.com 23:eaab8e812a5d 394 /** Enable or disable the 3GPP PSM.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 395 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 396 * Note: Application should reboot the module after enabling PSM in order to enter PSM state. (reboot_modem())
wajahat.abbas@u-blox.com 23:eaab8e812a5d 397 * Note: Modem can be woken up by toggling the power-on signal. (wakeup_modem())
wajahat.abbas@u-blox.com 23:eaab8e812a5d 398 * Note: When device enters PSM, all connections(PPP, sockets) and settings that are not saved in NV memory(ATE0, CREG etc) are lost.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 399 * host application should be prepared to re-initialize the modem and re-establish the connections.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 400 * Note: PSM is disabled if both periodic_time and active_time are 0.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 401 * Note: Not all variants/firmware versions support PSM URCs and in that case function will return false.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 402 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 403 * PSM string encoding code is borrowed from AT_CellularPower.cpp
wajahat.abbas@u-blox.com 23:eaab8e812a5d 404 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 405 * @param periodic_time requested periodic TAU in seconds.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 406 * @param active_time requested active time in seconds.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 407 * @param func callback function to execute when modem goes to sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 408 * @param ptr parameter to callback function
wajahat.abbas@u-blox.com 23:eaab8e812a5d 409 * @return True if successful, otherwise false.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 410 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 411 bool set_power_saving_mode(int periodic_tau, int active_time);
wajahat.abbas@u-blox.com 23:eaab8e812a5d 412
wajahat.abbas@u-blox.com 23:eaab8e812a5d 413 /** Reads the 3GPP PSM status (enabled or disabled) and returns assigned periodic tau and active time values.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 414 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 415 * @param status 0: PSM disabled, 1: PSM enabled
wajahat.abbas@u-blox.com 23:eaab8e812a5d 416 * @param periodic_tau assigned periodic TAU in seconds.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 417 * @param active_time assigned active time in seconds
wajahat.abbas@u-blox.com 23:eaab8e812a5d 418 * @return True if command successful, otherwise false.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 419 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 420 bool get_power_saving_mode(int *status, int *periodic_tau, int *active_time);
wajahat.abbas@u-blox.com 23:eaab8e812a5d 421
wajahat.abbas@u-blox.com 23:eaab8e812a5d 422 /** Wake up the modem from PSM. Ref to comment on set_power_saving_mode, application should call init() or connect()
wajahat.abbas@u-blox.com 23:eaab8e812a5d 423 * before making any other API calls.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 424 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 425 void wakeup_modem();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 426
wajahat.abbas@u-blox.com 23:eaab8e812a5d 427 /** True if the modem is not in PSM sleep
wajahat.abbas@u-blox.com 23:eaab8e812a5d 428 * otherwise false.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 429 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 430 bool is_modem_awake();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 431 #endif
wajahat.abbas@u-blox.com 23:eaab8e812a5d 432
fahimalavi 26:e4e444cc7b14 433 #ifdef TARGET_UBLOX_C030_R41XM
fahimalavi 26:e4e444cc7b14 434 /** Set discontinuous reception time on cellular device.
fahimalavi 26:e4e444cc7b14 435 * SARA-R404M / SARA-R410M-02B / SARA-R410M-52B / SARA-R412M / SARA-N4 : The <Paging_time_window> parameter cannot be set by means of the set command.
fahimalavi 26:e4e444cc7b14 436 *
fahimalavi 26:e4e444cc7b14 437 *
fahimalavi 26:e4e444cc7b14 438 * @remark See 3GPP TS 27.007 eDRX for details.
fahimalavi 26:e4e444cc7b14 439 *
fahimalavi 26:e4e444cc7b14 440 * @param mode disable or enable the use of eDRX
fahimalavi 26:e4e444cc7b14 441 * @param act_type type of access technology
fahimalavi 26:e4e444cc7b14 442 * @param edrx_value requested edxr value. Extended DRX parameters information element.
fahimalavi 26:e4e444cc7b14 443 *
fahimalavi 26:e4e444cc7b14 444 * @return 0 on success
fahimalavi 26:e4e444cc7b14 445 * 1 on failure
fahimalavi 26:e4e444cc7b14 446 */
fahimalavi 26:e4e444cc7b14 447 int set_receive_period(int mode, tEDRXAccessTechnology act_type, uint8_t edrx_value);
fahimalavi 26:e4e444cc7b14 448
fahimalavi 26:e4e444cc7b14 449 /** Set discontinuous reception time on cellular device.
fahimalavi 26:e4e444cc7b14 450 *
fahimalavi 26:e4e444cc7b14 451 * @remark See 3GPP TS 27.007 eDRX for details.
fahimalavi 26:e4e444cc7b14 452 *
fahimalavi 26:e4e444cc7b14 453 * @param mode disable or enable the use of eDRX
fahimalavi 26:e4e444cc7b14 454 * @param act_type type of access technology
fahimalavi 26:e4e444cc7b14 455 *
fahimalavi 26:e4e444cc7b14 456 * @return 0 on success
fahimalavi 26:e4e444cc7b14 457 * 1 on failure
fahimalavi 26:e4e444cc7b14 458 */
fahimalavi 26:e4e444cc7b14 459 int set_receive_period(int mode, tEDRXAccessTechnology act_type);
fahimalavi 26:e4e444cc7b14 460
fahimalavi 26:e4e444cc7b14 461 /** Set discontinuous reception time on cellular device. (Disable)
fahimalavi 26:e4e444cc7b14 462 *
fahimalavi 26:e4e444cc7b14 463 * @remark See 3GPP TS 27.007 eDRX for details.
fahimalavi 26:e4e444cc7b14 464 *
fahimalavi 26:e4e444cc7b14 465 * @param mode disable or enable the use of eDRX
fahimalavi 26:e4e444cc7b14 466 *
fahimalavi 26:e4e444cc7b14 467 * @return 0 on success
fahimalavi 26:e4e444cc7b14 468 * 1 on failure
fahimalavi 26:e4e444cc7b14 469 */
fahimalavi 26:e4e444cc7b14 470 int set_receive_period(int mode);
fahimalavi 26:e4e444cc7b14 471
fahimalavi 26:e4e444cc7b14 472 /** get discontinuous reception time on cellular device.
fahimalavi 26:e4e444cc7b14 473 *
fahimalavi 26:e4e444cc7b14 474 * @remark See 3GPP TS 27.007 eDRX for details.
fahimalavi 26:e4e444cc7b14 475 *
fahimalavi 26:e4e444cc7b14 476 * @return uint32_t
fahimalavi 26:e4e444cc7b14 477 */
fahimalavi 26:e4e444cc7b14 478 uint32_t get_receive_period();
fahimalavi 30:38230504a646 479
fahimalavi 30:38230504a646 480 /** set band select bitmask
fahimalavi 30:38230504a646 481 *
fahimalavi 30:38230504a646 482 * @param RAT RAT type
fahimalavi 30:38230504a646 483 * @param bitmask bitmask
fahimalavi 30:38230504a646 484 * @return True if successful, otherwise false.
fahimalavi 30:38230504a646 485 */
fahimalavi 30:38230504a646 486 bool set_band_bitmask(RAT rat, uint64_t bitmask);
fahimalavi 26:e4e444cc7b14 487 #endif
fahimalavi 26:e4e444cc7b14 488
RobMeades 0:5cffef3371f6 489 protected:
RobMeades 0:5cffef3371f6 490
RobMeades 0:5cffef3371f6 491 #define OUTPUT_ENTER_KEY "\r"
RobMeades 0:5cffef3371f6 492
RobMeades 0:5cffef3371f6 493 #if MBED_CONF_UBLOX_CELL_GEN_DRV_AT_PARSER_BUFFER_SIZE
RobMeades 0:5cffef3371f6 494 #define AT_PARSER_BUFFER_SIZE MBED_CONF_UBLOX_CELL_GEN_DRV_AT_PARSER_BUFFER_SIZE
RobMeades 0:5cffef3371f6 495 #else
RobMeades 0:5cffef3371f6 496 #define AT_PARSER_BUFFER_SIZE 256
RobMeades 0:5cffef3371f6 497 #endif
RobMeades 0:5cffef3371f6 498
RobMeades 0:5cffef3371f6 499 #if MBED_CONF_UBLOX_CELL_GEN_DRV_AT_PARSER_TIMEOUT
RobMeades 0:5cffef3371f6 500 #define AT_PARSER_TIMEOUT MBED_CONF_UBLOX_CELL_GEN_DRV_AT_PARSER_TIMEOUT
RobMeades 0:5cffef3371f6 501 #else
RobMeades 0:5cffef3371f6 502 #define AT_PARSER_TIMEOUT 8*1000 // Milliseconds
RobMeades 0:5cffef3371f6 503 #endif
RobMeades 0:5cffef3371f6 504
RobMeades 0:5cffef3371f6 505 /** A string that would not normally be sent by the modem on the AT interface.
RobMeades 0:5cffef3371f6 506 */
RobMeades 0:5cffef3371f6 507 #define UNNATURAL_STRING "\x01"
RobMeades 0:5cffef3371f6 508
RobMeades 0:5cffef3371f6 509 /** Supported u-blox modem variants.
RobMeades 0:5cffef3371f6 510 */
RobMeades 0:5cffef3371f6 511 typedef enum {
RobMeades 0:5cffef3371f6 512 DEV_TYPE_NONE = 0,
RobMeades 0:5cffef3371f6 513 DEV_SARA_G35,
RobMeades 0:5cffef3371f6 514 DEV_LISA_U2,
RobMeades 0:5cffef3371f6 515 DEV_LISA_U2_03S,
RobMeades 0:5cffef3371f6 516 DEV_SARA_U2,
fahim alavi 11:57f64bc518c0 517 DEV_SARA_R4,
RobMeades 0:5cffef3371f6 518 DEV_LEON_G2,
RobMeades 0:5cffef3371f6 519 DEV_TOBY_L2,
RobMeades 0:5cffef3371f6 520 DEV_MPCI_L2
RobMeades 0:5cffef3371f6 521 } DeviceType;
RobMeades 0:5cffef3371f6 522
RobMeades 0:5cffef3371f6 523 /** Network registration status.
RobMeades 0:5cffef3371f6 524 * UBX-13001820 - AT Commands Example Application Note (Section 4.1.4.5).
RobMeades 0:5cffef3371f6 525 */
RobMeades 0:5cffef3371f6 526 typedef enum {
RobMeades 0:5cffef3371f6 527 GSM = 0,
RobMeades 0:5cffef3371f6 528 COMPACT_GSM = 1,
RobMeades 0:5cffef3371f6 529 UTRAN = 2,
RobMeades 0:5cffef3371f6 530 EDGE = 3,
RobMeades 0:5cffef3371f6 531 HSDPA = 4,
RobMeades 0:5cffef3371f6 532 HSUPA = 5,
RobMeades 0:5cffef3371f6 533 HSDPA_HSUPA = 6,
fahimalavi 10:c4281fa79b8f 534 LTE = 7,
fahim alavi 12:aa3cbc3f88c5 535 EC_GSM_IoT = 8,
fahim alavi 12:aa3cbc3f88c5 536 E_UTRAN_NB_S1 = 9
RobMeades 0:5cffef3371f6 537 } RadioAccessNetworkType;
RobMeades 0:5cffef3371f6 538
RobMeades 0:5cffef3371f6 539 /** Info about the modem.
RobMeades 0:5cffef3371f6 540 */
RobMeades 0:5cffef3371f6 541 typedef struct {
RobMeades 0:5cffef3371f6 542 DeviceType dev;
RobMeades 0:5cffef3371f6 543 char iccid[20 + 1]; //!< Integrated Circuit Card ID.
RobMeades 0:5cffef3371f6 544 char imsi[15 + 1]; //!< International Mobile Station Identity.
RobMeades 0:5cffef3371f6 545 char imei[15 + 1]; //!< International Mobile Equipment Identity.
RobMeades 0:5cffef3371f6 546 char meid[18 + 1]; //!< Mobile Equipment IDentifier.
RobMeades 0:5cffef3371f6 547 volatile RadioAccessNetworkType rat; //!< Type of network (e.g. 2G, 3G, LTE).
RobMeades 0:5cffef3371f6 548 volatile NetworkRegistrationStatusCsd reg_status_csd; //!< Circuit switched attach status.
RobMeades 0:5cffef3371f6 549 volatile NetworkRegistrationStatusPsd reg_status_psd; //!< Packet switched attach status.
RobMeades 0:5cffef3371f6 550 volatile NetworkRegistrationStatusEps reg_status_eps; //!< Evolved Packet Switched (e.g. LTE) attach status.
wajahat.abbas@u-blox.com 23:eaab8e812a5d 551 #ifdef TARGET_UBLOX_C030_R412M
wajahat.abbas@u-blox.com 23:eaab8e812a5d 552 volatile ModemPSMState modem_psm_state; //!< last known modem PSM state
wajahat.abbas@u-blox.com 23:eaab8e812a5d 553 #endif
RobMeades 0:5cffef3371f6 554 } DeviceInfo;
RobMeades 0:5cffef3371f6 555
RobMeades 0:5cffef3371f6 556 /* IMPORTANT: the variables below are available to
RobMeades 0:5cffef3371f6 557 * classes that inherit this in order to keep things
RobMeades 0:5cffef3371f6 558 * simple. However, ONLY this class should free
RobMeades 0:5cffef3371f6 559 * any of the pointers, or there will be havoc.
RobMeades 0:5cffef3371f6 560 */
RobMeades 0:5cffef3371f6 561
RobMeades 0:5cffef3371f6 562 /** Point to the instance of the AT parser in use.
RobMeades 0:5cffef3371f6 563 */
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 564 #ifdef TARGET_UBLOX_C030_R41XM
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 565 UbloxATCmdParser *_at;
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 566 #else
RobMeades 0:5cffef3371f6 567 ATCmdParser *_at;
wajahat.abbas@u-blox.com 25:e67d3d9d2e7e 568 #endif
RobMeades 0:5cffef3371f6 569
RobMeades 0:5cffef3371f6 570 /** The current AT parser timeout value.
RobMeades 0:5cffef3371f6 571 */
RobMeades 0:5cffef3371f6 572 int _at_timeout;
RobMeades 0:5cffef3371f6 573
RobMeades 0:5cffef3371f6 574 /** File handle used by the AT parser.
RobMeades 0:5cffef3371f6 575 */
RobMeades 0:5cffef3371f6 576 FileHandle *_fh;
RobMeades 0:5cffef3371f6 577
RobMeades 0:5cffef3371f6 578 /** The mutex resource.
RobMeades 0:5cffef3371f6 579 */
RobMeades 0:5cffef3371f6 580 Mutex _mtx;
RobMeades 0:5cffef3371f6 581
RobMeades 0:5cffef3371f6 582 /** General info about the modem as a device.
RobMeades 0:5cffef3371f6 583 */
RobMeades 0:5cffef3371f6 584 DeviceInfo _dev_info;
RobMeades 0:5cffef3371f6 585
RobMeades 0:5cffef3371f6 586 /** The SIM PIN to use.
RobMeades 0:5cffef3371f6 587 */
RobMeades 0:5cffef3371f6 588 const char *_pin;
RobMeades 0:5cffef3371f6 589
RobMeades 0:5cffef3371f6 590 /** Set to true to spit out debug traces.
RobMeades 0:5cffef3371f6 591 */
RobMeades 0:5cffef3371f6 592 bool _debug_trace_on;
rob.meades@u-blox.com 4:2e640a101db1 593
rob.meades@u-blox.com 4:2e640a101db1 594 /** The baud rate to the modem.
rob.meades@u-blox.com 4:2e640a101db1 595 */
rob.meades@u-blox.com 4:2e640a101db1 596 int _baud;
RobMeades 0:5cffef3371f6 597
RobMeades 0:5cffef3371f6 598 /** True if the modem is ready register to the network,
RobMeades 0:5cffef3371f6 599 * otherwise false.
RobMeades 0:5cffef3371f6 600 */
RobMeades 0:5cffef3371f6 601 bool _modem_initialised;
RobMeades 0:5cffef3371f6 602
RobMeades 0:5cffef3371f6 603 /** True it the SIM requires a PIN, otherwise false.
RobMeades 0:5cffef3371f6 604 */
RobMeades 0:5cffef3371f6 605 bool _sim_pin_check_enabled;
RobMeades 0:5cffef3371f6 606
RobMeades 0:5cffef3371f6 607 /** Sets the modem up for powering on
RobMeades 0:5cffef3371f6 608 *
RobMeades 0:5cffef3371f6 609 * modem_init() is equivalent to plugging in the device, e.g., attaching power and serial port.
RobMeades 0:5cffef3371f6 610 * Uses onboard_modem_api.h where the implementation of onboard_modem_api is provided by the target.
RobMeades 0:5cffef3371f6 611 */
RobMeades 0:5cffef3371f6 612 virtual void modem_init();
RobMeades 0:5cffef3371f6 613
RobMeades 0:5cffef3371f6 614 /** Sets the modem in unplugged state
RobMeades 0:5cffef3371f6 615 *
RobMeades 0:5cffef3371f6 616 * modem_deinit() will be equivalent to pulling the plug off of the device, i.e., detaching power
RobMeades 0:5cffef3371f6 617 * and serial port. This puts the modem in lowest power state.
RobMeades 0:5cffef3371f6 618 * Uses onboard_modem_api.h where the implementation of onboard_modem_api is provided by the target.
RobMeades 0:5cffef3371f6 619 */
RobMeades 0:5cffef3371f6 620 virtual void modem_deinit();
RobMeades 0:5cffef3371f6 621
RobMeades 0:5cffef3371f6 622 /** Powers up the modem
RobMeades 0:5cffef3371f6 623 *
RobMeades 0:5cffef3371f6 624 * modem_power_up() is equivalent to pressing the soft power button.
RobMeades 0:5cffef3371f6 625 * The driver may repeat this if the modem is not responsive to AT commands.
RobMeades 0:5cffef3371f6 626 * Uses onboard_modem_api.h where the implementation of onboard_modem_api is provided by the target.
RobMeades 0:5cffef3371f6 627 */
RobMeades 0:5cffef3371f6 628 virtual void modem_power_up();
RobMeades 0:5cffef3371f6 629
RobMeades 0:5cffef3371f6 630 /** Powers down the modem
RobMeades 0:5cffef3371f6 631 *
RobMeades 0:5cffef3371f6 632 * modem_power_down() is equivalent to turning off the modem by button press.
RobMeades 0:5cffef3371f6 633 * Uses onboard_modem_api.h where the implementation of onboard_modem_api is provided by the target.
RobMeades 0:5cffef3371f6 634 */
RobMeades 0:5cffef3371f6 635 virtual void modem_power_down();
RobMeades 0:5cffef3371f6 636
RobMeades 0:5cffef3371f6 637 /* Note: constructor and destructor protected so that this
RobMeades 0:5cffef3371f6 638 * class can only ever be inherited, never used directly.
RobMeades 0:5cffef3371f6 639 */
RobMeades 0:5cffef3371f6 640 UbloxCellularBase();
RobMeades 0:5cffef3371f6 641 ~UbloxCellularBase();
RobMeades 0:5cffef3371f6 642
RobMeades 0:5cffef3371f6 643 /** Initialise this class.
RobMeades 0:5cffef3371f6 644 *
RobMeades 0:5cffef3371f6 645 * @param tx the UART TX data pin to which the modem is attached.
RobMeades 0:5cffef3371f6 646 * @param rx the UART RX data pin to which the modem is attached.
RobMeades 0:5cffef3371f6 647 * @param baud the UART baud rate.
RobMeades 0:5cffef3371f6 648 * @param debug_on true to switch AT interface debug on, otherwise false.
RobMeades 0:5cffef3371f6 649 *
RobMeades 0:5cffef3371f6 650 * Note: it would be more natural to do this in the constructor
RobMeades 0:5cffef3371f6 651 * however, to avoid the diamond of death, this class is only
RobMeades 0:5cffef3371f6 652 * every inherited virtually. Classes that are inherited virtually
RobMeades 0:5cffef3371f6 653 * do not get passed parameters in their constructor and hence
RobMeades 0:5cffef3371f6 654 * classInit() must be called separately by the first one to wake
RobMeades 0:5cffef3371f6 655 * the beast.
RobMeades 0:5cffef3371f6 656 */
RobMeades 0:5cffef3371f6 657 void baseClassInit(PinName tx = MDMTXD,
RobMeades 0:5cffef3371f6 658 PinName rx = MDMRXD,
RobMeades 0:5cffef3371f6 659 int baud = MBED_CONF_UBLOX_CELL_BAUD_RATE,
RobMeades 0:5cffef3371f6 660 bool debug_on = false);
RobMeades 0:5cffef3371f6 661
RobMeades 0:5cffef3371f6 662 /** Set the AT parser timeout.
RobMeades 0:5cffef3371f6 663 */
RobMeades 0:5cffef3371f6 664 void at_set_timeout(int timeout);
RobMeades 0:5cffef3371f6 665
RobMeades 0:5cffef3371f6 666 /** Read up to size characters from buf
RobMeades 0:5cffef3371f6 667 * or until the character "end" is reached, overwriting
RobMeades 0:5cffef3371f6 668 * the newline with 0 and ensuring a terminator
RobMeades 0:5cffef3371f6 669 * in all cases.
RobMeades 0:5cffef3371f6 670 *
RobMeades 0:5cffef3371f6 671 * @param buf the buffer to write to.
RobMeades 0:5cffef3371f6 672 * @param size the size of the buffer.
RobMeades 0:5cffef3371f6 673 * @param end the character to stop at.
RobMeades 0:5cffef3371f6 674 * @return the number of characters read,
RobMeades 0:5cffef3371f6 675 * not including the terminator.
RobMeades 0:5cffef3371f6 676 */
RobMeades 0:5cffef3371f6 677 int read_at_to_char(char * buf, int size, char end);
RobMeades 0:5cffef3371f6 678
RobMeades 0:5cffef3371f6 679 /** Powers up the modem.
RobMeades 0:5cffef3371f6 680 *
RobMeades 0:5cffef3371f6 681 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 682 */
RobMeades 0:5cffef3371f6 683 bool power_up();
RobMeades 0:5cffef3371f6 684
RobMeades 0:5cffef3371f6 685 /** Power down the modem.
RobMeades 0:5cffef3371f6 686 */
RobMeades 0:5cffef3371f6 687 void power_down();
RobMeades 0:5cffef3371f6 688
RobMeades 0:5cffef3371f6 689 /** Lock a mutex when accessing the modem.
RobMeades 0:5cffef3371f6 690 */
RobMeades 0:5cffef3371f6 691 void lock(void) { _mtx.lock(); }
RobMeades 0:5cffef3371f6 692
RobMeades 0:5cffef3371f6 693 /** Helper to make sure that lock unlock pair is always balanced
RobMeades 0:5cffef3371f6 694 */
RobMeades 0:5cffef3371f6 695 #define LOCK() { lock()
RobMeades 0:5cffef3371f6 696
RobMeades 0:5cffef3371f6 697 /** Unlock the modem when done accessing it.
RobMeades 0:5cffef3371f6 698 */
RobMeades 0:5cffef3371f6 699 void unlock(void) { _mtx.unlock(); }
RobMeades 0:5cffef3371f6 700
RobMeades 0:5cffef3371f6 701 /** Helper to make sure that lock unlock pair is always balanced
RobMeades 0:5cffef3371f6 702 */
RobMeades 0:5cffef3371f6 703 #define UNLOCK() } unlock()
RobMeades 0:5cffef3371f6 704
RobMeades 0:5cffef3371f6 705 /** Set the device identity in _dev_info
RobMeades 0:5cffef3371f6 706 * based on the ATI string returned by
RobMeades 0:5cffef3371f6 707 * the module.
RobMeades 0:5cffef3371f6 708 *
RobMeades 0:5cffef3371f6 709 * @return true if dev is a known value,
RobMeades 0:5cffef3371f6 710 * otherwise false.
RobMeades 0:5cffef3371f6 711 */
RobMeades 0:5cffef3371f6 712 bool set_device_identity(DeviceType *dev);
RobMeades 0:5cffef3371f6 713
RobMeades 0:5cffef3371f6 714 /** Perform any modem initialisation that is
RobMeades 0:5cffef3371f6 715 * specialised by device type.
RobMeades 0:5cffef3371f6 716 *
RobMeades 0:5cffef3371f6 717 * @return true if successful, otherwise false.
RobMeades 0:5cffef3371f6 718 */
RobMeades 0:5cffef3371f6 719 bool device_init(DeviceType dev);
RobMeades 0:5cffef3371f6 720
RobMeades 0:5cffef3371f6 721 /** Set up the SIM.
RobMeades 0:5cffef3371f6 722 *
RobMeades 0:5cffef3371f6 723 * @return true if successful, otherwiss false.
RobMeades 0:5cffef3371f6 724 */
RobMeades 0:5cffef3371f6 725 bool initialise_sim_card();
RobMeades 0:5cffef3371f6 726
wajahat.abbas@u-blox.com 29:8a38f91009ad 727 #ifdef TARGET_UBLOX_C030_R41XM
wajahat.abbas@u-blox.com 23:eaab8e812a5d 728 /** Converts the given uint to binary string. Fills the given str starting from [0] with the number of bits defined by bit_cnt
wajahat.abbas@u-blox.com 23:eaab8e812a5d 729 * For example uint_to_binary_string(9, str, 10) would fill str "0000001001"
wajahat.abbas@u-blox.com 23:eaab8e812a5d 730 * For example uint_to_binary_string(9, str, 3) would fill str "001"
wajahat.abbas@u-blox.com 23:eaab8e812a5d 731 *
wajahat.abbas@u-blox.com 23:eaab8e812a5d 732 * @param num uint to converts to binary string
wajahat.abbas@u-blox.com 23:eaab8e812a5d 733 * @param str buffer for converted binary string
wajahat.abbas@u-blox.com 23:eaab8e812a5d 734 * @param str_size size of the str buffer
wajahat.abbas@u-blox.com 23:eaab8e812a5d 735 * @param bit_cnt defines how many bits are filled to buffer started from lsb
wajahat.abbas@u-blox.com 23:eaab8e812a5d 736 */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 737 void uint_to_binary_str(uint32_t num, char* str, int str_size, int bit_cnt);
fahimalavi 26:e4e444cc7b14 738
fahimalavi 26:e4e444cc7b14 739 /** Converts the given binary string to uint.
fahimalavi 26:e4e444cc7b14 740 * For example binary_str_to_uint("0000001001", 10) would return 9
fahimalavi 26:e4e444cc7b14 741 *
fahimalavi 26:e4e444cc7b14 742 * @param binary_string binary string from where chars are converted to uint
fahimalavi 26:e4e444cc7b14 743 * @param binary_string_length length of the param binary_string
fahimalavi 26:e4e444cc7b14 744 * @return uint represented by the binary string
fahimalavi 26:e4e444cc7b14 745 */
fahimalavi 26:e4e444cc7b14 746 uint32_t binary_str_to_uint(const char *binary_string, int binary_string_length);
fahimalavi 26:e4e444cc7b14 747
wajahat.abbas@u-blox.com 23:eaab8e812a5d 748 #endif
wajahat.abbas@u-blox.com 23:eaab8e812a5d 749
RobMeades 0:5cffef3371f6 750 private:
RobMeades 0:5cffef3371f6 751
RobMeades 0:5cffef3371f6 752 void set_nwk_reg_status_csd(int status);
RobMeades 0:5cffef3371f6 753 void set_nwk_reg_status_psd(int status);
RobMeades 0:5cffef3371f6 754 void set_nwk_reg_status_eps(int status);
RobMeades 0:5cffef3371f6 755 void set_rat(int AcTStatus);
RobMeades 0:5cffef3371f6 756 bool get_iccid();
RobMeades 0:5cffef3371f6 757 bool get_imsi();
RobMeades 0:5cffef3371f6 758 bool get_imei();
RobMeades 0:5cffef3371f6 759 bool get_meid();
RobMeades 0:5cffef3371f6 760 bool set_sms();
RobMeades 0:5cffef3371f6 761 void parser_abort_cb();
RobMeades 0:5cffef3371f6 762 void CMX_ERROR_URC();
RobMeades 0:5cffef3371f6 763 void CREG_URC();
RobMeades 0:5cffef3371f6 764 void CGREG_URC();
RobMeades 0:5cffef3371f6 765 void CEREG_URC();
RobMeades 0:5cffef3371f6 766 void UMWI_URC();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 767 #ifdef TARGET_UBLOX_C030_R412M
wajahat.abbas@u-blox.com 31:915ce07813da 768 bool set_psm_urcs(bool enable);
wajahat.abbas@u-blox.com 23:eaab8e812a5d 769 void UUPSMR_URC();
wajahat.abbas@u-blox.com 23:eaab8e812a5d 770 bool _psm_status;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 771 void *_cb_param_psm_going_in;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 772 Callback<void(void*)> _func_psm_going_in; /**< Callback. */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 773 void *_cb_param_psm_coming_out;
wajahat.abbas@u-blox.com 23:eaab8e812a5d 774 Callback<void(void*)> _func_psm_coming_out; /**< Callback. */
wajahat.abbas@u-blox.com 23:eaab8e812a5d 775 void set_modem_psm_state(int state);
wajahat.abbas@u-blox.com 23:eaab8e812a5d 776 #endif
fahimalavi 26:e4e444cc7b14 777 #ifdef TARGET_UBLOX_C030_R41XM
fahimalavi 26:e4e444cc7b14 778 bool _edrx_configured;
fahimalavi 26:e4e444cc7b14 779 #endif
RobMeades 0:5cffef3371f6 780 };
RobMeades 0:5cffef3371f6 781
rob.meades@u-blox.com 1:5aaecf2572dc 782 #endif // _UBLOX_CELLULAR_BASE_
RobMeades 0:5cffef3371f6 783