Vybhav Kadaba
/
EV-PRO-MW1001_test2
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Diff: inc/admw1001/ADMW1001_REGISTERS.h
- Revision:
- 44:94bdfaefddac
- Parent:
- 43:e1789b7214cf
- Child:
- 50:d84305e5e1c0
--- a/inc/admw1001/ADMW1001_REGISTERS.h Tue Jan 07 05:45:58 2020 +0000
+++ b/inc/admw1001/ADMW1001_REGISTERS.h Thu Jan 16 06:52:27 2020 +0000
@@ -1,7 +1,7 @@
/* ================================================================================
Created by :
- Created on : 2019 Oct 08, 09:43 GMT Daylight Time
+ Created on : 2020 Jan 08, 12:45 GMT Standard Time
Project : ADMW1001_REGISTERS
File : ADMW1001_REGISTERS.h
@@ -10,7 +10,7 @@
!! ADI Confidential !!
INTERNAL USE ONLY
- Copyright (c) 2019 Analog Devices, Inc. All Rights Reserved.
+ Copyright (c) 2020 Analog Devices, Inc. All Rights Reserved.
This software is proprietary and confidential to Analog Devices, Inc. and
its licensors.
@@ -262,6 +262,8 @@
#define REG_CORE_EXTERNAL_REFERENCE_RESISTOR 0x00000050 /* CORE External Reference Resistor Value */
#define REG_CORE_EXTERNAL_VOLTAGE_REFERENCE_RESET 0x3F99999A /* Reset Value for External_Voltage_Reference */
#define REG_CORE_EXTERNAL_VOLTAGE_REFERENCE 0x00000054 /* CORE External Reference Information */
+#define REG_CORE_AVDD_VOLTAGE_RESET 0x40533333 /* Reset Value for AVDD_Voltage */
+#define REG_CORE_AVDD_VOLTAGE 0x00000058 /* CORE AVDD Voltage */
#define REG_CORE_DIAGNOSTICS_CONTROL_RESET 0x00000000 /* Reset Value for Diagnostics_Control */
#define REG_CORE_DIAGNOSTICS_CONTROL 0x0000005C /* CORE Diagnostic Control */
#define REG_CORE_DATA_FIFO_RESET 0x00000000 /* Reset Value for Data_FIFO */
@@ -580,8 +582,6 @@
#define REG_CORE_SENSOR_GAIN8_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN8 */
#define REG_CORE_SENSOR_GAIN9_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN9 */
#define REG_CORE_SENSOR_GAIN10_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN10 */
-#define REG_CORE_SENSOR_GAIN11_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN11 */
-#define REG_CORE_SENSOR_GAIN12_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN12 */
#define REG_CORE_SENSOR_GAIN0 0x000000AC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAIN1 0x000000EC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAIN2 0x0000012C /* CORE Sensor Gain Adjustment */
@@ -593,10 +593,8 @@
#define REG_CORE_SENSOR_GAIN8 0x000002AC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAIN9 0x000002EC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAIN10 0x0000032C /* CORE Sensor Gain Adjustment */
-#define REG_CORE_SENSOR_GAIN11 0x0000036C /* CORE Sensor Gain Adjustment */
-#define REG_CORE_SENSOR_GAIN12 0x000003AC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAINn(i) (REG_CORE_SENSOR_GAIN0 + ((i) * 64))
-#define REG_CORE_SENSOR_GAINn_COUNT 13
+#define REG_CORE_SENSOR_GAINn_COUNT 11
#define REG_CORE_CHANNEL_SKIPn_RESET 0x00000000 /* Reset Value for Channel_Skip[n] */
#define REG_CORE_CHANNEL_SKIP0_RESET 0x00000000 /* Reset Value for REG_CORE_CHANNEL_SKIP0 */
#define REG_CORE_CHANNEL_SKIP1_RESET 0x00000000 /* Reset Value for REG_CORE_CHANNEL_SKIP1 */
@@ -626,6 +624,35 @@
#define REG_CORE_CHANNEL_SKIP12 0x000003B2 /* CORE Indicates If Channel Will Skip Some Measurement Cycles */
#define REG_CORE_CHANNEL_SKIPn(i) (REG_CORE_CHANNEL_SKIP0 + ((i) * 64))
#define REG_CORE_CHANNEL_SKIPn_COUNT 13
+#define REG_CORE_SENSOR_PARAMETERn_RESET 0x7FC00000 /* Reset Value for Sensor_Parameter[n] */
+#define REG_CORE_SENSOR_PARAMETER0_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER0 */
+#define REG_CORE_SENSOR_PARAMETER1_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER1 */
+#define REG_CORE_SENSOR_PARAMETER2_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER2 */
+#define REG_CORE_SENSOR_PARAMETER3_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER3 */
+#define REG_CORE_SENSOR_PARAMETER4_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER4 */
+#define REG_CORE_SENSOR_PARAMETER5_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER5 */
+#define REG_CORE_SENSOR_PARAMETER6_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER6 */
+#define REG_CORE_SENSOR_PARAMETER7_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER7 */
+#define REG_CORE_SENSOR_PARAMETER8_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER8 */
+#define REG_CORE_SENSOR_PARAMETER9_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER9 */
+#define REG_CORE_SENSOR_PARAMETER10_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER10 */
+#define REG_CORE_SENSOR_PARAMETER11_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER11 */
+#define REG_CORE_SENSOR_PARAMETER12_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER12 */
+#define REG_CORE_SENSOR_PARAMETER0 0x000000B4 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER1 0x000000F4 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER2 0x00000134 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER3 0x00000174 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER4 0x000001B4 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER5 0x000001F4 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER6 0x00000234 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER7 0x00000274 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER8 0x000002B4 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER9 0x000002F4 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER10 0x00000334 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER11 0x00000374 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETER12 0x000003B4 /* CORE Sensor Parameter Adjustment */
+#define REG_CORE_SENSOR_PARAMETERn(i) (REG_CORE_SENSOR_PARAMETER0 + ((i) * 64))
+#define REG_CORE_SENSOR_PARAMETERn_COUNT 13
#define REG_CORE_DIGITAL_SENSOR_CONFIGn_RESET 0x00000000 /* Reset Value for Digital_Sensor_Config[n] */
#define REG_CORE_DIGITAL_SENSOR_CONFIG0_RESET 0x00000000 /* Reset Value for REG_CORE_DIGITAL_SENSOR_CONFIG0 */
#define REG_CORE_DIGITAL_SENSOR_CONFIG1_RESET 0x00000000 /* Reset Value for REG_CORE_DIGITAL_SENSOR_CONFIG1 */
@@ -869,16 +896,18 @@
#define BITM_CORE_EXTERNAL_VOLTAGE_REFERENCE_EXT_REFIN2_VALUE 0xFFFFFFFF /* Reference Input Value */
/* -------------------------------------------------------------------------------------------------------------------------
+ CORE_AVDD_VOLTAGE Pos/Masks Description
+ ------------------------------------------------------------------------------------------------------------------------- */
+#define BITP_CORE_AVDD_VOLTAGE_AVDD_VOLTAGE 0 /* AVDD Voltage */
+#define BITM_CORE_AVDD_VOLTAGE_AVDD_VOLTAGE 0xFFFFFFFF /* AVDD Voltage */
+
+/* -------------------------------------------------------------------------------------------------------------------------
CORE_DIAGNOSTICS_CONTROL Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
-#define BITP_CORE_DIAGNOSTICS_CONTROL_DIAG_OSD_FREQ 1 /* Diagnostics Open Sensor Detect Frequency */
+#define BITP_CORE_DIAGNOSTICS_CONTROL_DIAG_OSD_FREQ 1 /* Diagnostics Sensor Detect Frequency */
#define BITP_CORE_DIAGNOSTICS_CONTROL_DIAG_MEAS_EN 0 /* Diagnostics Measure Enable */
-#define BITM_CORE_DIAGNOSTICS_CONTROL_DIAG_OSD_FREQ 0x00000006 /* Diagnostics Open Sensor Detect Frequency */
+#define BITM_CORE_DIAGNOSTICS_CONTROL_DIAG_OSD_FREQ 0x000000FE /* Diagnostics Sensor Detect Frequency */
#define BITM_CORE_DIAGNOSTICS_CONTROL_DIAG_MEAS_EN 0x00000001 /* Diagnostics Measure Enable */
-#define ENUM_CORE_DIAGNOSTICS_CONTROL_OCD_OFF 0x00000000 /* Diag_OSD_Freq: No Open-Circuit Detection During Measurement */
-#define ENUM_CORE_DIAGNOSTICS_CONTROL_OCD_PER_1_CYCLE 0x00000002 /* Diag_OSD_Freq: Open-Circuit Detection Performed Once Per Measurement Cycle */
-#define ENUM_CORE_DIAGNOSTICS_CONTROL_OCD_PER_10_CYCLES 0x00000004 /* Diag_OSD_Freq: Open-Circuit Detection Performed Once Per Ten Measurement Cycles */
-#define ENUM_CORE_DIAGNOSTICS_CONTROL_OCD_PER_100_CYCLES 0x00000006 /* Diag_OSD_Freq: Open-Circuit Detection Performed Once Per Hundred Measurement Cycles */
/* -------------------------------------------------------------------------------------------------------------------------
CORE_DATA_FIFO Pos/Masks Description
@@ -910,7 +939,7 @@
CORE_LUT_OFFSET Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
#define BITP_CORE_LUT_OFFSET_LUT_OFFSET 0 /* Offset into the Lookup Table */
-#define BITM_CORE_LUT_OFFSET_LUT_OFFSET 0x00003FFF /* Offset into the Lookup Table */
+#define BITM_CORE_LUT_OFFSET_LUT_OFFSET 0x000007FF /* Offset into the Lookup Table */
/* -------------------------------------------------------------------------------------------------------------------------
CORE_LUT_DATA Pos/Masks Description
@@ -957,6 +986,7 @@
#define ENUM_CORE_SENSOR_TYPE_RTD_4W_PT100 0x00000060 /* Sensor_Type: RTD 4 wire PT100 sensor */
#define ENUM_CORE_SENSOR_TYPE_RTD_4W_PT1000 0x00000061 /* Sensor_Type: RTD 4 wire PT1000 sensor */
#define ENUM_CORE_SENSOR_TYPE_BRIDGE_4W 0x000000A9 /* Sensor_Type: Bridge 4 wire sensor */
+#define ENUM_CORE_SENSOR_TYPE_VOLTAGE 0x00000200 /* Sensor_Type: Voltage Input */
#define ENUM_CORE_SENSOR_TYPE_CUSTOM1 0x00000400 /* Sensor_Type: Custom1 */
#define ENUM_CORE_SENSOR_TYPE_I2C_HUMIDITY_B 0x00000841 /* Sensor_Type: I2C humidity sensor B */
#define ENUM_CORE_SENSOR_TYPE_SENSOR_RESERVED_1 0x00000FE0 /* Sensor_Type: RESERVED. NOT TO BE USED */
@@ -1008,8 +1038,18 @@
/* -------------------------------------------------------------------------------------------------------------------------
CORE_CHANNEL_EXCITATION[n] Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
+#define BITP_CORE_CHANNEL_EXCITATION_IOUT_DIODE_RATIO 6 /* Modify Current Ratios Used for Diode Sensor */
#define BITP_CORE_CHANNEL_EXCITATION_IOUT_EXCITATION_CURRENT 0 /* Current Source Value */
+#define BITM_CORE_CHANNEL_EXCITATION_IOUT_DIODE_RATIO 0x000001C0 /* Modify Current Ratios Used for Diode Sensor */
#define BITM_CORE_CHANNEL_EXCITATION_IOUT_EXCITATION_CURRENT 0x0000000F /* Current Source Value */
+#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_2PT_10UA_100UA 0x00000000 /* IOUT_Diode_Ratio: 2 Current measurement 10uA 100uA */
+#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_2PT_20UA_160UA 0x00000040 /* IOUT_Diode_Ratio: 2 Current measurement 20uA 160uA */
+#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_2PT_50UA_300UA 0x00000080 /* IOUT_Diode_Ratio: 2 Current measurement 50uA 300uA */
+#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_2PT_100UA_600UA 0x000000C0 /* IOUT_Diode_Ratio: 2 Current measurement 100uA 600uA */
+#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_3PT_10UA_50UA_100UA 0x00000100 /* IOUT_Diode_Ratio: 3 current measuremet 10uA 50uA 100uA */
+#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_3PT_20UA_100UA_160UA 0x00000140 /* IOUT_Diode_Ratio: 3 current measuremet 20uA 100uA 160uA */
+#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_3PT_50UA_150UA_300UA 0x00000180 /* IOUT_Diode_Ratio: 3 current measuremet 50uA 150uA 300uA */
+#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_3PT_100UA_300UA_600UA 0x000001C0 /* IOUT_Diode_Ratio: 3 current measuremet 100uA 300uA 600uA */
#define ENUM_CORE_CHANNEL_EXCITATION_NONE 0x00000000 /* IOUT_Excitation_Current: Excitation Current Disabled */
#define ENUM_CORE_CHANNEL_EXCITATION_RESERVED 0x00000001 /* IOUT_Excitation_Current: Reserved */
#define ENUM_CORE_CHANNEL_EXCITATION_IEXC_10UA 0x00000002 /* IOUT_Excitation_Current: 10 \mu;A */
@@ -1028,9 +1068,9 @@
#define BITP_CORE_SETTLING_TIME_SETTLING_TIME 0 /* Settling Time to Allow When Switching to Channel */
#define BITM_CORE_SETTLING_TIME_SETTLING_TIME_UNITS 0x0000C000 /* Units for Settling Time */
#define BITM_CORE_SETTLING_TIME_SETTLING_TIME 0x00003FFF /* Settling Time to Allow When Switching to Channel */
-#define ENUM_CORE_SETTLING_TIME_MICROSECONDS 0x00000000 /* Settling_Time_Units: Micro-seconds */
-#define ENUM_CORE_SETTLING_TIME_MILLISECONDS 0x00004000 /* Settling_Time_Units: Milli-seconds */
-#define ENUM_CORE_SETTLING_TIME_SECONDS 0x00008000 /* Settling_Time_Units: Seconds */
+#define ENUM_CORE_SETTLING_TIME_MILLISECONDS 0x00000000 /* Settling_Time_Units: Micro-seconds */
+#define ENUM_CORE_SETTLING_TIME_SECONDS 0x00004000 /* Settling_Time_Units: Milli-seconds */
+#define ENUM_CORE_SETTLING_TIME_RESERVED 0x00008000 /* Settling_Time_Units: Seconds */
#define ENUM_CORE_SETTLING_TIME_UNDEFINED 0x0000C000 /* Settling_Time_Units: Undefined */
/* -------------------------------------------------------------------------------------------------------------------------
@@ -1070,6 +1110,12 @@
#define BITM_CORE_LOW_THRESHOLD_LIMIT_LOW_THRESHOLD 0xFFFFFFFF /* Lower Limit for Sensor Alert Comparison */
/* -------------------------------------------------------------------------------------------------------------------------
+ CORE_IDEALITY_FACTOR[n] Pos/Masks Description
+ ------------------------------------------------------------------------------------------------------------------------- */
+#define BITP_CORE_IDEALITY_FACTOR_IDEALITY_FACTOR 0 /* Diode Ideality Factor, Default 1.003. */
+#define BITM_CORE_IDEALITY_FACTOR_IDEALITY_FACTOR 0xFFFFFFFF /* Diode Ideality Factor, Default 1.003. */
+
+/* -------------------------------------------------------------------------------------------------------------------------
CORE_SENSOR_OFFSET[n] Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
#define BITP_CORE_SENSOR_OFFSET_SENSOR_OFFSET 0 /* Sensor Offset Adjustment */
@@ -1088,6 +1134,12 @@
#define BITM_CORE_CHANNEL_SKIP_CHANNEL_SKIP 0x000000FF /* Indicates If Channel Will Skip Some Measurement Cycles */
/* -------------------------------------------------------------------------------------------------------------------------
+ CORE_SENSOR_PARAMETER[n] Pos/Masks Description
+ ------------------------------------------------------------------------------------------------------------------------- */
+#define BITP_CORE_SENSOR_PARAMETER_SENSOR_PARAMETER 0 /* Sensor Parameter Adjustment */
+#define BITM_CORE_SENSOR_PARAMETER_SENSOR_PARAMETER 0xFFFFFFFF /* Sensor Parameter Adjustment */
+
+/* -------------------------------------------------------------------------------------------------------------------------
CORE_DIGITAL_SENSOR_CONFIG[n] Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
#define BITP_CORE_DIGITAL_SENSOR_CONFIG_DIGITAL_SENSOR_DATA_BITS 11 /* Number of Relevant Data Bits */