Vybhav Kadaba
/
EV-PRO-MW1001_test1
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Diff: inc/admw1001/ADMW1001_REGISTERS.h
- Revision:
- 51:f4ee8b27e600
- Parent:
- 50:d84305e5e1c0
--- a/inc/admw1001/ADMW1001_REGISTERS.h Mon Feb 17 11:23:39 2020 +0000
+++ b/inc/admw1001/ADMW1001_REGISTERS.h Fri Mar 06 07:00:50 2020 +0000
@@ -1,7 +1,7 @@
/* ================================================================================
Created by :
- Created on : 2020 Jan 08, 12:45 GMT Standard Time
+ Created on : 2019 Oct 08, 09:43 GMT Daylight Time
Project : ADMW1001_REGISTERS
File : ADMW1001_REGISTERS.h
@@ -10,7 +10,7 @@
!! ADI Confidential !!
INTERNAL USE ONLY
- Copyright (c) 2020 Analog Devices, Inc. All Rights Reserved.
+ Copyright (c) 2019 Analog Devices, Inc. All Rights Reserved.
This software is proprietary and confidential to Analog Devices, Inc. and
its licensors.
@@ -262,8 +262,6 @@
#define REG_CORE_EXTERNAL_REFERENCE_RESISTOR 0x00000050 /* CORE External Reference Resistor Value */
#define REG_CORE_EXTERNAL_VOLTAGE_REFERENCE_RESET 0x3F99999A /* Reset Value for External_Voltage_Reference */
#define REG_CORE_EXTERNAL_VOLTAGE_REFERENCE 0x00000054 /* CORE External Reference Information */
-#define REG_CORE_AVDD_VOLTAGE_RESET 0x40533333 /* Reset Value for AVDD_Voltage */
-#define REG_CORE_AVDD_VOLTAGE 0x00000058 /* CORE AVDD Voltage */
#define REG_CORE_DIAGNOSTICS_CONTROL_RESET 0x00000000 /* Reset Value for Diagnostics_Control */
#define REG_CORE_DIAGNOSTICS_CONTROL 0x0000005C /* CORE Diagnostic Control */
#define REG_CORE_DATA_FIFO_RESET 0x00000000 /* Reset Value for Data_FIFO */
@@ -279,7 +277,7 @@
#define REG_CORE_LUT_DATA_RESET 0x00000000 /* Reset Value for LUT_Data */
#define REG_CORE_LUT_DATA 0x00000074 /* CORE Data to Read/Write from Addressed LUT Entry */
#define REG_CORE_REVISION_RESET 0x01000000 /* Reset Value for Revision */
-#define REG_CORE_REVISION 0x0000008A /* CORE Hardware, Firmware Revision */
+#define REG_CORE_REVISION 0x0000008C /* CORE Hardware, Firmware Revision */
#define REG_CORE_CHANNEL_COUNTn_RESET 0x00000000 /* Reset Value for Channel_Count[n] */
#define REG_CORE_CHANNEL_COUNT0_RESET 0x00000000 /* Reset Value for REG_CORE_CHANNEL_COUNT0 */
#define REG_CORE_CHANNEL_COUNT1_RESET 0x00000000 /* Reset Value for REG_CORE_CHANNEL_COUNT1 */
@@ -582,6 +580,8 @@
#define REG_CORE_SENSOR_GAIN8_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN8 */
#define REG_CORE_SENSOR_GAIN9_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN9 */
#define REG_CORE_SENSOR_GAIN10_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN10 */
+#define REG_CORE_SENSOR_GAIN11_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN11 */
+#define REG_CORE_SENSOR_GAIN12_RESET 0x3F800000 /* Reset Value for REG_CORE_SENSOR_GAIN12 */
#define REG_CORE_SENSOR_GAIN0 0x000000AC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAIN1 0x000000EC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAIN2 0x0000012C /* CORE Sensor Gain Adjustment */
@@ -593,8 +593,10 @@
#define REG_CORE_SENSOR_GAIN8 0x000002AC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAIN9 0x000002EC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAIN10 0x0000032C /* CORE Sensor Gain Adjustment */
+#define REG_CORE_SENSOR_GAIN11 0x0000036C /* CORE Sensor Gain Adjustment */
+#define REG_CORE_SENSOR_GAIN12 0x000003AC /* CORE Sensor Gain Adjustment */
#define REG_CORE_SENSOR_GAINn(i) (REG_CORE_SENSOR_GAIN0 + ((i) * 64))
-#define REG_CORE_SENSOR_GAINn_COUNT 11
+#define REG_CORE_SENSOR_GAINn_COUNT 13
#define REG_CORE_CHANNEL_SKIPn_RESET 0x00000000 /* Reset Value for Channel_Skip[n] */
#define REG_CORE_CHANNEL_SKIP0_RESET 0x00000000 /* Reset Value for REG_CORE_CHANNEL_SKIP0 */
#define REG_CORE_CHANNEL_SKIP1_RESET 0x00000000 /* Reset Value for REG_CORE_CHANNEL_SKIP1 */
@@ -624,35 +626,6 @@
#define REG_CORE_CHANNEL_SKIP12 0x000003B2 /* CORE Indicates If Channel Will Skip Some Measurement Cycles */
#define REG_CORE_CHANNEL_SKIPn(i) (REG_CORE_CHANNEL_SKIP0 + ((i) * 64))
#define REG_CORE_CHANNEL_SKIPn_COUNT 13
-#define REG_CORE_SENSOR_PARAMETERn_RESET 0x7FC00000 /* Reset Value for Sensor_Parameter[n] */
-#define REG_CORE_SENSOR_PARAMETER0_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER0 */
-#define REG_CORE_SENSOR_PARAMETER1_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER1 */
-#define REG_CORE_SENSOR_PARAMETER2_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER2 */
-#define REG_CORE_SENSOR_PARAMETER3_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER3 */
-#define REG_CORE_SENSOR_PARAMETER4_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER4 */
-#define REG_CORE_SENSOR_PARAMETER5_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER5 */
-#define REG_CORE_SENSOR_PARAMETER6_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER6 */
-#define REG_CORE_SENSOR_PARAMETER7_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER7 */
-#define REG_CORE_SENSOR_PARAMETER8_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER8 */
-#define REG_CORE_SENSOR_PARAMETER9_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER9 */
-#define REG_CORE_SENSOR_PARAMETER10_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER10 */
-#define REG_CORE_SENSOR_PARAMETER11_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER11 */
-#define REG_CORE_SENSOR_PARAMETER12_RESET 0x7FC00000 /* Reset Value for REG_CORE_SENSOR_PARAMETER12 */
-#define REG_CORE_SENSOR_PARAMETER0 0x000000B4 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER1 0x000000F4 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER2 0x00000134 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER3 0x00000174 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER4 0x000001B4 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER5 0x000001F4 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER6 0x00000234 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER7 0x00000274 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER8 0x000002B4 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER9 0x000002F4 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER10 0x00000334 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER11 0x00000374 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETER12 0x000003B4 /* CORE Sensor Parameter Adjustment */
-#define REG_CORE_SENSOR_PARAMETERn(i) (REG_CORE_SENSOR_PARAMETER0 + ((i) * 64))
-#define REG_CORE_SENSOR_PARAMETERn_COUNT 13
#define REG_CORE_DIGITAL_SENSOR_CONFIGn_RESET 0x00000000 /* Reset Value for Digital_Sensor_Config[n] */
#define REG_CORE_DIGITAL_SENSOR_CONFIG0_RESET 0x00000000 /* Reset Value for REG_CORE_DIGITAL_SENSOR_CONFIG0 */
#define REG_CORE_DIGITAL_SENSOR_CONFIG1_RESET 0x00000000 /* Reset Value for REG_CORE_DIGITAL_SENSOR_CONFIG1 */
@@ -782,24 +755,16 @@
/* -------------------------------------------------------------------------------------------------------------------------
CORE_CYCLE_CONTROL Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
-#define BITP_CORE_CYCLE_CONTROL_PST_MEAS_EXC_CTRL 15 /* Disable Current Sources After Measurement Completes */
#define BITP_CORE_CYCLE_CONTROL_CYCLE_TIME_UNITS 14 /* Units for Cycle Time */
#define BITP_CORE_CYCLE_CONTROL_VBIAS 13 /* Voltage Bias Global Enable */
-#define BITP_CORE_CYCLE_CONTROL_GND_SW_CTRL 12 /* Ground Switch Cycle Control */
#define BITP_CORE_CYCLE_CONTROL_CYCLE_TIME 0 /* Time Between Measurement Cycles */
-#define BITM_CORE_CYCLE_CONTROL_PST_MEAS_EXC_CTRL 0x00008000 /* Disable Current Sources After Measurement Completes */
#define BITM_CORE_CYCLE_CONTROL_CYCLE_TIME_UNITS 0x00004000 /* Units for Cycle Time */
#define BITM_CORE_CYCLE_CONTROL_VBIAS 0x00002000 /* Voltage Bias Global Enable */
-#define BITM_CORE_CYCLE_CONTROL_GND_SW_CTRL 0x00001000 /* Ground Switch Cycle Control */
#define BITM_CORE_CYCLE_CONTROL_CYCLE_TIME 0x00000FFF /* Time Between Measurement Cycles */
-#define ENUM_CORE_CYCLE_CONTROL_POWERCYCLE 0x00000000
-#define ENUM_CORE_CYCLE_CONTROL_ALWAYSON 0x00008000
#define ENUM_CORE_CYCLE_CONTROL_MILLISECONDS 0x00000000 /* Cycle_Time_Units: Milli-seconds */
#define ENUM_CORE_CYCLE_CONTROL_SECONDS 0x00004000 /* Cycle_Time_Units: Seconds */
#define ENUM_CORE_CYCLE_CONTROL_VBIAS_DISABLE 0x00000000 /* Vbias: Vbias disabled */
#define ENUM_CORE_CYCLE_CONTROL_VBIAS_ENABLE 0x00002000 /* Vbias: Enable Vbias output for the duration of a cycle */
-#define ENUM_CORE_CYCLE_CONTROL_CLOSE_SW 0x00000000 /* GND_SW_CTRL: Ground Switch Closed */
-#define ENUM_CORE_CYCLE_CONTROL_CYCLE_SW 0x00001000 /* GND_SW_CTRL: Ground Switch Opens outside of measurement cycle to conserve power */
/* -------------------------------------------------------------------------------------------------------------------------
CORE_FIFO_NUM_CYCLES Pos/Masks Description
@@ -896,18 +861,16 @@
#define BITM_CORE_EXTERNAL_VOLTAGE_REFERENCE_EXT_REFIN2_VALUE 0xFFFFFFFF /* Reference Input Value */
/* -------------------------------------------------------------------------------------------------------------------------
- CORE_AVDD_VOLTAGE Pos/Masks Description
- ------------------------------------------------------------------------------------------------------------------------- */
-#define BITP_CORE_AVDD_VOLTAGE_AVDD_VOLTAGE 0 /* AVDD Voltage */
-#define BITM_CORE_AVDD_VOLTAGE_AVDD_VOLTAGE 0xFFFFFFFF /* AVDD Voltage */
-
-/* -------------------------------------------------------------------------------------------------------------------------
CORE_DIAGNOSTICS_CONTROL Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
-#define BITP_CORE_DIAGNOSTICS_CONTROL_DIAG_OSD_FREQ 1 /* Diagnostics Sensor Detect Frequency */
+#define BITP_CORE_DIAGNOSTICS_CONTROL_DIAG_OSD_FREQ 1 /* Diagnostics Open Sensor Detect Frequency */
#define BITP_CORE_DIAGNOSTICS_CONTROL_DIAG_MEAS_EN 0 /* Diagnostics Measure Enable */
-#define BITM_CORE_DIAGNOSTICS_CONTROL_DIAG_OSD_FREQ 0x000000FE /* Diagnostics Sensor Detect Frequency */
+#define BITM_CORE_DIAGNOSTICS_CONTROL_DIAG_OSD_FREQ 0x00000006 /* Diagnostics Open Sensor Detect Frequency */
#define BITM_CORE_DIAGNOSTICS_CONTROL_DIAG_MEAS_EN 0x00000001 /* Diagnostics Measure Enable */
+#define ENUM_CORE_DIAGNOSTICS_CONTROL_OCD_OFF 0x00000000 /* Diag_OSD_Freq: No Open-Circuit Detection During Measurement */
+#define ENUM_CORE_DIAGNOSTICS_CONTROL_OCD_PER_1_CYCLE 0x00000002 /* Diag_OSD_Freq: Open-Circuit Detection Performed Once Per Measurement Cycle */
+#define ENUM_CORE_DIAGNOSTICS_CONTROL_OCD_PER_10_CYCLES 0x00000004 /* Diag_OSD_Freq: Open-Circuit Detection Performed Once Per Ten Measurement Cycles */
+#define ENUM_CORE_DIAGNOSTICS_CONTROL_OCD_PER_100_CYCLES 0x00000006 /* Diag_OSD_Freq: Open-Circuit Detection Performed Once Per Hundred Measurement Cycles */
/* -------------------------------------------------------------------------------------------------------------------------
CORE_DATA_FIFO Pos/Masks Description
@@ -939,7 +902,7 @@
CORE_LUT_OFFSET Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
#define BITP_CORE_LUT_OFFSET_LUT_OFFSET 0 /* Offset into the Lookup Table */
-#define BITM_CORE_LUT_OFFSET_LUT_OFFSET 0x000007FF /* Offset into the Lookup Table */
+#define BITM_CORE_LUT_OFFSET_LUT_OFFSET 0x00003FFF /* Offset into the Lookup Table */
/* -------------------------------------------------------------------------------------------------------------------------
CORE_LUT_DATA Pos/Masks Description
@@ -986,7 +949,6 @@
#define ENUM_CORE_SENSOR_TYPE_RTD_4W_PT100 0x00000060 /* Sensor_Type: RTD 4 wire PT100 sensor */
#define ENUM_CORE_SENSOR_TYPE_RTD_4W_PT1000 0x00000061 /* Sensor_Type: RTD 4 wire PT1000 sensor */
#define ENUM_CORE_SENSOR_TYPE_BRIDGE_4W 0x000000A9 /* Sensor_Type: Bridge 4 wire sensor */
-#define ENUM_CORE_SENSOR_TYPE_VOLTAGE 0x00000200 /* Sensor_Type: Voltage Input */
#define ENUM_CORE_SENSOR_TYPE_CUSTOM1 0x00000400 /* Sensor_Type: Custom1 */
#define ENUM_CORE_SENSOR_TYPE_I2C_HUMIDITY_B 0x00000841 /* Sensor_Type: I2C humidity sensor B */
#define ENUM_CORE_SENSOR_TYPE_SENSOR_RESERVED_1 0x00000FE0 /* Sensor_Type: RESERVED. NOT TO BE USED */
@@ -1038,18 +1000,8 @@
/* -------------------------------------------------------------------------------------------------------------------------
CORE_CHANNEL_EXCITATION[n] Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
-#define BITP_CORE_CHANNEL_EXCITATION_IOUT_DIODE_RATIO 6 /* Modify Current Ratios Used for Diode Sensor */
#define BITP_CORE_CHANNEL_EXCITATION_IOUT_EXCITATION_CURRENT 0 /* Current Source Value */
-#define BITM_CORE_CHANNEL_EXCITATION_IOUT_DIODE_RATIO 0x000001C0 /* Modify Current Ratios Used for Diode Sensor */
#define BITM_CORE_CHANNEL_EXCITATION_IOUT_EXCITATION_CURRENT 0x0000000F /* Current Source Value */
-#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_2PT_10UA_100UA 0x00000000 /* IOUT_Diode_Ratio: 2 Current measurement 10uA 100uA */
-#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_2PT_20UA_160UA 0x00000040 /* IOUT_Diode_Ratio: 2 Current measurement 20uA 160uA */
-#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_2PT_50UA_300UA 0x00000080 /* IOUT_Diode_Ratio: 2 Current measurement 50uA 300uA */
-#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_2PT_100UA_600UA 0x000000C0 /* IOUT_Diode_Ratio: 2 Current measurement 100uA 600uA */
-#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_3PT_10UA_50UA_100UA 0x00000100 /* IOUT_Diode_Ratio: 3 current measuremet 10uA 50uA 100uA */
-#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_3PT_20UA_100UA_160UA 0x00000140 /* IOUT_Diode_Ratio: 3 current measuremet 20uA 100uA 160uA */
-#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_3PT_50UA_150UA_300UA 0x00000180 /* IOUT_Diode_Ratio: 3 current measuremet 50uA 150uA 300uA */
-#define ENUM_CORE_CHANNEL_EXCITATION_DIODE_3PT_100UA_300UA_600UA 0x000001C0 /* IOUT_Diode_Ratio: 3 current measuremet 100uA 300uA 600uA */
#define ENUM_CORE_CHANNEL_EXCITATION_NONE 0x00000000 /* IOUT_Excitation_Current: Excitation Current Disabled */
#define ENUM_CORE_CHANNEL_EXCITATION_RESERVED 0x00000001 /* IOUT_Excitation_Current: Reserved */
#define ENUM_CORE_CHANNEL_EXCITATION_IEXC_10UA 0x00000002 /* IOUT_Excitation_Current: 10 \mu;A */
@@ -1068,32 +1020,40 @@
#define BITP_CORE_SETTLING_TIME_SETTLING_TIME 0 /* Settling Time to Allow When Switching to Channel */
#define BITM_CORE_SETTLING_TIME_SETTLING_TIME_UNITS 0x0000C000 /* Units for Settling Time */
#define BITM_CORE_SETTLING_TIME_SETTLING_TIME 0x00003FFF /* Settling Time to Allow When Switching to Channel */
-#define ENUM_CORE_SETTLING_TIME_MILLISECONDS 0x00000000 /* Settling_Time_Units: Micro-seconds */
-#define ENUM_CORE_SETTLING_TIME_SECONDS 0x00004000 /* Settling_Time_Units: Milli-seconds */
-#define ENUM_CORE_SETTLING_TIME_RESERVED 0x00008000 /* Settling_Time_Units: Seconds */
+#define ENUM_CORE_SETTLING_TIME_MICROSECONDS 0x00000000 /* Settling_Time_Units: Micro-seconds */
+#define ENUM_CORE_SETTLING_TIME_MILLISECONDS 0x00004000 /* Settling_Time_Units: Milli-seconds */
+#define ENUM_CORE_SETTLING_TIME_SECONDS 0x00008000 /* Settling_Time_Units: Seconds */
#define ENUM_CORE_SETTLING_TIME_UNDEFINED 0x0000C000 /* Settling_Time_Units: Undefined */
/* -------------------------------------------------------------------------------------------------------------------------
CORE_MEASUREMENT_SETUP[n] Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
#define BITP_CORE_MEASUREMENT_SETUP_BUFFER_BYPASS 15 /* Disable Buffers */
+#define BITP_CORE_MEASUREMENT_SETUP_GND_SW 13 /* Ground Switch Selection */
#define BITP_CORE_MEASUREMENT_SETUP_ADC_FILTER_TYPE 12 /* ADC Digital Filter Type */
#define BITP_CORE_MEASUREMENT_SETUP_CHOP_MODE 10 /* Enabled and Disable Chop Mode */
+#define BITP_CORE_MEASUREMENT_SETUP_PST_MEAS_EXC_CTRL 9 /* Disable Current Sources After Measurement Completes */
#define BITP_CORE_MEASUREMENT_SETUP_NOTCH_EN_2 8 /* Enable Notch 2 Filter Mode */
#define BITP_CORE_MEASUREMENT_SETUP_ADC_SF 0 /* ADC Digital Filter Speed */
#define BITM_CORE_MEASUREMENT_SETUP_BUFFER_BYPASS 0x00008000 /* Disable Buffers */
+#define BITM_CORE_MEASUREMENT_SETUP_GND_SW 0x00006000 /* Ground Switch Selection */
#define BITM_CORE_MEASUREMENT_SETUP_ADC_FILTER_TYPE 0x00001000 /* ADC Digital Filter Type */
#define BITM_CORE_MEASUREMENT_SETUP_CHOP_MODE 0x00000C00 /* Enabled and Disable Chop Mode */
+#define BITM_CORE_MEASUREMENT_SETUP_PST_MEAS_EXC_CTRL 0x00000200 /* Disable Current Sources After Measurement Completes */
#define BITM_CORE_MEASUREMENT_SETUP_NOTCH_EN_2 0x00000100 /* Enable Notch 2 Filter Mode */
#define BITM_CORE_MEASUREMENT_SETUP_ADC_SF 0x0000007F /* ADC Digital Filter Speed */
#define ENUM_CORE_MEASUREMENT_SETUP_BUFFERS_ENABLED 0x00000000 /* Buffer_Bypass: Input buffers enabled */
#define ENUM_CORE_MEASUREMENT_SETUP_BUFFERS_DISABLED 0x00008000 /* Buffer_Bypass: Input buffers disabled */
+#define ENUM_CORE_MEASUREMENT_SETUP_GND_SW_OPEN 0x00000000 /* GND_SW: GND_SW Open. The ground switch is not enabled for the sensor measurement */
+#define ENUM_CORE_MEASUREMENT_SETUP_GND_SW_CLOSED 0x00002000 /* GND_SW: GND_SW Closed. The ground switch is enabled for the sensor measurement, bit wiil Remain Closed After the Measurement */
#define ENUM_CORE_MEASUREMENT_SETUP_ENABLE_SINC4 0x00000000 /* ADC_Filter_Type: Enabled SINC4 filter */
#define ENUM_CORE_MEASUREMENT_SETUP_ENABLE_SINC3 0x00001000 /* ADC_Filter_Type: Enabled SINC3 filter */
#define ENUM_CORE_MEASUREMENT_SETUP_DISABLE_CHOP 0x00000000 /* Chop_Mode: ADC front end chopping disabled */
#define ENUM_CORE_MEASUREMENT_SETUP_HW_CHOP 0x00000400 /* Chop_Mode: Hardware chopping enabled */
#define ENUM_CORE_MEASUREMENT_SETUP_SW_CHOP 0x00000800 /* Chop_Mode: SW chop enabled */
#define ENUM_CORE_MEASUREMENT_SETUP_HW_SW_CHOP 0x00000C00 /* Chop_Mode: Hardware and software chop enabled */
+#define ENUM_CORE_MEASUREMENT_SETUP_POWERCYCLE 0x00000000
+#define ENUM_CORE_MEASUREMENT_SETUP_ALWAYSON 0x00000200
#define ENUM_CORE_MEASUREMENT_SETUP_NOTCH_DIS 0x00000000 /* NOTCH_EN_2: Disable notch filter */
#define ENUM_CORE_MEASUREMENT_SETUP_NOTCH_EN 0x00000100 /* NOTCH_EN_2: Enable notch 2 filter option. */
@@ -1110,12 +1070,6 @@
#define BITM_CORE_LOW_THRESHOLD_LIMIT_LOW_THRESHOLD 0xFFFFFFFF /* Lower Limit for Sensor Alert Comparison */
/* -------------------------------------------------------------------------------------------------------------------------
- CORE_IDEALITY_FACTOR[n] Pos/Masks Description
- ------------------------------------------------------------------------------------------------------------------------- */
-#define BITP_CORE_IDEALITY_FACTOR_IDEALITY_FACTOR 0 /* Diode Ideality Factor, Default 1.003. */
-#define BITM_CORE_IDEALITY_FACTOR_IDEALITY_FACTOR 0xFFFFFFFF /* Diode Ideality Factor, Default 1.003. */
-
-/* -------------------------------------------------------------------------------------------------------------------------
CORE_SENSOR_OFFSET[n] Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
#define BITP_CORE_SENSOR_OFFSET_SENSOR_OFFSET 0 /* Sensor Offset Adjustment */
@@ -1134,12 +1088,6 @@
#define BITM_CORE_CHANNEL_SKIP_CHANNEL_SKIP 0x000000FF /* Indicates If Channel Will Skip Some Measurement Cycles */
/* -------------------------------------------------------------------------------------------------------------------------
- CORE_SENSOR_PARAMETER[n] Pos/Masks Description
- ------------------------------------------------------------------------------------------------------------------------- */
-#define BITP_CORE_SENSOR_PARAMETER_SENSOR_PARAMETER 0 /* Sensor Parameter Adjustment */
-#define BITM_CORE_SENSOR_PARAMETER_SENSOR_PARAMETER 0xFFFFFFFF /* Sensor Parameter Adjustment */
-
-/* -------------------------------------------------------------------------------------------------------------------------
CORE_DIGITAL_SENSOR_CONFIG[n] Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
#define BITP_CORE_DIGITAL_SENSOR_CONFIG_DIGITAL_SENSOR_DATA_BITS 11 /* Number of Relevant Data Bits */